Rapid synthesis of optically active poly(amide-imide)s by direct polycondensation of aromatic dicarboxylic acid with aromatic diamines

4,4^′-(Hexafluoroisopropylidene)-N,N^′-bis(phthaloyl-l-leucine-p-amidobenzoic acid) (2) was prepared from the reaction of 4,4^′-(hexafluoroisopropylidene)-N,N^′-bis(phthaloyl-l-leucine) diacid chloride with p-aminobenzoic acid. The direct polycondensation reaction of monomer (2) with p-phenylenediamine (2a), 4,4^′-diaminodiphenylsulfone (2b), 2,4-diaminotoluene (2c), 2,6-diaminopyridine (2d), m-phenylene diamine (2e), benzidine (2f), 4,4^′-diaminodiphenylether (2g) and 4,4^′-diaminodiphenyl methane (2h) was carried out in a medium consisting of triphenyl phosphite, N-methyl-2-pyrolidone, pyridine, and calcium chloride. The homogeneous mixture was heated at 220 °C for 1 min under nitrogen. The resulting poly(amide-imide)s (PAIs) having inherent viscosities 0.27-0.78 dl/g were obtained in high yield and are optically active and thermally stable. All of the above polymers were fully characterized by IR spectroscopy, elemental analyses and specific rotation. Some structural characterization and physical properties of this new optically active PAIs are reported.     

Ferrocenoyl peptides with sulfur-containing side chains: synthesis, solid state and solution structures

The synthesis and full characterization of a number of amino acid and dipeptide derivatives with sulfur-containing side chains derived from ferrocene carboxylic acid and ferrocene-1,1′-dicarboxylic acid is presented. In particular, compounds Fc-CO-(Aaa)_n-OMe (4) and Fe[C₅H₄-CO-(Aaa)_n-OMe]₂ (3) with (Aaa)_n = Cys(Bzl) (a), Cys(Bzl)-Cys(Bzl) (b), Cys(p-OMe-Bzl) (c), Cys(p-OMe-Bzl)-Cys(p-OMe-Bzl) (d), Met (e), and Met-Met (f) were prepared. Also, the free acid derivatives Fe[C₅H₄-CO-Met-OH]₂ (6e) and Fc-CO-Met-OH (7e) were prepared and characterized. The solid state structures of 3a, 4b, and 4e were determined by single crystal X-ray diffraction. Compound 3a shows a 1,3′ substitution pattern on the Cp rings in the solid state. Structures in solution were determined by NMR, IR and CD spectroscopy, with particular emphasis on the question of hydrogen bonding and helical chirality of the metallocene. As an example, the full assignment for the Cp signals in the disubstituted derivative 3a was achieved by simulation of the ¹H NMR signals from the cyclopentadienyl ring in combination with 2D-NOESY spectra. In solution, 3a has the known 1,2′ substitution pattern, which is stabilized by intramolecular hydrogen bonds.     

Synthesis and properties of novel 5-(cyclohepta-2′,4′,6′-trienylidene)pyrimidine-2(1H),4(3H),6(5H)-triones: methodology for synthesizing cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborates

