Study of electrical and dielectric properties of styrene-acrylonitrile/graphite sheets composites

This paper reports the structural, electrical, dielectric and mechanical properties of the Styrene-acrylonitrile (SAN)/graphite sheets (GS) composites. The composites were prepared by in situ polymerization. The variation of electrical conductivity, dielectric constant and ac conductivity as a function of volume fraction of GS was found to follow the power law model. The dielectric constant and dissipation factor of SAN/GS composites increased significantly near the percolation. The frequency dependence of dielectric constant, dissipation factor and ac conductivity was also analyzed. Nearly ohmic behavior of current density with electric field was observed above the percolation threshold. The composite was found to possess the hardness of pure polymer at the threshold value of GS.     

Insulator conductor transition in low-density polyethylene-graphite composites

The present paper reports the electrical conductivity of graphite filled low-density polyethylene composite in a broad range of composition. The observed non-percolation insulator conductor transition could well be explained in terms of the random resistor network of Miller and Abrahams model by considering the concentration of sites and size of the filler particle. The variation of the dielectric constant and dissipation factor has also been investigated. The dielectric constant and dissipation factor of low-density polyethylene-graphite composite increase with the increase in graphite volume fraction and significant changes were observed near the transition region. High values of dielectric constant and dissipation factor were observed in the low frequency region due to the Maxwell-Wagner interfacial polarization. A non-linear to linear variation of current density with electric field has been observed as the polymer composite transform to conducting region.     

Stability of new electrostatic discharge protection and electromagnetic wave shielding effectiveness from poly(vinyl chloride)/graphite/nickel nanoconducting composites

Poly(vinyl Chloride)/graphite nanosheet/nickel (PVC/GN) nancomposites are new alternative candidates for electrostatic charge dissipation and electromagnetic interference shielding applications due to their lightweight, ease processing and tunable conductivities. The structures of the nanocomposites were examined by means of scanning electron microscopy (SEM) and X-ray analysis. The mechanical properties such as hardness, modulus of elasticity and elongation at break as a function of GN content were examined. The applicability of the nanocomposites as electrostatic charge dissipation was tested in terms of displaying the variation of decay voltage with time. In addition, the dielectric properties such as real and imaginary permittivity of composites as functions of frequency were investigated. Finally, the electromagnetic properties were measured in the frequency range from 1 to 12 GHz and compared with theoretical modeling. The highest shielding effectiveness at microwave frequency of these nanocomposites was 47 dB which is realistic for defense applications like radar evasion.     

Thermodynamic properties of liquid Au-Cu-Sn alloys determined from electromotive force measurements

A thermally conductive linear low-density polyethylene (LLDPE) composite with aluminum nitride (AlN) as filler was prepared in a heat press molding. Differential scanning calorimeter results indicated that the AlN filler decreases the degree of crystallinity of LLDPE, and has no obvious influence on the melting temperature of LLDPE. Experimental results demonstrated that the LLDPE composites display a high thermal conductivity of 1.25 W/m K and improved thermal stability at 70 wt% AlN content as compared to pure LLDPE. The dielectric constant and dissipation factor increased with AlN content, however, they still remained at relatively low levels, i.e., <5 in wider frequency range from 10 to 10⁶ Hz. The surface treatment of AlN particles had a beneficial effect on improving the thermal conductivity and dielectric constant, whereas, the dissipation factor was less affected. Additionally, the obtained AlN/LLDPE composites have possessed rather low dielectric constant and high electrical insulation, which is suitable for substrate and packaging materials.     

颗粒填充聚合物高介电复合材料

颗粒填充聚合物高介电复合材料兼具聚合物材料的易加工、低损耗、耐击穿性能和陶瓷材料的高介电等性能,还可使金属材料具备介电性能,可以广泛应用于电气、电子行业。本文综述了非均匀体系介电理论研究的历史背景,以及陶瓷、金属颗粒填充聚合物高介电复合材料的组成、制备及介电性能的影响因素,并着重讨论了界面相在复合材料研究中的重要性,最后展望了发展方向。     

Highly improved dielectric behaviour of ferronematic nanocomposite for display application

We report the investigation of influence of nickel zinc ferrite magnetic nanoparticles (NZFO (Ni_0.5Zn_0.5Fe₂O₄)) on phase transition, optical and dielectric properties in a nematic liquid crystal (NLC). The interaction of NZFO nanoparticles with NLC was confirmed by the formation of ferronematic droplets due to the transfer of magnetic orientational effect onto the underlying NLC matrix. The doping results in shift of nematic to isotropic transition to low-temperature region. An enhancement in the value of refractive index is observed in the nematic region after the addition of NZFO nanoparticles. The dielectric constant of NLC was remarkably enhanced by 10 times after doping, which is found to be maximum at 0.1 wt% concentration of NZFO nanoparticles. The decrease in the value of dissipation factor in low-frequency region shows that the magnetic nanoparticles are able to trap ionic impurities effectively. The obtained results suggest that the optimum amount of doping concentration is 0.1 wt% of NZFO nanoparticles in NLC due to high dielectric constant with low dissipation factor and high refractive index with high dispersive power at room temperature.     

