Synthesis and characterization of novel conjugated copolymers containing 3,4-dialkoxythiophene and 1,3,4-oxadiazole units

In this report we describe the synthesis, optical and electrochemical properties of new conjugated copolymers (P1-P4) based on 3,4-dialkoxythiophene and 1,3,4-oxadiazole units. The copolymers are prepared using the precursor polyhydrazide route. The chemical structures of the copolymers are confirmed using FTIR, NMR spectroscopy and CHNS analysis. The polymers exhibit good thermal stability with the onset decomposition temperature in nitrogen at around 300 °C. The optical and charge-transporting properties of the copolymers are investigated by UV-visible absorption spectroscopy, fluorescence emission spectroscopy and cyclic voltammetry. The polymers depicted blue/green fluorescence under the irradiation of UV light. Cyclic voltammetry studies reveal that these copolymers have low-lying LUMO energy levels ranging from −3.28 to −3.32 eV and high-lying HOMO energy levels ranging from −5.26 to −5.62 eV, which indicated that they may be promising candidates for the fabrication of polymer light-emitting diodes. In addition, the copolymers showed good third-order non-linear optical properties.     

Synthesis and characterization of dithienobenzothiadiazole-based donor–acceptor conjugated polymers for organic solar cell applications

New donor–acceptor conjugated polymers (P1 and P2) containing a fused-ring dithienobenzothiadiazole (DT-BTD building block) were synthesized by using the Stille copolymerization method. The synthesized polymers were characterized by ¹H NMR, GPC, and elemental analysis. The optical band gaps of the polymers were found to be 1.86 and 1.9 eV, respectively, as calculated from their film onset absorption edge. Upon annealing both produced a distinct shoulder peak in their film absorption spectra. The electrochemical studies of P1 and P2 revealed that the HOMO and LUMO energy levels of the polymer were −5.3, −5.1 eV, and −3.4, −3.2 eV, respectively. The polymers are thermally stable up to 250–350 °C.     

Synthesis and photophysical properties of tetrafluorophenyl-modified carbazole oligomers

A series of tetrafluorophenyl-modified oligo(3,6-carbazole ethynylene)s (CfCzCf, CfCz2Cf, CfCz3Cf, (CfCz)2Cf, and Cf2CzCf2) were synthesized by a Pd/Cu-catalyzed Sonogashira coupling reaction and fully characterized. Their photophysical and electronic properties as well as their thermal stabilities were investigated. It is noteworthy that these tetrafluorophenyl modified compounds showed relative thermal stabilities and low-lying HOMO levels ranging from −5.54 to −5.60 eV, which might be the promising candidates for hole-transporting materials in OLEDs.     

Synthesis and electrochemical properties of new cobalt and manganese phthalocyanine complexes tetra-substituted with 3,4-(methylendioxy)-phenoxy

The synthesis and electrochemical properties of new cobalt and manganese phthalocyanine complexes, tetra-substituted with 3,4-(methylendioxy)-phenoxy at the peripheral (complexes 3 and 5) and non-peripheral (complexes 4 and 6) positions, are reported. Complexes 3 and 4 showed Q-band absorption, in DMF, at 668 and 686 nm, respectively while Q-band due to complexes 5 and 6 appeared at 732 and 760 nm, respectively in CHCl₃. All the complexes showed well resolved redox processes attributed to both metal and ring based processes. Complexes 3 and 4 showed four redox processes, labeled I, II, III and IV. For complex 3, process I (Co^IPc⁻²/Co^IPc⁻³) was observed at −1.45 V, II (Co^IIPc⁻²/Co^IPc⁻²) at −0.38 V, III (Co^IIIPc⁻²/Co^IIPc⁻²) at +0.49 V and IV (Co^IIIPc⁻¹/Co^IIIPc⁻²) at +0.97 V versus Ag|AgCl. Similar processes were observed for complex 4 at −1.36 V, −0.27 V, +0.56 V, +1.03 V versus Ag|AgCl, respectively. Complexes 5 and 6 showed two redox processes (I and II). For complex 5, these processes appeared at −0.79 V (Mn^IIPc⁻²/Mn^IIPc⁻³, I) and −0.07 V versus Ag|AgCl (Mn^IIIPc⁻²/Mn^IIPc⁻², II), while for complex 6, they were observed at −0.86 V and −0.04 V versus Ag|AgCl. Spectroelectrochemistry was used to probe and confirm the origin of these processes.     

