Three‐component One‐pot Synthetic Route to Functionalized N‐Phenyl‐ and N,N‐(1,4‐phenylene)‐2‐alkylimino‐2,3‐dihydrothiazoles under Mild,Solvent‐ and Catalyst‐free Conditions

A simple and efficient one‐pot synthesis of alkyl‐2‐(alkylimino)‐4‐methyl‐3‐phenyl‐2,3‐dihydrothiazole‐5‐carboxylate and dialkyl 3,3′‐(1,4‐phenylene)‐bis‐[2‐(alkylimino)‐4‐methyl‐2,3‐dihydrothiazole‐5‐carboxylate] derivatives from the reaction of phenylisothiocyanate (and also 1,4‐phenylene diisothiocyanate) and primary alkylamines in the presence of 2‐chloro‐1,3‐dicarbonyl compounds is described. This new protocol has several advantages such as lack of necessity of the catalyst and solvent, good yields,mild conditions and short times for reaction.     

Efficient Preparation of 2, 2′‐Disubstituted‐3, 3′‐(1, 4‐phenylene)bis‐thienopyrimidin‐4‐ones Based on an aza‐Wittig Reaction

Tandem aza‐Wittig reaction of iminophosphorane with 1, 4‐phenylene diisocyanate followed by intramolecular heteroconjugate addition annulation after addition of a nucleophilic reagent (amine, phenol, and alcohol), in the presence of catalytic K₂CO₃ or NaOR, gives selectively the functionalized substituted 2, 2′‐di(alkylamino, aryloxy)‐3, 3′‐(1, 4‐phenylene)bis(thieno[3, 2‐d]pyrimidin‐4(3H)‐ones) and 2, 2′‐di(alkylamino or alkoxy)‐3, 3′‐(1, 4‐phenylene)bis(3, 5, 6, 7‐tetrahydro‐4H‐cyclopenta[4, 5]thieno[2, 3‐d]pyrimidin‐4‐ones).     

Silylhydrazine und dimere N,N′‐Dilithium‐N,N′‐bis(silyl)hydrazide – Synthesen,Reaktionen, Isomerisierungen

Silylhydrazines and Dimeric N,N′‐Dilithium‐N,N′‐bis(silyl)hydrazides – Syntheses, Reactions, Isomerisations Di‐tert.‐butylchlorosilane reacts with dilithiated hydrazine in a molar ratio to give the N,N′‐bis(silyl)hydrazine, [(Me₃C)₂SiHNH]₂, ( 5 ). Isomeric tris(silyl)hydrazines, N‐difluorophenylsilyl‐N′,N′‐bis(dimethylphenylsilyl)hydrazine ( 7 ) and N‐difluorophenylsilyl‐N,N′‐bis(dimethylphenylsilyl)hydrazine ( 8 ) are formed in the reaction of N‐lithium‐N′‐N′‐bis(dimethylphenylsilyl)hydrazide and F₃SiPh. Isomeric bis(silyl)hydrazines, (Me₃C)₂SiFNHNHSiMe₂Ph ( 9 ) and (Me₃C)₂‐ SiF(PhMe₂Si)N–NH₂ ( 10 ) are the result of the reaction of di‐tert.‐butylfluorosilylhydrazine and ClSiMe₂Ph in the presence of Et₃N. Quantum chemical calculations for model compounds demonstrate the dyotropic course of the rearrangement. The monolithium derivative of 5 forms a N‐lithium‐N′,N′‐bis(silyl)hydrazide ( 11 ). The dilithium salts of 5 ( 13 ) and of the bis(tert.‐butyldiphenylsilyl)hydrazine ( 12 ) crystallize as dimers with formation of a central Li₄N₄ unit. The formation of 12 from 11 occurs via a N′ → N‐silyl group migration. Results of crystal structure analyses are reported.     

Syntheses,Structure, Electrochemistry,and Optical Properties of 1,3‐Diethyl‐2,3‐dihydro‐1‐H‐1,3,2‐pyrido‐[4,5‐b]‐diazaboroles

Reaction of 2,5‐bis(dibromoboryl)thiophene ( 4 ) or 1,4‐bis(dibromoboryl)benzene ( 6 ) with two equivalents of N,N′‐dilithiated 2,3‐diaminopyridine ( 3 ) led to the generation of the pyridodiazaboroles 5 and 7 in which the two diazaborole rings are linked by 2,5‐thiophen‐diyl or 1,4‐phenylene units via the boron atom. The novel compounds were characterized by elemental analyses and spectroscopy (¹H‐, ¹¹B‐, ¹³C‐NMR, MS, and UV‐VIS). The molecular structure of 5 was elucidated by X‐ray diffraction. Cyclovoltammograms of 5 and 7 show two irreversible oxidation waves at 0.76 and 0.73 V, respectively vs Fc/Fc⁺. The novel compounds display intense blue luminescence with Stokes shifts of 76 and 74 nm and relative quantum yields of 39 and 43 % vs Coumarin 120 (Φ = 50 %).     

