Structural changes in polymers of diethyl succinylsuccinate(1,4-diethoxycarbonyl-2,5-dihydroxy-1,4-cyclohexadiene) with diamines at high temperatures

The structural changes of the polymers having the following structures: at high temperatures were studied by the spectroscopic and thermal analysis. When the polymers were heated in air, they were oxidized predominantly to polymers having the structure: The rate of oxidation was fast and the reaction was almost completed within 2 hr at 180°C. In the case of polymer 3, an intramolecular cyclization to form acridone was detected as a minor reaction.     

Molecular confirmation and crystal structure of the β form of poly(ethylene oxybenzoate)

The crystal structure of the β form of poly(ethylene oxybenzoate) was analyzed by x-ray diffraction. Four nearly extended molecular chains pass through a unit cell with parameters a = 8.19 Å, b = 11.07 Å, c (fiber axis) = 19.05 Å, β = 114.8°, and the space group P2₁/n-C. The structural difference between the α and β forms is mainly due to the internal rotation angles for the virtual bond and the ? CH₂? CH₂? bond. They are essentially in trans confirmation in the β form, while the α form contains cis and gauche (? CH₂? CH₂? ) conformations.     

Flash Photolysis of 2,4,6-Trinitrotoluene Solutions

Flash photolysis of 2,4,6-trinitrotoluene solutions (TNT) indicates a photochemically induced isomerization leading to the aci-quinoid isomer with an absorption maximum at 460 nm in nonpolar solvents, or the conjugate base of the aci-quinoid isomer with absorption maxima at 500, 540, and 630 nm in polar solvents. Both species, the quinoid isomer and the conjugate base, have transient existence and their identification was based on detailed spectroscopic and kinetic studies presented here. The magnitude of the negative charge on the transient conjugate base was determined with salt effect experiments and found to be equal to unity.     

Darstellung und Eigenschaften von Ti-substituierten N-Heterocyclen

Preparation and Properties of Ti-substituted N-Heterocycles The compounds (x = 2 to 6) have been prepared by transamination of Ti(NMe₂)₄ with the heterocyclic amines and have been characterised by elemental analyses and ¹H NMR and IR spectroscopy. The dependence on both x and n of the thermal decomposition has been studied for the series and . The results can be interpreted in terms of the steric strain of the R₂N and substituents. Apart from the piperidido groups none of the ligands exhibit protective group properties comparable to the R₂N groups.     

Iodine catalyzed synthesis of α,α'‐bis(substituted benzylidene)‐1‐carbethoxy‐4‐piperidone

A facile and efficient method for the preparation of α,α′‐bis(substituted benzylidene)‐1‐carbethoxy‐4‐piperidone is described using iodine as a catalyst in acetonitrile. The reaction proceeds rapidly at room temperature, giving high yields of products.     

Zur Darstellung von Cyclophosphaten,Cyclophosphatophosphonaten, Diphosphonaten und Diphosphiten in Harnstoffschmelzen

Preparation of Cyclophosphates, Cyclophosphatophosphonates, Diphosphonates, and Di-phosphites in Urea Melts Ammonium cyclotriphosphate (NH₄)P₃O₉, ammonium cyclotetraphosphate [P^IV? P^IV ? O? ]₂, ammonium cyclotriphosphatophosphonates Ammonium organyldiphosphonates And ammonium diphosphites are prepared in high yields on heating acidic phosphates, phosphonates, and phosphites in urea or urea/ammonium nitrate melts. The mechanism of the dehydration of phosphorus compounds containing POH groups in molten urea is discussed.     

Coherent Dynamic Structure Factor of a Polymer Chain Confined Into a Harmonic Radial Potential

The coherent dynamic structure factor of a single polymer chain is calculated based on the model of a Rouse polymer chain constrained (confined) by a harmonic radial potential and its behavior in different limiting cases is analyzed. The strength of confinement is characterized using an effective diameter of the harmonic radial potential as a model parameter. The method provides a reliable model to study the crossover between unconstrained (Rouse) and constrained dynamics.

     

Effect of gegen ion in cationic polymerization and copolymerization of trioxane

p-Chlorophenyldiazonium hexafluorophosphate has been reported to be a superior catalyst for cationic polymerization and copolymerization of trioxane as compared to boron trifluoride dibutyl etherate (BF₃·Bu₂O)¹. In the present investigation the effect of anions derived from elements in Group VA, AsF and SbF, has been ascertained. It has been concluded that p-chlorophenyldiazonium hexafluoroarsenate is also a superior catalyst to boron trifluoride dibutyletherate (BF₃·Bu₂O), while p-chlorophenyl-diazonium hexafluoroantimonate is inferior. Copolymers with the highest polymer yield (>95%) and molecular weight (intrinsic viscosity = 4 to 5) were obtained with Simple dependences on catalyst concentration have been observed to hold for a wide catalyst concentration range ([M]/[C]) = (1 to 20) × 10⁵: For the same relationships hold. However, the polymer yield (75%) and molecular weights (intrinsic viscosity ?1) are considerably lower while the extent of chain transfer is higher. Furthermore, the polymerization proceeds with explosive violence. The quantitative aspects resulting from polymerization, for the most part, can be interpreted in terms of the extent of dissociation of the propagating ions.     

