Ketopinic acid and diisoproylideneketogulonic acid as chiral ion-pair selectors in capillary electrophoresis. Enantiomeric impurity analysis of S-timolol and 1R,2S-ephedrine

1S,4R-(+)-ketopinic acid [(+)-KPA] has been introduced as a chiral selector for the separation of pharmacologically active amines by non-aqueous capillary electrophoresis (NACE). (+)-KPA gave enantioresolution for most of the compounds previously separated by 2R,3S,4R,5S-(-)-2,3:4,6-di-O-isopropylidene-2-keto-L-gulonic acid [(-)-DIKGA], but with a reversed migration order. A complete enantioresolution (Rs=4.2) was obtained for timolol, a compound that could not be resolved using (-)-DIKGA as the selector. Thus, (+)-KPA was evaluated for the enantiomeric purity determination of S-timolol. A method based on pre-concentration by transient isotachophoresis (tITP) provided a limit of detection (LOD) of 0.2% R-timolol in S-timolol samples. Because of the lack of enantioresolution of ephedrine when (+)-KPA was used as the selector, a method with (-)-DIKGA has been developed and validated for determination of the enantiomeric purity of the 1R,2S enantiomer. The method gave good precision and accuracy with an LOD (S/N=3) of 0.033% for the enantiomeric impurity 1S,2R-ephedrine.     

Effect of alkali metal hydroxides on the enantioseparation of amines using di-O-isopropylidene-keto-L-gulonic acid as the selector in NACE

The present work demonstrates the importance of the ionic composition in the BGE for enantioseparation. (-)-2,3:4,6-di-O-Isopropylidene-2-keto-L-gulonic acid ((-)-DIKGA) has been used as the chiral selector in methanolic and ethanolic BGEs. The influence of added alkali metal hydroxides on the EOF and the chiral separation of amines (atenolol, isoprenaline, pindolol and propranolol) have been studied. The ion-pair formation constants in ethanol were determined by precision conductometry for the enantiomers of pindolol with (-)-DIKGA, for Li(+), Na(+) and Cs(+) with (-)-DIKGA, and also for the corresponding alkali metal hydroxides. The effective mobilities and the enantiomeric mobility differences were affected by the type of alkali metal hydroxide (LiOH, NaOH, KOH, RbOH or CsOH) added to the BGE. The effective mobility and mobility difference were increased with decrease in solvated radius of the alkali metal cation. These differences could partly be correlated to the ion-pair formation constants of the alkali metal cations with the chiral selector, affecting the equilibrium concentration of the free selector. The electroosmosis was also affected by the alkali metal hydroxide added to the BGE. The cathodic electroosmosis decreased with decreasing solvated radius of the alkali metal cation added to the BGE. Interestingly, the cathodic EOF was even reversed, i.e. became anodic in the ethanolic BGEs containing KOH, RbOH or CsOH and the methanolic ones with RbOH and CsOH.     

Capillary electrophoretic chiral separation of Cinchona alkaloids using a cyclodextrin selector

A new capillary electrophoretic method for the chiral separation of four major Cinchona alkaloids (quinine/quinidine and cinchonine/cinchonidine) was developed using heptakis-(2,6-di-O-methyl)-beta-cyclodextrin as the chiral selector. The inner walls of the separation capillary were modified with a thin polyacrylamide layer, which substantially reduced the electroosmotic flow and improved the chiral resolution and the reproducibility of the migration time of the analytes. Various operation parameters were optimised, including the pH, the capillary temperature, the concentration of the background electrolyte, and the concentration of the chiral selector. Baseline separation of the two diastereomer pairs was achieved in 12 minutes in ammonium acetate background electrolyte pH 5.0 with addition of cyclodextrin in a concentration of 3 mM or higher.     