Synthesis and characterization of some new 4,4′‐(1,4‐phenylene)dipyrimidine and 6,6′‐(1,4‐phenylene)‐di(pyridin‐2(1H)‐one) derivatives

A series of new 4,4′‐(1,4‐phenylene)dipyrimidines 5a–c, 8a–c , and 10a,b have been synthesized from the reaction of amidines 1a–c with the dienaminone 2 , bis‐chalcone 6 , or ylidenemalono‐ nitrile 9 . The reaction of malononitrile and ethyl cyanoacetate with 2 gave 6,6′‐(1,4‐phenylene)di(pyridin‐2(1H)‐ones) ( 15a,b ). The structures of the products were proved by elemental analyses, IR, MS, ¹H, and ¹³C NMR spectroscopy. © 2005 Wiley Periodicals, Inc. Heteroatom Chem 16:507–512, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20150     

Study of 1,3‐Dipolar Cycloaddition and Ring Contraction of New 1,4‐Phenylene‐bis[1,5]benzothiazepine Derivatives

Some 1,4‐phenylene‐bis[1,2,4]oxadiazolo‐[5,4‐d][1,5]benzothiazepine derivatives ( 4a , 4b , 4c ) were synthesized by 1,3‐dipolar cycloaddition reaction of benzohydroximinoyl chloride with 1,4‐phenylene‐bis(4‐aryl)‐2,3‐dihydro[1,5]benzothiazepine ( 2a , 2b , 2c ); meanwhile, compounds 2a , 2b , 2c also occurred ring contraction under acylating condition to obtain bis[2‐aryl‐2′‐(β‐1,4‐phenylenevinyl)‐3‐acetyl]‐2,3‐dihydro[1,5]benzothiazoles ( 3a , 3b , 3c ). The structures of some novel compounds were confirmed by IR, ¹H‐NMR, elemental, and X‐ray crystallographic analysis.     

Stereoselective Synthesis of [5‐[4,4,4,4′,4′,4′‐Hexafluoro‐N‐(2‐hydroxyethoxy)‐D‐valine]]‐ and [5‐[4,4,4,4′,4′,4′‐Hexafluoro‐N‐(2‐hydroxyethoxy)‐L‐valine]cyclosporin A

Addition of various amines to the 3,3‐bis(trifluoromethyl)acrylamides 10a and 10b gave the tripeptides 11a – 11f , mostly as mixtures of epimers (Scheme 3). The crystalline tripeptide 11f ₂ was found to be the N‐terminal (2‐hydroxyethoxy)‐substituted (R,S,S)‐ester HOCH₂CH₂O‐D ‐Val(F₆)‐MeLeu‐Ala‐O^tBu by X‐ray crystallography. The C‐terminal‐protected tripeptide 11f ₂ was condensed with the N‐terminus octapeptide 2b to the depsipeptide 12a which was thermally rearranged to the undecapeptide 13a (Scheme 4). The condensation of the epimeric tripeptide 11f ₁ with the octapeptide 2b gave the undecapeptide 13b directly. The undecapeptides 13a and 13b were fully deprotected and cyclized to the [5‐[4,4,4,4′,4′,4′‐hexafluoro‐N‐(2‐hydroxyethoxy)‐D ‐valine]]‐ and [5‐[4,4,4,4′,4′,4′‐hexafluoro‐N‐(2‐hydroxyethoxy)‐L ‐valine]]cyclosporins 14a and 14b , respectively (Scheme 5). Rate differences observed for the thermal rearrangements of 12a to 13a and of 12b to 13b are discussed.     