Novel condensation reaction of tropone with N-substituted and N,N′-disubstitued barbituric acids in Ac₂O afforded 5-(cyclohepta-2′,4′,6′-trienylidene)pyrimidine-2(1H),4(3H),6(5H)-trione derivatives (8a-f) in moderate to good yields. The ¹³C NMR spectral study of 8a-f revealed that the contribution of zwitterionic resonance structures is less important as compared with that of 8,8-dicyanoheptafulvene. The rotational barriers (ΔG^‡) around the exocyclic double bond of mono-substituted derivatives 8a-c were obtained to be 14.51-15.03 kcal mol⁻¹ by the variable temperature ¹H NMR measurements. The electrochemical properties of 8a-f were also studied by CV measurement. Upon treatment with DDQ, 8a-c underwent oxidative cyclization to give two products, 7 and 9-substituted cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborates (11a-c·BF₄⁻ and 12a-c·BF₄⁻) in various ratios, while that of disubstituted derivatives 8d-f afforded 7,9-disubstituted cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborate (11d-f·BF₄⁻) in good yields. Similarly, preparation of known 5-(1′-oxocycloheptatrien-2′-yl)-pyrimidine-2(1H),4(3H),6(5H)-trione derivatives (14a-d) and novel derivatives 14e,f was carried out. Treatment of 14a-c with aq. HBF₄/Ac₂O afforded two kinds of novel products 11a-c·BF₄⁻ and 12a,c·BF₄⁻ in various ratios, respectively, while that of 14d-f afforded 11d-f. The product ratios of 11a-c·BF₄⁻ and 12a-c·BF₄⁻ observed in two kinds of cyclization reactions were rationalized on the basis of MO calculations of model compounds 20a and 21a. The spectroscopic and electrochemical properties of 11a-f·BF₄⁻ and 12a-c·BF₄⁻ were studied, and structural characterization of 11c·BF₄⁻ based on the X-ray crystal analysis and MO calculation was also performed.     

Selective fluorescence detection of nitroxyl over nitric oxide in buffered aqueous solution using a conjugated metallopolymer

A bithiophene-substituted poly(p-phenyleneethynylene) derivative (CP1) having water-solubilizing side chains was prepared and characterized. Copper(II)-induced quenching of CP1 emission was quantified in H₂O, MeCN/H₂O (90:10), and pH 7.4, 50 mM HEPES, 100 mM KCl buffer. In buffer, treatment of CP1-Cu(II) with nitroxyl (HNO) produces an immediate 2.1-fold increase in emission, whereas exposure to NO(g) effects no fluorescence restoration. The ability to distinguish HNO from NO chemically at physiological pH represents a productive step towards the development of selective, fluorescence-based biosensors for HNO.     

Reactivity studies of (η-arene)ruthenium dimeric complexes towards pyrazoles: isolation of amidines, bis pyrazoles and chloro bridged pyrazole complexes

The complex [(η⁶-p-cymene)Ru(μ-Cl)Cl]₂1 reacts with pyrazole ligands (3a-g) in acetonitrile to afford the amidine derivatives of the type [(η⁶-p-cymene)Ru(L)(3,5-HRR′pz)](BF4)₂ (4a-f), where L = {HNC(Me)3,5-RR′pz}; R, R′ = H (4a); H, CH₃ (4b); C₆H₅ (4c); CH₃, C₆H₅ (4d) OCH₃ (4e); and OC₂H₅ (4f), respectively. The ligand L is generated in situ through the condensation of 3,5-HRR′pz with acetonitrile under the influence of [(η⁶-p-cymene)RuCl₂]₂. The complex [(η⁶-C₆Me₆)Ru(μ-Cl)Cl]₂2 reacts with pyrazole ligands in acetonitrile to yield bis-pyrazole derivatives such as [(η⁶-C₆Me₆)Ru (3,5-HRR′pz)₂Cl](BF₄) (5a-b), where R, R′ = H (5a); H, CH₃ (5b), as well as dimeric complexes of pyrazole substituted chloro bridged derivatives [{(η⁶-C₆Me₆)Ru(μ-Cl) (3,5-HRR′pz)}₂](BF₄)₂ (5c-g), where R, R′ = CH₃ (5c); C₆H₅ (5d); CH₃, C₆H₅ (5e); OCH₃ (5f); and OC₂H₅ (5g), respectively. These complexes were characterized by FT-IR and FT-NMR spectroscopy as well as analytical data. The molecular structures¹ of representative complexes [(η⁶-C₆Me₆)Ru{3(5)-Hmpz}₂Cl]⁺5b, [(η⁶-C₆Me₆)Ru(μ-Cl)(3,5-Hdmpz)]₂²⁺5c and [(η⁶-C₆Me₆)Ru(μ-Cl){3(5)Me,5(3)Ph-Hpz}]₂²⁺5e were established by single crystal X-ray diffraction studies.     

