Degradation of kinetically-stable o/w emulsions

This article summarizes the studies on the degradation of the thermodynamically unstable o/w (nano)emulsion--a dispersion of one liquid in another, where each liquid is immiscible, or poorly miscible in the other. Emulsions are unstable exhibiting flocculation, coalescence, creaming and degradation. The physical degradation of emulsions is due to the spontaneous trend toward a minimal interfacial area between the dispersed phase and the dispersion medium. Minimizing the interfacial area is mainly achieved by two mechanisms: first coagulation possibly followed by coalescence and second by Ostwald ripening. Coalescence is often considered as the most important destabilization mechanism leading to coursing of dispersions and can be prevented by a careful choice of stabilizers. The molecular diffusion of solubilizate (Ostwald ripening), however, will continuously occur as soon as curved interfaces are present. Mass transfers in emulsion may be driven not only by differences in droplet curvatures, but also by differences in their compositions. This is observed when two or more chemically different oils are emulsified separately and the resulting emulsions are mixed. Compositional ripening involves the exchange of oil molecules between emulsion droplets with different compositions. The stability of the electrostatically- and sterically-stabilized dispersions can be controlled by the charge of the electrical double layer and the thickness of the droplet surface layer formed by non-ionic emulsifier. In spite of the similarities between electrostatically- and sterically-stabilized emulsions, there are large differences in the partitioning of molecules of ionic and non-ionic emulsifiers between the oil and water phases and the thickness of the interfacial layers at the droplet surface. The thin interfacial layer (the electrical double layer) at the surface of electrostatically stabilized droplets does not create any steric barrier for mass transfer. This may not be true for the thick interfacial layer formed by non-ionic emulsifier. The interactive sterically-stabilized oil droplets, however, can favor the transfer of materials within the intermediate agglomerates. The stability of electrosterically-stabilized emulsion is controlled by the ratio of the thickness of the non-ionic emulsifier adsorption layer (delta) to the thickness of the electrical double layer (kappa(-1)) around the oil droplets (delta/(kappa(-1))) = (deltakappa). The monomer droplet degradation can be somewhat depressed by transformation of coarse emulsions to nano-emulsion (miniemulsion) by intensive homogenization and by the addition of a surface active agent (coemulsifier) or/and a water-insoluble compound (hydrophobe). The addition of hydrophobe (hexadecane) to the dispersed phase significantly retards the rate of ripening. A long chain alcohol (coemulsifier) resulted in a marked improvement in stability, as well, which was attributed to a specific interaction between alcohol and emulsifier and to the alcohols tendency to concentrate at the o/w interface to form stronger interfacial film. The rate of ripening, according to the Lifshitz-Slyozov-Wagner (LSW) model, is directly proportional to the solubility of the dispersed phase in the dispersion medium. The increased polarity of the dispersed phase (oil) decreases the stability of the emulsion. The molar volume of solubilizate is a further parameter, which influences the stability of emulsion or the transfer of materials through the aqueous phase. The interparticle interaction is expected to favor the transfer of solubilizate located at the interfacial layer. The kinetics of solubilization of non-polar oils by ionic micelles is strongly related to the aqueous solubility of the oil phase (the diffusion approach), whilst their solubilization into non-ionic micelles can be contributed by interparticle collisions.     

Double phase inversion of emulsions containing layered double hydroxide particles induced by adsorption of sodium dodecyl sulfate

A liquid paraffin-water emulsion was investigated using layered double hydroxide (LDH) particles and sodium dodecyl sulfate (SDS) as emulsifiers. Both emulsifiers are well-known to stabilize oil-in-water (o/w) emulsions. Surprisingly, a double phase inversion of the emulsion containing LDH particles is induced by the adsorption of SDS. At a constant LDH concentration, the emulsion is o/w type when SDS concentrations are low. At intermediate SDS concentrations, the first emulsion inversion from o/w to w/o occurs, which is attributed to the enhanced hydrophobicity of LDH particles caused by the desorption of the second layer of surfactant, leaving a densely packed SDS monolayer on the LDH exterior surfaces. The second inversion from water-in-oil (w/o) to o/w occurs at higher SDS concentrations, which may be due to the competitive adsorption at the oil/water interfaces between the LDH particles modified by the SDS bilayers and the free SDS molecules in the bulk solution, but the free SDS molecules dominate and determine the emulsion type. Laser-induced fluorescent confocal micrographs clearly confirm the adsorption of LDH particles on the surfaces of the initial o/w and intermediate w/o emulsion droplets, whereas no LDH particles were adsorbed on the final o/w emulsion droplet surfaces. Also, transmission electron microscopy (TEM) observations indicate that the shape of the final o/w emulsions is similar to that of the monomeric SDS-stabilized emulsion but different from that of the initial o/w emulsions. The adsorption behavior of SDS on LDH particles in water was investigated to offer an explanation for the emulsion double phase inversion. The zeta potential results show that the particles will flocculate first and then redisperse following surfactant addition. Also, X-ray diffraction (XRD) measurements indicate that SDS adsorption on the LDH interior surfaces will be complete at intermediate concentrations.     