The acquirement of desirable dielectric properties of carbon nanofiber composites based on the controlled crystallization

This study focused on uncovering the relationship among nanofiller, crystallization behavior, and dielectric property of polymer composites. The effects of carbon nanofibers (CNFs) and heat treatment on the crystalline structures and dielectric properties of the semi‐crystalline polymers were analyzed by using high density polyethylene (HDPE) as a matrix, which is a representative of non‐polar polymer and contains only one crystal structure. The experimental results showed that the degree of crystallinity, size distribution of crystallity, and relative amount of different crystal planes in the HDPE matrix were changing due to the addition of CNFs. With the increase of CNF loading, the dielectric constant, dielectric loss and AC conductivity of the HDPE composites were increased, presenting a typical percolation characteristic, and the dependence of the dielectric constant on frequency became more obvious. All kinds of electronic transmission, polarization effect, and relaxation behaviors in CNF/HDPE composite system were deeply analyzed. After heat treatment, the degree of crystallinity of HDPE composites was decreased with the enhanced cooling rate. For the CNF/HDPE composites with nanofiller content slightly higher than the percolation threshold, the significant increase of the dielectric constant and the dramatical reduction of the dielectric loss over a wide frequency range were realized simultaneously through rapid cooling treatment. The research indicated that a general commercial polymer material with excellent dielectric properties, which exhibited a high dielectric constant and a low dielectric loss, can be obtained by a simple technical approach different from traditional fabrication method of threshold composites.     

Polyamide-11/lead zirconate titanates—a novel composite material with high dielectric properties

Polymeric composites gain increasing interest in materials research and practice applications due to combining excellent electric property of piezoelectric ceramic and flexibility of polymer matrix. A novel decoupling capacitor with high dielectric constant has been developed by mixing polyamide-11 (PA11) with ferroelectric ceramic lead zirconate titanates (PZT). The composite demonstrates high dielectric constant, with better frequency stability and low dielectric losses. The dependence of the dielectric constant on frequency and polymer fraction was investigated. The excellent dielectric constant of 100 and the dielectric loss of 0.1 can be obtained at a PA11 volume fraction of 0.4. The enhanced dielectric behavior originates from good connection between ferroelectric ceramic and PA11 Dielectric losses of the PZT/PA11 composites change slightly with the test frequency. Our findings suggest that the created polymeric composites with relatively high dielectric constant represent a novel type of material that is flexible and easy to process. Moreover, is suited to applications in advanced decoupling capacitors and flexible electronics.     

复合多铁材料NiFe2O4/BaTiO3的制备及性能

采用溶胶-凝胶与固相反应相结合的方法制备了xNiFe2O4/(1-x)BaTiO3(x=0.1,0.2,0.3,0.4,0.5,0.6)系列复合多铁材料.X射线衍射(XRD)结果表明,复合材料中只含有钙钛矿结构的BaTiO3和尖晶石结构的NiFe2O4,说明共烧过程中两者未发生明显的化学反应,铁电相与铁磁相共存.扫描电子显微镜(SEM)观测结果表明材料内部是异质结构的,高分辨透射电子显微镜(HRTEM)观测结果进一步说明了NiFe2 O4和BaTiO3共存,并且在两种物质的接触处能够看到清晰的界面.这种由BaTiO3和NiFe2 O4组成的复合材料对外同时表现出铁电性和铁磁性.电滞回线结果表明,该复合材料具有铁电性,但存在着一定的漏电.介电频谱表明材料的介电常数随着频率的升高而下降,在低频下达到定值,并且铁磁相的含量对材料的介电性有影响.磁性能测试结果表明材料的磁性源于NiFe2O4,并且磁性随着NiFe2O4含量的增加而增强.     