Synthesis, properties, and oxidizing function of 6-substituted 7,9-dimethylcyclohepta[b]pyrimido[5,4-d]pyrrole-8(7H),10(9H)-dionylium tetrafluoroborates

Uracil-annulated heteroazulenes, 6-substituted 7,9-dimethylcyclohepta[b]pyrimido[5,4-d]pyrrole-8(7H),10(9H)-dionylium tetrafluoroborates 7a,b·BF₄⁻, which are the isoelectronic compounds of 5-dezazaflavin, were synthesized. X-Ray crystal analysis and MO calculations were carried out to clarify the structural characteristics of 7a,b·BF₄⁻. The stability of cations 7a,b is expressed by the pK_R+ values which were determined spectrophotometrically to be 10.9 and 11.2, respectively. The electrochemical reduction of 7a,b exhibited high reduction potentials at −0.84 and −0.87 (V vs Ag/AgNO₃) upon cyclic voltammetry (CV). A good linear correlation between the pK_R+ values and reduction potentials (E1_red) of 7a,b·BF₄⁻ and reference compounds 4·BF₄⁻ and 5·BF₄⁻ was obtained. In a search of the reactivity, reactions of 7a,b·BF₄⁻ with some nucleophiles, hydride and diethylamine, were carried out to clarify that the introduction of nucleophiles to give regio-isomers is dependent on the nucleophile. The photo-induced oxidation reactions of 7a,b·BF₄⁻ toward some alcohols under aerobic conditions were carried out to give the corresponding carbonyl compounds in more than 100% yield [based on compounds 7a,b·BF₄⁻], suggesting the oxidizing function of 7a,b·BF₄⁻ toward alcohols in the autorecycling process.     

Half-sandwich η-arene–ruthenium(II) complexes bearing 1-alkyl(benzyl)-imidazo[4,5-f][1,10]-phenanthroline (IP) derivatives: the effect of alkyl chain length of ligands to catalytic activity

The reaction of bromoalkanes (R–Br; (3), R=C_nH_2n+1, n=4 (a), 8 (b), 12 (c),18 (d)) and bromobenzyl derivatives (R′–Br; (4), R′=CH₂C₆H₂(CH₃)₃-2,4,6 (a); CH₂C₆H(CH₃)₄-2,3,5,6 (b); CH₂C₆(CH₃)₅ (c)) with 1H-imidazo[4,5-f][1,10]-phenanthroline (IP)(L₂) gave the corresponding 1-R-imidazo[4,5-f][1,10]-phenanthroline (IPR)(L_3a–d) and 1-R′-imidazo[4,5-f][1,10]-phenanthroline(IPR')(L_4a–c) ligands, respectively. Treatment of L_3a–d and L_4a–d with [Ru(p-cymene)Cl₂]₂ led to the formation of [Ru(p-cymene)(IPR)Cl]Cl (RuL_3a–d) and [Ru(p-cymene)(IPR′)Cl]Cl (RuL_4a–c). New ruthenium(II) complexes RuL_3a–d and RuL_4a–c were characterized by elemental analysis, FTIR, UV–visible and NMR spectroscopy. In order to understand effects of these changes on the N-substituent of imidazol on IP and how they translate to catalytic activity, these new RuL₂, RuL_3a–d and RuL_4a–c were applied in the transfer hydrogenation of ketones by 2-propanol in presence of potassium hydroxide. The activities of the catalysts were monitored by NMR and GC analysis.     