Fractional crystallization of oil droplets in O/W emulsions dispersed by Synperonic F127

The aim of this works is to study an oil-in-water emulsion stabilized with a triblock copolymer Synperonic F127 which presents a double size distribution of oil droplets. The emulsions were studied experimentally by means of differential scanning calorimetry (DSC) and dynamic light scattering (DLS). The DSC analysis was carried out focusing on the cooling behavior of the emulsion. The cooling thermograms of the oil-in-water emulsion revealed two crystallization peaks with Gaussian profile; the interesting characteristic is that both peaks are separated in temperature. In accordance to previous works for a single oil dispersed within an aqueous phase, the DSC technique must show a single Gaussian peak of crystallization attributable to a size distribution of droplets. In the present case of emulsions stabilized with 1 g/L of Synperonic F127, the aggregation behavior of triblock as a function of temperature allows to produce an emulsion with a double size droplet distribution. Comparison with emulsions stabilized with 2 and 4 wt% of non-ionic Tween 20 are also presented.     

Double inversion of emulsions induced by salt concentration

The effects of salt on emulsions containing sorbitan oleate (Span 80) and Laponite particles were investigated. Surprisingly, a novel double phase inversion was induced by simply changing the salt concentration. At fixed concentration of Laponite particles in the aqueous phase and surfactant in paraffin oil, emulsions are oil in water (o/w) when the concentration of NaCl is lower than 5 mM. Emulsions of water in oil (w/o) are obtained when the NaCl concentration is between 5 and 20 mM. Then the emulsions invert to o/w when the salt concentration is higher than 50 mM. In this process, different emulsifiers dominate the composition of the interfacial layer, and the emulsion type is correspondingly controlled. When the salt concentration is low in the aqueous dispersion of Laponite, the particles are discrete and can move to the interface freely. Therefore, the emulsions are stabilized by particles and surfactant, and the type is o/w as particles are in domination. At intermediate salt concentrations, the aqueous dispersions of Laponite are gel-like, the viscosity is high, and the transition of the particles from the aqueous phase to the interface is inhibited. The emulsions are stabilized mainly by lipophilic surfactant, and w/o emulsions are obtained. For high salt concentration, flocculation occurs and the viscosity of the dispersion is reduced; thus, the adsorption of particles is promoted and the type of emulsions inverts to o/w. Laser-induced fluorescent confocal micrographs and cryo transmission electron microscopy clearly confirm the adsorption of Laponite particles on the surface of o/w emulsion droplets, whereas the accumulation of particles at the w/o emulsion droplet surfaces was not observed. This mechanism is also supported by the results of rheology and interfacial tension measurements.     

Creaming Stability of Flocculated Monodisperse Oil-in-Water Emulsions

The influence of droplet flocculation on the creaming stability of monodisperse n-hexadecane oil-in-water emulsions was studied. The creaming velocity of emulsions with different droplet radii (0.43 and 0.86 μm), droplet concentrations (1-67 vol%), and sodium dodecyl sulfate (SDS) concentrations (7-80 mM) were measured. Depletion flocculation was observed in the emulsions when the aqueous phase SDS concentration exceeded a particular level ( approximately 40 mM for 0.43-μm droplets and approximately 15 mM for 0.86-μm droplets). Creaming was monitored by measuring the back-scattered light from an emulsion as a function of its height. The creaming velocity increased with increasing flocculation and decreased with increasing droplet concentration. These results have important implications for the formulation of emulsion-based materials. Copyright 2000 Academic Press.     