Synthesis and dynamics of atropisomeric (S)-N-(α-phenylethyl)benzamides

The synthesis of atropisomeric 2-substituted benzamides 2a-e, 3a-e, and 4a-e, and characterization by X-ray structure analysis of 2d, 2e, 3c, 3e, 4c, and 4e are reported. Dynamic ¹H NMR spectroscopic studies of benzamides 2b-d, 3b-d, and 4b-d indicate that only two of the four possible rotamers are present in solution, with population ratios ranging between 1.5:1 and 4.1:1. The measured free energy of activation to interconversion of the rotamers ranged from 12.4 to 18.9 kcal mol⁻¹. Benzamides ArCON[(S)-phenethyl]₂ (2e, 3e, and 4e), exhibited atropisomer ratios between 1.7:1 and 1:1, and free energies of interconversion of the rotamers ranged from 11.5 to 17.6 kcal mol⁻¹. The highest rotation barriers were observed for the ortho-nitro derivatives 2a-e. Molecular calculations at the semiempirical level (PM3MM) gave free energies of activation for benzamides 2e and 3e of 23.6 and 12.4 kcal mol⁻¹, respectively, which are comparable to the experimental values.     

Pluri-dimensional hydrogen-bonded networks of novel thiophene-introduced oligo(imidazole)s and physical properties of their charge-transfer complexes with TCNQ

Novel π-extended oligo(imidazole)s composed of imidazole and thiophene ring systems, bis(imidazolyl)thiophenes 1-4, were synthesized as new building blocks for electron-donor molecules having diverse hydrogen-bonding directionalities in order to explore hydrogen-bonded charge-transfer complexes and supramolecular assemblies. The cyclic voltammetry of these compounds showed increase of electron-donating ability compared with those of 2,2′- and 4,4′-biimidazoles. In the crystal structure, 1, 2 and 3 exhibited multi-dimensional hydrogen-bonded networks via solvent molecules including the π-π interaction. Charge-transfer complexes of 1, 2 and 4 with TCNQ were characterized as partial charge-transfer complexes with segregated stacks. The compressed pellets of the TCNQ complex of 2 showed a high electrical conductivity (σ_rt=5.2×10⁻² S cm⁻¹) at room temperature with semiconducting behavior (activation energy, E_a=71 meV).     

Synthesis and properties of acceptor-donor-acceptor molecules based on oligothiophenes with tunable and low band gap

A series of acceptor-donor-acceptor molecules (DCN3T, DCN5T and DCN7T) based on oligothiophenes with low band gap are synthesized. The UV-vis absorption spectra of solution show that the introduction of electron-accepting groups results in a shift of the absorption onset towards longer wavelengths. Moreover, the optical spectra of their films show a large bathochromic shift and broadening of the bands with respect to the spectra in solution. The optical band gaps of film of these A-D-A molecules are 1.90, 1.74 and 1.68 eV, respectively. Cyclic voltammetry shows that all these compounds present a reversible first oxidation process whose potential decreases with the lengthening of oligothiophene cores. Electrochemical band gaps are 2.14, 1.88 and 1.71 eV, respectively.     

Multiple hydrogen-bond-induced supramolecular nanostructure from a pincer-like molecule and a [60]fullerene derivative

A new supramolecular self-assembled system between a perylene bisimide bearing diaminopyridine-substituted isophthalamide groups (PP) and a [60]fullerene containing barbituric acid moiety (C₆₀bar) through a complementary six-point hydrogen-bonding interaction was constructed. The formation of hydrogen bonding was confirmed by ¹H NMR spectra studies in CDCl₃. Fluorescence quenching experiments indicated that the fluorescence of PP was greatly quenched by the hydrogen-bonded C₆₀bar (K_sv=2.71×10⁴ M⁻¹). A steady and rapid cathodic 0.15 μA cm⁻² photocurrent response of the PP/C₆₀bar film deposited onto an ITO electrode was produced under the irradiation of 20 mW cm⁻² white light, indicating the presence of photo-induced electron transfer between PP and C₆₀bar. TEM images showed that spherical particles were fabricated by the self-assembly of PP and C₆₀bar through hydrogen-bonding interaction.     

