Synthesis and characterization of a biodegradable amphiphilic copolymer based on branched poly(ϵ‐caprolactone) and poly(ethylene glycol)

A novel biodegradable amphiphilic copolymer with hydrophobic poly(ε‐caprolactone) branches containing cholic acid moiety and a hydrophilic poly(ethylene glycol) chain was synthesized. The copolymer was characterized by FTIR, ¹H NMR, gel permeation chromatography (GPC), differential scanning calorimetry (DSC), polarizing light microscopy (PLM), and wide‐angle X‐ray diffraction (WAXD) analysis. The amphiphilic copolymer could self‐assemble into micelles in an aqueous solution. The critical micelle concentration of the amphiphilic copolymer was determined by fluorescence spectroscopy. A nanoparticle drug delivery system with a regularly spherical shape was prepared with high encapsulation efficiency. The in vitro drug release from the drug‐loaded polymeric nanoparticles was investigated. Because of the branched structure of the hydrophobic part of the copolymer and the relatively fast degradation rate of the copolymer, an improved release behavior was observed. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5256–5265, 2007     

Preparation and characterization of metronidazole‐loaded chitosan nanoparticles for drug delivery application

This study describes the preparation of mucoadhesive chitosan nanoparticles containing metronidazole (MZ) intended for colon‐specific delivery. The chitosan nanoparticles were prepared by the ionic gelation method and their in vitro properties were studied. The release profiles of MZ from the nanoparticles were determined by UV–Vis absorption measurement at λ_max 278 nm. Scanning electron microscopy was used for morphology observation. The nanoparticles exhibited mucoadhesive properties, which diminished with increasing drug content. The nanoparticles with a particle size range between 200 and 300 nm exhibited excellent mucoadhesive properties. The results show that the formulated nanoparticles have succeeded in controlling the release of MZ over a 12‐hr period. In conclusion, the release of MZ was found to be dependent upon the composition of the nanoparticles, the ratio of the components and possible particle size, as well as bioadhesive ability. Copyright © 2008 John Wiley & Sons, Ltd.     

Thermosensitive and control release behavior of poly(N-isopropylacrylamide-co-acrylic acid)/nano-Fe3O4 magnetic composite latex particle that is synthesized by a novel method

In this study, a novel method was used to synthesize the poly(N-isopropylacrylamide-co-acrylic acid)/Fe₃O₄ (poly(NIPAAm-AA)/Fe₃O₄) magnetic composite latex. The crosslinked poly(NIPAAm-AA) polymer latex particles were first synthesized by the method of soapless emulsion polymerization, then Fe²⁺ and Fe³⁺ ions were introduced to bond with the -COOH groups of AA segments in poly(NIPAAm-AA) polymer latex particles. Further by a reaction with NH₄OH, Fe₃O₄ nanoparticles were generated in situ. The concentrations of acrylic acid (AA), crosslinking agent (N,N′-methylene bisacrylamide (MBA)), and Fe₃O₄ nanoparticles were important factors to influence the morphology and lower critical solution temperature (LCST) of poly(NIPAAm-AA)/Fe₃O₄ magnetic composite latex particles. The poly(NIPAAm-AA)/Fe₃O₄ latex particles were used as a thermosensitive drug carrier to load caffeine. The control release of caffeine was studies. Morphology-based schematic models were proposed to explain the control release behavior of the composite particles with different compositions. Moreover, the protein (albumin, acetylated from bovine serum (BSA)) was bound on the surface of poly(NIPAAm-AA)/Fe₃O₄ composite latex particles. The effects of AA, crosslinking agent and Fe₃O₄ contents on the amount of BSA binding were investigated at different temperatures and pH values. The composition-morphology-BSA conjugation relationship was established.     

