2,2‐Dichloro‐1,3‐bis(trimethylsilyl)‐1,3‐diaza‐2‐silacyclopentane

In the title compound, C₈H₂₂Cl₂N₂Si₃, the central Si atom is tetrahedrally coordinated by two Cl and two N atoms in a molecule that has crystallographically imposed C₂ symmetry. Comparison is made with the isomorphous structure having titanium instead of silicon at the central position in the diazacyclopentane ring [Tinkler, Deeth, Duncalf & McCamley (1996). Chem. Commun. pp. 2623–2624].     

Asymmetric 1,3‐Dipolar Cycloadditions of 2‐Diazocyclohexane‐1,3‐diones and Alkyl Diazopyruvates

The 1,3‐dipolar cycloaddition reactions of 2‐diazocyclohexane‐1,3‐dione ( 7a ; Table 1) and of alkyl diazopyruvates ( 11a – e ; Table 3) to 2,3‐dihydrofuran and other enol ethers have been investigated in the presence of chiral transition metal catalysts. With Rh^II catalysts, the cycloadditions were not enantioselective, but those catalyzed by [Ru^IICl₂( 1a )] and [Ru^IICl₂( 1b )] proceeded with enantioselectivities of up to 58% and 74% ee, respectively, when diazopyruvates 11 were used as substrates. The phenyliodonium ylide 7c yielded the adduct 8a in lower yield and poorer selectivity than the corresponding diazo precursor 7a (Table 2) upon decomposition with [Ru(pybox)] catalysts. This suggests that ylide decomposition by Ru^II catalysts, contrary to that of the corresponding diazo precursors, does not lead to Ru‐carbene complexes as reactive intermediates. Our method represents the first reproducible, enantioselective 1,3‐cycloaddition of these types of substrates.     

The behavior of 2‐substituted‐1,3‐diphenylpropane‐1,3‐tione toward organophosphorus reagents

The reaction of 2‐benzylidene‐1,3‐diphenylpropanetrione ( 1a ) with phosphorus ylides 2a–c afforded the new phosphonium ylides 4a–c . Trialkyl phosphites 3a–c react with 1a to give the respective dialkyl phosphonate products 5a–c . On the other hand, the olefinic compounds 6 and 7 were isolated from the reaction of 1b with Wittig reagents 2 . Moreover, trialkyl phosphites reacted with 1b to give products 8a–c . Possible reaction mechanisms are considered, and the structural assignments are based on analytical and spectroscopic evidence. © 2000 John Wiley & Sons, Inc. Heteroatom Chem 11:57–64, 2000     

Cycloaddition of bis‐1,3‐dipolar reagents to 1,3‐diarylprop‐2‐en‐1‐ones

Bis pyrazolines and isoxazolines were prepared by 1,3‐dipolar cycloaddition of benzene‐1,3/1,4‐dicarboxaldehyde dihydrazones and dioximes to 1,3‐diaryl‐prop‐2‐en‐1‐ones. © 2003 Wiley Periodicals, Inc. Heteroatom Chem 14:379–383, 2003; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/hc.10169     

1,3‐dipolar cycloaddition reactions of nitrile oxides to prop‐1‐ene‐1,3‐sultone

The reaction of prop‐1‐ene‐1,3‐sultone 1 with a variety of nitrile oxides 3 afforded novel [3+2] cycloaddition products 4 in good yield. The cycloaddition reaction achieved excellent regioselectivity.     

Synthesis of alicyclic N‐substituted 1,3‐amino alcohols via 1,3‐oxazines

Alicyclic N‐substituted 1,3‐amino alcohols 13‐18 were prepared in a facile way in a one‐pot procedure from 1,3‐oxazines 5‐8 in the presence of a ketone 9‐12 . The complex reaction involves palladium‐catalyzed reduction, debenzylation and/or transimination and further reduction.     

On the Enantioselectivity of Transition Metal‐Catalyzed 1,3‐Cycloadditions of 2‐Diazocyclohexane‐1,3‐diones

The formal 1,3‐cycloaddition of 2‐diazocyclohexane‐1,3‐diones 1a –1 d to acyclic and cyclic enol ethers in the presence of Rh^II‐catalysts to afford dihydrofurans has been investigated. Reaction with a cis/trans mixture of 1‐ethoxyprop‐1‐ene ( 13a ) yielded the dihydrofuran 14a with a cis/trans ratio of 85 : 15, while that with (Z)‐1‐ethoxy‐3,3,3‐trifluoroprop‐1‐ene ( 13b ) gave the cis‐product 14b exclusively. The stereochemical outcome of the reaction is consistent with a concerted rather than stepwise mechanism for cycloaddition. The asymmetric cycloaddition of 2‐diazocyclohexane‐1,3‐dione ( 1a ) or 2‐diazodimedone (=2‐diazo‐5,5‐dimethylcyclohexane‐1,3‐dione; 1b ) to furan and dihydrofuran was investigated with a representative selection of chiral, nonracemic Rh^II catalysts, but no significant enantioselectivity was observed, and the reported enantioselective cycloadditions of these diazo compounds could not be reproduced. The absence of enantioselectivity in the cycloadditions of 2‐diazocyclohexane‐1,3‐diones is tentatively explained in terms of the Hammond postulate. The transition state for the cycloaddition occurs early on the reaction coordinate owing to the high reactivity of the intermediate metallocarbene. An early transition state is associated with low selectivity. In contrast, the transition state for transfer of stabilized metallocarbenes occurs later, and the reactions exhibit higher selectivity.     