Novel blue light-emitting hyperbranched polyfluorenes incorporating carbazole kinked structure

A novel series of soluble hyperbranched polyfluorenes P1−P6 with various branching degrees and contents of kinked carbazole units were successfully synthesized with good yields and high molecular weight via a facile “A2 + B2 + C3 + D2” approach. The thermal, optical, and electrochemical properties as well as thermal spectral stability of the resulting hypberbranched polymers were investigated. All polymers exhibited good thermal stabilities and bright blue emission in both solutions and solid-states. Hyperbranched polyfluorenes (P3 and P6) exhibited improved spectral stability upon annealing at 200 °C in air, in sharp contrast to the linear poly(9,9-dihexylfluorene) (PDHF) that showed significant additional green emission at ca. 530 nm within minutes. In particular, outstanding spectral stability was observed with carbazole-incorporating hyperbranched polyfluorene P6. Electrochemical characterization indicated that the presence of carbazole also effectively raised the HOMO level with respect to that of polyfluorene homopolymer, suggesting better hole-injection properties. Hence, the incorporation of kinked carbazole unit into hyperbranched polyfluorenes could provide a new methodology for preparing blue light-emitting polymers with improved optoelectronic characteristics.     

Heavy analogues of the 6π-electron anionic ring systems: Cyclopentadienide ion and cyclobutadiene dianion

The heavy analogues of the anionic 6π-electron systems, lithium 1,2-disila-3-germacyclopentadienide 2⁻ · [Li⁺(thf)], 1,2-disila-3,4-digerma- and 1,2,3,4-tetrasilacyclobutadiene dianions 7²⁻ · 2[K⁺(thf)₂] and 8²⁻ · 2[K⁺(thf)₂], were synthesized by the reduction of the neutral precursors 1, 3 and 4, respectively. 2⁻ · [Li⁺(thf)], the heavy analogue of the cyclopentadienide ion, is an aromatic compound, whereas 7²⁻ · 2[K⁺(thf)₂] and 8²⁻ · 2[K⁺(thf)₂], the heavy analogues of the cyclobutadiene dianion, are both non-aromatic.     

Synthesis, characterization and luminescence properties of copper(I) complexes containing 2-phenyl-3-(benzylamino)-1,2-dihydroquinazolin-4(3H)-one and triphenylphosphine as ligands

Some copper(I) complexes of the formula [Cu(L)(PPh₃)₂]X (1-4) [where L = 2-phenyl-3-(benzylamino)-1,2-dihydroquinazolin-4(3H)-one; PPh₃ = triphenylphosphine; X = Cl⁻, NO₃⁻, ClO₄⁻ and BF₄⁻] have been prepared and characterized on the basis of elemental analysis, IR, UV-Vis and ¹H NMR spectral studies. The representative complex of the series 4 has been characterized by single crystal X-ray diffraction which reveal that in the complex the central copper(I) ion assumes the irregular distorted-tetrahedral geometry. Cyclic voltammetry of the complexes indicate a quasireversible redox behavior corresponding to Cu(II)/Cu(I) couple. All the complexes exhibit intraligand (π → π^∗) fluorescence with high quantum yield in dichloromethane solution.     

Synthesis, characterization, and electroluminescent properties of star shaped donor-acceptor dendrimers with carbazole dendrons as peripheral branches and heterotriangulene as central core

Luminescent and redox-active heterotriangulene-based dendrimers (G1 and G2) of first and second generation have been synthesized, and their photophysical properties, oxidation behaviors, and applications in organic light emitting diodes (OLEDs) have been investigated. The dendrimers show efficient aggregation-induced emissions originated from the carbazole dendrons, heterotriangulene core, intramolecular charge-transfer (ICT), and intermolecular aggregation absorptions. Highest-occupied molecular orbital and lowest-unoccupied molecular orbital (HOMO and LUMO) values were acquired using UV-vis spectroscopy and cyclic voltammetry. The OLEDs fabricated with G1 and G2 as non-doping emitters exhibit exclusive aggregation-induced luminescence peaking at 600 and 630 nm, respectively, and demonstrate a good performance with maximum luminance of 1586 cd m⁻² at current efficiency of 5.3 cd A⁻¹ for G1 and 827 cd m⁻² at current efficiency of 6.9 cd A⁻¹ for G2.     