Adsorption of acid and basic dyes on NiO-SiO2 composites

A series of composites containing 2.5–21.0% NiO on a surface of macroporous silica is synthesized. The specific surface area of the composites measured by the thermal desorption of nitrogen decreases with an increase in the NiO content from 24 for the original silica carrier to 16 m²/g the for composite containing 21.0% NiO. The basic dye, methylene blue (MB), is only adsorbed on SiO₂ in water solutions, while acid blue anthraquinone (ABA) is only adsorbed on the NiO. The effective specific surface area Seff and effective diameters D _eff of NiO nanoparticles are calculated from the adsorption isotherms of ABA on NiO composites and on NiO synthesized without a carrier. S _eff of NiO nanoparticles decreases from 76 to 42 m²/g and D _eff increases from 8 to 14 nm with rising NiO content in the composites. The NiO nanoparticles synthesized without a carrier are characterized by the lowest S _eff (30 m²/g) and the largest D _eff (20 nm).     

New restricted access materials combined to molecularly imprinted polymers for selective recognition/release in water media

A new restricted access materials combined to molecularly imprinted polymers (RAM-MIP) with hydrophilic external layer were prepared and their applicability in p-acetaminophenol (AMP) selective recognition and release was evaluated. Glycidilmethacrylate (GMA) was used as pro-hydrophilic co-monomer, and GMA epoxide ring opening with perchloric acid was performed for the hydrophilic modification of polymeric surface. Morphological and hydrophilic properties by scanning electron microscopy and water content measurement were determined and recognition and selectivity properties of RAM-MIP were compared to the unmodified MIP. With RAM-MIP, both hydrophobic non-specific interactions between template or its analogues and polymeric matrices, and bovine serum albumin absorption were drastically reduced.     

Triclosan-loaded with high encapsulation efficiency into PLA nanoparticles coated with β-cyclodextrin polymer

The purpose was to prepare triclosan-loaded polylactic acid nanoparticles containing β-cyclodextrin polymer shell, evaluate triclosan release from the particles using Franz diffusion cells and to study the stability of the particles in presence of a model protein, bovine serum albumin. The nanoparticles were prepared by a solvent displacement process. The nanoparticles were characterized by their size, encapsulation efficiency and morphology. They were of spherical shape with hydrodynamic diameter of about 100 or 200 nm depending on the polylactic acid used. Their high encapsulation efficiency (~90%) indicated that triclosan is easily incorporated into the nanoparticles. The nanoparticles displayed slow and sustained triclosan release patterns (diffusion coefficient about 10^?22 m²/s) and the β-cyclodextrin polymer coating was stable under simulated physiological conditions. All these data indicated that these novel core–shell nanoparticles might provide a promising carrier system for controlled release of triclosan and other hydrophobic drugs after systemic administration.     

Synthesis,characterization and antibacterial properties of a novel nanocomposite based on polyaniline/polyvinyl alcohol/Ag

In this study, a novel nanocomposite based on polyaniline/polyvinyl alcohol/Ag (PANI/PVA/Ag) has been successfully synthesized. The chemical reduction method was used to produce Ag nanoparticle colloidal solution from Ag⁺ ions. The polymerization of aniline occurred in situ for the preparation of polyaniline (PANI) in the presence of ammonium persulfate. With exposure to Ag nanoparticles on the PANI/PVA composite, a new nanocomposite was obtained. The morphology and particle size of the novel nanocomposite was studied by scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier transform infrared (FT-IR) analyses. According to XRD analysis, the size of nanoparticles was found to be in the range of 10–17 nm. SEM images showed the favored shape of nanoparticles as triangle which is a benign shape for antibacterial analysis. The antibacterial activity of the obtained nanocomposite was also evaluated against Gram positive bacteria Staphylococcus aureus (Staph. aureus) and Gram negative Escherichia coli (E. coli) using the paper disk diffusion method. The antibacterial study showed that the PANI/PVA composite did not have a very good antibacterial activity but PANI/PVA/Ag nanocomposites were found to be effective against two bacteria.     

Sustained release applications of a fluoroalkyl ester-functionalized amphiphilic cyclodextrin by inclusion complex formation with water-soluble drugs in supercritical carbon dioxide

An amphiphilic γ-cyclodextrin, selectively functionalized with perfluorobutanoyl group, octakis(6-O-perfluorobutanoyl)-γ-cyclodextrin (γ-CyD-F), was investigated as a potential sustained release carrier for hydrophilic drugs, taking molsidomine (MOL) as a model drug. Supercritical carbon dioxide, an environmentally benign solvent, was used for the preparation of MOL/γ-CyD-F inclusion complexes. The molecular encapsulation of MOL by the amphiphilic cyclodextrin was confirmed by differential scanning calorimetry (DSC) and powder X-ray diffraction (XRD) studies. Additionally, ¹H NMR spectroscopy was used to investigate the inclusion mode of drug with the γ-CyD-F. The in-vitro release of MOL from the peanut oil suspensions into aqueous phase was found to be significantly retarded by the complexation with γ-CyD-F, mainly due to the hydrophobic properties associated with the γ-CyD-F.     

