1,3,5-Trideoxy-1,3,5-tris(dimethylamino)-cis-inositol,an Efficient Ligand for Hard Trivalent Metal Ions. Determination of the stability constants of the FeIII,AlIII, and CuII complexes in aqueous solution

The complexes [Fe(tdci)₂]Cl₃ and [Al(tdci)₂]Cl₃ (tdci = 1,3,5-trideoxy-1,3,5-tris(dimethylamino)-cis-inositol) were prepared and characterized by mass spectrometry, NMR spectroscopy, and magnetic-susceptibility measurements. The formation constants were determined in aqueous solution (25°, 0.1M KCl) by potentiometric titration. pK values of H₃(tdci)³⁺: 5.89, 7.62, 9.68; Fe^III complexes: log β_ML = 18.8, log β = 32.6; Al^III complexes: log β_ML = 14.3, logβ = 26.4. The protonated complex [FeH(tdci)₂]⁴⁺ has also been identified. In contrast to the high stability of the Fe^III and Al^III complexes, only weak interactions of tdci with Cu^II have been observed in aqueous solution (25°, 0.1M KNO₃).     

1,3,5-Triamino-1,3,5-trideoxy-cis-inositol,a New Ligand with a Remarkable Versatility for Metal Ions. Part 2. Safe and efficient ligand preparation and structure of the free ligand and the CoIII complex

A new, convenient, and safe route to 1,3,5-triamino-1,3,5-trideoxy-cis-inositol (taci) was investigated by hydrogenation of azo-coupled derivatives of phloroglucinol. In the presence of acetic anhydride, the reduction of trisphenylazophloroglucinol (H₂/Pd(5%) on C) resulted in the formation of tri-, hexa-, and nona-acetylated derivatives of triaminophloroglucinol. All three compounds are air-stable, colorless solids. However, the succeeding hydrogenation to the cyclohexane derivative failed. Trisodiumtris(p-sulfonatophenylazo)phloroglucinol could be hydrogenated in a one-pot reaction to the desired taci· 1.5H₂SO₄ using a Pt/Rh oxide as catalyst. taci provides two distinct chair conformations with either three amino or three hydroxy groups for metal binding. The unique metal-binding properties are discussed in terms of minimal conformational changes required for coordination. Conformational analysis, based on X-ray structural data of [BiCl₆][H₃(taci)] ·2 H₂O (Pnma, a = 24.314 (5) Å, b = 10.215 (2) Å, c = 7.422 (8) Å, R = 5.8%) and [Co(taci)₂(NO₃)₃]·2H₂O (C2/c, a = 22.912 (8) Å, b = 8.942 (2) Å, c = 14.731 (3) Å, β = 128.66 (2)°, R = 4.9%) and the previously investigated [Cr(taci)₂]³⁺ revealed an almost ideal chair conformation in all three molecules.     

Protolytic properties and complexation with copper(II) ions of some azo derivatives of β-arylaminopropionic acids

The azo coupling reaction of N-(2-carboxyethyl)anthranilic acid and N,N,N′,N′-tetrabis(2-carboxyethyl)-1,3-phenylenediamine with diazosulfanilic acid yielded the complexones sodium 4-N-(2-carboxyethyl)amino-5-carboxyazobenzene-4′-sulfonate (I) and 2,4-N,N,N′,N′-tetrabis(2-carboxyethyl)diaminoazobenzene-4′-sulfonic acid (II), respectively. The acidity constants of I and II (20°C, μ = 0.1M KCl) were determined to be as follows: for I, pK ₀₀ = 1.29 ± 0.13, pK ₀ = 2.92 ± 0.07, pK ₁ = 3.92 ± 0.05, pK ₂ = 5.16 ± 0.03; for II, pK ₀₀ = 2.35 ± 0.06, pK ₀ = 2.81 ± 0.09, pK ₁ = 3.21 ± 0.11, pK ₂ = 3.81 ± 0.09, pK ₃ = 4.34 ± 0.04, pK ₄ = 5.03 ± 0.06, pK ₅ = 6.67 ± 0.07. The electronic absorption spectra of I and II were measured, and acid-base equilibrium scheme for I and II in aqueous solutions were suggested. The complexation constants of I and II with copper(II) ions were determined to be logK _CuQ^I= 5.47 ± 0.06 and logK _CuQ^II= 5.72 ± 0.13 (20°C, μ = 0.1 M KCl).     

