The optimal velocity traffic flow models with open boundaries

The effects of the open boundaries on the dynamical behavior of the optimal velocity traffic flow models with a delay time allowing the car to reach its optimal velocity is studied using numerical simulations. The particles could enter the chain with a given injecting rate probability , and could leave the system with a given extracting rate probability . In the absence of the variation of the delay time , it is found that the transition from unstable to metastable and from metastable to stable state occur under the effect of the probabilities rates and . However, for a fixed value of , there exist a critical value of the extraction rate above which the wave density disappears and the metastable state appears and a critical value above which the metastable state disappears while the stable state appears. and depend on the values of and the variation of the delay time . Indeed and increase when increasing and/or decreasing . The flow of vehicles is calculated as a function of , and for a fixed value of . Phase diagrams in the ( ) plane exhibits four different phases namely, unstable, metastable, stable. The transition line between stable phase and the unstable one is curved and it is of first order type. While the transition between stable (unstable) phase and the metastable phase are of second order type. The region of the metastable phase shrinks with increasing the variation of the delay time and disappears completely above a critical value .Received: 23 July 2003, Published online: 8 December 2003PACS: 05.50. + q Lattice theory and statistics (Ising, Potts, etc.) - 64.60.Cn Order-disorder transformations; statistical mechanics of model systems - 75.30.Kz Magnetic phase boundaries (including magnetic transitions, metamagnetism, etc.) - 82.20.Wt Computational modeling; simulation     

Aggregate size distributions in migration driven growth models

The kinetics of aggregate growth through reversible migrations between any two aggregates is studied. We propose a simple model with the symmetrical migration rate kernel at which the monomers migrate from the aggregates of size k to those of size j. The results show that for the case, the aggregate size distribution approaches a conventional scaling form; moreover, the typical aggregate size grows as in the case and as in the case. We also investigate another simple model with the asymmetrical rate kernel ( ), which exhibits some scaling properties quite different from the symmetrical one. The aggregate size distribution satisfies the conventional scaling form only in the case of and , and the typical aggregate size grows as .Received: 14 October 2003, Published online: 23 December 2003PACS: 82.20.-w Chemical kinetics and dynamics - 68.43.Jk Diffusion of adsorbates, kinetics of coarsening and aggregation - 89.75.Da Systems obeying scaling laws     

Scale dependent partitioning of one-dimensional aperiodic set diffraction

We give a multiresolution partition of pure point parts of diffraction patterns of one-dimensional aperiodic sets. When an aperiodic set is related to the Golden Ratio, denoted by , it is well known that the pure point part of its diffractive measure is supported by the extension ring of , denoted by . The partition we give is based on the formalism of the so called -integers, denoted by . The set of -integers is a selfsimilar set obeying , . The pure point spectrum is then partitioned with respect to this Russian doll like sequence of subsets . Thus we deduce the partition of the pure point part of the diffractive measure of aperiodic sets.Received: 24 March 2004, Published online: 12 July 2004PACS: 61.44.Br Quasicrystals - 61.10.Dp Theories of diffraction and scattering     

Dynamics of a two-level system coupled to Ohmic bath: a perturbation approach

The quantum dynamics, both non-equilibrium and equilibrium, of the dissipative two-level system is studied by means of the perturbation approach based on a unitary transformation. It works well for the whole parameter range and and our main results are: the coherence-incoherence transition is at ; for the non-equilibrium correlation ; the susceptibility is of a double peak structure for and the Shibas relation is exactly satisfied; at the transition point the equilibrium correlation in the long time limit.Received: 14 October 2003, Published online: 8 June 2004PACS: 72.20.Dp General theory, scattering mechanisms - 05.30.-d Quantum statistical mechanics     

Thermal conductivity of doped $\mathsf{La_2CuO_4}$ as an example for heat transport by optical phonons in complex materials

We investigate the phonon thermal conductivity of doped based on out-of-plane thermal conductivity measurements. When room temperature is approached the temperature dependence of strongly deviates from the T^-1-decrease which is usually expected for heat transport by acoustic phonons. Instead, decreases much weaker or even increases with rising temperature. Simple arguments suggest that such unusual temperature dependencies of are caused by heat transport via dispersive optical phonons.Received: 20 October 2003, Published online: 20 April 2004PACS: 66.70. + f Nonelectronic thermal conduction and heat-pulse propagation in solids; thermal waves - 74.72.Dn La-based cuprates - 44.10. + i Heat conduction     