Chiral counter-current chromatography of gemifloxacin guided by capillary electrophoresis using (+)-(18-crown-6)-tetracarboxylic acid as a chiral selector

(+)-(18-crown-6)-tetracarboxylic acid (18C6H4) has been known as a highly efficient chiral selector for resolving primary amine enantiomers in capillary electrophoresis (CE). We investigated the chiral separation of gemifloxacin using 18C6H4 in analytical counter-current chromatography (CCC). The separation conditions for CE, including the binding constant, pH, and run buffer constituents, provided a helpful guideline for chiral CCC. A successful separation of gemifloxacin enantiomers could be achieved using a two-phase solvent system composed of 1-butanol-ethyl-acetate-bis(2-hydroxyethyl)aminotris(hydroxymethyl)methane acetate buffer with a small amount of 18C6H4. The hydrophobicity of the solvent system and the 18C6H4 concentration were varied to optimize the chiral separation.     

Non-aqueous capillary electrophoretic separation of enantiomeric amines with (-)-2,3:4,6-di-O-isopropylidene-2-keto-L-gulonic acid as chiral counter ion

(-)-2,3:4,6-Di-O-isopropylidene-2-keto-L-gulonic acid [(-)-DIKGA] has been introduced as a chiral counter ion in non-aqueous capillary electrophoresis. High enantioresolutions (R(s)> or =3) were obtained for amines, e.g., pronethalol, labetalol and bambuterol. Methanol containing NaOH and (-)-DIKGA was used as the background electrolyte. The counter ion concentration and the nature of the injection medium were found to affect the chiral separation. Covalent coating of the fused-silica capillary reduced the electro-osmotic flow resulting in improved enantioresolutions.     

Resolution of (+/-)-ibuprofen using (-)-brucine as a chiral selector by thin layer chromatography

The enantiomeric resolution of (+/-)-ibuprofen into its enantiomers was achieved by TLC on silica gel plate using optically pure (-)-brucine as a chiral selector and acetonitrile-methanol (5:1, v/v) as the solvent system. Spots were located in an iodine chamber. The detection limit was 4.9 microg. The effect of concentration of the chiral selector, temperature and pH on resolution has been studied.     

Two-component chiral phase transfer catalysts: enantioselective esterification of an N-acylated amino acid

[see reaction]. The first example of a two-component chiral phase transfer catalyst is described which, operating in a biphasic solvent system, preferentially esterifies one enantiomer of a racemic N-acylated amino acid. The two-component catalyst is comprised of an achiral quaternary ammonium ion and a proline-derived chiral selector initially developed for the liquid chromatographic separation of enantiomers.     

Simultaneous stereoselective analysis of tramadol and its main phase I metabolites by on-line capillary zone electrophoresis-electrospray ionization mass spectrometry

On-line combination of partial filling capillary electrophoresis and electrospray ionization mass spectrometry was demonstrated for the simultaneous enantioseparation of tramadol and its main phase I metabolites. The partial filling technique was efficient at avoiding MS contamination by the chiral selector. Different experimental factors were investigated, including the chiral selector nature and concentration, plug length as well as the separation temperature. The best enantioseparation of the investigated compounds was achieved with a coated polyvinyl alcohol capillary and a 40 mM ammonium acetate buffer, pH 4.0, adding sulfobutyl ether beta-cyclodextrin (2.5 mg/ml) as the chiral selector. The charged cyclodextrin not only allowed enantioseparation of tramadol and its metabolites, but also improved the selectivity of compounds with the same molecular mass. Finally, CE-electrospray ionisation-MS was successfully applied to the stereoselective analysis of tramadol and its main metabolites in plasma after a simple liquid-liquid extraction.     

Enantioseparation of pheniramine enantiomers by high‐speed countercurrent chromatography using β‐cyclodextrin derivatives as a chiral selector

The enantioselective separation of pheniramine was studied by a high‐speed countercurrent chromatography method using β‐cyclodextrin derivatives as a chiral selector. Several key variables, for instance, type of organic solvent and chiral selector, concentration of chiral selector, pH value of aqueous phase, and temperature on the enantioselectivity, were investigated systematically by liquid–liquid extraction experiments. Combining the results of extraction experiments and high‐speed countercurrent chromatography, the most suitable conditions for separation of pheniramine enantiomers were obtained with the two‐phase system that consisted of isobutyl acetate/aqueous phase, containing 0.02 mol/L carboxymethyl‐β‐cyclodextrin, pH 8.50 at 278.15 K. Under the optimal conditions, pheniramine enantiomer was successfully resolved after four cycles of high‐speed countercurrent chromatography. By using high‐performance liquid chromatography to analyze the fractions, the purities of both (+)‐pheniramine and (–)‐pheniramine were over 99% and the recovery of this method was up to 85–90%.     