Effect of oil phase transition on freeze/thaw-induced demulsification of water-in-oil emulsions

Recently, there has been an increasing interest in the breakage of water-in-oil (W/O) emulsions by the freeze/thaw method. Most of the previous works focused on the phase transition of the water droplet phase. This paper emphasizes the effect of continuous oil phase transition. A series of oils with different freezing points were used as oil phases to produce model emulsions, which were then frozen and thawed. The emulsion whose oil phase froze before the water droplet phase did (OFBW) on cooling was readily demulsified with a dewatering ratio as high as over 80%, but the emulsion whose oil phase did not freeze when the water droplet phase did (NOFBW) was relatively hard to break. The difference in demulsification performance between them resulted from the distinction between their demulsification mechanisms via the analyses of the emulsion stability, emulsion crystallization/melting behaviors, oil phase physical properties, and wettability of the frozen oil phase, etc. For the OFBW emulsion, the first-frozen oil phase was ruptured by the volume expansion of the subsequently frozen droplet phase, and meanwhile, some liquid droplet phase was drawn into the fine gaps/crevices of the frozen oil phase to bridge droplets, which were considered to be essential to the emulsion breakage, whereas for the NOFBW emulsion, the demulsification was attributed to the collision mechanism proposed in our previous work. The findings may provide some criteria for selecting a proper oil phase in the emulsion liquid membrane (ELM) process and then offer an alternative approach to recycle the oil phase for continuous operation. This work may also be useful for emulsion stability against temperature cycling.     

Effect of Emulsifier Type on the Characterization of O/W Emulsions Using a Spectroscopy Technique

The droplet size distribution (DSD) of emulsions is the result of two competitive effects that take place during emulsification process, i.e., drop breakup and drop coalescence, and it is influenced by the formulation and composition variables, i.e., nature and amount of emulsifier, mixing characteristics, and emulsion preparation, all of which affect the emulsion stability. The aim of this study is to characterize oil-in-water (O/W) emulsions (droplet size and stability) in terms of surfactant concentration and surfactant composition (sodium dodecyl benzene sulphonate (SDBS)/Tween 80 mixture). Ultraviolet-visible (UV-vis) transmission spectroscopy has been applied to obtain droplet size and stability of the emulsions and the verification of emulsion stability with the relative cleared volume technique (time required for a certain amount of emulsion to separate as a cleared phase). It is demonstrated that the DSD of the emulsions is a function of the oil concentration and the surfactant composition with higher stability for emulsions prepared with higher SDBS ratio and lower relative cleared volume with the time. Results also show that smaller oil droplets are generated with increasing Tween 80 ratio and emulsifier concentration.     

On the formation of concentrated stable w/o emulsions

The conditions for the formation of concentrated w/o emulsions based on Aerosol OT and aliphatic hydrocarbons were studied. It was found that high stability is obtained if the attraction between the emulsion droplets is kept to a minimum. This is achieved by matching the refractive index of the dispersed phase and the organic phase. Furthermore, it is shown that the mere presence of salt does not render any stability. Hence, the speculated mechanism that salt stabilises against Ostwald ripening does not hold for these emulsions.     

Droplet migration in emulsion systems measured using MR methods

The migration of emulsion droplets under shear flow remains a largely unexplored area of study, despite the existence of an extensive literature on the analogous problem of solid particle migration. A novel methodology is presented to track the shear-induced migration of emulsion droplets based on magnetic resonance imaging (MRI). The work is in three parts: first, single droplets of one Newtonian fluid are suspended in a second Newtonian fluid (water in silicone oil (PDMS)) and are tracked as they migrate within a Couette cell; second, the migration of emulsion droplets in Poiseuille flow is considered; third, water-in-silicone oil emulsions are sheared in a Couette cell. The effect of (a) rotational speed of the Couette, (b) the continuous phase viscosity, and (c) the droplet phase concentration are considered. The equilibrium extent of migration and rate of migration increase with rotational speed for two different emulsion systems and increased continuous phase viscosity, leads to a greater equilibrium extent of migration. The relationship between the droplet phase concentration and migration is however complex. These results for semi-concentrated emulsion systems and wide-gap Couette cells are not well described by existing models of emulsion droplet migration.     