Adsorption of 1,3‐Benzenedithiol and 1,3‐Benzenedimethanethiol on Gold Surfaces

The adsorption characteristics of 1,3‐benzenedithiol (1,3‐BDT) and 1,3‐benzenedimethanethiol (1,3‐BDMT) on Au surfaces are investigated by means of surface‐enhanced Raman scattering, UV/Vis absorption spectroscopy, and cyclic voltammetry (CV). 1,3‐BDMT is found to adsorb via two S–Au linkages at concentrations below monolayer coverage, but to have an upright geometry as the concentration increases on Au nanoparticles. On the other hand, 1,3‐BDT is found to adsorb by forming two S–Au linkages, regardless of concentration, based on the disappearance of the ν(SH)_free stretching band. Because of the absence of the methylene unit, 1,3‐BDT appeares not to self‐assemble efficiently on Au surfaces. The UV/Vis absorption spectroscopy and CV techniques are also applied to check the formation of self‐assembled monolayers of 1,3‐BDT and 1,3‐BDMT on Au. Density functional theory calculations based on a simple adsorption model using an Au₈ cluster are performed to better understand the nature of the adsorption characteristics of 1,3‐BDT and 1,3‐BDMT on Au surfaces.     

Reversible 1,3‐dipolar cycloaddition of dimethyl 2‐thiono‐1,3‐dithiole‐4,5‐dicarboxylate with dimethyl acetylenedicarboxylate

It was shown that dimethyl 2‐thiono‐1,3‐dithiole‐4,5‐dicarboxylate ( 2 ) and dimethyl acetylenedicarboxylate (DMAD) undergo a 1,3‐dipolar cycloaddition to produce a short‐lived ylide intermediate ( 3 ). The 1,3‐dipolar cycloaddition took place even at room temperature, although sluggishly, but took place much more rapidly under application of a high pressure of 500 MPa. The 1,3‐dipolar cycloaddition is reversible and the ylide 3 immediately splits into 2 and DMAD. When the reaction of 2 with DMAD was carried out at room temperature without solvent, a spiro‐1,3‐dithiole ( 11 ) was formed in 11% yield, whereas the reaction at 150°C provided a thiophene derivative ( 13 ) in 41% yield. It was found that 11 undergoes a thermal rearrangement to 13 . Results of attempted chemical trapping of the ylide 3 are also reported. © 2000 John Wiley & Sons, Inc. Heteroatom Chem 11:434–440, 2000     

Eine cyclische Methylendiphosphinsäure: 1,3‐Dihydroxy‐1,3‐dioxo‐1,2,3,4‐tetrahydro‐1λ5,3λ5‐[1,3]diphosphinin

A Cyclic Methylenediphosphinic Acid: 1,3‐Dihydroxy‐1,3‐dioxo‐1,2,3,4‐tetrahydro‐1λ⁵,3λ⁵‐[1,3]diphosphinine Strong acids protonate 1,3‐bis(dimethylamino)‐1λ⁵,3λ⁵‐[1,3]diphosphinine ( 5 ) to give the corresponding cation. The protonation is followed by hydrolytic cleavage of the dimethylamino groups resulting in the formation of the cyclic methylenediphosphinic acid ( 6 ).     

Synthesis and antimicrobial activity of new benzofuranyl‐1,3‐benzoxazines and 1,3‐benzoxazin‐2‐ones

New benzofuranyl‐1,3‐benzoxazines and 1,3‐benzoxazin‐2‐ones are synthesized in which benzofuran is coupled with 1,3‐benzoxazines and 1,3‐benzoxazin‐2‐ones through ‐CONH‐ and ‐COCH₂‐ bridges, respectively. The antimicrobial activity of these compounds is reported.     

Acyclic Schiff base salts derived from 1,3‐diaminopropane and 1,3‐diamino‐2‐hydroxypropane

Two salts of acyclic Schiff base cationic ligands, namely N,N′‐bis(2‐nitrobenzyl)propane‐1,3‐diammonium dichloride monohydrate, C₁₇H₂₂N₄O₄²⁺·2Cl⁻·H₂O, (I), and 2‐hydroxy‐N,N′‐bis(2‐nitrobenzyl)propane‐1,3‐diammonium dichloride, C₁₇H₂₂N₄O₅²⁺·2Cl⁻, (II), were synthesized as precursors in order to obtain new acyclic and macrocyclic multidentate ligands and complexes. The cation conformations in compounds (I) and (II) are different in the solid state, although the cations are closely related chemically. Similarly, the hydrogen‐bonding networks involving ammonium cations, hydroxyl groups and chloride anions are also different. In the cation of compound (II), the hydroxyl group is disordered over two sets of sites, with occupancies of 0.785 (8) and 0.215 (8).     