An unusual polycatenating network self‐assembled by the 2D → 2D parallel → 3D parallel interpenetration of coordinative and hydrogen‐bonded (6,3) motifs

In the title coordination compound, catena‐poly[[[bis[diaquacadmium(II)]‐μ₂‐trans‐1,2‐bis(4‐pyridyl)ethene]bis{μ₂‐2,2′‐[(5‐carboxymethoxy‐m‐phenylene)dioxy]diacetato}] trans‐1,2‐bis(4‐pyridyl)ethene solvate dihydrate], {[Cd₂(C₁₂H₁₀O₉)₂(C₁₂H₁₀N₂)(H₂O)₄]·C₁₂H₁₀N₂·2H₂O}_n, (I), each Cd^II centre adopts a pentagonal–bipyramidal coordination geometry. The incompletely deprotonated 2,2′‐[(5‐carboxymethoxy‐m‐phenylene)dioxy]diacetate (TCMB) ligands and trans‐1,2‐bis(4‐pyridyl)ethene (bpe) ligands both act as bidentate bridges, linking the Cd^II centres into one‐dimensional ladders, which are connected into an undulating two‐dimensional (6,3) layer through O—H...N hydrogen bonds between the carboxylate groups of the TCMB ligands and the N atoms of the uncoordinated bpe ligands. Each undulating layer polycatenates two other identical layers, exhibiting the unusual combination of both 2D → 2D parallel and 2D → 3D parallel interpenetration (2D and 3D are two‐ and three‐dimensional, respectively).     

Synthesis and antimicrobial activity of 2,10‐dichloro‐6‐substituted‐4,8‐dinitro‐12H‐dibenzo[d,g][1,3,2]dioxaphosphocin 6‐oxides/sulfides

Novel 2,10‐dichloro‐6‐substituted‐4,8‐dinitro‐12H‐dibenzo[d,g][1,3,2]dioxaphosphocin 6‐oxides ( 4a–h ) were synthesized by reacting 5,5′‐dichloro‐3,3′‐dinitro‐2,2′‐dihydroxydiphenylmethane ( 2 ) with different aryl phosphorodichloridates ( 3a–g ) or bis(2‐chloroethyl)phosphoramidic dichloride ( 3h ) in the presence of triethylamine at 55–60°C, and the compounds 4i–l were prepared by reacting the 2,6,10‐trichloro‐4,8‐dinitro‐12H‐dibenzo[d,g][1,3,2]dioxaphosphocin 6‐sulfide ( 5 ) in situ with substituted phenols and thiophenol 5 was prepared by condensing 2 with thiophosphoryl chloride. IR, ¹H, ¹³C, ³¹P NMR, and mass spectra supported all the proposed structures. Several title compounds exhibited significant activity in the assays against the bacteria Bacillus subtilis and Escherichia coli and fungi Curvularia lunata and Aspergillus niger. © 2001 John Wiley & Sons, Inc. Heteroatom Chem 12:10–15, 2001     

1,2‐Diaza‐3‐silacyclopent‐5‐ene – Synthese und Reaktionen

1,2‐Diaza‐3‐silacyclopent‐5‐ene – Synthesis and Reactions The dilithium salt of bis(tert‐butyl‐trimethylsilylmethylen)ketazine ( 1 ) forms an imine‐enamine salt. 1 reacts with halosilanes in a molar ratio of 1:1 to give 1,2‐diaza‐3‐silacyclopent‐5‐enes. Me₃SiCH=CCMe₃ [N(SiR,R′)‐N=C‐C]HSiMe₃ ( 2 ‐ 7 ). ( 2 : R,R′ = Cl; 3 : R = CH₃, R′ = Ph; 4 : R = F, R′ = CMe₃; 5 : R = F, R′ = Ph; 6 : R = F, R′ = N(SiMe₃)₂; 7 : R = F, R′ = N(CMe₃)SiMe₃). In the reaction of 1 with tetrafluorosilane the spirocyclus 8 is isolated. The five‐membered ring compounds 2 ‐ 7 and compound 9 substituted on the silicon‐fluoro‐ and (tert‐butyltrimethylsilyl) are acid at the C(4)‐atom and therefore can be lithiated. Experiments to prepare lithium salts of 4 with MeLi, n‐BuLi and PhLi gave LiF and the substitution‐products 10 ‐ 12 . 9 forms a lithium salt which reacts with ClSiMe₃ to give LiCl and the SiMe₃ ring system ( 13 ) substituted at the C(4)‐atom. The ring compounds 3 ‐ 7 and 10 ‐ 12 form isomers, the formation is discussed. Results of the crystal structure and analyses of 8 , 10 , 12 , and 13 are presented.     