SEMICONTINUOUS EMULSION POLYMERIZATION OF VINYL ACETATE X. KINETICS OF HOMOPOLYMERIZATION,CO POLYMERIZATION,AND INITIATOR DECOMPOSITION IN THE PRESENCE OF SULFOSUCCINATE-TYPE SURFACTANTS

ABSTRACT

Miorocrystalline cellulose stabilized emulsions (o/w) were evaluated by means of brightfield and polarized light microscopy, freeze-etch electron microscopy, droplet size analyses and rheologic measurements. These studies indicated that miorocrystalline cellulose (Avicel RC591 ) forms a network around emulsified oil droplets. This structure provides a mechanical barrier at the o/w interface which stabilizes the emulsion without the necessity for decreasing interfacial tension, as in conventional surfactant-stabilized emulsions. Rheologic studies indicated that emulsions containing Avicel RC591 had a considerable degree of thlxotropy which contributed to their stability. When Tween 80 was incorporated in this system, oil droplets coalesced indicating that the stability of the emulsion was affected adversely.     

Adsorption behaviour of lactoferrin in oil-in-water emulsions as influenced by interactions with beta-lactoglobulin

Oil-in-water emulsions (pH 7.0 or pH 3.0) containing 30 wt% soya oil and various concentrations of lactoferrin were made in a two-stage valve homogenizer. The average droplet size (d32), the surface protein coverage (mg/m2) and composition, and the zeta-potential of the emulsions were determined. The value of d32 decreased with increasing lactoferrin concentration up to 1%, and then was almost independent of lactoferrin concentration beyond 1% at both pH 7.0 and pH 3.0. The surface protein coverage of the emulsions made at pH 7.0 increased almost linearly with increasing lactoferrin concentration from 0.3 to 3%, but increased only slightly in emulsions made at pH 3.0 at lactoferrin concentrations >1%. The surface protein coverage of the emulsions made at pH 3.0 was lower than that of the emulsions made at pH 7.0 at a given protein concentration. The emulsion droplets had a strong positive charge at both pH 7.0 and pH 3.0, indicating that stable cationic emulsion droplets could be formed by lactoferrin alone. When emulsions were formed with a mixture of lactoferrin and beta-lactoglobulin (beta-lg) (1:1 by weight), the charge of the emulsion droplets was neutralized at pH 7.0 suggesting the formation of electrostatic complexes between the two proteins. The composition of the droplet surface layer showed that both proteins were adsorbed, presumably as complexes, from the aqueous phase at pH 7.0 in equal proportions, whereas competitive adsorption occurred between lactoferrin and beta-lg at pH 3.0. At this pH, beta-lg was adsorbed in preference to lactoferrin at low protein concentrations (1%), whereas lactoferrin appeared to be adsorbed in preference to beta-lg at high protein concentrations.     

Effect of Aqueous Phase Composition on the Properties of a Silica-Stabilized W/O Emulsion

A high volume fraction silica stabilized w/o emulsion with small droplet size ( approximately 3 μm) has been prepared using a commercially available hydrophobic silica. Addition of hydroxypropyl cellulose to the dispersed aqueous phase was found to improve the monodispersity of the emulsion by suppressing the production of larger droplets. The droplet size distribution showed complex behavior as the silica concentration was varied, which was explained using a simple kinetic argument. The effect of varying the acidity and ionic strength of the internal water phase was investigated. It was found that the presence of strong acid or strong alkali in the internal aqueous phase increased the gelation of the emulsions by promoting flocculation. This could be explained by acid- and alkali-catalyzed cleavage of surface siloxane groups increasing the number of surface silanol groups. If emulsions of strong acid and strong alkali were mixed, substantial additional gelation (again caused by flocculation) occurred. A possible explanation, preferred by the author, was an electrostatic one involving the interaction of dipoles in close proximity in the flocculated emulsion. Copyright 1999 Academic Press.     

Interactions between flaxseed gums and WPI-stabilized emulsion droplets assessed in situ using diffusing wave spectroscopy

Diffusing wave spectroscopy (DWS) was used to investigate the behavior of flaxseed gums when added to WPI-stabilized emulsions. The effect of different concentrations (0–0.33% (w/v)) of flaxseed gum, derived from two seed varieties, namely Emerson and McDuff, was studied at acidic and neutral pH. At pH 7.0 and low gum concentrations the dynamic and spatial characteristics of the system remained unchanged. While at gum concentrations from 0.075% to 0.20% a rapid phase separation was observed, at higher concentrations phase separation was retarded because of the increased background viscosity slowing down the mobility of the emulsion droplets. At pH 3.5, the difference in overall electrical charge between the gum (negative) and the protein on the emulsion surface (positive) led to electrostatic interactions. While at low concentration of flaxseed gum the general characteristics of the emulsions were not significantly different, at intermediate concentrations, bridging flocculation occurred. When sufficient flaxseed gum was present, the emulsion droplets mobility was arrested in a gel-like state. In spite of the compositional differences in the ratio of acidic and neutral fraction between the two polysaccharides extracted from different seed varieties, at both values of pH the behavior of the emulsions after addition of the polysaccharide was comparable.     

