Transformation of aromatic bromides into aromatic nitriles via formations of grignard reagents and their DMF adducts

Various aromatic bromides were efficiently transformed into the corresponding aromatic nitriles in good yields via the formations of Grignard reagents and subsequently N,N-dimethyl formamide (DMF) adducts, followed by treatment with molecular iodine (I₂) in aq NH₃ at room temperature. The present reaction is an easy and practical method for the preparation of aromatic nitriles from aromatic bromides with less toxic reagents, such as Mg, DMF, I₂, and aq NH₃.     

Practical one-pot conversion of aryl bromides and β-bromostyrenes into aromatic nitriles and cinnamonitriles

Various aryl bromides were efficiently converted into the corresponding aromatic nitriles in good yields by the treatment with Mg turnings and subsequently DMF, followed by treatment with molecular iodine and aq NH₃. The same treatment of aryl bromides, which are weakly reactive to Mg turnings, with ⁱPrMgCl·LiCl and subsequently DMF, followed by the treatment with molecular iodine and aq NH₃ also afforded the corresponding aromatic nitriles in good yields. On the other hand, when N-formylpiperidine was used instead of DMF, p-substituted β-bromostyrenes were converted into the corresponding p-substituted cinnamonitriles, i.e., α,β-unsaturated nitriles, in good to moderate yields by the same procedure. The reactions were carried out by means of a simple experimental procedure and did not require any toxic metal cyanides or expensive rare metals. Therefore, the present reactions are practical and environmentally benign one-pot methods for the preparation of aromatic nitriles, cinnamonitriles, and aliphatic nitriles from aryl bromides, β-bromostyrenes, and alkyl bromides, respectively, through the formation of Grignard reagents and their DMF or N-formylpiperidine adducts.     

Facile preparation of aromatic esters from aromatic bromides with ethyl formate or DMF and molecular iodine via aryllithium

Various aromatic bromides were treated with n-BuLi and subsequently with ethyl formate, followed by the reaction with ethanol and molecular iodine in the presence of K₂CO₃ to provide the corresponding aromatic ethyl esters in good yields. Moreover, aromatic bromides could be transformed into the corresponding aromatic methyl esters in good yields by the treatment with n-BuLi and subsequently with DMF, followed by the reaction with methanol, molecular iodine, and K₂CO₃. Some aromatics could be also converted into the corresponding aromatic esters in good yields by the treatment with n-BuLi, and subsequently with ethyl formate or DMF, followed by the reaction with molecular iodine and K₂CO₃. The present reactions offer a novel route for the transition-metal-free, carbon-monoxide-free, and therefore environmentally benign one-pot conversion of aromatic bromides and aromatics into aromatic esters.     

Practical one-pot transformation of electron-rich aromatics into aromatic nitriles with molecular iodine and aq NH3 using Vilsmeier–Haack reaction

Various electron-rich aromatics could be efficiently transformed into the corresponding aromatic nitriles in good to moderate yields by treatment with DMF and POCl₃, followed by the reaction with molecular iodine or 1,3-diiodo-5,5-dimethylhydantoin (DIH) in aq NH₃. Some of less reactive aromatics, such as anisole, 1,2-dimethoxybenzene, 1,4-dimethoxybenzene, and mesityrene, could be also transformed into the corresponding aromatic nitriles in good to moderate yields using N-methylformanilide and O(POCl₂)₂, followed by the reaction with molecular iodine in aq NH₃. Moreover, propiophenone derivatives could be successfully transformed into the corresponding β-chlorocinnamonitriles by the reaction with DMF and POCl₃, followed by the reaction with molecular iodine and aq NH₃. These reactions are novel metal-free one-pot methods for the preparation of aromatic nitriles from electron-rich aromatics and β-chlorocinnamonitriles from propiophenones.     

Facile preparation of aromatic ketones from aromatic bromides and arenes with aldehydes

Aromatic ketones were efficiently prepared in good yields by the reactions of aryl bromides with n-BuLi, followed by the reactions with aromatic aldehydes or aliphatic aldehydes and the subsequent treatment with molecular iodine and K₂CO₃, in a one-pot method. The same treatment of arenes, instead of aromatic bromides, also provided the corresponding aromatic ketones in good yields. Using these methods, various diaryl ketones and alkyl aryl ketones bearing electron-rich aromatics and electron-deficient aromatics could be prepared efficiently by a simple, transition-metal-free, and therefore environmentally benign experimental procedure.     