Optimization of profenofos organophosphorus pesticide degradation by zero-valent bimetallic nanoparticles using response surface methodology

This study synthesized bimetallic Fe/Ni nanoparticles and used them for catalytic degradation of profenofos, an organophosphorus pesticide. This novel bimetallic catalyst (Fe/Ni) was characterized by scanning electron microscopy (SEM), energy-dispersive X-ray analysis spectroscopy (EDAX) and X-ray diffraction (XRD). The bimetallic nano-catalyst was prepared at diameters of 20–50 nm and was shown to effectively degrade profenofos. A three-factor central composite design combined with response surface methodology was used to maximize profenofos removal using the bimetallic system. A quadratic model was built to predict degradation efficiency. ANOVA was used to determine the significance of the variables and interactions between them. Good correlation between the experimental and predicted values was confirmed by the high F-value (16.38), very low P-value (<0.0001), non-significant lack of fit, an appropriate coefficient of determination (R² = 0.936) and adequate precision (14.75). The highest removal rate attained was 94.51%.     

Self-aggregated nanoparticles of cholesterol-modified glycol chitosan conjugate: Preparation, characterization, and preliminary assessment as a new drug delivery carrier

Cholesterol-modified glycol chitosan (CHGC) conjugate was synthesized and characterized by FTIR and ¹H NMR. The degree of substitution (DS) was 6.7 cholesterol groups per 100 sugar residues of glycol chitosan. CHGC formed self-aggregated nanoparticles with a roughly spherical shape and a mean diameter of 228 nm by probe sonication in aqueous medium. The physicochemical properties of the self-aggregated nanoparticles were studied using dynamic light scattering (DLS), transmission electron microscopy (TEM) and fluorescence spectroscopy. The critical aggregation concentration (CAC) of self-aggregated nanoparticles in aqueous solution was 0.1223 mg/mL. Indomethacin (IND), as a model drug, was physically entrapped into the CHGC nanoparticles by dialysis method. The characteristics of IND-loaded CHGC (IND-CHGC) nanoparticles was analyzed using DLS, TEM and high performance liquid chromatography (HPLC). The IND-CHGC nanoparticles were almost spherical in shape and their size increased from 275 to 384 nm with the IND-loading content increasing from 7.14% to 16.2%. The in vitro release behavior of IND from CHGC nanoparticles was studied by a dialysis method in phosphate buffered saline (PBS, pH 7.4). IND was released in a biphasic way. The initial rapid release in 2 h and slower release for up to 12 h were observed. The results indicated that CHGC nanoparticles had a potential as a drug delivery carrier.     

Bimetallic Cu–Pt/nanoporous carbon composite as an efficient catalyst for methanol oxidation

A novel bimetallic Cu–Pt nanoparticle supported onto Cu/indirectly carbonized nanoporous carbon composite (Cu–Pt/ICNPCC) was prepared through a two-step process: first, carbonization of furfuryl alcohol-infiltrated MOF-199 [metal–organic framework Cu₃(BTC)₂ (BTC?=?1,3,5-benzene tricarboxylate)], without removing the Cu metal with HF aqueous solution; second, the partial galvanic replacement reaction (GRR) of Cu nanoparticles by Pt^IV upon immersion in a platinum(IV) chloride solution. The synthesized materials characterized by powder X-ray diffraction, Fourier transform infrared spectroscopy, field-emission scanning electron microscopy, energy-dispersive X-ray spectroscopy (EDS), and electrochemical methods. The EDS result revealed that part of Cu nanoparticles have been substituted by Pt nanoparticles after GRR. The methanol oxidation at the surface of Cu–Pt/ICNPCC was investigated by cyclic voltammetry method in 0.5 M H₂SO₄ and indicated good electro-catalytic activity towards methanol oxidation (E_p?=?0.85 V vs. NHE and j_f?=?1.00 mA cm^?2). It is suggested that this improvement is attributed to the effect of proper Cu/ICNPCC for fine dispersion, efficient adhesion, and prevention of Pt coalescing.     