Synthesis and electroluminescent properties of a novel 1,3,4‐oxadiazole‐containing polymer

The new blue light polymer, poly(1′,4′‐phenylene‐1″,4″‐[2″‐(2″″‐ethylhexyloxy)]phenylene‐1‴,4‴‐phenylene‐2,5‐oxadiazolyl) (PPEPPO) was synthesized through the Suzuki reaction of diboronic acid, 2‐methoxy‐[5‐(2′‐ethylhexyl)oxy]‐1,4‐benzene diboronic acid (MEHBBA) and dibromide, 2,5‐bis(4′‐bromophenyl)‐1,3,4‐oxadiazole. This polymer was characterized with various spectroscopic methods. The solid PL spectrum of PPEPPO has a maximum peak at 444 nm corresponding to blue light. Blue LED has been fabricated using this polymer as the electroluminescent layer, ITO as the anode, and aluminum as cathode. This device emitted a blue light, with 40 V of turn‐on voltage. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3086–3091, 2000     

Halogenation of Fluorinated 1,3,5‐Triketones

The behavior of linear and cyclic fluorinated 1,3,5‐triketones and their metal derivatives towards common halogenating agents was examined, and optimal reaction conditions for the straightforward synthesis of mono‐, di‐, and tetrahalogenated products were found (Schemes 1–3). An aromatization through a double HBr elimination from an α,α′‐dibrominated cyclohexanone was shown to be a promising synthetic route to 1,1′‐(2‐hydroxy‐1,3‐phenylene)bis[2,2,2‐trifluoroethanones] (= 2,6‐bis(trifluoroacetyl)phenols; Scheme 4). Additionally, the 1,3,5‐triketones prepared add readily H₂O or alcohols to produce novel bridged 2,6‐dihydroxypyran‐4‐ones (Scheme 2). The structure of the obtained compounds 6a and 7a was confirmed by X‐ray structure analysis.     

Cationic,water‐soluble,fluorene‐containing poly(arylene ethynylene)s: Effects of water solubility on aggregation,photoluminescence efficiency,and amplified fluorescence quenching in aqueous solutions

Three novel fluorene‐containing poly(arylene ethynylene)s with amino‐functionalized side groups were synthesized through the Sonogashira reaction. They were poly{9,9‐bis[6′‐(N,N‐diethylamino)hexyl]‐2,7‐fluorenylene ethynylene}‐alt‐co‐{2,5‐bis[3′‐(N,N‐diethylamino)‐1′‐oxapropyl]‐1,4‐phenylene} ( P1 ), poly{9,9‐bis[6′‐(N,N‐diethylamino)hexyl]‐2,7‐fluorenylene ethynylene} ( P2 ), and poly({9,9‐bis[6′‐(N,N‐diethylamino)hexyl]‐2,7‐fluorenylene ethynylene}‐alt‐co‐(1,4‐phenylene)) ( P3 ). Through the postquaternization treatment of P1 – P3 with methyl iodide, we obtained their cationic water‐soluble conjugated polyelectrolytes (WSCPs): P1′ – P3′ . The water solubility was gradually improved from P3′ to P1′ with increasing contents of hydrophilic side chains. After examining the ultraviolet–visible absorption and photoluminescence (PL) spectra, fluorescence lifetimes, and dynamic light scattering data, we propose that with the reduction of the water solubility from P1′ to P3′ , they exhibited a gradually increased degree of aggregation in H₂O. The PL quantum yields of P1′ – P3′ in H₂O displayed a decreasing tendency consistent with the increased degree of aggregation, suggesting that the pronounced degree of aggregation was an important reason for the low PL quantum yields of WSCPs in H₂O. Two structurally analogous water‐soluble trimers of P2′ and P3′ , model compounds 2,7‐bis(9″,9″‐bis{6‴‐[(N,N‐diethyl)‐N‐methylammonium] hexyl}‐2″‐fluorenylethynyl)‐9,9‐bis{6′‐[(N,N‐diethyl)‐N‐methylammonium]hexyl}fluorene hexaiodide and 1,4‐bis(9′,9′‐bis{6″‐[(N,N‐diethyl)‐N‐methylammonium]hexyl}‐2′‐fluorenylethynyl)benzene tetraiodide, were synthesized. The amplified fluorescence quenching of these WSCPs by Fe(CN)₆⁴⁻ in H₂O was studied by comparison with a corresponding analogous trimer. The effects of aggregation on the fluorescence quenching may be two‐edged in these cases. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5778–5794, 2006     