The stationary properties and the state transition of the tumor cell growth mode

We study the stationary properties and the state transition of the tumor cell growth model (the logistic model) in presence of correlated noises for the case of nonzero correlation time. We derived an approximative Fokker-Planck equation and the stationary probability distribution (SPD) of the model. Based the SPD, we investigated the effects of both correlation strength ( ) and correlation time ( ) of cross-correlated noises on the SPD, the mean of the tumor cell population and the normalized variance ( ) of the system, and calculated the state transition rate of the system between two stable states. Our results indicate that: (i) and play opposite roles in the stationary properties and the state transition of the system, i.e. increase of can produce a smaller mean value of the cell population and slow down the state transition, but increase of can produce a larger mean value of the cell population and enhance state transition; (ii) For large , there a peak structure on both - plot and - plot. For the small , increases with increasing , but increases with decreasing .Received: 26 June 2004, Published online: 30 September 2004PACS: 87.10. + e General theory and mathematical aspects - 05.40.-a Fluctuation phenomena, random processes, noise, and Brownian motion - 02.50.Ey Stochastic processes     

Scaling behavior of jamming fluctuations upon random sequential adsorption

It is shown that the fluctuations of the jamming coverage upon Random Sequential Adsorption (RSA) ( ), decay with the lattice size according to the power-law , with ,where D is the dimension of the substrate and is the fractal dimension of the set of sites belonging to the substrate where the RSA process actually takes place. This result is in excellent agreement with the figure recently reported by Vandewalle et al. [Eur. Phys. J. B 14, 407 (2000)], namely for the RSA of needles with D = 2 and , that gives . Furthermore, our prediction is in excellent agreement with different previous numerical results. The derived relationships are also confirmed by means of extensive numerical simulations applied to the RSA of dimers on both stochastic and deterministic fractal substrates.Received: 17 October 2003, Published online: 8 December 2003PACS: 05.40.-a Fluctuation phenomena, random processes, noise, and Brownian motion - 02.50.-r Probability theory, stochastic processes, and statistics     

$\mathsf{\sqrt{3}}$ linear structures in the Te/Ni(111) system

Surface structures in the Te/Ni(111) system are revealed by using reflection high-energy electron diffraction combined with X-ray and ultraviolet photoelectron spectroscopies. At a 0.33 mono-layer (ML)-Te/Ni(111) surface, a reversible structural phase transition is observed with a transition temperature T_c of 380 C. The diffraction pattern from the low temperature phase is accompanied by streaks. The high and low temperature phases are characterized by and rectangle, respectively. The mechanism of the phase transition is explained by the order-disorder transition with a rumpled chain model. Both 0.51 ML- and 0.44 ML-Te/Ni(111) surfaces exhibit the complex diffraction patterns accompanied by diffuse streaks. These surface structures are characterized by the rectangle and , respectively. All diffuse streaks obtained at the above surfaces are consistently interpreted in the view of the ill-ordered arrangements of the well-ordered linear chains. It is shown that the linear structure is the key in the Te/Ni(111) system.Received: 1 December 2003, Published online: 20 April 2004PACS: 61.14.Hg Low-energy electron diffraction (LEED) and reflection high-energy electron diffraction (RHEED) - 68.65.-k Low-dimensional, mesoscopic, and nanoscale systems: structure and nonelectronic properties - 64.60.Cn Order-disorder transformations; statistical mechanics of model systems     

Structural and magnetic properties of \lbrackEr|Tb\rbrackmultilayers

We have investigated the structural and magnetic properties of Er|Tb multilayers by different scattering methods. Diffuse X-ray scattering under grazing incidence reveals the interface structure in Er|Tb bilayers and trilayers, indicating vertically correlated roughness between the Er and Tb interfaces. The magnetic properties of Er_nEr|Tb_nTb superlattices have been studied as a function of the superlattice composition (indices denote the number of atomic layers). Coupled ferromagnetic structures exist in all investigated samples. The phase transition temperature varies with the Tb layer thickness. Modulated magnetic order is short range for all samples beside the Er₂₀|Tb₅ superlattice, the sample with the smallest Tb layer thickness. We observe dipolar antiferromagnetic coupling between single ferromagnetic Tb layers in all samples, with the onset of this ordering depending on the Tb layer thickness. Due to competing interactions, exchange coupling is limited to the interface near region. Therefore long range modulated magnetic order is observed in the Er₂₀|Tb₅ superlattice only, where the interface regions overlap. The distinct differences to the magnetic structure of an Er_0.8Tb_0.2 alloy film are explained by a highly anisotropic arrangement of neighbouring atoms due to the correlated roughness.     