Chiral separation of NBD-amino acids by ligand-exchange micro-channel electrophoresis.

The chiral separation of amino acid derivatives by ligand-exchange electrophoresis in a microchannel chip was performed for the first time. A Cu(II) complex with L-prolinamide was used as a chiral selector. The migration behaviors of eleven NBD-DL-amino acids were investigated by ligand-exchange capillary electrophoresis (LE-CE). The enantiomer of five NBD-amino acids (Ser, Thr, Val, Phe and His) could be separated by LE-CE using a 20 mM ammonium acetate buffer (pH 9.0) containing 10 mM copper acetate, 20 mM L-prolinamide and 1 mM SDS. NBD-His was eluted in the order D-form and L-form, while the elution order of another enantiomers was L-form and D-form. Under this condition, the enantioseparation of these five NBD-amino acids by ligand-exchange microchip electrophoresis (LE-ME) was investigated using a glass microchip. The enantioseparation of NBD-Ser, -Thr and -His could be successfully accomplished by LE-ME. LE-ME was superior to LE-CE in terms of the short migration time and a good enantiomeric separation.     

Determination of Vanillin, Eugenol and Isoeugenol by RP-HPLC

N-(3-sulfo, 3-carboxy)-propionylchitosan (SCPC) has been investigated as new chiral selector for capillary electrophoresis. The running buffer species, pH and the chiral selector concentration were the parameters studied to achieve the enantioseparation. The best results were obtained using 2% chiral selector in acetate running buffer. Baseline enantioseparation was obtained for pindolol, fluoxetine and chlorcyclizine. The enantioselectivity of the N-(3-sulfo, 3-carboxy)-propionylchitosans obtained from low-molecular mass (MWη 7 kDa) and high-molecular mass (MWη 200 kDa) chitosans is similar. The N-(3-sulfo, 3-carboxy)-propionylchitosan appear to have a mechanism of enantiorecognition somewhat different from that on others charged polysaccharides due to the presence of an additional chiral center in the monosaccharide residue.     

Di-n-amyl L-tartrate-boric acid complex chiral selector in situ synthesis and its application in chiral nonaqueous capillary electrophoresis

A chiral selector, di-n-amyl L-tartrate-boric acid complex, was in situ synthesized by the reaction of di-n-amyl L-tartrate with boric acid in a nonaqueous background electrolyte (BGE) using methanol as the medium. And a new method of chiral nonaqueous capillary electrophoresis (NACE) was developed with the complex as the chiral selector. It has been demonstrated that the chiral selector is suitable for the enantioseparation of some β-blockers and β-agonists in NACE. Some chiral analytes that could not be resolved in aqueous microemulsion electrokinetic chromatography (MEEKC) with the same chiral selector obtained baseline resolutions in the NACE system. The enantioseparation mechanism was considered to be ion-pair principle and the nonaqueous system was more favorable for the ion-pair formation which is quite useful for the chiral recognition. The addition of a proper concentration of triethylamine into the BGE to control the apparent pH (pH*) enhanced the enantiomeric discrimination. In order to achieve a good enantioseparation, the effects of di-n-amyl L-tartrate and boric acid concentration, triethylamine concentration, applied voltage, as well as capillary length were investigated. Under the optimum conditions, all of the tested chiral analytes including six β-blockers and five β-agonists were baseline resolved.     