Zn(II), Cd(II) and Hg(II) complexes with 1-(p-methoxybenzyl)-2-(p-methoxyphenyl)benzimidazole: Syntheses, structures and luminescence

Five coordination compounds Zn(mbmpbi)₂Cl₂ (1), Zn(mbmpbi)₂Br₂ (2), Cd(mbmpbi)₂Cl₂ (3), Hg(mbmpbi)₂Cl₂ (4) and Hg(mbmpbi)₂Br₂ (5) were synthesized by the reaction of 1-(p-methoxybenzyl)-2-(p-methoxyphenyl)benzimidazole (mbmpbi) with the corresponding metal halides. The complexes have been characterized by elemental analysis, conductance measurements, FT-IR, ¹H NMR and photoluminescence spectral studies. The ligand mbmpbi exhibits the N-benzimidazole coordination. The structures of 3-5 have been determined by single crystal X-ray diffraction. These three complexes are isostructural, crystallizing in the monoclinic system, P2/n space group with a distorted tetrahedral geometry around the metal ion. Zn(II) and Cd(II) complexes show strong blue emission in solid state at room temperature.     

Synthesis and characterization of novel optically active poly(amide-imide)s via direct amidation

N,N′-Pyromelliticdiimido-di-l-methionine (3) was prepared from the reaction of pyromellitic dianhydride (1) with l-methionine (2) in glacial acetic acid and pyridine solution at refluxing temperature. The direct polycondensation reaction of the monomer diimide-diacid (3) with 1,3-phenylenediamine (4a), 1,4-phenylenediamine (4b), 2,6-diaminopyridine (4c), 3,5-diaminopyridine (4d), 4,4′-diaminodiphenylether (4e) and 4,4′-diaminodiphenylsulfone (4f) was carried out in a medium consisting of triphenyl phosphate, N-methyl-2-pyrolidone, pyridine and calcium chloride. The resulting poly(amide-imide)s having inherent viscosities 0.45-0.53 dl g⁻¹ were obtained in high yields and are optically active and thermally stable. All of the above compounds were fully characterized by IR spectroscopy, elemental analyses and specific rotation. Some structural characterization and physical properties of these new optically active poly(amide-imide)s are reported.     

Synthesis and structural characterization of ruthenium(II) complexes bearing phosphine-pyrazolyl based tripod ligands

Phosphine-pyrazolyl based tripod ligands ROCH₂C(CH₂Pz)₂(CH₂PPh₂) (R = H, Me, allyl; Pz = pyrazol-1-yl) were efficiently synthesized and characterized. Reactions of these ligands with [Ru(η⁶-p-cymene)Cl₂]₂ afforded complexes of the type [Ru(η⁶-p-cymene)Cl₂](L) (6-8) in which the ligands exhibit κ¹-P-coordination to the metal center. Complex [Ru(η⁶-p-cymene)Cl₂{Ph₂PCH₂C(CH₂OH)(CH₂Pz)₂}] (6) underwent chloride-dissociation in CH₂Cl₂/MeCN to give complex [RuCl(η⁶-p-cymene){κ²(P,N)-Ph₂PCH₂C(CH₂OH)(CH₂Pz)₂}][Cl] (9). Complexes 6-9 demonstrated poor to moderate catalytic activity in the transfer hydrogenation of acetophenone. All these complexes were fully characterized by analytical and spectroscopic methods and their molecular structures were determined by X-ray crystallographic study.     

Ring transformation of cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium ion to the corresponding pyrrole derivatives via troponeimine intermediates: photo-induced autorecycling oxidizing reactions of some amines

