Thermotropic liquid crystalline polymer. III. Synthesis and properties of poly(amide-azomethine-ester)

A series of novel dialdehydes as new monomers, 4,4′-diformyl-α,ω-diphencarbonylalkane, 4,4′-diformyl-3,3′-methoxy-α,ω-diphencarbonylalkane, and 4,4′-diformyl-3,3′-ethoxy-α,ω-diphencarbonylalkane, was prepared from aliphatic diacid chloride with p-hydroxybenzaldehyde, vanillin, and 3-ethoxy-4-hydroxybenzaldehyde, respectively. A series of poly(amide-azomethine-ester)s was prepared by condensation of 4,4′-diaminoanilide with 4,4′-diformyl-α,ω-α,ω-diphencarbonylalkane, 4,4′-diformyl-3,3′-methoxy-α,ω-diphencarbonylalkane, and 4,4′-diformyl-3,3′-ethoxy-α,ω-diphencarbonylalkane, respectively. Their thermotropic liquid crystalline properties were examined by DSC microscope observations. In most cases, the mesophase extends up to ca. 288–380°C, where thermal decomposition prevents further observation.     

LIQUID CRYSTALLINE POLYMERS. 3. SYNTHESIS AND LIQUID CRYSTAL PROPERTIES OF THERMOTROPIC POLY(ARYLIDENE-ETHER)S AND COPOLYMERS CONTAINING CYCLOALKANONE MOIETY IN THE POLYMER BACKBONE

Two novel series of poly(arylidene-ether)s and copoly(aryl-idene-ether)s were synthesized by polycondensation of 4,4^′-diformyl-α,ω-diphenoxyalkane and 4,4′-diformyl-2,2′-dimeth-oxy-α,ω-diphenoxyalkane with cyclohexanone and/or cyclo-pentanone. The inherent viscosity of the polymers and copolymers thus prepared were in the range of 0.42–1.27 dL/g. The phase behavior of these polymers was studied by differential scanning calorimetry (DSC), optical polarizing microscopy using a heated stage, and thermogravimetric analyses. Almost all the polymers and copolymers exhibited thermotropic liquid crystalline properties. In most cases, the mesophase extends up to 310°C, where thermal decomposition prevents further observation. Methoxy substituents, on the benzene ring of these polymers, lower the transition temperature significantly. The morphology of polymer IX_f was examined by scanning electronic microscope.     

LIQUID CRYSTALLINE POLYMERS. IV. THERMOTROPIC LIQUID CRYSTALLINE POLY(ARYLIDENE-ETHER)S AND COPOLYMERS CONTAINING N-METHYLPIPERIDONE LINKED TO THE MAIN CHAIN THROUGH SPACERS OF VARIOUS LENGTHS

Two novel series of poly(arylidene-ether)s and copoly(arylidene-ether)s were synthesized from N-methylpiperidone and/or cyclohexanone respectively. The first series (homopolymers) was derived from 4,4′-diformyl-α,ω-diphenoxyalkane or 4,4′-diformyl-2,2′ dimethoxy-α,ω-diphenoxyalkane with N-methylpiperidone. The second series (copolymers) was derived from the diphenoxyalkanes (I–VIII) with N-methylpiperidone and cyclohexanone. The inherent viscosities of the polymers thus prepared were in the range of 0.37–0.98 dI/g. The majority of the polymers and copolymers are soluble in chlorinated hydrocarbons. DSC measurements and microscope observation under polarized light demonstrate that this type of poly(arylidene-ether)s form nematic mesophase over a wide temperature range in contrast to the corresponding copoly(arylidene-ether)s. All of the polymers and copolymers exhibited thermotropic liquid crystalline properties. In most cases, the mesophase extends up to 315°C, where thermal decomposition prevents further observation. The morphology of polymer IXb and copolymer XIb as a selected example was examined by scanning electronic microscope.     

