Electroreduction of benzyl viologen cations, and nucleation and growth of neutral benzyl viologen species on platinum and mercury electrodes

The electrodeposition of neutral benzyl viologen species (BV⁰) onto platinum and mercury electrodes from aqueous 0.1 M Na₂SO₄ solutions has been investigated by applying voltammetric and potentiostatic step techniques. It was found that the deposition of BV⁰ molecules occurs through direct nucleation onto the electrode surface and three-dimensional growth under mass transport control. The steady state nucleation rate was studied as a function of the overpotential, and the numbers of molecules in the critical nuclei on the different substrates were obtained.     

成核剂和促进剂对聚对苯二甲酸乙二酯结晶的影响

研究了一种成核剂和结晶促进剂及其混合物对聚对苯二甲酸乙二酯（ＰＥＴ）结晶过程和熔融行为的影响．结果表明,成核剂的引入降低了ＰＥＴ的结晶成核界面自由能,起到促进ＰＥＴ结晶成核的作用,从而加快了ＰＥＴ的结晶速度．而结晶促进剂对ＰＥＴ的结晶速度影响很小,不能促进ＰＥＴ的成核结晶,但能使ＰＥＴ结晶更完善,使ＰＥＴ的结晶度提高．当两者并用时,ＰＥＴ由熔体降温的结晶行为主要由成核剂控制,而成核促进剂的作用不明显．     

Thermodynamics and Kinetics of Prenucleation Clusters,Classical and Non‐Classical Nucleation

Recent observations of prenucleation species and multi‐stage crystal nucleation processes challenge the long‐established view on the thermodynamics of crystal formation. Here, we review and generalize extensions to classical nucleation theory. Going beyond the conventional implementation as has been used for more than a century now, nucleation inhibitors, precursor clusters and non‐classical nucleation processes are rationalized as well by analogous concepts based on competing interface and bulk energy terms. This is illustrated by recent examples of species formed prior to/instead of crystal nucleation and multi‐step nucleation processes. Much of the discussed insights were obtained from molecular simulation using advanced sampling techniques, briefly summarized herein for both nucleation‐controlled and diffusion‐controlled aggregate formation.     

Interfacial study of cubic boron nitride films deposited on diamond

We have studied the nucleation and growth of cubic boron nitride (cBN) films deposited on silicon and diamond-coated silicon substrates using fluorine-assisted chemical vapor deposition (CVD). These comparative studies substantiate that the incubation amorphous/turbostratic BN layers, essential for the cBN nucleation on silicon, are not vital precursors for cBN nucleation on diamond, and they are inherently eliminated. At vastly reduced critical bias voltage, down to -10 V, cBN growth is still maintained on diamond surfaces, and cBN and underlying diamond crystallites exhibit an epitaxial relationship. However, the epitaxial growth is associated with stress in the cBN-diamond interfacial region. In addition, some twinning of crystallites and small-angle grain boundaries are observed between the cBN and diamond crystallites because of the slight lattice mismatch of 1.36%. The small-angle grain boundaries could be eliminated by imposing a little higher bias voltage during the initial growth stage. The heteroepitaxial growth of cBN films on different substrate materials are discussed in the view of lattice matching, surface-energy compatibility, and stability of the substrate against ion irradiation.     

Miniemulsion copolymerization of vinyl acetate and butyl acrylate. III. Experimental evidence for the role of the cosurfactant

The role of the cosurfactant (hexadecane) in the miniemulsion copolymerization of 50 : 50 molar ratio vinyl acetate–butyl acrylate monomer mixture is analyzed from an experimental point of view. The main factor responsible for the different kinetic behavior between the miniemulsion and conventional emulsion copolymerization processes was found to be the different particle nucleation mechanism operating in each process. Experimental evidence is presented indicating that in the miniemulsion copolymerization particle nucleation takes place in the preformed stable submicron monomer droplets.     