Hydroxyethylammonium monosubstituted cyclodextrin as chiral selector for capillary electrophoresis

A novel cationic cyclodextrin, mono-6^A-(2-hydroxyethyl-1-ammonium)-6^A-β-cyclodextrin chloride (HEtAMCD) has been successfully synthesized and applied as chiral selector in capillary electrophoresis. The NMR study revealed this chiral selector has three recognition sites: β-CD, ammonium cation and hydroxy group in the sidearm to contribute three corresponding driving forces including inclusion complexation, electrostatic interaction and hydrogen bonding. The effect of buffer pH and HEtAMCD concentration (2.5–10 mM) on enantioselectivity, chiral resolution as well as effective mobility of analytes was investigated. This elegantly designed CD exhibits outstanding enantioselectivities toward the studied hydroxyl acids and ampholytic racemates in CE with the aid of extra hydrogen bonding. Under optimum pH 6.0, chiral resolutions over 5 can be readily obtained for hydroxy acids with CD concentration below 5 mM. The comparison study between HEtAMCD and our earlier reported ammonium CDs indicates the hydroxyethylammonium group of HEtAMCD significantly increased the enantioselective capability.     

Chiral CE of aromatic amino acids by ligand-exchange with zinc(II)-L-lysine complex

A novel method of chiral ligand-exchange CE was developed with either L- or D-lysine (Lys) as a chiral ligand and zinc(II) as a central ion. This type of chiral complexes was explored for the first time to efficiently separate either individual pairs of or mixed aromatic amino acid enantiomers. Using a running buffer of 5 mM ammonium acetate, 100 mM boric acid, 3 mM ZnSO(4) x 7H(2)O and 6 mM L-Lys at pH 7.6, unlabeled D,L-tryptophan, D,L-phenylalanine, and D,L-tyrosine were well separated, giving a chiral resolution of up to 7.09. The best separation was obtained at a Lys-to-zinc ratio of 2:1, zinc concentration of 2-4 mM and running buffer pH 7.6. The buffer pH was determined to have a strong influence on resolution, while buffer composition and concentration impacted on both the resolution and peak shape. Boric acid with some ammonium acetate was an adoptable buffer system, and some additives like ethylene diamine tetraacetic acid capable of destroying the complex should be avoided. Fine-tuning of the chiral resolution and elution order was achieved by regulating the ratio of L-Lys to D-Lys; i.e. the resolution increased from zero to its highest value as the ratio ascended from 1:0 to 1:infinitive, and L-isomers eluted before or after D-isomers in excessive D- or L-Lys, respectively.     

Enantioselective capillary electrophoresis-mass spectrometry of amino acids in cerebrospinal fluid using a chiral derivatizing agent and volatile surfactant

The sensitivity of coupled enantioselective capillary electrophoresis-mass spectrometry (CE-MS) of amino acids (AAs) is often hampered by the chiral selectors in the background electrolyte (BGE). A new method is presented in which the use of a chiral selector is circumvented by employing (+)-1-(9-fluorenyl)ethyl chloroformate (FLEC) as chiral AA derivatizing agent and ammonium perfluorooctanoate (APFO) as a volatile pseudostationary phase for separation of the formed diastereomers. Efficient AA derivatization with FLEC was completed within 10 min. Infusion experiments showed that the APFO concentration hardly affects the MS response of FLEC-AAs and presents significantly less ion suppression than equal concentrations of ammonium acetate. The effect of the pH and APFO concentration of the BGE and the capillary temperature were studied in order to achieve optimized enantioseparation. Optimization of CE-MS parameters, such as sheath-liquid composition and flow rate, ESI and MS settings was performed in order to prevent analyte fragmentation and achieve sensitive detection. Selective detection and quantification of 14 chiral proteinogenic AAs was achieved with chiral resolution between 1.2 and 8.6, and limits of detection ranging from 130 to 630 nM injected concentration. Aspartic acid and glutamic acid were detected, but not enantioseparated. The optimized method was applied to the analysis of chiral AAs in cerebrospinal fluid (CSF). Good linearity (R² > 0.99) and acceptable peak area and electrophoretic mobility repeatability (RSDs below 21% and 2.4%, respectively) were achieved for the chiral proteinogenic AAs, with sensitivity and chiral resolution mostly similar to obtained for standard solutions. Next to l-AAs, endogenous levels of d-serine and d-glutamine could be measured in CSF revealing enantiomeric ratios of 4.8%–8.0% and 0.34%–0.74%, respectively, and indicating the method's potential for the analysis of low concentrations of d-AAs in presence of abundant l-AAs.     