Liquid crystalline polymers XII. Main chain thermotropic poly(arylidene-ether)s containing 4-tertiary-butyl-cyclohexanone moiety linked with polymethylene spacers

A new homologous series of thermally stable thermotropic liquid crystalline poly(arylidene-ether)s based on 4-tertiary-butyl-cyclohexanone moiety was synthesised by solution polycondensation of 4,4′-diformyl-α,ω-diphenoxyalkanes, I_a–f, or 4,4′-diformyl-2,2′-dimethoxy-α,ω-diphenoxyalkanes, II_a–f, with the 4-tertiary-butyl-cyclohexanone monomer. A model compound III was synthesised from the monomer with benzaldehyde and characterised by elemental and spectral analyses. The inherent viscosities of the resulting polymers were in the range of 0.18–0.92 dL/g. The mesomorphic properties of these polymers were studied as a function of the diphenoxyalkane space length. Their thermotropic liquid crystalline properties were examined by differential scanning calorimetry (DSC) and optical polarising microscopy and demonstrated that the resulting polymers form nematic mesophases over wide temperature ranges. The thermal properties of those polymers were evaluated by thermogravimetric analysis and DSC measurements and correlated to their structural units. X-ray analysis showed that polymers having some degree of crystallinity in the region 2θ = 5–60°. In addition, the morphological properties of selected examples were tested by scanning electron microscopy.     

Synthesis and characterization of main chain liquid crystalline ionomers containing sulphonate groups

A series of main chain liquid crystalline ionomers containing sulphonate groups pendent to the polymer backbone were synthesized by an interfacial condensation reaction of 4,4′‐bis(1,10‐sebacyloxo)benzoic acid, brilliant yellow (BY), and 4,4′‐biphenyldiol. 4,4′‐Bis(1,10‐sebacyloxo)benzoic acid exhibited nematic schlieren texture during heating and cooling. The ionomers are thermotropic liquid crystalline polymers and thermally stable to about 270°C. They exhibit broad mesophase regions over a range of 220°C and the same nematic mesomogen with a colourful thread texture as B₀‐LCP, which implies that the introduction of an ionic group did not change the texture of the B₀‐LCP. However, the thermotropic liquid crystalline properties were somewhat weakened when the concentration of BY was more than 5%. The inherent viscosity in N,N‐dimethylformamide solution suggested that intermolecular associations of sulphonate groups occurred at low concentration, and intermolecular associations predominated at higher concentration.     

Liquid crystalline polymers XV. Synthesis,properties and cytotoxicity of photoresponsive thermotropic liquid crystalline copoly(arylidene-ether)s based on 4-tert-butylcyclohexanone and cyclohexanone moieties in the main chain

A new series of photoresponsive thermotropic liquid crystalline copoly(arylidene-ether)s based on both 4-tert-butylcyclohexanone and cyclohexanone moieties in the main chain were synthesised using solution polycondensation technique of both with different 4,4?-diformyl-α,ω-diphenoxyalkane derivatives. Two model compounds were synthesised from the reaction of each cycloalkanone monomer with benzaldehyde, and their structures were determined using single crystal X-ray diffraction. The structure of the monomers and copolymers was confirmed by elemental and spectral analyses. In addition, the thermal stabilities of these copolymers were evaluated by thermogravimetric analysis. We performed both differential scanning calorimertric and polarised optical microscopic measurements to investigate the thermotropic liquid crystalline properties of synthesised copolymers. The UV?Vis absorption spectroscopy of the liquid crystalline copoly(arylidene-ether) 6f revealed that the system undergoes Entgegen/Zusammen (E/Z) photoisomerisation using UV lamp (450 nm). Moreover, the various characteristics of the prepared copolymers including: solubility, X-ray diffraction analysis, gel permeation chromatography (GPC) and scanning electron microscopy were determined and discussed. The cytotoxicity of the model compounds and selected examples of these copolymers was tested against MCF-7 breast cancer cells. All tested samples showed considerable results, where 6c copolymer gave the best result; it showed cytotoxicity against MCF-7 cell line with IC₅₀ of 0.26 µM.     

Studies on the thermotropic liquid crystalline polymer. VI. Synthesis and properties of homo- and co-poly(amide-azomethine-ether)

Two series of poly(amide-azomethine-ether)s and poly(ester-azomethine-ether)s were prepared by the condensation of dialdehydes with N,N'-bis(aminobenzamide)s and 4,4′-bis(p-aminophenyl)terephthalester, respectively. The thermotropic liquid crystalline properties were examined by DSC microscopic observations. Almost half of the synthesized polymers exhibit thermotropic liquid crystalline properties which are in the nematic phase since threaded and/or Schlieren textures are observed under polarizing microscope. The effects of the number of amide group and the nature of the nonlinear bibenzamide moiety, which link in the rigid segment, on the thermotropic liquid crystalline properties of the homo- and co-poly(amide-azomethine-ether)s were also investigated.     