Synthesis and X-ray molecular structure of cis,cis-1,3,5-Tris(diphenylphosphino)- 1,3,5-tris(methoxycarbonyl) cyclohexane

The novel tripodal phosphine ligand cis, cis-1,3,5-tris(diphenylphosphino)-1,3,5-tris(methoxycarbonyl)cyclohexane (tdppcyme) (2) has been synthesized. ¹H, ¹³C and ³¹P NMR spectroscopy shows that in solution the sterically demanding diphenylphosphine groups occupy equatorial positions on the cyclohexane ring. An X-ray crystal investigation confirms this result for the solid state. Treatment of tdppcyme with Mo(η⁶-C₇H₈)(CO)₃ gives Mo(tdppcyme)(CO)₃ (3), with octahedral molybdenum coordination.     

Perfluoro-1,3,5-tris(p-oligophenyl)benzenes: Amorphous Electron-Transport Materials with High-Glass-Transition Temperature and High Electron Mobility

Perfluoro-1,3,5-tris(p-quaterphenyl)benzene (PF-13Y) and perfluoro-1,3,5-tris(p-quinquephenyl)benzene (PF-16Y) have been synthesized and characterized. They showed higher glass transition temperatures compared with perfluoro-1,3,5-tris(p-terphenyl)benzene (PF-10Y). Organic light-emitting diodes were fabricated using these materials as the electron-transport layers. PF-13Y and -16Y are better electron transporters than PF-10Y. The electron mobilities of PF-10Y and Alq₃ were measured by the time-of-flight technique. PF-10Y showed higher electron mobilities (10⁻⁴ cm²/V s) and weaker electric field dependence compared with Alq₃.     

Regioselective O-acylation of myo-inositol 1,3,5-orthoesters: dependence of regioselectivity on the stoichiometry of the base

A metal mediated unusual 1-3 acyl migration from C4-O to C2-OH of myo-inositol 1,3,5-orthoformate was observed during the alkylation of racemic 4-O-benzoyl-myo-inositol 1,3,5-orthoformate. This has been exploited for the selective esterification of either the C4(6)-OH or the C2-OH of myo-inositol by varying the amount of the base used. While the use of 1 equiv of the base (sodium hydride or potassium tert-butoxide) for the acylation of myo-inositol orthoesters gives the corresponding C4-ester exclusively, the use of two or more equivalents of base for the same reaction gives the C2-ester exclusively. The relatively higher stability of the alkoxide of racemic 2-O-acyl-myo-inositol 1,3,5-orthoester as compared to the alkoxide of 4-O-acyl-myo-inositol 1,3,5-orthoester is suggested to be responsible for the observed isomerization.     

Kinetics of hydroxyl radical reactions with formaldehyde and 1,3,5-trioxane between 290 and 600 K

Absolute rate constants are measured for the reactions: OH + CH₂O, over the temperature range 296–576 K and for OH + 1,3,5-trioxane over the range 292–597 K. The technique employed is laser photolysis of H₂O₂ or HNO₃ to produce OH, and laser-induced fluorescence to directly monitor the relative OH concentration. The results fit the following Arrhenius equations: k (CH₂O) = (1.66 ± 0.20) × 10^?11 exp[?(170 ± 80)/RT] cm³ s^?1 and k(1,3,5-trioxane) = (1.36 ± 0.20) × 10^?11 exp[?(460 ± 100)/RT] cm³ s^?1. The transition-state theory is employed to model the OH + CH₂O reaction and extrapolate into the combustion regime. The calculated result covering 300 to 2500 K can be represented by the equation: k(CH₂O) = 1.2 × 10^?18 T^2.46 exp(970/RT) cm³ s^?1. An estimate of 91 ± 2 kcal/mol is obtained for the first C? H bond in 1,3,5-trioxane by using a correlation of C? H bond strength with measured activation energies.     