Characterization of fluorocarbon-in-water emulsions with added triglyceride

Fluorocarbon-in-water emulsions are being explored clinically as synthetic oxygen carriers in general surgery. Stabilizing fluorocarbon emulsions against coarsening is critical in maintaining the biocompatibility of the formulation following intravenous administration. It has been purported that the addition of a small percentage of long-chain triglyceride results in stabilization of fluorocarbon emulsions via formation of a three-phase emulsion. In a three-phase emulsion, the triglyceride forms a layer around the dispersed fluorocarbon, thereby improving the adhesion of the phospholipid surfactant to the dispersed phase. In the present study, we examined the effect of triglyceride addition on the physicochemical characteristics of the resulting complex dispersion. In particular, we examined the particle composition and stability of the dispersed particles using a method which first fractionates (classifies) the different particles prior to sizing (i.e., sedimentation field-flow fractionation). It was determined that the addition of a long-chain triglyceride (soybean oil) results in oil demixing and two distinct populations of emulsion droplets. The presence of the two types of emulsion droplets is not observed via light scattering techniques, since the triglyceride droplets dominate the scattering due to a large difference in the refractive index between the particles and the medium as compared to fluorocarbon droplets. The growth of the fractionated fluorocarbon emulsion droplets was followed over time, and it was found that there was no difference in growth rates with and without added triglyceride. In contrast, addition of medium-chain-triglyceride (MCT) oils results in a single population of emulsion droplets (i.e., a three-phase emulsion). These emulsions are not stable to droplet coalescence, however, as significant penetration of MCT into the phospholipid lipid interfacial layer results in a negative increment in the monolayer spontaneous curvature, thereby favoring water-in-oil emulsions and resulting in destabilization of the emulsion to the effects of terminal heat sterilization or mechanical stress.     

Stabilization of Water‐Soluble Antioxidant in Water‐in‐Oil‐in‐Water Double Emulsions

Abstract

In this study, we are introducing a method that can effectively stabilize antioxidants in water‐in‐oil‐in‐water (W/O/W) double emulsions. Preliminarily, stable W/O/W double emulsions were produced by manipulating the characteristics of internal aqueous phase via two‐stage emulsification, resulting consequently in the formation of fine internal water droplets in the dispersed oil droplets. From conductivity measurements that can determine the elution amount of internal aqueous phase, it was confirmed that the double emulsion stability could be improved by treating the internal aqueous phase with a hydroxypropyl‐beta‐cyclodextrin. In this study, kojic acid, 5‐hydroxy‐2‐(hydroxymethyl)‐4‐pyrone was selected as a model antioxidant. The stabilization of kojic acid was attempted by locating it in the internal water droplets of the stable W/O/W double emulsions. The stability of kojic acid in the double emulsion system could be maintained at 90% for 10 weeks at high temperature. We believe that these stable W/O/W double emulsions could be used meaningfully as a carrier for many unstable antioxidants.     

Behaviour of formula emulsions containing hydrolysed whey protein and various lecithins

Formula emulsion systems are used as enteral, sports and health products. In some formulas addition of hydrolysed protein is necessary to guarantee ease of digestion and hypoallergenicity. In the low fat emulsion model an increase in the content of lecithin (phospholipid mixture) was required, in consideration of the advice of the Food and Nutrition Board (USA) for choline supplementation. The individual and interactive effects of whey protein isolate (WPI) or hydrolysate (WPH) (3.7 and 4.9% w/w), unmodified deoiled or hydrolysed lecithin (0.48 or 0.7% w/w) and carbohydrate in the form of maltodextrin with dextrose equivalent (DE) 18.5 or glucose syrup with DE 34 (11% w/w) on the properties of formula emulsions with 4% v/w sunflower oil, were investigated using a full factorial design. The emulsions were characterised by particle size distribution, coalescence stability, creaming rate, and also surface protein and lecithin concentration. WPI-containing emulsions proved to be stable against coalescence and showed only little creaming after 1 and 7 days standing. There was a significant increase in the mean droplet size and a significant deterioration of coalescence and creaming stability when WPH instead of WPI was used as the protein source, due to the lower number of large peptides and lower surface activity of the WPH. Increasing the WPH concentration led to an increase in oil droplet size and further deterioration of the stability of the emulsions. The starch hydrolysate and lecithin also significantly influenced the emulsion properties. Their influence was less strong when the emulsion contained WPI. Under the conditions used WPH-based emulsions were more stable, in terms of creaming and coalescence, when a low level of protein was used in conjunction with hydrolysed lecithin and glucose syrup. Oil droplets in emulsions containing unmodified lecithin in either the continuous or disperse phase and WPH in the continuous phase were very sensitive to coalescence. The addition of starch hydrolysates (DE 18.5) induced intensive flocculation and phase separation in these emulsions.     