Drug release behaviors of a pH/thermo-responsive porous hydrogel from poly(N-acryloylglycinate) and sodium alginate

A pH/thermo-responsive hydrogel with porous structure (HME), composed of poly(N-acryloylglycine methyl ester), poly(N-acryloylglycine ethyl ester) and sodium alginate (SA) was prepared for the controllable drug carrier. The resultants, CO₂ and CaCl₂ from the reaction of CaCO₃ particles and HCl act as pore-forming and crosslinking of SA, respectively. The porous HME was characterized by differential scanning calorimetry, scanning electron microscopy (SEM), Fourier transform infrared spectroscopy and surface area and porosity analysis. The sheet, porous structure was clearly observed by the SEM measurement and the specific surface area of HME was evidently increased with an increase of CaCO₃ content. At pH 2.1 phosphate buffered saline (PBS), the release amount of caffeine at room temperature was only 7.2 % within 600 min, while this value approached to 65.3 % at pH 7.4 PBS. Additionally, the cumulative release at 37 °C is much higher than that at room temperature due to the thermo-sensitivity of HME. The experimental results indicated that porous HME has a potential to be used as the promising release-controlled drug carrier in the biomedical fields.     

Thermoresponsive Copolymer/SiO2 Nanoparticles with Dual Functions of Thermally Controlled Drug Release and Simultaneous Carrier Decomposition

The preparation of thermoresponsive drug carriers with a self‐destruction property is presented. These drug carriers were fabricated by incorporation of drug molecules and thermoresponsive copolymer, poly(N‐isopropylacrylamide‐co‐acrylamide), into silica nanoparticles in a one‐pot preparation process. The enhanced drug release was primarily attributed to faster molecule diffusion resulting from the particle decomposition triggered by phase transformation of the copolymer upon the temperature change. The decomposition of the drug carriers into small fragments should benefit their fast excretion from the body. In addition, the resulting drug‐loaded nanoparticles showed faster drug release in an acidic environment (pH 5) than in a neutral one. The controlled drug release of methylene blue and doxorubicin hydrochloride and the self‐decomposition of the drug carriers were successfully characterized by using TEM, UV/Vis spectroscopy, and confocal microscopy. Together with the nontoxicity and excellent biocompatibility of the copolymer/SiO₂ composite, the features of controlled drug release and simultaneous carrier self‐destruction provided a promising opportunity for designing various novel drug‐delivery systems.     

Biodegradable polyester/modified mesoporous silica composites for effective bone repair with self‐reinforced properties

A series novel composites based on poly(_L‐lactide) (PLLA) oligomer modified mesoporous silica (MCM41) homogeneous dispersed into poly(_L‐lactide‐co‐trimethylene carbonate‐co‐glycolide) (PLTG) terpolymer has been successfully prepared. The structure of PLTG terpolymer was characterized by ¹H NMR. The structure and properties of modified and unmodified MCM41 were attested by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analyzer (TGA), X‐ray diffraction (XRD), N₂ adsorption–desorption, scanning electron microscope (SEM), and transmission electron microscope (TEM), which demonstrated that the MCM41 was successfully grafted by the PLLA oligomer. The effect of different concentration of modified MCM41 in PLTG matrix on thermal properties, mechanical properties, and hydrophilicity was investigated by TGA, differential scanning calorimetry (DSC), mechanical testing, contact angle measurement, and SEM. The results of mechanical tests showed that 5 wt% of modified MCM41 nanoparticles gave rise to optimal reinforcing effect. The tensile strength, Young's modulus, and elongation at break of the PLTG/PLLA‐MCM41 (5%) composites were 33.2 Mpa, 1.58 Gpa, and 268.7%, respectively, which were all higher than the PLTG/MCM41 (5%) composites and pristine PLTG matrix, which were due to good interfacial adhesion between the PLTG matrix and MCM41 nanoparticles. TGA and DSC have shown that 5% modified MCM41 in the PLTG increased the temperature of composite degradation and T_g. Water contact angle measurement showed the hydrophilicity of the composites increases with the increase of modified MCM41 content. The live/dead assay showed that the modified MCM41 existing on the PLTG matrix presents very excellent cytocompatibility. Therefore, the novel composite material represents promising way for bone tissue engineering application.     