Dinitrogen extrusion from diazidophenylborane: Computational analysis of PhBNx (x = 6, 4, 2) isomers

The energies and structures of possible intermediates in the dinitrogen extrusion from diazidophenylborane 4a to give phenylborylene 11a were determined using density functional (B3LYP), multiconfigurational (CASSCF and MRMP2), and coupled cluster (CCSD(T)) computations in conjunction with basis sets of up to cc-pVTZ quality. Formation of 11a and nitrogen from 4a is an exothermic process (−21 kcal mol⁻¹). The triplet electronic ground state of azidophenylborylnitrene 5a (PhBN₄) is only 26 kcal mol⁻¹ higher in energy than 4a and the phenyl shift in 5a to yield N-azidophenyliminoborane 7a is highly exothermic.     

A highly selective and sensitive fluorescein-based chemodosimeter for Hg2+ ions in aqueous media

A new fluorescein-based chemodosimeter (II) for Hg²⁺ ion was designed and synthesized, and it displayed excellent selective and sensitive toward Hg²⁺ ion over other commonly metal ions in aqueous media. II was a colorless, non-fluorescent compound. Upon addition of Hg²⁺ to the solution of II, the thiosemicarbazide moiety of II would undergo an irreversible desulfurization reaction to form its corresponding oxadiazole (IV), a colorful and fluorescent product. During this process, the spirocyclic ring of II was opened, causing instantaneous development of visible color and strong fluorescence emission in the range of 500-600 nm. Based on the above mechanism, a fluorogenic Hg²⁺-selective chemodosimeter was developed. The fluorescence increase is linearly with Hg²⁺ concentration up to 1.0 μmol L⁻¹ with a detection limit of 8.5 × 10⁻¹⁰ mol L⁻¹ (3σ). Compared with the rhodamine-type chemodosimeter, II is more stable in aqueous media and exhibits higher sensitivity toward Hg²⁺. The findings suggest that II will serve as a practical chemodosimeter for rapid detection of Hg²⁺ concentrations in realistic media.     

Phenothiazine-based oligomers as novel fluorescence probes for detecting vapor-phase nitro compounds

To meet the need for rapid and low-cost chemical sensing of explosive, new fluorescence chemosensors based on oligophenothiazines for probing vapor-phase nitro compounds have been developed. The phenothiazine-based trimer P3 and pentamer P5 have been synthesized via Heck and Wittig reactions by convergent approach. It was found that they can detect the vapors of nitro compounds, including p-nitrotoluene (p-NT), 2,4-dinitrotoluene (DNT), 2,4,6-trinitrotoluene (TNT) with good sensitivity and reversibility. And the sensor of P3 film gave a linear fluorescence quenching response to 7-800 ppb TNT with the detection limit of 4 ppb. For DNT vapor, a linear working range of the sensor was 2-24 ppm with the detection limit of 40 ppb. Meanwhile, the interferents, including common organic solvents, p-nitrophenol and 2,4-dinitrophenylhydrazine cannot lead to obvious fluorescence quenching, meaning that the film based on oligophenothiazines exhibited good specificity of fluorescence response to explosive. Based on the fluorescence lifetime and UV-vis absorption measurements, we suggested that the fluorescence quenching of oligophenothiazine-based films exposed to the vapors of nitro compounds was due to the formation of non-fluorescent charge-transfer complex between oligophenothiazine and nitro compounds.     

Cobalt complexes of terpyridine ligands: Crystal structure and nuclease activity

Cobalt(II) (1) and cobalt(III) (2) complexes of tridentate ligand, imidazole terpyridine (Itpy), have been synthesized and characterized by both spectroscopic and electrochemical techniques. Single crystal X-ray diffraction studies of complexes 1 and 2 shows that the complexes belong to monoclinic crystal system, with the two Itpy ligands coordinated to the central metal ion. The binding behavior of both the cobalt complexes to calf thymus DNA has been investigated by UV–Vis, fluorescence spectroscopy, viscosity and electrochemical measurements. The results suggest that complexes 1 and 2 bind to DNA through intercalation. The intrinsic DNA binding constant values obtained from absorption spectral titration studies were found to be (5.07 ± 0.12) × 10³ M⁻¹ and (7.46 ± 0.16) × 10³ M⁻¹, respectively, for complexes 1 and 2. Gel electrophoresis studies with the cobalt complexes show that while complex 1 cleaves DNA in the presence of hydrogen peroxide, complex 2 cleaves DNA in the presence of ascorbic acid and hydrogen peroxide.     