Ring transformation of 7,9-dimethylcyclohepta[b]pyrimido[5,4-d]furan- 8(7H),10(9H)-dionylium tetrafluoroborate 4⁺·BF₄⁻ to 7,9-dimethylcyclohepta[b]pyrimido[5,4-d]pyrrrole-8(7H),10(9H)-dionylium tetrafluoroborate 6a-d⁺·BF₄⁻ consists of the reaction of 4⁺·BF₄⁻ with amines and subsequent exchange of the counter-ion using aq. HBF₄. Reactions of 4⁺·BF₄⁻ with aniline and 4-substituted anilines afforded the corresponding pyrrole derivatives 6a-c⁺·BF₄⁻ directly in good yields. On the other hand, reaction of 4⁺·BF₄⁻ with benzylamine gave the troponeimine intermediate 9, which was not converted to 6d⁺·BF₄⁻ and reverted to 4⁺·BF₄⁻ by adding HBF₄; however, it was converted to 6d⁺·BF₄⁻ upon treatment with (COCl)₂ or SOCl₂, followed by exchange of the counter-ion. In a search for the characteristics of 9, inspection and comparison of the X-ray crystal analyses, NMR and UV-vis spectra, and CV measurement of 9 and N,N-disubstituted troponeimine derivatives 12 were carried out to suggest the remarkable structure of 12 having ionic C-O bonding between the imine-carbon atom and the oxygen atom of the barbituric acid moiety in the solid state. Thus, characteristics of 9 were ascribed to the sterically hindered and favorable conformation of N-protonated troponeimine intermediates. Furthermore, novel photo-induced oxidation reactions of a series of 4⁺·BF₄⁻, 5⁺·BF₄⁻, and 6a,e⁺·BF₄⁻ towards some amines under aerobic conditions were carried out to give the corresponding imines in 455-8362% yields [based on compounds 4⁺, 5⁺, and 6a,e⁺], suggesting the oxidation reaction occurs in an autorecycling process. Mechanistic aspects of the amine-oxidation reaction are also postulated.     

Synthesis of branched tri- to pentasaccharides representative of fragments of Shigella flexneri serotypes 3a and/or X O-antigens

Fragments of the {2)-[α-d-Glcp-(1→3)]-α-l-Rhap-(1→2)-α-l-Rhap-(1→3)-[Ac→2]-α-l-Rhap-(1→3)-β-d-GlcpNAc-(1→}_n ((E)AB_AcCD)_n polymer were synthesized. D(E)A, CD(E)A, _AcCD(E)A were obtained according to a linear strategy, whereas BCD(E)A and B_AcCD(E)A were derived from the condensation of appropriate BC and D(E)A building blocks. Oligosaccharides were synthesized as their propyl glycoside, relying on (i) the efficient trichloroacetimidate chemistry, (ii) a common EA allyl glycoside, and (iii) a 2-trichloroacetamido-d-glucopyranose precursor to residue D. Final Pd/C-mediated deprotection, run under a high pressure of hydrogen, ensured O-acetyl stability. All targets are parts of the O-antigen of Shigella flexneri 3a, a prevalent serotype. Non-O-acetylated oligosaccharides are shared by the S. flexneri serotype X O-antigen.     

Synthesis of the first examples of p-bromodienone and transannular spirodienone calixarene derivatives

The first examples of p-bromodienone calixarene derivatives (6-7 and 9-10) have been obtained by treatment of 1,5-dihydroxy-hexaalkoxycalix[8]arenes 5 or tripropoxycalix[4]arene 8 with trimethylphenylammonium tribromide and a saturated solution of NaHCO₃. The first transannular spirodienone derivative 11 was only obtained in the presence of NaOH or using the KOH/I₂/PEG-200 oxidizing system.     

The stereoselective synthesis of (E)-octafluoro-1,3,5-hexatriene and (3E,5E,7E)-dodecafluoro-1,3,5,7,9-decapentaene

(E)-(1,2-Difluoro-1,2-ethenediyl)bis[tributylstannane], 3, readily undergoes a Pd(PPh₃)₄/CuI-catalyzed cross-coupling reaction with iodotrifluoroethene to yield (E)-octafluoro-1,3,5-hexatriene, 4, in high isomeric purity. (1Z,3E,5Z)-(1,2,3,4,5,6-Hexafluoro-1,3,5-hexenetriyl)bis[tributylstannane], 7, was sequentially prepared from (1Z,3E,5Z)-(1,2,3,4,5,6-hexafluoro-1,3,5-hexenetriyl)bis[triethylsilane], 5, which was prepared via a Pd(PPh₃)₄/CuI-catalyzed cross-coupling reaction of 3 with (E)-1,2-difluoro-1-iodo-2-triethylsilylethene, 6. Pd(PPh₃)₄/CuI cross-coupling of 7 with iodotrifluoroethene gave (3E,5E,7E)-dodecafluoro-1,3,5,7,9-decapentaene, 8.     