Mesoporous silica nanoparticles for 19F magnetic resonance imaging,fluorescence imaging,and drug delivery

Multifunctional mesoporous silica nanoparticles (MSNs) are good candidates for multimodal applications in drug delivery, bioimaging, and cell targeting. In particular, controlled release of drugs from MSN pores constitutes one of the superior features of MSNs. In this study, a novel drug delivery carrier based on MSNs, which encapsulated highly sensitive ¹⁹F magnetic resonance imaging (MRI) contrast agents inside MSNs, was developed. The nanoparticles were labeled with fluorescent dyes and functionalized with small molecule-based ligands for active targeting. This drug delivery system facilitated the monitoring of the biodistribution of the drug carrier by dual modal imaging (NIR/¹⁹F MRI). Furthermore, we demonstrated targeted drug delivery and cellular imaging by the conjugation of nanoparticles with folic acid. An anticancer drug (doxorubicin, DOX) was loaded in the pores of folate-functionalized MSNs for intracellular drug delivery. The release rates of DOX from the nanoparticles increased under acidic conditions, and were favorable for controlled drug release to cancer cells. Our results suggested that MSNs may serve as promising ¹⁹F MRI-traceable drug carriers for application in cancer therapy and bio-imaging.     

Bioreducible unimolecular micelles based on amphiphilic multiarm hyperbranched copolymers for triggered drug release

A novel type of bioreducible amphiphilic multiarm hyperbranched copolymer (H40-star-PLA-SS-PEG) based on Boltorn® H40 core, poly(l-lactide) (PLA) inner-shell, and poly(ethylene glycol) (PEG) outer-shell with disulfide-linkages between the hydrophobic and hydrophilic moieties was developed as unimolecular micelles for controlled drug release triggered by reduction. The obtained H40-star-PLA-SS-PEG was characterized in detail by nuclear magnetic resonance (NMR), Fourier transform infrared (FTIR), gel permeation chromatography (GPC), differential scanning calorimeter (DSC), and thermal gravimetric analysis (TGA). Transmission electron microscopy (TEM) and dynamic light scattering (DLS) analyses suggested that H40-star-PLA-SS-PEG formed stable unimolecular micelles in aqueous solution with an average diameter of 19 nm. Interestingly, these micelles aggregated into large particles rapidly in response to 10 mM dithiothreitol (DTT), most likely due to shedding of the hydrophilic PEG outer-shell through reductive cleavage of the disulfide bonds. As a hydrophobic anticancer model drug, doxorubicin (DOX) was encapsulated into these reductive unimolecular micelles. In vitro release studies revealed that under the reduction-stimulus, the detachment of PEG outer-shell in DOX-loaded micelles resulted in a rapid drug release. Flow cytometry and confocal laser scanning microscopy (CLSM) measurements indicated that these DOX-loaded micelles were easily internalized by living cells. Methyl tetrazolium (MTT) assay demonstrated a markedly enhanced drug efficacy of DOX-loaded H40-star-PLA-SS-PEG micelles as compared to free DOX. All of these results show that these bioreducible unimolecular micelles are promising carriers for the triggered intracellular delivery of hydrophobic anticancer drugs.     

Hydrophilic nanofiltration membranes with self-polymerized and strongly-adhered polydopamine as separating layer