Kinetics of the reactions of O3 and OH radicals with a series of dialkenes and trialkenes at 294 ± 2 K

Rate constants for the gas phase reactions of O₃ and OH radicals with 1,3-cycloheptadiene, 1,3,5-cycloheptatriene, and cis- and trans-1,3,5-hexatriene and also of O₃ with cis-2,trans-4-hexadiene and trans -2,trans -4-hexadiene have been determined at 294 ± 2 K. The rate constants determined for reaction with O₃ were (in cm³ molecule^-1s^?1 units): 1,3-cycloheptadiene, (1.56 ± 0.21) × 10^-16; 1,3,5-cycloheptatriene, (5.39 ± 0.78) × 10^?17; 1,3,5-hexatriene, (2.62 ± 0.34) × 10^?17; cis?2,trans-4-hexadiene, (3.14 ± 0.34) × 10^?16; and trans ?2, trans -4-hexadiene, (3.74 ± 0.61) × 10^?16; with the cis- and trans-1,3,5-hexatriene isomers reacting with essentially identical rate constants. The rate constants determined for reaction with OH radicals were (in cm³ molecule^?1 s^?1 units): 1,3-cycloheptadiene, (1.31 ± 0.04) × 10^?10; 1,3,5-cycloheptatriene, (9.12 × 0.23) × 10^?11; cis-1,3,5-hexatriene, (1.04 ± 0.07) × 10^?10; and trans 1,3,5-hexatriene, (1.04 ± 0.17) × 10^?10. These data, which are the first reported values for these di- and tri-alkenes, are discussed in the context of previously determined O₃ and OH radical rate constants for alkenes and cycloalkenes.     

A potassium–18-crown-6 salt of a cyclic myo-inositol phosphate

The six-membered phosphorinane ring in (1,4,7,10,13,16-hexaoxa­cyclo­octa­decane)­potassium 2-O-benzoyl-1,3,5-O-methyl­idyne-myo-in­osi­tol 4,6-cyclo­phosphate trihydrate, [K(C₁₂H₂₄O₆)](C₁₄H₁₂O₉P)·3H₂O, has a boat rather than a chair conformation. The K⁺ ion is eight-coordinate and is connected to one of the phosphate O atoms, one of the O atoms of the myo-inositol residue and the six O atoms of the crown ether.     

Synthesis and spectroscopic characterization of palladium(II) complexes with 6,8-dimethylimidazo[1,5- a ]-1,3,5-triazin-4( 3H )-one and 6,8-dimethyl-2-thioxo-2,3-dihydroimidazo-[1,5- a ]-1,3,5-triazin-4( 1H )-one

The preparation and spectroscopic study (¹H, ¹³C, ¹⁵NNMR, ¹³CP MAS NMR, IR) of new Pd^II complexes with 6,8-dimethylimidazo[1,5-a]-1,3,5-triazin-4(3H)-one (6,8-DiMe-4-O-IMT) (1) and 6,8-dimethyl-2-thioxo-2,3-dihydroimidazo[1,5-a]-1,3,5-triazin-4(1H)-one (6,8-DiMe-4-O-2-S-IMT) (2) is reported. The spectroscopic data indicate a square planar geometry with two N(7) bonded heterocycles and two cis-chloride anions. The final product of the thermal decomposition of cis-PdCl₂(6,8-DiMe-4-O-IMT)₂ (3) is metallic Pd, whereas for cis-PdCl₂(6,8-DiMe-4-O-2-S-IMT)₂ (4) it is metallic Pd plus C.     

Highly substituted cyclohexanes: strong proximity effects influence synthetic access to 1,3,5-tris(bromomethyl)-1,3,5-trialkylcyclohexanes (alkyl = methyl, n-propyl)

1,3,5-Tris(bromomethyl)-1,3,5-trialkylcyclohexanes (alkyl = methyl, n-propyl) were prepared. These are the first examples of 1,3,5-tris(halomethyl)-1,3,5-trialkylcyclohexanes. One synthetic method directly converted the corresponding triols with PPh₃Br₂, where an excess of the bromination reagent and high temperature (175 °C) were required. Stoichiometric use of PPh₃Br₂ under mild conditions, successfully employed for the synthesis of the parent tris(bromomethyl)cyclohexane, did not lead to the desired tribromides but rather to cyclic ethers. Proximity effects triggered by the 1,3,5-alkyl groups strongly influence the reactivity of such highly substituted cyclohexanes. An alternative synthetic access to the tris(bromomethyl) compounds was also developed, using 1,3,5-tris(triflatomethyl)-1,3,5-trialkylcyclohexanes (triflato = F₃CSO₃) as synthetic intermediates. An X-ray crystal structure of 1,3,5-tris(bromomethyl)-1,3,5-trimethylcyclohexane was obtained.     