New star-shaped triarylamines: synthesis, mesomorphic behavior, and photophysical properties

A total of 18 compounds 1-6 derived from triphenylamine as core group were prepared and characterized, and their mesomorphic properties were also investigated. Compounds 1-4 and 5,6 were prepared from p,p′,p″-triformyltriphenylamine and p,p′-diformyltriphenylamine with appropriate alkoxyphenylamines. The phase behavior of these mesogenic compounds was characterized and studied by differential scanning calorimetry, polarized optical microscopy, and powder XRD diffraction. Compounds 1-3 exhibited columnar mesophase, however, compounds 4-6 were nonmesogenic. The mesophases observed in compounds 1-3 were found to be side dependent. Compounds 1a, 2a, and 3a appended with one, two, or three side chains exhibited lamellar columnar (Col_L) phases, and compounds 2b and 3b with four or six side chains formed hexagonal columnar (Col_h) phases. The formation of the mesophases, lamellar or columnar mesophases, was probably induced by H-bonding formed between -CH₂NH groups. The oxidation process determined by cyclic voltammetry showed two redox waves, one appeared at 220-255 mV and the other one at 503-677 mV, which gave energy to HOMOs range of 5.02-5.36 eV. The fluorescent properties of the compounds were examined. All λ_max peaks of the absorption and photoluminescence spectra of compounds occurred at ca. 307-392 nm and 368-456 nm, respectively. Compound 4a has a larger red shift due to a better conjugation linked by CC double bonds instead of -CH₂NH in other compounds.     

Non-degenerate 1,2-silyl shift in silyl substituted alkyltrimethylcyclopentadienes

The five new silanes C₅Me₃RSiMe_nCl_3 − n (n = 3, R = i-Pr (5); n = 2, R = i-Pr (6); n = 2, R = s-Bu (7); n = 2, R = cyclohexyl (8); and n = 3, R = t-Bu (9)) were synthesized by reaction of 1-alkyl-2,3,4-trimethylcyclopentadienyl lithium salts with appropriate chlorosilane and characterized by NMR, MS, and IR spectra. At elevated temperatures (250-360 K), all the silanes undergo a non-degenerate sigmatropic silyl rearrangement, which generates non-equivalent structures a and b. The presence of minor structure c was observed in compounds 5 and 7 only. The Diels-Alder cycloaddition of 5 with strong dienophiles tetracyanoethylene (TCNE), and dimethylacetylenedicarboxylate (DMAD) provides compounds 10 and 11, which confirmed isomers a and b, respectively. The free energy of activation of b → a isomerization for compounds 5-8 evaluated from variable temperature NMR spectra show only marginal influence of group R on the 1,2-silyl shift rate. Moreover, in compounds 5 and 7, the process b → a was found significantly faster than b → c process in the above-mentioned temperature range.     

Inner-assembly singlet energy transfer in naphthalene-anthracene system linked by 2-ureido-4{1H}-pyrimidinone binding module

Naphthalene-naphthalene, anthracene-anthracene, and naphthalene-anthracene assemblies 1.1, 2.2, and 1.2 linked by 2-ureido-4{1H}-pyrimidinone binding module were synthesized. Fluorescence quenching and lifetime measurements demonstrate that the inner-assembly singlet energy transfer from naphthalene to anthracene in 1.2 occurs with the efficiency of ca. 89% and rate constant of ca. 9.8 × 10⁸ s⁻¹. Föster energy transfer mechanism operates in this energy transfer process.     

Novel 2,7-substituted pyrene derivatives: syntheses, solid-state structures, and properties

A novel series of pyrene derivatives 3-6 functionalized with different aromatic substituents at 2,7-positions of the pyrene core have been readily synthesized by Suzuki coupling reactions. Single crystals suitable for X-ray crystallographic analysis of compounds 3-6 were all successfully obtained. The optical, electrochemical, and thermal properties of these newly synthesized compounds were thoroughly investigated and discussed. Theoretical calculation was adopted to study the geometric and electronic structure of compounds 3-6. Additionally, preliminary studies demonstrated that field-effect transistors using compound 3, 5, and 6 performed as p-type semiconductors, in which a field-effect mobility as high as 0.018 cm² V⁻¹ s⁻¹ and current on/off ratio of 10⁶ were achieved from compound 6.