Adsorption Isotherms for Concentrated Aqueous-Organic Solutions (CAOS)

From an engineering point of view the present authors have proposed the simple model of a homogeneous nucleation relationship in the liquid phase that can predict the number concentration of nucleated particles in various operating conditions. Experiments of liquid-phase nucleation in which the precursor monomers were generated by several methods have successfully confirmed the predictions of the model. In the present paper, our previous model of homogeneous nucleation is extended to the case in which the precursor monomers are generated in a gas-phase system. First, a relationship between number concentration and mean volume diameter of nucleated aerosol particles and operating conditions is obtained considering the free molecular regime around the critical nuclei, which is the main difference with the liquid phase. Second, the validity of the relation lies in experimental use of dioctyl sebacate particles generated by evaporation-condensation. As a result, the predictions are in excellent agreement with the experimental results after considering substantial losses of monomers and particles to the walls of the experimental system because in the gasphase the diffusion velocity and the critical supersaturation ratio of monomer are higher than those in the liquid phase. Copyright 2000 Academic Press.     

A random walk through the dynamics of homogeneous vapor-liquid nucleation

A method of calculating rates of homogeneous vapor-liquid nucleation based on Langevin dynamics of a few relevant degrees of freedom on a free-energy surface is proposed. The surface is obtained here from simulation and from a semi empirical expression. The mass and friction coefficients are derived from atomistic umbrella-sampling molecular-dynamics simulations. The calculated nucleation rate agrees with atomistic simulations for one particular state point of the Lennard-Jones fluid. The present method is about four orders of magnitude more computationally efficient than the direct atomistic simulation of the transmission coefficient.     

Optimization of electrospray interface and quadrupole ion trap mass spectrometer parameters in pesticide liquid chromatography/electrospray ionization mass spectrometry analysis

Optimization of both the ionization process and ion transportation in the mass spectrometer is of crucial importance in order to achieve high sensitivity and low detection limits and acceptable accuracy in liquid chromatography/electrospray ionization mass spectrometry (LC/ESI‐MS) analysis. In this paper four optimization procedures of electrospray interface and quadrupole ion‐trap mass spectrometer parameters (ESI‐MS) (nebulizer gas and drying gas flow rate, end plate voltage, capillary voltage, skimmer voltage, octopoles direct current and radio frequency, trap drive and lens voltages) were studied on three pesticides – thiabendazole, aldicarb and imazalil. The results demonstrate that the methodology of optimization strongly influences the effectiveness of finding true optima of the operating parameters. Both eluent flow rate and composition during optimization have to mimic the situation during real analysis as closely as possible in order to achieve parameters giving the highest sensitivity. Therefore, post‐column addition of analyte to the mobile phase identical in composition to the one in which analyte elutes during real analysis combined with software‐based optimization was found to be the most effective and fastest method for achieving intensity maxima. The parameters most strongly affecting ion formation and transportation, hence sensitivity, were capillary voltage, direct current of the first octopole, trap drive and the second lens for all pesticides under study. In addition to sensitivity and detection limit matrix effect was considered in the optimization process. It was found that the matrix effect can be reduced but not eliminated by adjusting the ESI and MS parameters. The optimal parameters from the point of view of the matrix effect can only be found with factorial design. Parameters giving higher sensitivity tended to be more affected by matrix effect causing higher ionization suppression by co‐eluting compounds. Copyright © 2010 John Wiley & Sons, Ltd.     