Reactivity of M(en)Cl2 (M = Pd/Pt,en = 1,2-diaminoethane) with N,N′-bis(salicylidene)-p-phenylenediamine: Binding with hexafluorobenzene

Schiff base N,N′-bis(salicylidene)-p-phenylenediamine (LH₂) complexed with Pt(en)Cl₂ and Pd(en)Cl₂ provided [Pt(en)L]₂ · 4PF₆ (1) and Pd(Salen) (2) (Salen = N,N′-bis(salicylidene)-ethylenediamine), respectively, which were characterized by their elemental analysis, spectroscopic data and X-ray data. A solid complex obtained by the reaction of hexafluorobenzene (hfb) with the representative complex 1 has been isolated and characterized as 3 (1 · hfb) using UV–Vis, NMR (¹H, ¹³C and ¹⁹F) data. A solid complex of hfb with a reported Zn-cyclophane 4 has also been prepared and characterized 5 (4 · hfb) for comparison with complex 3. The association of hfb with 1 and 4 has also been monitored using UV–Vis and luminescence data.     

Effect of π-accepting substituent on the reactivity and spectroscopic characteristics of triarylbismuthanes and triarylbismuth dihalides

Competitive chlorination of p-substituted triarylbismuthanes 1 [(p-XC₆H₄)₃Bi; a: X = OMe, c: Cl, d: CO₂Et, e: CF₃, f: CN, g: NO₂] and trimesitylbismuthane (2,4,6-Me₃C₆H₂)₃Bi 1h by sulfuryl chloride was carried out against 1b (X = H) and the effect of these substituents on the formation of triarylbismuth dichlorides 2 was studied. The relative ratios 2/2b decreased with increasing electron-withdrawing ability of the substituents (2a/2b = 53/47, 2c/2b = 33/67, 2d/2b = 35/65, 2e/2b = 29/71, 2f/2b = 16/84, 2g/2b = 0/100, 2h/2b = 46/54), indicating a lowering of reactivity of the lone pair on the bismuth atom. Pd-Catalyzed degradation of 2a-g and their difluorides 3 giving biaryls 4 was promoted by the electron-withdrawing p-substituents in the equatorial aryl groups but suppressed by the more electronegative fluorine atoms in the apical positions. This is in fairly good accord with the stability of the trigonal bipyramidal geometry. The ¹³C NMR study of 1-3 showed that the signals due to the ipso carbons (C1) attached to the bismuth atom shift downfield with increasing electron-withdrawing nature of the p-substituents. No such tendency was observed in other aromatic ring carbons. The electronic effect on the C1 atoms, similar to that on the chlorination of 1 and degradation of 2 and 3, indicates the significant participation of the C1 atoms in these reactions through the Bi-C1 bonds.     

Preparation of three terbium complexes with p-aminobenzoic acid and investigation of crystal structure influence on luminescence property

Three new rare earth p-aminobenzoic acid complexes, [Tb₂L₆(H₂O)₂]_n (1), [Tb₂L₆(H₂O)₄]·2H₂O (2) and [Tb(phen)₂L₂(H₂O)₂](phen)L·4H₂O (3) (HL: p-aminobenzoic acid; phen: 1, 10-phenanthroline), with different structural forms are reported in this paper. Complex 1 is a polymolecule with a two-dimensional plane structure. Compound 2 is a binuclear molecule, and 3 appears to be a mononuclear complex. The fluorescence intensity, the fluorescence life-time and emission quantum yield of 2, which has two coordination water molecules, is better than those of 1, which has only one coordination water molecule. This is an unusual phenomenon for general fluorescent rare earth complexes. The fluorescence performance of 3 is the most unsatisfactory among the three complexes. Their crystal structures show that the coordination mode of the ligand is an important factor influencing the luminescence properties of a fluorescent rare earth complex.     