New Transformation of 1,3‐Oxathiolane‐2‐thione into 1,3‐Dithiolan‐2‐one via Polymerization and Depolymerization

This article deals with the cationic and anionic depolymerization of polydithiocarbonate, which was synthesized by cationic polymerization of 5‐phenoxymethyl‐1,3‐oxathiolane‐2‐thione ( 1 ) using methyl triflate as the initiator. The cationic depolymerization of the obtained polymer was carried out in the presence of 5–20 mol‐% of methyl triflate or triflic acid catalyst in chlorobenzene at 60 °C for 96 h to afford 4‐phenoxymethyl‐1,3‐dithiolan‐2‐one ( 2 ) in 35–83% yield. The anionic depolymerization of the polymer was carried out in the presence of 5 mol‐% of triethylamine or potassium tert‐butoxide at 20 °C for 24 h to afford 2 in 85–100% yield.     

Synthesis,Characterization, and Crystal Structure of 1,3‐Dipentafluorophenyl‐2,2,2,4,4,4‐hexazido‐1,3‐diaza‐2,4‐diphosphetidine

1,3‐Dipentafluorophenyl‐2,2,2,4,4,4‐hexazido‐1,3‐diaza‐2,4‐diphosphetidine ( 1 ) was synthesized by the reaction of [(C₆F₅)NPCl₃]₂ with trimethylsilyl azide in CH₂Cl₂ and characterized by multinuclear NMR and vibrational spectroscopy. The molecular structure of the compound was determined by single‐crystal X‐ray structure analysis. [(C₆F₅)NP(N₃)₃]₂ crystallizes in the monoclinic space group P2₁/n with a = 9.6414(2), b = 7.4170(1) and c = 15.9447(4) Å, β = 94.4374(9)°, with 2 formula units per unit cell. The bond situation in [(C₆F₅)NP(N₃)₃]₂ has been studied on the basis of NBO analysis. The antisymmetric stretching vibration of the azide groups is discussed. The structural diversity of 1 and 1,3‐diphenyl‐2,2,2,4,4,4‐hexazido‐1,3‐diaza‐2,4‐diphosphetidine in solution and in the solid state depending on the aryl substituent at the nitrogen atom is discussed.     

Efficient Synthesis of 1,3‐Dithiol‐2‐one Derivatives via 4,5‐Bis(dibromomethyl)‐1,3‐dithiol‐2‐one

A series of 1,3‐dithiol‐2‐one derivatives via [4 + 2] Diels–Alder cycloaddition reaction of 4,5‐bis(dibromomethyl)‐1,3‐dithiol‐2‐one with vinyl‐substituted compounds have been synthesized. Structures of all the newly synthesized compounds are well supported by spectral data such as ¹H‐NMR, MS, and elemental analysis. The structures of IVf and IVg have been analyzed by X‐ray crystallography.     

Preparation of 1,3‐diphosphabuta‐1,3‐dienes from sterically encumbered phosphaalkyne and phosphaethenyllithium

Kinetically stabilized 2‐lithio‐1‐(2,4,6‐tri‐t‐butylphenyl)‐1‐phosphapropene was allowed to react with a bulky phosphaalkyne Mes*CP (Mes* = 2,4,6‐t‐Bu₃C₆H₂) followed by quenching with iodomethane or benzyl bromide to give the corresponding 1,3‐diphosphabuta‐1,3‐dienes. The presence of the bulky Mes* group on the 1‐phosphorus atom prevents intramolecular [2+2] cyclization and gave the PC PC skeleton, whereas Mes*CP reacted with half an equivalent of nucleophile to afford the PCPC four‐membered ring compounds. X‐ray crystallography of 4‐benzyl‐1,3‐diphosphabuta‐1,3‐diene confirmed the molecular structure showing conjugation on the 1,3‐diphosphabuta‐1,3‐diene moiety. © 2005 Wiley Periodicals, Inc. Heteroatom Chem 16:357–360, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20104     

1,3‐Dimethyl­isoguanine

The structure of 1,3‐dimethyl­isoguanine [or 6‐amino‐1,3‐dimethyl‐1H‐purin‐2(3H)‐one], C₇H₉N₅O, has been redetermined and the correct assignment of H atoms on the heterocycle is now reported. Inter­molecular hydrogen‐bonding inter­actions confirm that this form is the correct mol­ecular structure; this form is also in agreement with an earlier reported structure of the trihydrate form.