Ku-band EMI shielding effectiveness and dielectric properties of Polyaniline-Y2O3 composites

Electromagnetic interference (EMI) shielding has become a phenomenon of great concern and there is growing demand towards the synthesis of materials with better EMI shielding effectiveness (EMI SE). This work highlights the preparation of Polyaniline-Yttrium Oxide (PANI-Y₂O₃) composites for EMI shielding applications in the frequency range from 12.4 to 18 GHz (Ku-band). The structure and morphology of the composites were investigated by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). EMI SE, microwave absorption and reflection, dielectric properties of the composites are discussed in detail. All the computations were based on microwave scattering parameters measured by transmission line waveguide technique. The observed results show absorption dominant EMI shielding in these composites with EMI SE of ?19 to ?20 dB, which mainly depends on the dielectric loss of the composites. Through the results of our observations, we propose these composites to be potential materials for microwave absorption and EMI shielding applications.     

All-organic polymer blend dielectrics of poly (arylene ether urea) and polyimide: Toward high energy density and high temperature applications

The development of high-performance dielectric films with high energy density and temperature stability is extremely desired for modern electronics and power systems. Herein, a simple and low-cost approach is proposed to fabricate all-organic blend films prepared from poly (arylene ether urea) (PEEU) and polyimide (PI) via solution casting and thermal imidization process. The incorporation of PEEU in PI matrix significantly improved dielectric breakdown strength and dielectric constant of PI. More precisely, blend film with 15 wt% PEEU exhibited highest energy density 5.14 J/cm³ at 495.65 MV/m, with enhanced dielectric constant of 4.73 and very low dissipation factor of 0.299%. Furthermore, the dielectric properties of the PEEU/PI blend displayed wonderful temperature stability in the range of − 50–+ 250°C, and great frequency stability between 10 and 10⁶ Hz. The blend film also exhibited excellent heat resistance and presented valuable potential in thin film capacitors for high voltage direct current system.     

Enhanced dielectric performance of TPU composites filled with Graphene@poly(dopamine)-Ag core-shell nanoplatelets as fillers

A new type of graphene@poly(dopamine)-Ag (Gns@PDA-Ag) core-shell nanoplatelets was designed to improve the dielectric properties of thermoplastic polyurethane (TPU) composites. The microstructure, dielectric performances and the effects of Ag nanoparticles’ content on the dielectric properties of composites were investigated. Results showed that the addition of Gns@PDA-Ag nanoplatelets could effectively improve the dielectric constant of the composite. When tested at low frequency (below 100 Hz), the highest dielectric constant of the TPU/Gns@PDA-0.78Ag (3 wt%) composite was 118.82, which was 14 times higher than that of pure TPU (8.39). This increase in dielectric constant should be attributed to the strong polarization effect of conductive graphene nanoflakes (Gns) and Ag nanoparticles to TPU molecules. The PDA shell could prevent direct contact between Gns and Ag nanoparticles, limit the formation of conductive pathways, which kept the dielectric loss of the composites at a low level and maintained the breakdown strength in a stable state. Compared with pure TPU (0.29), the minimum dielectric loss of composites was only 0.36. Moreover, after Gns@PDA-Ag nanoplatelets with higher Ag content were doped into TPU, the composite showed a higher dielectric constant, and due to the existence of the Coulomb blocking effect, the dielectric loss did not increase significantly. The scalability and simplicity of the described method will provide a promising route to polymer composites for highspeed integrated circuits and energy storage applications.     

Giant dielectric constant and low loss tangent in polypyrrole doped with dodecylbenzene sulfonic acid

Soluble in organic solvent polypyrrole was prepared using dodecylbenzene sulfonic acid as a functional dopant. The dielectric constant was measured as high as 1.6 × 10⁴ at 100 Hz and 450 K with very low dissipation factor. This thermally activated relaxation process plays a dominant role for the low frequency dielectric response. It is suggested that this dipolar polarization may mainly originate from the hopping of charge carriers between localized sites over the potential barriers.     

Fabrication and Analysis of Sepiolite/Glass Microcapsules/Liquid Crystal Polymer Composites

Liquid crystal polymer (LCP) composites filled with sepiolite and glass microcapsules were prepared by melt compounding. The composites were extruded using a twin-screw extruder and injection-molded. The objective of this study is to check a possibility of producing a polymeric composite with a low dielectric constant. Physical characteristics of the composites, such as morphological, rheological, mechanical, and electrical properties were analyzed. In particular, the glass microcapsule-reinforced LCP composites showed a significant improvement in lowering the dielectric constant due to its high air content. Additionally, sepiolite could act as an effective filler to improve the mechanical properties of the composites.     