Synthesis and characterization of thermotropic liquid crystalline polyurethanes from 4,4′‐bis(6‐hydroxyhexoxy) biphenyl and aliphatic diols

A series of thermotropic liquid crystalline polyurethanes (LCPUs) were synthesized by the polyaddition reactions of 2,4‐toluene diisocyanate (2,4‐TDI) with 4,4′‐bis(6‐hydroxyhexoxy)biphenyl (BHHBP) and aliphatic diol. The intrinsic viscosities of the polymers were measured by Ubbelohde viscometer, and the chemical structure was confirmed by Fourier transform infrared spectroscopy (FT‐IR). The LCPUs were examined by differential scanning calorimetry (DSC), polarized optical microscopy (POM), wide angle X‐ray diffraction (WAXD), and thermogravimetric analysis (TGA). The intrinsic viscosities were 0.56–0.83 dl/g. According to the melting point (T_m) and the isotropic temperature (T_i) of the LCPUs, the temperature range of the liquid crystalline phase became wider with increased number of methylene spacers in the polyurethane. The LCPUs exhibited a nematic phase with a threaded texture and had a wide mesophase temperature range. The decomposition temperature of the LCPUs was >300°C. On WAXD, the LCPUs give a dispersing peak at 2θ ≈ 20°, and a strong diffraction peak at 2θ ≈ 25°. Copyright © 2008 John Wiley & Sons, Ltd.     

Liquid crystalline lonomers. I. Main-chain liquid crystalline polymer containing pendant sulfonate groups

Liquid crystalline polymers containing sodium sulfonate groups pendant to the polymer backbone were synthesized by an interfacial condensation reaction of brilliant yellow, a sulfonate-containing monomer, with 4,4′-dihydroxy-α,α′-dimethyl benzalazine and a 50/50 mixture of sebacoyl and dodecanedioyl dichlorides. Polymers containing up to ca. 4 mol% brilliant yellow were characterized by elemental analysis and ultraviolet spectroscopy. The polymers were thermally stable to about 300°C, and they exhibited a broad nematic mesophase region of 70–100°C. The solution viscosity behavior in chloroform suggested that intramolecular associations of the sulfonate groups occurred at low polymer concentrations and intermolecular associations predominated at higher concentrations.     

Thermotropic liquid‐crystalline polyesters of 4,4′‐biphenol and phenyl‐substituted 4,4′‐biphenols with 4,4′‐oxybisbenzoic acid

A series of thermotropic polyesters, derived from 4,4′‐biphenol (BP), 3‐phenyl‐4,4′‐biphenol (MPBP), and 3,3′‐bis(phenyl)‐4,4′‐biphenol (DPBP), 4,4′‐oxybisbenzoic acid (4,4′‐OBBA), and other aromatic dicarboxylic acids as comonomers, were prepared by melt polycondensation and were characterized for their thermotropic liquid‐crystalline (LC) properties with a variety of experimental techniques. The homopolymer of BP with 4,4′‐OBBA and its copolymers with either 50 mol % terephthalic acid or 2,6‐naphthalenedicarboxylic acid had relatively high values of the crystal‐to‐nematic transition (448–460 °C), above which each of them formed a nematic LC phase. In contrast, the homopolymers of MPBP and DPBP had low fusion temperatures and low isotropization temperatures and formed nematic melts above the fusion temperatures. Each of these two polymers also exhibited two glass‐transition temperatures, which were associated with vitrified noncrystalline (amorphous) regions and vitrified LC domains, as obtained directly from melt polycondensation. As expected, they had higher glass‐transition temperatures (176–211 °C) than other LC polyesters and had excellent thermal stability (516–567 °C). The fluorescence properties of the homopolymer of DPBP with 4,4′‐OBBA, which was soluble in common organic solvents such as chloroform and tetrahydrofuran, were also included in this study. For example, it had an absorption spectrum (λ_max = 259 and 292 nm), an excitation spectrum (λ_ex = 258 and 292 nm with monitoring at 350 nm), and an emission spectrum (λ_em = 378 nm with excitation at 330 nm) in chloroform. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 141–155, 2002     