Hydrogen bonding in polyamino‐polyalcohols: a monohydrated cocrystal of 1,3‐diamino‐5‐azaniumyl‐1,3,5‐trideoxy‐cis‐inositol iodide and 1,3,5‐triamino‐1,3,5‐trideoxy‐cis‐inositol

In the title monohydrated cocrystal, namely 1,3‐diamino‐5‐azaniumyl‐1,3,5‐trideoxy‐cis‐inositol iodide–1,3,5‐triamino‐1,3,5‐trideoxy‐cis‐inositol–water (1/1/1), C₆H₁₆N₃O₃⁺·I⁻·C₆H₁₅N₃O₃·H₂O, the neutral 1,3,5‐triamino‐1,3,5‐trideoxy‐cis‐inositol (taci) molecule and the monoprotonated 1,3‐diamino‐5‐azaniumyl‐1,3,5‐trideoxy‐cis‐inositol cation (Htaci⁺) both adopt a chair conformation, with the three O atoms in axial and the three N atoms in equatorial positions. The cation, but not the neutral taci unit, exhibits intramolecular O—H...O hydrogen bonding. The entire structure is stabilized by a complex three‐dimensional network of intermolecular hydrogen bonds. The neutral taci entities and the Htaci⁺ cations are each aligned into chains along [001]. In these chains, two O—H...N interactions generate a ten‐membered ring as the predominant structural motif. The rings consist of vicinal 2‐amino‐1‐hydroxyethylene units of neighbouring molecules, which are paired via centres of inversion. The chains are interconnected into undulating layers parallel to the ac plane, and the layers are further held together by O—H...N hydrogen bonds and additional interactions with the iodide counter‐anions and solvent water molecules.     

Spectrophotometric and Potentiometric Studies on the Binding Abilities of Two Novel Tripodal Imine-Phenol Ligands Towards Al(III) and Ga(III)

The aqueous coordination behavior of two novel tripodal imine-phenol ligands, cis,cis-1,3,5-tris{(2-hydroxybenzilidene)aminomethyl}cyclohexane (TMACHSAL, L¹) and cis,cis-1,3,5-tris{[(2-hydroxyphenyl)ethylidene]aminomethyl}cyclohexane (Me₃- TMACHSAL, L²) with Al³⁺ and Ga³⁺ has been investigated at an ionic strength of 0.1 mol⋅dm⁻³ KCl and 25±1 °C by potentiometric and spectrophotometric methods. Both ligands formed various monomeric metal complex species MLH₃, MLH₂, MLH, ML and MLH₋₁ with Ga(III); and MLH₃, ML and MLH₋₁ with Al(III). The Ga(III) complexes showed higher thermodynamic stability than the Al(III) complexes. Semi-empirical PM6 calculations along with TDDFT/B3LYP/3-21G calculations have been performed to complement the experimental measurements. The calculated structure of the metal complexes predicted a distorted octahedral geometry where favorable ring-flipping from the equatorial conformation in uncomplexed ligands to the axial conformation was observed upon chelation.     

Spectroscopic study of protonation of oligonucleotides containing adenine and cytosine

Acidobasic properties of purine and pyrimidine bases (adenine, cytosine) and relevant nucleosides (adenosine, cytidine) were studied by means of glass-electrode potentiometry and the respective dissociation constants were determined under given experimental conditions (I = 0.1 M (NaCl), t = (25.0 ± 0.1) °C): adenine (pK _HL = 9.65 ± 0.04, pK _H2L = 4.18 ± 0.04), adenosine (pK _H2L = 3.59 ± 0.05), cytosine (pK _H2L = 4.56 ± 0.01), cytidine (pK _H2L = 4.16 ± 0.02). In addition, thermodynamic parameters for bases: adenine (ΔH ⁰ = (−17 ± 4) kJ mol⁻¹, ΔS ⁰ = (23 ± 13) J K⁻¹ mol⁻¹), cytosine (ΔH ⁰ = (−22 ± 1) kJ mol⁻¹, ΔS ⁰ = (13 ± 5) J K⁻¹ mol⁻¹) were calculated. Acidobasic behavior of oligonucleotides (5′CAC-CAC-CAC3′ = (CAC)₃, 5′AAA-CCC-CCC3′ = A₃C₆, 5′CCC-AAA-CCC3′ = C₃A₃C₃) was studied under the same experimental conditions by molecular absorption spectroscopy. pH-dependent spectral datasets were analyzed by means of advanced chemometric techniques (EFA, MCR-ALS) and the presence of hemiprotonated species concerning (C⁺-C) a non-canonical pair (i-motif) in titled oligonucleotides was proposed in order to explain experimental data obtained according to literature.     