Transformation of aromatic bromides into aromatic nitriles with n-BuLi,pivalonitrile, and iodine under metal cyanide-free conditions

Various aromatic nitriles could be obtained in good yields by the treatment of aryl bromides with n-butyllithium and then pivalonitrile, followed by the treatment with molecular iodine at 70 °C, without metal cyanides under transition-metal-free conditions. The present reaction proceeds through the radical β-elimination of imino-nitrogen-centered radicals formed from the reactions of imines and N-iodoimines under warming conditions. © 2019 Elsevier Science. All rights reserved.     

Metal-free one-pot oxidative conversion of benzylic alcohols and benzylic halides into aromatic amides with molecular iodine in aq ammonia, and hydrogen peroxide

Various primary alcohols, particularly benzylic alcohols, could be converted into the corresponding aromatic amides in good yields in a one-pot manner by treatment with molecular iodine in aq. NH₃, followed by reaction with ∼30% aq H₂O₂. Similarly, various benzylic halides could be also converted into the corresponding aromatic amides in good yields in a one-pot manner by treatment with molecular iodine in aq NH₃, followed by reaction with ∼30% aq H₂O₂. The present reactions involve the metal-free one-pot oxidative conversion of benzylic alcohols and benzylic halides into the corresponding aromatic amides, respectively.     

Facile transformation of esters to nitriles

Various esters were efficiently converted into the corresponding nitriles in good yields by the treatment with sodium diisobutyl-tert-butoxyaluminium hydride (SDBBA-H), followed by treatment with molecular iodine in aq ammonia. The present one-pot method is very efficient and practical for the conversion of various aromatic and aliphatic esters into the corresponding nitriles.     

Direct oxidative conversion of alkyl halides into nitriles with molecular iodine and 1,3-diiodo-5,5-dimethylhydantoin in aq ammonia

Various benzylic halides were smoothly and directly converted into the corresponding aromatic nitriles in high yields using molecular iodine and 1,3-diiodo-5,5-dimethylhydantoin, respectively, in aq ammonia. Similarly, primary alkyl halides were also converted into corresponding nitriles in moderate to good yields using molecular iodine and 1,3-diiodo-5,5-dimethylhydantoin in aq ammonia, although a long reaction time was required. The present reaction is a new method for the preparation of aromatic nitriles from benzylic halides and a new method for the conversion of alkyl halides into corresponding nitriles with retention of the number of carbon atoms.     

Direct transformation of N,N-disubstituted amides and isopropyl esters to nitriles

Various N,N-dimethyl amides, N-methoxy-N-methyl amides, and isopropyl esters were smoothly transformed into the corresponding nitriles in good to moderate yields by the treatment with diisobutylaluminium hydride, followed by treatment with molecular iodine in aq ammonia. The present reactions are novel one-pot and practical methods for the transformation of N,N-disubstituted amides and isopropyl esters into nitriles, through the formation of hemiaminal O-AlBu₂ and hemiacetal O-AlBu₂, respectively.     

Direct oxidative conversion of alcohols and amines to nitriles with molecular iodine and DIH in aq NH3

Simple and high-yield procedures for the direct oxidative conversion of various primary alcohols, and primary, secondary, and tertiary amines to the corresponding nitriles were successfully carried out with molecular iodine in aq ammonia and 1,3-diiodo-5,5-dimethylhydantoin in aq NH₃, respectively.     

Facile one-pot preparation of 5-aryltetrazoles and 3-arylisoxazoles from aryl bromides

The successive treatment of aryl bromides with n-BuLi, DMF, hydroxylamine hydrochloride, and finally diphenylphosphoryl azide provided efficiently the corresponding 5-aryltetrazoles in good to moderate yields. Similarly, the successive treatment of aryl bromides with n-BuLi, DMF, hydroxylamine hydrochloride, and finally diethyl acetylenedicarboxylate and Oxone^® provided efficiently the corresponding diethyl 3-arylisoxazole-4,5-dicarboxylates in good to moderate yields. Aromatic aldoximes are the key intermediates in both reactions, and 5-aryltetrazoles and 3-arylisoxazoles could be obtained from aryl bromides in one pot under transition-metal-free conditions.     

Efficient homo-coupling reactions of heterocyclic aromatic bromides catalyzed by Pd(OAc)2 using indium

Homo-coupling reactions of heterocyclic aromatic bromides smoothly proceeded with cat-Pd(OAc)₂, indium, and LiCl in DMF to afford exclusively symmetric biaryls possessing heterocyclic aromatic ring in good to excellent yields.     