Thermally stable polymers based on acetylene-terminated adamantanes

1,3-Diethynyl-5,7-dimethyladamantane, 1,3-diethynyl-5-phenyladamantane, 1,3,5-triethynyladamantane, and 3,3′-diethynyl-1,1′-biadamantane, were synthesized and polymerized thermally at 210°C. The thermoset resins obtained were post-cured at 300°C for 16 h to give materials that exhibited onsets of degradation (TGA) in air at 460–477°C and in helium at 460–485°C. The fully cured materials did not exhibit any detectable DSC transitions between 25 and 400°C. An attempt to thermally polymerize 1-ethynyl-3-phenyladamantane was unsuccessful. © 1992 John Wiley & Sons, Inc.     

Thermotropic liquid–crystalline properties of 4,4′-dialkoxy-3,3′-diaminobiphenyl compounds and their precursors

A series of 4,4?-dialkoxy-3,3?-diaminobiphenyl compounds were synthesised by three-step procedure that involves alkylation, nitration and reduction reactions. Their chemical structures were characterised by FTIR, ¹H and ¹³C spectroscopy and elemental analysis. Their thermotropic liquid–crystalline (LC) properties were examined by a number of experimental techniques including differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), polarising optical microscopy (POM) and variable temperature X-ray diffraction (VT-XRD). The 4,4?-dialkoxy-3,3?-dinitrobipheyl compounds, precursors to the diamine compounds, were also examined for their thermotropic LC properties. POM studies of focal conic textures and VT-XRD of the 3,3?-diaminobiphenyl derivatives having flexible alkyl chains (C₆–C₁₂) exhibited the smectic A (SmA) phase independent of the length of alkyl chains. Similarly, the 3,3?-dinitrobiphenyl derivatives containing alkyl chains C₇, and C₉–C₁₁ exhibit the SmA phase, those containing C₈ formed the smectic C (SmC) phase and C₁₂ formed both the SmA and smectic B (SmB) phases, respectively. The 3,3?-diaminobiphenyl derivatives had excellent thermal stability in the temperature range of 237–329°C, while those of 3,3?-dinitrobiphenyl derivatives were in the temperature range of 270–321°C. The 3,3?-diaminobiphenyl derivatives emitted UV light both in chloroform and acetonitrile.     

Synthesis,liquid crystallinity,and mechanical properties of thermotropic polyquinolines

Thermotropic liquid-crystalline polyquinolines with high molecular weights, i.e., poly[2,2′-(α,ω-dioxyphenylene (or -dioxybiphenylene) alkane)-6,6′-(4,4′-dioxybiphenyl)-bis(4-phenylquinoline)]s (P-H-B1Mns or P-H-B2Mns), were synthesized by polycondensation of 4,4′-bis(4-amino-3-benzoylphenoxy)biphenyl and α,ω-bis(4-acetophenoxy (or -acetobiphenoxy))alkanes. For P-H-B1Mn series, the T_m and T_i were in the range of 129–230°C and 156–254°C, respectively, while for the P-H-B2Mn series, those were 182–275°C and 217–309°C, respectively. The introduction of both the dioxybiphenylene group and an alkylene spacer induced thermotropic liquid crystallinity in the polyquinoline, although the introduction of the alkylene spacer alone did not induce it. In addition, polyquinolines substituted with methyl, methoxy, and chloro groups exhibited larger mesophase temperature ranges as well as higher T_ms and T_is than the unsubstituted ones. Tensile strengths of these thermotropic polyquinolines were considerably high in the range of 770 to 1170 kgf/cm². © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 749–759, 1998     

Studies on the thermotropic liquid crystalline polymer. VII. Synthesis and properties of photocrosslinkable poly(ether-ester) containing cinnamic group

A series of semi-aromatic poly(ether-ester)s containing cinnamic group was prepared from 4,4′-diacrylic acid-α,ω-phenoxyalkanes with diols in the presence of diphenylchlorophosphate (DPCP) and pyridine as a catalyst and solvent. The phase behavior of these polymers was studied by differential scanning calorimetry (DSC), optical polarizing microscopy equipped with a heating stage, and wide-angle x-ray diffraction (WAXD). All of the poly(ether-ester)s, except P3 , show nematic or smectic thermotropic liquid crystalline behaviour under optical polarizing microscopic observation. These polymers can undergo photocrosslinking reaction upon heating, as examined by IR, solubility, and DSC analysis. © 1993 John Wiley & Sons, Inc.     