\alpha-decay spectroscopy of light odd-odd Bi isotopes - II: 186Bi and the new nuclide 184Bi

Alpha-decay of the new nuclide ¹⁸⁴Bi has been studied in the complete-fusion reaction ⁹³Nb(⁹⁴Mo, 3n)¹⁸⁴Bi at the velocity filter SHIP. The evaporation residues were separated in-flight and subsequently identified on the basis of recoil- , recoil- - analysis and excitation functions measurements. Two -decaying isomeric states in ¹⁸⁴Bi with half-life values of 13(2) ms and 6.6(1.5) ms were identified. The -branching ratio of ¹⁸⁰Tl was deduced for the first time as . Improved data on the fine-structure -decay of ¹⁸⁶Bi were obtained in the ⁹³Nb(⁹⁵Mo, 2n)¹⁸⁶Bi reaction. A similarity of the decay energies and half-life values of ^184,186Bi is pointed out and a possible explanation for this effect is suggested.Received: 14 March 2003, Revised: 29 April 2003, Published online: 2 September 2003PACS: 23.60.+e decay - 27.70.+q - 27.80.+w K. Heyde: Present address: EP-ISOLDE, CERN, CH-1211, Geneva 23, Switzerland.     

Scaling the $\alpha $-relaxation time of supercooled fragile organic liquids

It was shown recently [1] that the structural -relaxation time of supercooled o-terphenyl depends on a single control parameter , which is the product of a function of density , by the inverse temperature T ^-1. We extend this finding to other fragile glassforming liquids using light scattering data. Available experimental results do not allow to discriminate between several analytical forms of the function , the scaling arising from the separation of density and temperature in . We also propose a simple form for , which depends only on three material-dependent parameters, reproducing relaxation times over 12 orders of magnitude.Received: 16 July 2004, Published online: 23 December 2004PACS: 66.20. + d Viscosity of liquids; diffusive momentum transport - 78.35. + c Brillouin and Rayleigh scattering; other light scattering - 64.70.Pf Glass transitions     

Influence of the growth method upon the phase transition of RbCdCl $\mathsf{_{3}}$

Structural properties of two RbCdCl₃ samples grown either from the melt or from aqueous solution are studied via X-ray diffraction over a closed temperature cycle between 20 C and 300 C. During cooling step (300 C), the crystal grown from the melt undergoes a phase transition at 110 C that drives it from the cubic structure into a tetragonal structure that still persists at 20 C. It undergoes exactly the reverse phase transition at the same temperature during the heating ( C) step that immediately follows. The other crystal grows from aqueous solution at 20 C in an orthorhombic structure (i.e. not tetragonal as that of the crystal grown from the melt and cooled down to this temperature). During the heating ( C) step, it undergoes a direct orthorhombic-cubic phase transition at 240 C (without passing through the tetragonal phase) whereas, during subsequent cooling (300 C), it does not exhibit the corresponding reverse phase transition but rather exhibits exactly the same cubic-tetragonal phase transition at 110 C as the crystal grown from the melt. However, for both crystals, this tetragonal phase observed at room temperature is unstable and slowly converts into an orthorhombic phase over the course of time. Complementary Differential Scanning Calorimetry (D.S.C.) and Thermo Gravimetric Analysis (T.G.A.) measurements have been carried out over the range ( ) C in order to interpret diffraction experiments.Received: 19 May 2004, Published online: 30 September 2004PACS: 61.10.Nz X-ray diffraction - 64.70.Kb Solid-solid transitions - 65.40.Ba Heat capacity     

On the scaling of probability density functions with apparent power-law exponents less than unity

We derive general properties of the finite-size scaling of probability density functions and show that when the apparent exponent of a probability density is less than 1, the associated finite-size scaling ansatz has a scaling exponent τ equal to 1, provided that the fraction of events in the universal scaling part of the probability density function is non-vanishing in the thermodynamic limit. We find the general result that τ≥1 and . Moreover, we show that if the scaling function approaches a non-zero constant for small arguments, , then . However, if the scaling function vanishes for small arguments, , then τ= 1, again assuming a non-vanishing fraction of universal events. Finally, we apply the formalism developed to examples from the literature, including some where misunderstandings of the theory of scaling have led to erroneous conclusions.     

Twist-3 distribution amplitudes of the pion and kaon from the QCD sum rules

Twist-3 distribution amplitudes of the pion and kaon are studied in this paper. We calculate the first several moments for the twist-3 distribution amplitudes ( and ) of the pion and kaon by applying the QCD sum rules. Our results show that (i) the first three moments of and the first two moments of and of the pion and kaon can be obtained with 30 uncertainty; (ii) the fourth moment of the and the second moment of the can be obtained when the uncertainty are relaxed to 35 ; (iii) the fourth moment of the can be obtained only when the uncertainty are relaxed to 40 ; (iv) we have and after including the -corrections to the perturbative part. These moments will be helpful for constructing the twist-3 wave functions of the pion and kaon.Received: 6 January 2005, Revised: 29 March 2005, Published online: 22 June 2005PACS: 13.20.He, 11.55.Hx     