Electroluminescent zinc(II) bis(8-hydroxyquinoline): structural effects on electronic states and device performance

We present direct evidence for stable oligomers in vacuum-deposited thin films of zinc(II) bis(8-hydroxyquinoline) (Znq(2)). The tetramer [(Znq(2))(4)] is the energetically favored configuration in both the single crystal and the vacuum-deposited thin film. Oligomerization leads to distinct, symmetry-driven differences between the electronic states in Znq(2) and those in the archetypal organic electroluminescent molecule tris(8-hydroxyquinoline) aluminum (Alq(3)). In the case of the Znq(2) tetramer, symmetry leads to an extended network of overlapping pyridyl and phenolato moieties in the solid film. Analysis of the electronic structure of (Znq(2))(4) calculated by ab initio Hartree-Fock (HF) methods reveals a localization and energy shift of high-lying occupied and low-lying unoccupied states on symmetry related ligands located on opposite sides of the supramolecular structure resulting in a dipole moment for (Znq(2))(4) tetramer close to zero. The optimal pi-overlap pathways, altered charge distributions, and extended electronic states of tetrameric Znq(2) may be expected to enable low operating voltage organic light-emitting devices (OLEDs) based on Znq(2). We present preliminary evidence that the operating voltage of (Znq(2))(4)-based OLEDs is indeed lower than that of identical devices made with Alq(3). Strategic substitution of 8-hydroxyquinoline ligands and control of the structural symmetry of the corresponding metal chelates may offer a route to high efficiency and low operating voltage small molecule OLEDs.     

Vapor-to-droplet transition in a Lennard-Jones fluid: simulation study of nucleation barriers using the ghost field method

We report a comprehensive Monte Carlo (MC) simulation study of the vapor-to-droplet transition in Lennard-Jones fluid confined to a spherical container with repulsive walls, which is a case study system to investigate homogeneous nucleation. The focus is made on the application of a modified version of the ghost field method (Vishnyakov, A.; Neimark, A. V. J. Chem. Phys. 2003, 119, 9755) to calculate the nucleation barrier. This method allows one to build up a continuous trajectory of equilibrium states stabilized by the ghost field potential, which connects a reference droplet with a reference vapor state. Two computation schemes are employed for free energy calculations, direct thermodynamic integration along the constructed trajectory and umbrella sampling. The nucleation barriers and the size dependence of the surface tension are reported for droplets containing from 260 to 2000 molecules. The MC simulation study is complemented by a review of the simulation methods applied to computing the nucleation barriers and a detailed analysis of the vapor-to-droplet transition by means of the classical nucleation theory.     

Application of polyamorphism in water to spontaneous crystallization of emulsified LiCl-H2O solution

Aqueous solutions are widely explained by the hydration or the bound waterfree water notion. Amorphous polymorphism (polyamorphism) in pure water, which is presently under vigorous discussion, may provide a different view over the solutions. Here, I changed pressure, P, temperature, T, and concentration, C, of emulsified LiCl-H2O solutions and studied their freezing by detecting its heat evolution. It was experimentally indicated that the homogeneous nucleation of low-density crystalline ice I (phase Ih or Ic), in pure water and in solutions, connects to the polyamorphic transition of high-density amorphous ice (HDA) to low-density amorphous ice (LDA). Thus, the polyamorphism of water relates to the phase behavior of aqueous solution. In accordance with the recent simulation result, the nucleation was thought to occur in two stages: the appearance of the LDA-like state and the crystallization. Usefulness of the polyamorphic point of view about the solutions was seen.     

Pyrene-based chemosensor detects picric acid upto attogram level through aggregation enhanced excimer emission

A pyrene-based small molecular weight probe, exhibiting aggregation enhanced excimer emission has been synthesized. The crystalline emissive form detects 2,4,6-trinitrophenol (picric acid) at parts-per-billion concentration in solution and as low as 0.46 attogram in direct contact mode, operating predominantly in a static quenching mechanism, proposed on the basis of steady state and life-time fluorescence measurements.     

Molecular dynamics simulations of cluster nucleation during inert gas condensation

Molecular dynamics simulations of vapor-phase nucleation of germanium in an argon atmosphere were performed and a unexpected channel of nucleation was observed. This channel, vapor-induced cluster splitting, is important for more refractory materials since the critical nucleus size can fall below the size of a dimer. As opposed to conventional direct vapor nucleation of the dimer, which occurs by three-body collisions, cluster-splitting nucleation is a second-order reaction. The most important cluster-splitting reaction is the collision of a vapor atom and a trimer that leads to the formation of two dimers. The importance of the cluster-splitting nucleation channel relative to the direct vapor nucleation channel is observed to increase with decreasing vapor density and increasing ratio of vapor to carrier gas atoms.     