Chiral ionic liquids for enantioseparation of pharmaceutical products by capillary electrophoresis

A chiral ionic liquid (IL), S-[3-(chloro-2-hydroxypropyl)trimethylammonium] [bis((trifluoromethyl)sulfonyl)amide] (S-[CHTA](+)[Tf(2)N](-)), which can be easily and readily synthesized in a one-step process from commercially available reagents, can be successfully used both as co-electrolyte and as a chiral selector for CE. A variety of pharmaceutical products including atenolol, propranolol, warfarin, indoprofen, ketoprofen, ibuprofen and flurbiprofen, can be successfully and baseline separated with the use of this IL as electrolyte. Interestingly, while S-[CHTA](+)[Tf(2)N](-) can also serve as a chiral selector, enantioseparation cannot be successfully achieved with S-[CHTA](+)[Tf(2)N](-) as the only chiral selector. In the case of ibuprofen, a second chiral selector, namely a chiral anion (sodium cholate), is needed for the chiral separation. For furbiprofen, in addition to S-[CHTA](+)[Tf(2)N](-) and sodium cholate, a third and neutral chiral selector, 1-S-octyl-beta-d-thioglucopyranoside (OTG), is also needed. Due to the fact that the chirality of this chiral IL resides on the cation (i.e., -[CHTA](+)), and that needed additional chiral selector(s) are either chiral anion (i.e., cholate) or chiral neutral compound (OTG), the results obtained seem to suggest that additional chiral selector(s) are needed to provide the three-point interactions needed for chiral separations.     

Enantioseparations in non-aqueous capillary electrochromatography using polysaccharide type chiral stationary phases

Enantioseparations of chiral compounds with different structures were studied in non-aqueous capillary electrochromatography (NAQ CEC). Three different polysaccharide derivatives, cellulose tris(3,5-dimethylphenylcarbamate) (Chiralcel OD), amylose tris(3,5-dimethylphenylcarbamate) (Chiralpak AD) and cellulose tris(4-methylbenzoate) (Chiralcel OJ) were used as chiral stationary phases (CSPs). Methanolic or ethanolic ammonium acetate solutions served as a mobile phase. The effect of the type of the CSP, the loading of the chiral selector on wide-pore aminopropyl derivatized silica gel and operational parameters such as apparent pH, applied voltage, etc. on the EOF and chromatographic characteristics (alpha, N, Rs) were studied. NAQ CEC represents a valuable alternative and an extension to chiral separations by HPLC with common-size columns as well as to capillary LC and CEC in aqueous buffers.     

Chiral separation of amines with N-benzoxycarbonylglycyl-L-proline as selector in non-aqueous capillary electrophoresis using methanol and 1,2-dichloroethane in the background electrolyte

N-Benzoxycarbonylglycyl-L-proline (L-ZGP) has been introduced as a chiral selector for enantioseparation of amines in non-aqueous capillary electrophoresis. Methanol mixed with different proportions of dichloromethane, 1,2-dichloroethane or 2-propanol containing L-ZGP and ammonium acetate was used as the background electrolyte. Enantioseparation of different types of pharmacologically active amines was performed, e.g. the local anaesthetic bupivacaine and the beta-adrenoceptor blocking agent pindolol. Addition of the solvents (dichloromethane, 1,2-dichloroethane or 2-propanol) gave an improved chiral separation partly due to a distinct decrease in the electroosmotic flow. The use of 1,2-dichloroethane in the background electrolyte gave higher precision in migration time (RSD 2.2%) compared to the systems containing dichloromethane. An enantiomeric separation of mepivacaine was performed within 72 s by use of short-end injection with an effective capillary length of 8.5 cm.     

毛细管电泳法分离联萘酚对映体

利用新的手性选择剂苄基氯化辛可宁，在非水相中成功地分离了联萘酚的对映体，并对分离的机理作了初步地探讨。