Synthesis and characterization of a novel reactive ladderlike 4,4′‐phenylene ether‐bridged polyvinylsiloxane

A novel soluble, reactive ladderlike 4,4′‐phenylene ether‐bridged polyvinylsiloxane (L) was synthesized successfully for the first time by a stepwise coupling polymerization (SCP) including hydrolysis and polycondensation. The monomer, 4,4′‐bis(vinyldimethoxysilyl)phenylene ether (M), was synthesized by Grignard reaction. The structures of the monomer and the polymer were characterized by infrared spectrometry (IR), nuclear magnetic resonance (¹H NMR, ¹³C NMR, ²⁹Si NMR), mass spectrometry (MS), differential scanning calorimetry (DSC), X‐ray diffraction (XRD), and gel permeation chromatography (GPC). It is proposed from the characterization data that the polymer possesses an ordered ladderlike structure. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2702–2710, 2000     

Synthesis,crystal structure and photophysical properties of 1,4‐bis(1,3‐diazaazulen‐2‐yl)benzene: a new π building block

A dimerized 1,3‐diazaazulene derivative, namely 1,4‐bis(1,3‐diazaazulen‐2‐yl)benzene [or 2,2′‐(1,4‐phenylene)bis(1,3‐diazaazulene)], C₂₂H₁₄N₄, (I), has been synthesized successfully through the condensation reaction between 2‐methoxytropone and benzene‐1,4‐dicarboximidamide hydrochloride, and was characterized by ¹H NMR and ¹³C NMR spectroscopies, and ESI–MS. X‐ray diffraction analysis reveals that (I) has a nearly planar structure with good π‐electron delocalization, indicating that it might serve as a π building block. The crystal belongs to the monoclinic system. One‐dimensional chains were formed along the a axis through π–π interactions and adjacent chains are stabilized by C—H…N interactions, forming a three‐dimensional architecture. The solid emission of (I) in the crystalline form exhibited a 170 nm red shift compared with that in the solution state. The observed optical bandgap for (I) is 3.22 eV and a cyclic voltammetry experiment confirmed the energy levels of the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO). The calculated bandgap for (I) is 3.37 eV, which is very close to the experimental result. In addition, the polarizability and hyperpolarizability of (I) were appraised for its further application in second‐order nonlinear optical materials.     

Electronic spectra and first‐order hyperpolarizability of 4‐(dicyanomethylene)‐2,6‐bis‐ (2′‐thiophene‐vinyl)‐pyran derivatives

On the basis of the ZINDO program, we have designed a program to calculate the first‐order hyperpolarizability β_ijk and β_μ according to the sum‐over‐states (SOS) expression. The first‐order hyperpolarizability of 4‐(dicyanomethylene)‐2,6‐bis‐(2′‐thiophene‐vinyl)‐pyran derivatives were studied. The calculated results were that the 4‐(dicyanomethylene)‐2,6‐bis‐(2′‐thiophene‐vinyl)‐pyran derivatives exhibit good nonlinearity with their β₀ values, which are slightly less than that of the corresponding 2,6‐bis‐styryl‐4‐(dicyanomethylene)‐pyran derivatives. It does not agree with the auxiliary donor–acceptor effects theory. The 4‐(dicyanomethylene)‐2,6‐bis‐(2′‐thiophene‐vinyl)‐pyran derivatives, having two low‐lying electronic excited states that contribute to the molecular hyperpolarizability in an additive manner, are good candidates as chromophores due to their high nonlinearities and good thermal stability. © 2001 John Wiley & Sons, Inc. Int J Quant Chem 82: 65–72, 2001     

Ultrasound‐Promoted Catalyst‐Free Synthesis of 2,2′‐(1,4‐Phenylene)bis[1‐acetyl‐1,2‐dihydro‐4H‐3,1‐benzoxazin‐4‐one] Derivatives

A convenient approach to 2,2′‐(1,4‐phenylene)bis[1‐acetyl‐1,2‐dihydro‐4H‐3,1‐benzoxazin‐4‐one] derivatives 4 was explored employing the one‐pot condensation of anthranilic acids (=2‐aminobenzoic acids) 1 with terephthalaldehyde (=benzene‐1,4‐dicarboxaldehyde; 2 ) under ultrasound‐irradiation conditions (Scheme 1). The reactions proceeded smoothly in the presence of excess Ac₂O in the absence of any other catalyst and solvent to afford the respective products in high yields.     