Adaptive nematic liquid crystal lens array with resistive layer

ABSTRACT

We propose an adaptive nematic liquid crystal (LC) lens array using a dielectric layer with low dielectric constant as resistive layer. With the resistive layer and periodic-arranged iridium tin oxide (ITO) electrodes, the vertical electric field across the LC layer varies linearly over the lens aperture is obtained in the voltage-on state. As a result, a centrosymmetric gradient refractive index profile within the LC layer is generated, which causes the focusing behaviour. As a result of the optimisation, a thin cell gap which greatly reduces the switching time of the LC lens array can be achieved in our design. The main advantages of the proposed LC lens array are in the comparatively low operating voltage, the flat substrate surface, the simple electrodes, and the uniform LC cell gap. The simulation results show that the focal length of the LC lens array can be tuned continuously from infinity to 3.99 mm by changing the applied voltage.     

A push/pull surface-mode liquid-crystal shutter: Technology and applications

The construction, operating principles and electro-optics of a surface-mode liquid-crystal shutter are reviewed. The shutter is composed of two glass plates, the inner surfaces of which are coated with a transparent electrically conductive layer. The substrates are treated to induce parallel director alignment. Polarizers are placed on the front and back of the cell oriented at right angles to each other and at 45° to the director. In the surface mode of operation a sustaining voltage is applied to the cell. This causes the director in the centre of the cell always to be oriented parallel to the electric field. The amplitude of the applied voltage determines the thickness of the surface layer-the layer in which the director orientation varies from parallel to the surface to parallel to the electric field. Light travelling through the cell will encounter retardation only in the surface layers. Hence the voltage controls the retardation of the cell, and by that means the polarization state of the light travelling through the cell. By adjusting the voltage so that the retardation is changed from 0λ to ½λ the shutter can switch from open to closed. It is possible to construct a faster-switching shutter. This so-called push/pull shutter is composed of three elements in optical series. The first two are surface-mode cells oriented such that their directors are perpendicular. The third element is a quarter-wave plate with its axes parallel to the directors. The three elements are placed between orthogonal polarizers, with the directors oriented at 45° to the polarizers axes. The closed state of the shutter is obtained by placing one shutter in the high-voltage 0λ state and the other in the low-voltage ¼λ state. The open state of the shutter is obtained by switching the voltage levels applied to the two cells. The operating principles and the electro-optics of this device are discussed in detail.     

On the radical mechanism for photoinduced nucleation of alkane vapors

The addition of 10^?5 — 2 Torr of NO, a radical scavenger, is found to significantly quench the rate of photonucleation of nonane by NO₂ or CH₃I in a diffusion cloud chamber. This confirms a recently proposed radical mechanism for the photoinduced nucleation of these systems. The photonucleation rate of nonane induced by o-tolualdehyde (a system whose mechanism is not known) is similarly quenched by the addition of small amounts of NO, suggesting a radical mechanism. A mechanism for this system, based upon the formation of nonane radicals (resulting from hydrogen abstraction from nonane by the carbonyl molecules in the n,π* singlet or triplet state) followed by further reaction of the radicals to form low vapor pressure species, is discussed. Acetone, a system known to dissociate into radicals, is found to photoinduce nucleation of nonane when excited to the lowest singlet or triplet excited states. This adds further support to the proposed radical mechanism and suggests that acetone dissociates in its lowest singlet as well as its lowest triplet state. A theoretical model is outlined in which the production of large involatile alkanes (dimers and higher polymers) are formed from an initially produced nonane radical. These results are combined with binary nucleation theory in order to calculate the effect of these species on the rate of nucleation. These calculations indicate that low concentrations of these involatile species can indeed induce nucleation. The ability of small, photochemically produced polymers to induce nucleation is also examined and the time dependent space distribution of polymers (e.g., vinyl polymers) generated by chain transfer from a single free radical is derived. The small polymers formed in this process are analogous to the species formed in the photoinduced nucleation of alkane vapors.     