Polyimides from dianhydrides and bis(p-aminophenyl) alkane diamines. I

Polyimides were synthesized from pyromellitic dianhydride (PMDA), 3,3′,4,4′-benzophenone tetracarboxylic dianhydride (BTDA), and three different diamines with the following general structure: where R is ethyl, propyl, or isobutyl. The poly(amic acids) obtained had inherent viscosities ranging from 0.30 to 0.93 and were thermally/chemically converted to polyimides. The thermal stability of the polyimides was evaluated by using dynamic thermogravimetric analysis in air. Physical and thermal properties of these polyimides were compared with that obtained by reacting 2,2-bis(4-aminophenyl) propane and PMDA/BTDA.     

Salt effects in the base-catalyzed polymerization of unsaturated amide compounds. II. Polymerization of p-vinylbenzamide and acrylamide

In the presence of a variety of inorganic salts, p-vinylbenzamide underwent vinyl-type polymerization by anionic initiators to form the polystyrene derivative, whereas in dimethyl sulfoxide as solvent the aromatic polyamide was always obtained through a proton-transfer mechanism regardless of the presence of the salts. In the presence of of the salts, acrylamide is generally polymerized to the polyamide through a proton transfer reaction.     

Studies on Radical Cations I. Molecular and electronic structure of [3]radialene cation produced by γ-irradiation in condensed phase

γ-Irradiation of tris (methylidene)-cyclopropane (‘[3]radialene’) 1 in a rigid electron scavenging matrix (butylchoride/i-pentane, 1:1) at 77 K leads to formation of its molecular cation 1 ⁺. Slight softening of the matrix by a temperature increase of 3–5 K results in formation of a newly absorbing species, tentatively assigned arising from structrral relaxation of 1 ⁺ by π-bond rotation:      

Ab-initioMRD–CI calculations on a C?NO2 decomposition pathway of nitrobenzene

To study molecular decomposition pathways it is necessary to use ab initio multireference determinant–configuration interaction or MCSCF (multiconfiguration SCF ) calculations. The MRD –CI (multireference double excitation–configuration interaction technique of Buenker and Peyerimhoff) calculations on the decomposition pathway of nitrobenzene were carried out using all of the occupied molecular orbitals in the region of the bond being dissociated, plus all of the virtual orbitals. An effective CI Hamiltonian was used into which were folded the effects of all of the occupied molecular orbitals from which excitations were not allowed. So far we have investigated the lowest ¹A₁, ³A₁, ¹A₂, ³A₂, ¹B₁, ³B₁, ¹B₂, ³B₂ states and are investigating the higher states. Our results show a wealth of structure in the potential energy surfaces for the various electronic states of nitrobenzene as a function of distance. A number of the states are predissociative and change dominant configuration one or more times along these potential energy surfaces.     

Reactions of isopropylperoxy radicals with NO and NO2

The rate constants for the reactions have been measured directly by flash photolysis and kinetic spectroscopy. At room temperature, k₃ = (3.4 ± 0.1) × 10⁹ L/mol·s, independent of pressure in the range of 55–400 torr, and k₆ = (2.1 ± 0.2) × 10⁹ L/mol·s.     

Poly(divinylsiloxyethylene glycol) — synthesis and photoresist characteristics

Poly(siloxyethylene glycol)

1 The term “poly(siloxyethylene glycol)” was used by us in our previous paper¹⁰ for the following polymer skeleton:

with pendant vinyl groups (PVSE) was synthesized by polycondensation of oligo(ethylene glycol) (MW = 300) and diaminodivinylsilane. PVSE300 thus obtained is soluble in cold water. The PVSE300 coupled with a polythiol compound shows properties of a negative working photoresist. A negative tone image was obtained by development with water at 4°C. PVSE300 is a new type of Si-containing polymer resist which can be developed by water.     

Kinetics,mechanism, and endo selectivity of Diels–Alder reactions of alkylmonosubstituted ethenes with cyclohexa-1,3-diene in the gas phase

The reactions where Y = CH₃ (M), C₂H₅ (E), i? C₃H₇ (I), and t? C₄H₉ (T) have been studied between 488 and 606 K. The pressures of CHD ranged from 16 to 124 torr and those of YE from 57 to 625 torr. These reactions are homogeneous and first order with respect to each reagent. The rate constants (in L/mol·s) are given by The Arrhenius parameters are used as a test for a biradical mechanism and to discuss the endo selectivity of the reactions.     

Synthesis and chemistry of N‐arylated pyrano[2,3‐c]pyrazoles

Novel N2‐arylated pyrano[2,3‐c]pyrazol‐6‐ones 2 can be prepared in a selective manner by generating the anion of 1 ( R?H ) with lithium hexamethyldisilazide in DMF and quenching with activated aryl halides. Sterically demanding groups such as phenyl as in 5 reduce reactivity significantly while electronwithdrawing substituents such as trifluoromethyl and phenyl at C4 of the pyranone ring as in 10 and 15 render the pyranone carbonyl particularly susceptible to attack by nucleophiles resulting in ring‐opening to give novel crotonyl derivatives. Proof of structure required a variety of nmr methods involving proton, carbon, and nitrogen nuclei.     

Synthesis and psychotropic properties of furyl- and thienyl-germatranes

Trihalogermyl-furans and -thiophenes were prepared by inserting germanium dibromide (GeBr₂) generated from the dibromogermane(II) dioxanate complex into the carbon-halogen bond of halo-furans and -thiophenes. Their ethanolysis and transesterification by triethanolamine yielded the germatranes which were subjected to psychotropic activity assays. The psychotropic properties of germatranes were found to depend on the type of the heterocycle and on the position of the germatrane moiety.     

Ketene dithioacetals‐source for different heterocycles

Some pyrazoline, isoxazoline and pyrimidine derivatives were synthesized from ketene dithioacetals using appropriate nucleophiles.