Formation of lithium,sodium and potassium complexes with 1,3,5‐triamino‐1,3,5‐trideoxy‐cis‐inositol (taci)

Single crystals of (1,3‐diamino‐5‐azaniumyl‐1,3,5‐trideoxy‐cis‐inositol‐κ³O²,O⁴,O⁶)(1,3,5‐triamino‐1,3,5‐trideoxy‐cis‐inositol‐κ³O²,O⁴,O⁶)lithium(I) diiodide dihydrate, [Li(C₆H₁₆N₃O₃)(C₆H₁₅N₃O₃)]I₂·2H₂O or [Li(Htaci)(taci)]I₂·2H₂O (taci is 1,3,5‐triamino‐1,3,5‐trideoxy‐cis‐inositol), (I), bis(1,3,5‐triamino‐1,3,5‐trideoxy‐cis‐inositol‐κ³O²,O⁴,O⁶)sodium(I) iodide, [Na(C₆H₁₅N₃O₃)₂]I or [Na(taci)₂]I, (II), and bis(1,3,5‐triamino‐1,3,5‐trideoxy‐cis‐inositol‐κ³O²,O⁴,O⁶)potassium(I) iodide, [K(C₆H₁₅N₃O₃)₂]I or [K(taci)₂]I, (III), were grown by diffusion of MeOH into aqueous solutions of the complexes. The structures of the Na and K complexes are isotypic. In all three complexes, the taci ligands adopt a chair conformation with axial hydroxy groups, and the metal cations exhibit exclusive O‐atom coordination. The six O atoms of the resulting MO₆ unit define a centrosymmetric trigonal antiprism with approximate D_3d symmetry. The interligand O...O distances increase significantly in the order Li < Na < K. The structure of (I) exhibits a complex three‐dimensional network of R—NH₂—H...NH₂—R, R—O—H...NH₂—R and R—O—H...O(H)—H...NH₂—R hydrogen bonds. The structures of the Na and K complexes consist of a stack of layers, in which each taci ligand is bonded to three neighbours via pairwise O—H...NH₂ interactions between vicinal HO—CH—CH—NH₂ groups.     

Enzyme-Mediated Preparation of (+)- and (–)-cis-α-Irone and (+)- and (–)-trans-α-Irone

The preparation of (−)- and (+)-trans-α-irone ( 1a and 1b , resp.) and of (+)- and (−)-cis-α-irone ( 1c and 1d , resp.) from commercially available Irone alpha ^® is reported. The relevant step in the synthetic sequence is the initial chromatographic separation of crystalline (±)-4,5-epoxy-4,5-dihydro-cis-α-irone ((±)- 5 ) from oily (±)-4,5-epoxy-4,5-dihydro-trans-α-irone ((±)- 4 ). The latter was subsequently converted, after NaBH₄ reduction, into the crystalline 3,5-dinitrobenzoate ester (±)- 8 , thus allowing a complete separation of the two corresponding diastereoisomeric alcohol derivatives. Suitable enantiomerically pure precursors of the desired products 1a – d were obtained by kinetic resolution of the racemic allylic alcohols derived from (±)- 5 and (±)- 8 , mediated by lipase PS (Amano). The last steps consisted of MnO₂ oxidation and removal of the epoxy moiety with Me₃SiCl/NaI in MeCN. External panel olfactory evaluation showed that (−)-cis-α-irone ( 1d ) has the finest and most distinct `orris butter' character.     