Inspired by the self-polymerization and strong adhesion characteristics of dopamine in aqueous conditions,a novel hydrophilic nanofiltration（NF） membrane was fabricated by simply dipping polysulfone（PSf） ultrafiltration（UF） substrate in dopamine solution.The changes in surface chemical composition and morphology of membranes were determined by Fourier transform infrared spectroscopy（FTIR-ATR）,X-ray photoelectron spectroscopy（XPS）,scanning electron microscopy（SEM） and atomic force microscopy（AFM）.The experimental results indicated that the self-polymerized dopamine formed an ultrathin and defect-free barrier layer on the PSf UF membrane.The surface hydrophilicity of membranes was evaluated through water contact angle measurements.It was found that membrane hydrophilicity was significantly improved after coating a polydopamine（pDA） layer,especially after double coating.The dyes filtration experiments showed that the double-coated membranes were able to reject completely the dyes of brilliant blue,congo red and methyl orange with a pure water flux of 83.7 L/（m²·h） under 0.6 MPa.The zeta potential determination revealed the positively-charged characteristics of PSf/pDA composite membrane in NF process.The salt rejection of the membranes was characterized by 0.01 mmol/L of salts filtration experiment.It was demonstrated that the salts rejections followed the sequence:NaCl2SO₄422,and the rejection to CaCl₂ reached 68.7%.Moreover,the composite NF membranes showed a good stability in water-phase filtration process.     

Materials design and sensing mechanism of novel calix[6]arene composite for sensitively detecting amine drugs

In order to improve the convenience and sensitivity of amphetamines drug testing and reduce the threat of drugs to humans, we have designed a QCM gas sensor to detect amine-containing drugs. The sensing material is designed based on the chemical nature of amine drugs. The sensing mechanism is derived from a reversible Schiff base interaction between the amino group of the drug and the carbonyl group of the novel calix[6]arene derivatives as well as the hydrogen bond interaction between amino group and hydroxyl. The new composite material was well characterized by different analytical techniques including ¹H nuclear magnetic resonance (¹H-NMR), fourier transform infrared spectroscopy (FT-IR), scanning electronic microscopy (SEM), transmission electron microscope (TEM), Raman spectra, powder X-ray diffraction, etc. The sensing experiments were conducted by coating the composite onto quartz crystal microbalance (QCM) transducers. The experimental results indicated that the novel calixarene derivatives and their GO complexes based on the design have excellent selectivity, high sensitivity and repeatability to β-phenylethylamine.     

Green Composite Based on Silver Nanoparticles Supported on Diatomaceous Earth: Kinetic Adsorption Models and Antibacterial Effect

A green synthesis of composite based on silver nanoparticles (AgNPs) obtained by Melissa officinalis (MO) extract and supported on diatomaceous earth (DE) was synthesized. Kinetic adsorption models were proposed to describe the sorption mechanism of AgNPs nanoparticles during the impregnation process. Theoretical models as pseudo first order, pseudo-second order, Elovich and intraparticle diffusion were developed to establish accurately the kinetic parameters, such as correlations factors (R²) and maximum Ag nanoparticles sorption capacity of the diatomite. According to the Kinetic adsorption parameters obtained, the pseudo-second order model reveals the best linear fit. Also, four types of pseudo-second order model were performed and analyzed. The proposed models describe with great precision, the adsorption mechanism of Ag nanoparticles during the impregnation process onto DE surface. Complementary, the antibacterial activity of the composite against Staphylococcus aureus and Escherichia coli were evaluated. The green composite (Ag nanoparticles/diatomaceous earth) was characterized by Electron Microscopy, X-Ray Diffraction and Infrared Spectroscopy.     

Pb(II) removal from aqueous solution by polyacrylic acid stabilized zero-valent iron nanoparticles: process optimization using response surface methodology

Optimization and modeling of Pb(II) removal using polyacrylic acid stabilized zero-valent iron nanoparticles (PAA-ZVINs) from aqueous solution was performed. Central composite design (CCD) as the most applicable method in response surface methodology (RSM) was employed for optimization of Pb(II) removal. ZVINs were synthesized using the borohydride reduction method in the presence of PAA as a stabilizer and characterized via scanning electron microscopy (SEM) and X-ray diffraction (XRD). The independent variables for CCD optimization of Pb(II) removal were initial solution pH, ZVINs concentration (g/L), and initial concentration of Pb(II) (mg/L). Results showed a significant correlation between predicted values obtained from second-order polynomial model and experimental values (R ² = 93.19 and adj-R ² = 87.07). Maximum removal of Pb(II) (90.09 %) was observed at the optimal conditions of ZVINs concentration of 3 g/L, initial Pb(II) concentration of 10 mg/L, and initial solution pH of 5.