Structural,electronic, and optical properties of beryllium monochalcogenides

The results of first-principles theoretical study of the structural, electronic and optical properties of beryllium monochalcogenides BeTe, BeSe and BeS, performed using the full potential linearized augmented plane wave (FP-LAPW) method are presented. The calculated structural parameters and band gaps compare very well with previous theoretical results. The trends of the band gap pressure coefficients and volume deformation potentials for these II-VI compounds are investigated. The linear pressure coefficients for the X and band gaps increase with decrease in anion atomic weight. The dependence of the direct and indirect band gaps on the relative change of lattice constant are found to follow almost the same type of trends in each of these compounds. The volume deformation potential ( ) for the direct ( ) and indirect ( ) gaps are positive, but negative for the indirect ( ) gap. Furthermore, , for transitions decreases with increase in anion atomic number whereas , increases. The optical properties have also been calculated. From the reflectivity spectra, the compounds will be useful for optical applications. The variation of the band gaps with respect to the application of pressure and the origin of some of the peaks in the optical spectra are discussed in terms the calculated electronic structure.Received: 26 September 2003, Published online: 18 June 2004PACS: 71.15.Ap Basis sets (LCAO, plane-wave, APW, etc.) and related methodology (scattering methods, ASA, linearized methods, etc.) - 71.15.Mb Density functional theory, local density approximation, gradient and other corrections - 71.20.Nr Semiconductor compounds     

The effect of mixture lengths of vehicles on the traffic flow behaviour in one-dimensional cellular automaton

The effect of mixture lengths of vehicles on the asymmetric exclusion model is studied using numerical simulations for both open and periodic boundaries in deterministic parallel dynamics. The vehicles are filed according to their length, the small cars type 1 occupy one cell whereas the big ones type 2 takes two. In the case of open boundaries two cases are presented. The first case corresponds to a chain with two entries where densities are calculated as a function of the injecting rates and of vehicles type 1 and type 2 respectively, and the phase diagram ( ) is presented for a fixed value of the extracting rate . In this situation the first order transition from low to high density phases occurs at and disappears for . The second case corresponds to a chain with one entry, where is the injecting rate of vehicles independent of their nature. Type 2 are injected with the conditional probability , where and n is the concentration of type 2. Densities are calculated as a function of the injecting rates , and the phase diagrams ( , ) are established for different values of n. In this situation the gap which is a characteristic of the first order transition vanishes with increasing for . However, the first order transition between high and low densities exhibit an end point above which the global density undergoes a continuous passage. The end point coordinate depends strongly on the value of n. In the periodic boundaries case, the presence of vehicles type 2 in the chain leads to a modification in the fundamental diagram (current, density). Indeed, the maximal current value decreases with increasing the concentration of vehicles type 2, and occurs at higher values of the global density.Received: 13 May 2004, Published online: 3 August 2004PACS: 05.50. + q Lattice theory and statistics (Ising, Potts, etc.) - 64.60.Cn Order-disorder transformations; statistical mechanics of model systems - 75.30.Kz Magnetic phase boundaries (including magnetic transitions, metamagnetism, etc.) - 82.20.Wt Computational modeling; simulation     

Packet transport along the shortest pathways in scale-free networks

We investigate a problem of data packet transport between a pair of vertices on scale-free networks without loops or with a small number of loops. By introducing load of a vertex as accumulated sum of a fraction of data packets traveling along the shortest pathways between every pair of vertices, it is found that the load distribution follows a power law with an exponent . It is found for the Barabási-Albert-type model that the exponent changes abruptly from for tree structure to as the number of loops increases. The load exponent seems to be insensitive to different values of the degree exponent as long as .Received: 4 February 2004, Published online: 14 May 2004PACS: 89.75.Fb Structures and organization in complex systems - 05.65. + b Self-organized systems - 02.10.Ox Combinatorics; graph theory     

A statistical mechanics model of isotropic turbulence well-defined within the context of the $\mathsf{\epsilon}$ expansion

A statistical mechanics model of isotropic turbulence that renormalizes the effects of turbulent stresses into a velocity-gradient-dependent random force term is introduced. The model is well-defined within the context of the renormalization group expansion, as the effective expansion parameter is . The Kolmogorov constant and N parameter of turbulence are of order unity, in accord with experimental results. Nontrivial intermittency corrections to the single-time structure functions are calculated as a controlled expansion in .Received: 20 December 2002, Published online: 23 July 2003PACS:   47.27.Ak Fundamentals - 47.27.Gs Isotropic turbulence; homogeneous turbulence - 05.10.Cc Renormalization group methods