Epoxide composites with thermally reduced graphite oxide and their properties

The properties of epoxide composites modified by thermal reduced graphite oxide are studied. The dielectric permittivities of epoxide composites with additives of up to 1.5 wt % of reduced graphite oxide are studied at a frequency of 9.8 GHz. It is shown that despite its low electrical conductivity, the large specific surface area of reduced graphite oxide allows us to create epoxide composites with high complex dielectric permittivities and dielectric loss tangents.     

The thermal and dielectric properties of high performance cyanate ester resins/microcapsules composites

Novel high performance bisphenol A dicyanate ester (BADCy) resins/poly(urea-formaldehyde) microcapsules filled with epoxy resins (MCEs) composites have been prepared. The effects of different contents of MCEs on the thermal and dielectric properties of cured BADCy were investigated using dynamic mechanical analyzer (DMA), thermalgravimetric analyzer (TGA) and broadband dielectric analyzer. The dielectric properties of BADCy/MCEs treated in hot water and hot air were also discussed. The morphologies of BADCy/MCEs composites were characterized by scanning electron microscopy (SEM). Results indicate that the appropriate content of MCEs can improve or maintain the thermal stability, the low dielectric constant and dielectric loss of cured BADCy mainly owing to higher conversion of cyanate ester (-OCN) groups. After aged in hot water and hot air, respectively, BADCy/MCEs composites with small content of MCEs can retain the low dielectric constant and dielectric loss.     

Filled latex composites with high dielectric constant, based on dispersed ferroelectrics

The possibility of controlling the physicochemical properties of suspensions and the electrical properties of filled latex composites containing dispersed ferroelectrics was examined. The use of ferroelectrics as fillers allows preparation of polymeric composites with high dielectric constant ? and low dielectric loss, used, e.g., for the development of dielectric functional layers of electroluminescence light sources.     

Role,effect, and influences of micro and nano‐fillers on various properties of polymer matrix composites for microelectronics: A review

Ever since the discovery of polymer composites, its potential has been anticipated for numerous applications in various fields such as microelectronics, automobiles, and industrial applications. In this paper, we review filler reinforced polymer composites for its enormous potential in microelectronic applications. The interface and compatibility between matrix and filler have a significant role in property alteration of a polymer nanocomposites. Ceramic reinforced polymeric nanocomposites are promising candidate dielectric materials for several micro‐ and nano‐electronic devices. Because of its synergistic effect like high thermal conductivity, low thermal expansion, and dielectric constant of ceramic fillers with the polymer matrix, the resultant nanocomposites have high dielectric breakdown strength. The thermal and dielectric properties are discussed in the view of filler alignment techniques and its effect on the composites. Furthermore, the effect of various surface modified filler materials in polymer matrix, concepts of network forming using filler, and benefits of filler alignment are also discussed in this work. As a whole, this review article addresses the overall view to novice researchers on various properties such as thermal and dielectric properties of polymer matrix composites and direction for future research to be carried out.     

聚苯乙烯—钛酸钡复合材料介电性能的研究

以聚苯乙烯与化学沉淀法钛酸钡陶瓷为基本组成，采用溶液共混，溶液聚合，表面处理后溶液聚合三种方法进行复合，发现后两种复合的钛酸钡颗粒表面发生界面变化，形成活性界面，使得溶液聚合法和表面处理后溶液聚合所得到的材料具有较低的介电损耗，在高频下能保持较高的介电系数。     

Thermomechanical behaviors and dielectric properties of polyaniline‐doped para‐toluene sulfonic acid/epoxy resin composites

Composites based on conductive organic/inorganic fillers dispersed in insulating matrix have been widely investigated because of their widespread applications such as electromagnetic shielding, electrostatic discharge, and sensors. In this context, novel composite materials based on epoxy resin matrix charged with polyaniline (PANI)‐doped para‐toluene sulfonic acid were elaborated. Fourier transform infrared spectroscopy, X‐ray diffraction and scanning electron microscopy were used to check the structure and the morphology of the samples. Viscoelastic behavior and thermal stability of the composites were explored by dynamic mechanical thermal analysis and thermogravimetric analysis. It was shown that the PANI particles exhibited a partial crystalline structure and were homogeneously dispersed in epoxy matrix. Consequently, this structure affected the thermal stability and viscoelastic properties of the composites. Furthermore, the dielectric and electrical properties were investigated up to 1 MHz. Measurements of dielectric properties revealed that with loading fillers in matrix, the dielectric parameters increased to high values at low frequency then decreased at values around 40 and 32 of real and imaginary parts, respectively, at 1 MHz with 15% of PANI content. Copyright © 2011 John Wiley & Sons, Ltd.