Ethanol-in-oil emulsion (E/O) stabilized by polyglycerol polyricinoleate: A potential delivery system for ethanolic extract

This study evaluated how variations in polyglycerol polyricinoleate (PGPR) concentration and ethanol dispersed phase content affect the stability of ethanol-in-oil (E/O) emulsions. Results indicate that the stable 10?wt% E/O emulsions can be produced using 2?wt% PGPR. Increasing the ethanol dispersed phased content at constant PGPR concentration caused instability in emulsion. These emulsions remained stable to droplet flocculation and coalescence in the presence of Centella asiatica ethanol extract. PGPR does not greatly decrease the interfacial tension of the ethanol–oil interface. However, it adsorbed at the interface and stabilized the ethanol droplets in the emulsion via steric mechanism.     

On the escape process during phase inversion of an emulsion

This paper deals with a phenomenon which plays an important role in the phase inversion process of emulsions. This process is governed by the interplay of coalescence of droplets, often leading to double emulsions, and the escape of those internal droplets. The latter process retards the inversion process. Coalescence has been the subject of many studies, contrary to the escape event. This paper addresses the escape process both theoretically and experimentally. The model developed analyses the rate of the escape of internal droplets from the mother droplet via a coalescence process, where the internal flow, as generated by the external flow, generates the viscous force for coalescence. Incomplete mixing in the droplet has been assumed. Experimental data on the escape rate of oil droplets from O/W/O emulsions have been analysed using a Computational Fluid Dynamics approach, where the model as indicated above has been incorporated. Experimental data and simulations compare very well. Data have been compared on varying the size of the inner droplets and the rotational speed of the vessel where the double emulsion has been formed and where the escape took place.     

Structural evolution of polymer-stabilized double emulsions

Polymer-stabilized double emulsions are produced by a two-step process, high shear emulsification in the primary and membrane emulsification in the secondary. By repeated fractionation after each emulsification, we obtain monodisperse double emulsions with the size of the complex droplets ranging from submicrometer to a few micrometers. With osmotic pressure balance between the inner and outer phases, the polymer-stabilized double emulsions remain stable for a year at room temperature without structure deterioration. We generalize laser light scattering to probe the structure and internal dynamics of the complex system by including the effects of the amplitude fluctuations of the scattered fields. Both static light scattering (SLS) and dynamics light scattering (DLS) can resolve the inclusions inside the complex droplets. Water-soluble nonionic surfactants are used to induce destabilization of double emulsions. We find that a double emulsion turns into a simple emulsion within a minute at a surfactant concentration of less than 10(-)(3) mol/L. We demonstrate that DLS is a powerful technique to study the kinetics of destabilization of double emulsions. Coalescence between the internal droplets and the external continuous phase is identified as a major release pathway.     

Interface composition of multiple emulsions: rheology as a probe

We have investigated the dynamic rheological properties of concentrated multiple emulsions to characterize their amphiphile composition at interfaces. Multiple emulsions (W1/O/W2) consist of water droplets (W1) dispersed into oil globules (O), which are redispersed in an external aqueous phase (W2). A small-molecule surfactant and an amphiphilic polymer were used to stabilize the inverse emulsion (W1 in oil globules) and the inverse emulsion (oil globules in W2), respectively. Rheological and interfacial tension measurements show that the polymeric surfactant adsorbed at the globule interface does not migrate to the droplet interfaces through the oil phase. This explains, at least partly, the stability improvement of multiple emulsions as polymeric surfactants are used instead of small-molecule surfactants.