Synthesis and characterization of main chain liquid crystalline ionomers containing sulphonate groups

A series of main chain liquid crystalline ionomers containing sulphonate groups pendent to the polymer backbone were synthesized by an interfacial condensation reaction of 4,4'-bis(1,10-sebacyloxo)benzoic acid, brilliant yellow (BY), and 4,4'-biphenyldiol. 4,4'-Bis(1,10-sebacyloxo)benzoic acid exhibited nematic schlieren texture during heating and cooling. The ionomers are thermotropic liquid crystalline polymers and thermally stable to about 270°C. They exhibit broad mesophase regions over a range of 220°C and the same nematic mesomogen with a colourful thread texture as B₀-LCP, which implies that the introduction of an ionic group did not change the texture of the B₀-LCP. However, the thermotropic liquid crystalline properties were somewhat weakened when the concentration of BY was more than 5%. The inherent viscosity in N,N-dimethylformamide solution suggested that intermolecular associations of sulphonate groups occurred at low concentration, and intermolecular associations predominated at higher concentration.     

Melt-polymerizable bisimido-bisphthalonitriles containing silicon,fluoro, and ether groups: Synthesis,characterization, and NMR study

Various melt-polymerizable bisimido-bisphthalonitrile polymer precursors were synthesized by the reaction of 4-aminophthalonitrile (4-APN) with bis(3,4-dicarboxyphenyl) dimethylsilane dianhydride (SIDA), 4,4′-hexafluoroisopropylidene diphthalic anhydride (6FDA), bis(3,4-dicarboxyphenyl)ether dianhydride (ODPA), and 3,3′, 4,4′-tetracarboxylichenzophen+ne dianhydride (BTDA) in an aprotic solvent. The synthesized monomers showed crystalline melting at 269 and 271°C. Elemental analysis, differential thermal analysis (DTA), infrared (IR), nuclear magnetic resonance (¹H-NMR) and mass spectral studies were carried out to characterize the synthesized monomers. Thermogravimetric analysis (TGA) of the synthesized monomers showed their thermal stability at 410–400°C. A detailed study and NMR investigation of the first step of condensation reaction was carried out and indicated the formation of a transient charge transfer complex. Thermal cyclization of the formed intermediate, however, gave the required monomers. A preliminary study demonstrated that melt-polymerization of the synthesized monomers gave thermallystable, tough polymers.     

Main‐chain,thermotropic, liquid‐crystalline,hydrogen‐bonded polymers of 4,4′‐bipyridyl with aliphatic dicarboxylic acids

A series of main‐chain, thermotropic, liquid‐crystalline (LC), hydrogen‐bonded polymers or self‐assembled structures based on 4,4′‐bipyridyl as a hydrogen‐bond acceptor and aliphatic dicarboxylic acids, such as adipic and sebacic acids, as hydrogen‐bond donors were prepared by a slow evaporation technique from a pyridine solution and were characterized for their thermotropic, LC properties with a number of experimental techniques. The homopolymer of 4,4′‐bipyridyl with adipic acid exhibited high‐order and low‐order smectic phases, and that with sebacic acid exhibited only a high‐order smectic phase. Like the homopolymer with adipic acid, the two copolymers of 4,4′‐bipyridyl with adipic and sebacic acids (75/25 and 25/75) also exhibited two types of smectic phases. In contrast, the copolymer of 4,4′‐bipyridyl with adipic and sebacic acids (50/50), like the homopolymer with sebacic acid, exhibited only one high‐order smectic phase. Each of them, including the copolymers, had a broad temperature range of LC phases (36–51 °C). The effect of copolymerization for these hydrogen‐bonded polymers on the thermotropic properties was examined. Generally, copolymerization increased the temperature range of LC phases for these polymers, as expected, with a larger decrease in the crystal‐to‐LC transition than in the LC‐to‐isotropic transition. Additionally, it neither suppressed the formation of smectic phases nor promoted the formation of a nematic phase in these hydrogen‐bonded polymers, as usually observed in many thermotropic LC polymers. The thermal transitions for all of them, measured by differential scanning calorimetry, were well below their decomposition temperatures, as measured by thermogravimetric analysis, which were in the temperature range of 193–210 °C. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1282–1295, 2003     