A guided wave study of the voltage dependent director configuration in a nematic liquid crystal layer with finite surface tilt

Prism coupling techniques have been used to excite optical modes in a thin nematic liquid crystal with finite surface tilt in order to study the voltage dependent director profile. The surface tilts are opposite in character and it is found that at zero applied volts the stable configuration is the substantially horizontal state. On applying the field this state is broken, probably transforming to the twisted vertical state. By modelling all the data obtained, the detailed behaviour of the director profile has been fully characterized yielding much information, including the change of surface tilt with applied voltage. For the nematic liquid crystal E7, this gives a voltage induced surface tilt of approximately 0.67° V^-1 for a 5.65 μm thick cell. Also using a boundary layer model, it has been possible to analyse the free energy in the cell and hence show that the observed twisted vertical state is the expected stable state under the field applied.     

Complete thermodynamically consistent kinetic model of particle nucleation and growth: numerical study of the applicability of the classical theory of homogeneous nucleation

A complete thermodynamically consistent elementary reaction kinetic model of particle nucleation and growth from supersaturated vapor was developed and numerically evaluated to determine the conditions for the steady-state regime. The model treats all processes recognized in the aerosol science (such as nucleation, condensation, evaporation, agglomerationcoagulation, etc.) as reversible elementary reactions. It includes all possible forward reactions (i.e., of monomers, dimers, trimers, etc.) together with the thermodynamically consistent reverse processes. The model is built based on the Kelvin approximation, and has two dimensionless parameters: S0-the initial supersaturation and Theta-the dimensionless surface tension. The time evolution of the size distribution function was obtained over the ranges of parameters S0 and Theta. At low initial supersaturations, S0, the steady state is established after a delay, and the steady-state distribution function corresponds to the predictions of the classical nucleation theory. At high initial supersaturations, the depletion of monomers due to condensation on large clusters starts before the establishing of the steady state. The steady state is never reached, and the classical nucleation theory is not applicable. The boundary that separates these two regimes in the two dimensionless parameter space, S0 and Theta, was determined. The model was applied to several experiments on water nucleation in an expansion chamber [J. Wolk and R. Strey, J. Phys. Chem. B 105, 11683 (2001)] and in Laval nozzle [Y. J. Kim et al., J. Phys. Chem. A 108, 4365 (2004)]. The conditions of the experiments performed using Laval nozzle (S0=40-120) were found to be close to the boundary of the non-steady-state regime. Additional calculations have shown that in the non-steady-state regime the nucleation rate is sensitive to the rate constants of the initial steps of the nucleation process, such as the monomer-monomer, monomer-dimer, etc., reactions. This conclusion is particularly important for nucleation from supersaturated water vapor, since these processes for water molecules at and below the atmospheric pressure are in the low pressure limit, and the rate constants can be several orders of magnitude lower than the gas kinetic. In addition, the impact of the thermodynamic inconsistency of the previously developed partially reversible kinetic numerical models was assessed. At typical experimental conditions for water nucleation, S0=10 and Theta=10 (T=250 K), the error in the particle nucleation rate introduced by the thermodynamic inconsistency exceeds one order of magnitude.     

Optimisation of blue-phase liquid crystal with protrusion

The optimised structures of blue-phase liquid crystal display (BPLCD) with various protrusions were discussed in this article. The voltage-dependent transmittances for the cell with four protrusion shapes, wall-shaped electrode, trapezoid electrode, double penetration electrode and elliptical electrode, are simulated. The electrode gap and width and protrusion height’s effects on the optimised cell gap and the corresponding operating voltage are calculated. The optimised cell has the lowest operating voltage and relative high transmittance. The results are significant on design BPLCD with low operating voltage.