A new two‐dimensional managnese(II) coordination polymer constructed by 2,2′‐(1,2‐phenylene)bis(1H‐imidazole‐4,5‐dicarboxylate)

In recent years, N‐heterocyclic carboxylate ligands have attracted much interest in the preparation of new coordination polymers since they contain N‐atom donors, as well as O‐atom donors, and have a rich variety of coordination modes which can lead to polymers with intriguing structures and interesting properties. A new two‐dimensional coordination polymer, namely poly[[μ₃‐2,2′‐(1,2‐phenylene)bis(4‐carboxy‐1H‐imidazole‐5‐carboxylato)‐κ⁶O⁴,N³,N^3′,O^4′:O⁵:O^5′]manganese(II)], [Mn(C₁₆H₈N₄O₈)]_n or [Mn(H₄Phbidc)]_n, has been synthesized by the reaction of Mn(OAc)₂·4H₂O (OAc is acetate) with 2,2′‐(1,2‐phenylene)bis(1H‐imidazole‐4,5‐dicarboxylic acid) (H₆Phbidc) under solvothermal conditions. In the polymer, each Mn^II ion is six‐coordinated by two N atoms from one H₄Phbidc²⁻ ligand and by four O atoms from three H₄Phbidc²⁻ ligands, forming a significantly distorted octahedral MnN₂O₄ coordination geometry. The Mn^II ions are linked by hexadentate H₄Phbidc²⁻ ligands, leading to a two‐dimensional structure parallel to the ac plane. In the crystal, adjacent layers are further connected by N—H…O hydrogen bonds, forming a three‐dimensional structure in the solid state.     

Synthesis and characterization of novel polyamide‐imides containing noncoplanar 2,2′‐dimethyl‐4,4′‐biphenylene unit

A new diimide‐dicarboxylic acid, 2,2′‐dimethyl‐4,4′‐bis(4‐trimellitimidophenoxy)biphenyl (DBTPB), containing a noncoplanar 2,2′‐dimethyl‐4,4′‐biphenylene unit was synthesized by the condensation reaction of 2,2′‐dimethyl‐4,4′‐bis(4‐minophenoxy)biphenyl (DBAPB) with trimellitic anhydride in glacial acetic acid. A series of new polyamide‐imides were prepared by direct polycondensation of DBAPB and various aromatic diamines in N‐methyl‐2‐pyrrolidinone (NMP), using triphenyl phosphite and pyridine as condensing agents. The polymers were produced with high yield and moderate to high inherent viscosities of 0.86–1.33 dL · g⁻¹. Wide‐angle X‐ray diffractograms revealed that the polymers were amorphous. Most of the polymers exhibited good solubility and could be readily dissolved in various solvents such as NMP, N,N‐dimethylacetamide (DMAc), N,N‐dimethylformamide (DMF), dimethyl sulfoxide, pyridine, cyclohexanone, and tetrahydrofuran. These polyamide‐imides had glass‐transition temperatures between 224–302 °C and 10% weight loss temperatures in the range of 501–563 °C in nitrogen atmosphere. The tough polymer films, obtained by casting from DMAc solution, had a tensile strength range of 93–115 MPa and a tensile modulus range of 2.0–2.3 GPa. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 63–70, 2001     

Effect of Heavy‐Atom (Br) at the Phenyl Rings of Schiff‐Base Ligands on the NIR Luminescence of their Bimetallic Zn‐Nd Complexes

Two heterobimetallic Zn‐Nd phenylene‐bridged Schiff‐base ligands complexes [ZnNd L¹ (Py)(NO₃)₃] ( 1 ) and [Zn L² Nd(Py)(NO₃)₃]·MeCN ( 2 ) (Py = pyridine, H₂L¹ = N,N′‐bis‐ (3‐methoxy‐salicylidene)phenylene‐1,2‐diamine, H₂L² = N,N′‐bis‐5‐bromo‐3‐methoxy‐salicylidene)phenylene‐1,2‐diamine) were obtained. Both 1 and 2 were structurally characterized by X‐ray crystallography, and their near‐infrared (NIR) luminescent properties were determined. For the two complexes, the occupation of pyridine at the axial position of 3d Zn²⁺ ions could effectively prevent luminescent quenching arising from OH‐, NH‐ or CH oscillators of the solvates around the 4f Nd³⁺ ions, and the heavy‐atom (Br) effect of the Schiff‐base ligands on their NIR luminescent properties is also discussed.