Synthesis and mesomorphic behaviour of novel chiral nematic side chain liquid crystalline polysiloxanes

A series of novel thermotropic side chain liquid crystalline polymers was synthesized by grafting copolymerization of a mesogenic monomer, 4-allyloxybenzoyl-4′?-(4-n-alkylbenzoyl)–p-benzenediol bisate and a chiral monomer, menthyl undecylenate. The mesogenic monomers exhibited nematic threadlike textures during heating and cooling. The polymers showed thermotropic liquid crystalline properties with a broad mesomorphic region over a range of 100°C. The polymers exhibited a cholesteric mesophase with a colourful Grand-Jean texture when the content of chiral units was greater than 15?mol?%; the others exhibited nematic threadlike textures. All of the polymers were thermally stable over 300°C, and most were laevorotatory as the chiral monomer.     

New polyphenylquinoxalines linked by m-terphenyl flexibilizing groups

Three new monomers with phenylglyoxyloyl groups fixed on the 4,4′-, 4,6′-, and 4,4″-positions of m-terphenyl were synthesized by different pathways. They were used to prepare a series of polyphenylquinoxalines by solution polycondensation with 3,3′-diaminobenzidine and 3,3′,4,4′-tetraaminodiphenyl ether. These polymers exhibited excellent oxidative and thermal stability as shown by thermogravimetric analysis and isothermal aging in circulating air between 300 and 450°C. Clear yellow films, cast from m-cresol solution, were used to measure their softening temperature by thermomechanical analysis (TMA). Numerical data thus obtained, indicated a thermoplastic behavior in the temperature range 300 ± 15°C. Crosslinking of the linear polymers by isothermal heat exposure under argon between 300 and 500°C was investigated by means of TMA. Molded materials were fabricated under constant pressure (996 psi) at 500–525°C with an Instron testing machine. These polymers were also used for preliminary evaluation as matrices for 181-E glass reinforced composites. Flexural values obtained after isothermal aging in air up to 400°C indicated a potential use varying from 150 hr at 350°C to 24 hr at 400°C.     

Fully aromatic thermotropic liquid crystalline polyesters of 3-phenyl-4,4′-biphenol with 4,4′-benzophenone dicarboxylic acid

A series of fully aromatic, thermotropic polyesters, derived from 3-phenyl-4,4′-biphenol (MPBP), nonlinear 4,4′-benzophenone dicarboxylic acid (4,4′-BDA), and various other comonomers was prepared by the melt polycondensation method and characterized for their thermotropic liquid crystalline behavior by a variety of experimental techniques. The homopolymer of MPBP with 4,4′-BDA had a fusion temperature (T_f) at 240°C, exhibited a nematic liquid crystalline phase, and had a narrow liquid crystalline range of 60°C. All of the copolyesters of MPBP with 4,4′-BDA and either 30 mol % 4-hydroxybenzoic acid (HBA), 6-hydroxy-2-naphthoic acid (HNA) or 50 mol % terephthalic acid (TA), 2,6-naphthale-nedicarboxylic acid (2,6-NDA) and low T_f values in the range of 210–230°C, exhibited a nematic phase, and had accessible isotropization transitions (T_i) in the range of 320–420°C, respectively. As expected, each of them had a broader range of liquid crystalline phase than the homopolymer. They had a “frozen” nematic, glassy order as determined with the wide-angle X-ray diffraction (WAXD) studies. The morphology of each of the “as-made” polyesters had a fibrous structure as determined with the scanning electron microscopy (SEM), which arises because of the liquid crystalline domains. Moreover, they had higher glass transition temperatures (T_g) in the range of 167–190°C than those of other liquid crystalline polyesters, and excellent thermal stabilities (T_d) in the range of 500–533°C, respectively. © 1995 John Wiley & Sons, Inc.