Synthesis and properties of bis(heteroazulen-3-yl)methyl cations and bis(heteroazulen-3-yl)ketones

The synthesis and properties of a novel type of bis(heteroazulen-3-yl)methyl cations, bis(2-oxo-2H-cyclohepta[b]furan-3-yl)methyl cation salt and nitrogen analogues, (9a-c·PF₆⁻) and (9a-c·BF₄⁻), as well as bis(heteroazulen-3-yl)ketones (12a-d) are studied. The synthetic method was based on a TFA-catalyzed electrophilic aromatic substitution on the heteroazulenes (6a-d) with paraformaldehyde to afford the corresponding disubstituted methane derivatives 7a-d, followed by oxidative hydrogen abstraction with DDQ, and subsequent exchange of the counter-anion by using aq. HPF₆ or aq. HBF₄. In addition, the reaction of 7a-d with 2.2 equiv. amounts of DDQ afforded carbonyl compounds 12a-d. The delocalization of the positive charge of 9a-c was evaluated by the ¹H and ¹³C NMR spectral data. The thermodynamic stability of cations 9a-c was evaluated to be in the order 9a<9b<9c on the basis of their reduction potentials measured by cyclic voltammetry (CV) and pK_R+ values (2.6-10.3) obtained spectrophotometrically. The reduction waves of cations 9a-c were irreversible, suggesting the dimerization of the radical species generated by one-electron reduction. This was demonstrated by the reduction of 9a·BF₄⁻ with Zn powder to give dimerized product 14a. In addition, the quenching of 9a·BF₄⁻ with MeOH/NaHCO₃ gives ether derivative 15a, which is proposed for the precursor for synthesizing tris(heteroazulene)-substituted methyl cations bearing two different heteroazulene-units.     

Bismuth(III) bis(trifluoromethanesulfonyl)amide

Bismuth(III) bis(trifluoromethanesulfonyl)amide (Bi(NTf₂)₃, 3) has been prepared from the reaction of protiodemetallation of tri-p-tolylbismuth by a stoichiometric amount of bis(trifluoromethanesulfonyl)amine (1). The intermediates BiPh_3−n(NTf₂)_n (n=2 (4), 1 (5)) resulting from the reaction of 1 with triphenylbismuth have also been isolated. The amide 3 was able to catalyze the benzoylation and the benzenesulfonylation of toluene.     

Photoinduced cycloadditions of N-methyl-1,8-naphthalenedicarboximides with alkynes

Photoinduced cycloadditions of N-methyl-1,8-naphthalenedicarboximide 1 with phenylacetylenes 2a-2c, cyclopropylacetylene 2d, diphenylacetylenes 2e-2f and 1-phenylpropyne 2g were investigated. In the case of phenylacetylenes 2a, 2b and cyclopropylacetylene 2c, photoreaction with 1 takes place at the naphthalene C(1)C(2) bond to give the cyclobutene products. For 4-methoxyphenylacetylene 1c, the cyclobutene 3c is obtained together with the 4-benzo[a]thebenidinone 4c derived from a primary oxetene product formed by [2+2] addition of the imide carbonyl with the alkyne. Similar to 2c, photocycloaddition of 1 with 2e and 2f gave the cyclobutenes 7e, 7f, 8f and the 4-benzo[a]thebenidinone products 9e, 9f and 10f, respectively, derived from the corresponding oxetenes. Photoreaction of 1 with 2g gave cyclobutene 7g and benzo[a]thebenidinone 9g. Sensitization experiment and internal heavy atom effect study showed that these reactions proceed from the ππ* singlet excited state of 1. Estimation of the free energy change for electron transfer between ¹1* and the alkynes and the calculation of charge and spin density distribution in the anion radical of 1 and the cation radical of the alkynes suggested that the cyclobutene products are formed by direct [2+2] cycloaddition of ¹1* with the alkyne, while the formation of the oxetene products is the result of electron transfer interaction between ¹1* and the alkyne. The regioselectivity in the oxetene formation is accounted for by charge and spin density distribution in the anion radical of 1 and the cation radical of the alkyne.