Hydrogen Ion Affinity in Humic Acids: A Coordination Approach

Potentiometric titrations of humic acids (HA) with 0.250 M Ba(OH)₂/BaCl₂ titrant (0.750 M constant ionic strength), have been performed at 25 ± 0.1°C with a calibrated glass electrode for measuring p[H⁺]. The pK′_w for water in this BaCl₂ medium is 12.899 ± 0.006 and 13.712 ± 0.006 in 0.500 M NaCl. Divalent Ba²⁺ cations force the ionization of the acid groups and improve solubility. Under such conditions derivative potentiometric curves show diverse equivalent peaks of the acidic sites of HA. The presence of 0.05% of a neutral detergent such as Triton X-100 is essential for effective dispersion of HA in the working solutions and to obtain very stable potentiometric measurements. Computer programs were used in the treatment of the potentiometric data in order to solve a number of simultaneous equations to obtain overall conditional β _{i H} formation constants, which come from a coordination model of hydrogen ions to the organic matrix and permit calculation of conditional pK data. Conductimetric titrations with Ba(OH)₂ or NaOH give the total acidity. A typical result in BaCl₂ medium for a peat HA presents seven acid groups with the following pK data: pK ₁ = 3.80 ± 0.3, pK ₂ = 4.67 ± 0.02, pK ₃ = 7.57 ± 0.01, pK ₄ = 8.190 ± 0.005, pK ₅ = 8.80 ± 0.01, pK ₆ = 8.91 ± 0.02, and pK ₇ = 8.93 ± 0.01.     

Synthesis of partially bio-based triepoxides from naturally occurring myo-inositol and their polyadditions

Partially bio-based triepoxides, 1,3,5-tri-O-methyl-2,4,6-tri-O-(oxiran-2-yl-methyl)-myo-inositol ( 4 ) and 2,4,6-tri-O-(oxiran-2-yl-methyl)-myo-inositol 1,3,5-orthoacetate ( 5 ), were synthesized from naturally occurring myo-inositol. These two triepoxides differ from each other in terms of rigidity of the core structure; while the former triepoxide has a more flexible cyclohexane core, the latter has a highly rigid adamantane-like orthoester core. Triepoxide 5 readily reacted with nucleophilic monomers such as diamines, dithiol, and trithiol to yield networked polymers. The glass transition temperatures (T_gs) of these polymers were higher than those of comparable networked polymers obtained by the polyaddition of triepoxide 4 with the same nucleophilic monomers, implying that the rigidity of the orthoester moiety contributed to the efficient restriction of the polymer chain in the synthesized networked polymers.     

Trisubstituted 1,3,5-Triazines. 6. Synthesis of 2,4,6-Tris(acetonyl)-1,3,5-triazine

Acylation of 2,4,6-tris(tert-butoxycarbonylmethyl)-1,3,5-triazine with acetic anhydride in the presence of lithium hydride with subsequent removal of the tert-butoxycarbonyl groups with trifluoroacetic acid leads to 2,4,6-tris(acetonyl)-1,3,5-triazine, the cyclic analog of -cyanoacetone. The special spectral features of this compound compared with triazines obtained previously are discussed.     

A Conformational Study of Cyclohexane‐1,3,5‐tricarbonitrile Derivatives

Cyclohexane‐1,3,5‐tricarbonitrile reached equilibrium having 1,3‐cis‐1,5‐cis and 1,3‐cis‐1,5‐trans isomers in a ratio of 3:7. The cis, cis‐isomer preferred the conformation with three equatorial cyano groups, where as the cis, trans‐isomer displayed two cyano groups on equatorial positions and another cyano group on axial position. Condensation of cis, cis‐cyclohexane‐1,3,5‐tricarbonitrile with L‐(S)‐valinol by the catalysis of ZnCl₂ in refluxing 1,2‐dichlorobenzene afforded two isomeric cyclohexane‐1,3,5‐trioxazolines in favor of the 1,3‐cis‐1,5‐trans isomer. Metalation of cis, cis‐cyclohexane‐1,3,5‐tricarbonitrile, followed by alkylations with dimethyl sulfate, benzyl bromide or allyl bromide, gave the cor responding trialkylation products with predominance of 1,3‐cis‐1,5‐trans isomers. The cis, trans‐isomer showed two cyano groups on axial positions and another cyano group on equatorial position, where as the cis, cis‐isomer exhibited three axial cyano groups. Treatment of trimethyl cis, cis‐cyclohexane‐1,3,5‐tricarboxylate with lithium diisopropylamide and dimethyl sulfate afforded mainly the trimethyl ester of Kemp's triacid, which showed three axial carboxylate groups. Two competitive factors, i.e. the steric effect of in coming electrophiles and the dipole‐dipole inter actions of the cyano or carboxylate groups, might inter play to give different stereoselectivities in these reaction systems.