A simple one-pot procedure for the direct conversion of alcohols into alkyl nitriles using TsIm

A convenient and efficient one-pot preparation of nitriles from alcohols using N-(p-toluenesulfonyl)imidazole (TsIm) is described. In this method, treatment of alcohols with a mixture of NaCN, TsIm and triethylamine in the presence of catalytic amounts of tetra-n-butylammonium iodide (TBAI) in refluxing DMF furnishes the corresponding alkyl nitriles in good yields. This methodology is highly efficient for various structurally diverse alcohols with selectivity for ROH: 1° > 2° > 3°.     

An efficient synthesis of cyclopropyl silyl ketones

The reaction of silylcyclopropyl bromides with dichloromethyl methyl ether in the presence of n-butyllithium is investigated. Under basic reaction conditions, the corresponding cyclopropylidene derivatives are exclusively obtained. The resulting cyclopropylidene compounds are subjected to protonolysis or trapping with electrophiles in a one-pot to give the cyclopropyl silyl ketone derivatives in good yields. Acidic treatment of derived cyclopropyl silyl ketone allows isomerization to give the thermodynamically favorable trans form exclusively.     

Palladium-catalyzed cross-coupling of cyclopropylmethyl N-tosylhydrazones with aromatic bromides: an easy access to multisubstituted 1,3-butadienes

Direct synthesis of 1,1-disubstitued 1,3-butadienes has been efficiently realized from the cross-coupling of cyclopropylmethyl N-tosylhydrazones with aromatic bromides by means of PdCl₂(MeCN)₂ as catalyst. 1,1,4-Trisubstitued 1,3-butadiene derivatives were obtained in up to 70% yields through a one-pot procedure catalyzed by Pd(OAc)₂ in the presence of excessive amount of aromatic bromides. The present methodology provides an easy and efficient route to multisubstituted 1,3-butadienes.     

Preparation of Polyfunctionalized Aromatic Nitriles from Aryl Oxazolines

A selective ortho,ortho’-functionalization of readily available aryl oxazolines by two successive magnesiations with sBu₂Mg in toluene followed by trapping reactions with electrophiles, such as (hetero)aryl iodides or bromides, iodine, tosyl cyanide, ethyl cyanoformate or allylic bromides (39 examples, 62–99 % yield) is reported. Treatment of these aryl oxazolines with excess oxalyl chloride and catalytic amounts of DMF (50 °C, 4 h) provided the corresponding nitriles (36 examples, 73–99 % yield). Conversions of these nitriles to valuable heterocycles are reported, and a tentative mechanism is proposed.     

Practical one-pot preparation of ketones from aryl and alkyl bromides with aldehydes and DIH via Grignard reagents

Various diaryl ketones, alkyl aryl ketones, and dialkyl ketones were efficiently prepared in good yields by the reactions of the Grignard reagents derived from aryl or alkyl bromides, followed by the reactions with aromatic or aliphatic aldehydes and the subsequent treatment with 1,3-diiodo-5,5-dimethylhydantoin and K₂CO₃, in a one-pot method. The same treatment of aromatic bromides bearing electron-withdrawing groups, such as ester, nitrile, ketone, and nitro groups with i-PrMgCl·LiCl or PhMgCl instead of Mg, also provided the corresponding diaryl and alkyl aryl ketones in good yields. The above methods are simple and practical transition-metal-free methods for the preparation of various diaryl ketones and alkyl aryl ketones bearing electron-rich aromatic groups and electron-deficient aromatic groups, as well as dialkyl ketones.     

Copper-catalyzed synthesis of 5-substituted 1H-tetrazoles via the [3+2] cycloaddition of nitriles and trimethylsilyl azide

The [3+2] cycloaddition between various nitriles and trimethylsilyl azide proceeds smoothly in the presence of a Cu^I catalyst in DMF/MeOH, to give the corresponding 5-substituted 1H-tetrazoles in good to high yields. The reaction most probably proceeds through the in situ formation of a copper azide species, followed by a successive [3+2] cycloaddition with the nitriles.     

One-pot synthesis of aryl butyl tellurides from tellurium tetrachloride and activated aromatics through a solventless step

A solventless preparation of aryl tellurium trichlorides from activated aromatic compounds avoiding the use of hazardous solvents as carbon tetrachloride and chloroform is described. The trichlorides were reduced and alkylated leading to aryl butyl tellurides in a one-pot procedure. Transmetallation of these tellurides with n-butyllithium followed by reaction with benzaldehyde gave the corresponding benzhydrols in good yields.