The mixing properties of 1,3,5-trimethyl-1,3,5-tris(3,3,3-trifluoropropyl) cyclotrisiloxane with various organosilicon compounds at different temperatures

The density and refractive index were determined for four binary mixtures of 1,3,5-trimethyl-1,3,5-tris(3,3,3-trifluoropropyl) cyclotrisiloxane with octamethyl-cyclotetrasiloxane, hexamethyldisiloxane, 2,4,6,8-tetramethyl-cyclotetrasiloxane and 2,4,6,8-tetramethyl-2,4,6,8-tetraethenylcyclotetrasiloxane at different temperatures T = (308.15, 313.15, 318.15, 323.15 and 328.15) K and atmospheric pressure using a DMA4500/RXA170 combined system. The excess molar volume, partial excess volume at infinite dilution, isobaric coefficient of thermal expansion, excess refraction indices, Lorentz–Lorenz molar refraction and the deviation in molar refraction have been calculated using this data. The results have been incorporated into the Redlich–Kister equation and used to estimate the binary interaction parameters and standard deviation. The values of partial excess volume at infinite dilution and excess refraction indices for the four binary systems at different temperatures were calculated using the adjustable parameters of the Redlich–Kister smoothing equation. The factors that affect these excess quantities are discussed.     

One‐Pot Synthesis of Pyrazoles through a Four‐Step Cascade Sequence

A one‐pot synthesis of 3,4,5‐ and 1,3,5‐pyrazoles from tertiary propargylic alcohols and para‐tolylsulfonohydrazide has been accomplished. The pyrazoles are formed through a four‐step cascade sequence, including FeCl₃‐catalyzed propargylic substitution, aza‐Meyer–Schuster rearrangement, base‐mediated 6π electrocyclization, and thermal [1,5] sigmatropic shift. In this reaction, the 3,4,5‐ and 1,3,5‐pyrazoles are produced selectively according to different substituents in the starting alcohols.     

Synthesis of transparent and thermally stable polycyanurates and their thermal rearrangement

Transparent and thermally stable polycyanurates, whose solubility can be changed by thermal rearrangement, have been synthesized as functional films used in the multilayer coating process. Before the synthesis of polycyanurates, the model compound, 2,6‐bis(4‐methoxyphenyl)?6‐methoxy‐1,3,5‐triazine as a cyanurate is prepared and rearranged to an isocyanurate, 1,3‐bis(4‐methoxyphenyl)?5‐methyl‐1,3,5‐triazinane‐2,4,6‐trione in an excellent yield by thermal treatment. Based on this result, polycyanurates are prepared by the phase‐transfer‐catalyzed polycondensation of 2,4‐dichloro‐6‐methoxy‐1,3,5‐triazine with bisphenol monomers in the presence of quaternary ammonium salts. The polycyanurate obtained from 9,9‐bis(hydroxyphenyl)fluorene exhibits a high glass transition temperature at 251 °C. The solubility of polycyanurate films containing 1 wt % of tetrabutylammonium bromide can be changed by thermal rearrangement. The partially rearranged films keep high transparency and low birefringence. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3950–3955     

Heterocycles from heterocycles. - III[1]. 1,3,5-trisubstituted hexahydro-1,3,5-triazines-2-ones from 1,3,5-trisubstituted hexahydro-1,3,5-triazines and organic isocyanates

1,3,5-Triscubstituted hexahydro-1,3,5-trazin-2-ones 3 are easily obtained by the reaction of 1,3,5-trisub-stituted hexahydro-1,3,5-triazines 1 with organic isocyanates 2 . The reaction is believed to occur by the sequential addition to 2 of two molecules of the monomeric N-methyleneamines in thermal equilibrium with 1. Substituent scrambling at the operating temperature (120°) was negligible. The crystal structure of 1,3,5-triphenylhexahydro-1,3,5-triazin-2-one (3a) has been determined by X-ray diffraction methods.     

DFT Study of Hydrogen-Bonded 1,3,5-Triazine-Water Complexes

The 1,3,5-triazine-water hydrogen bonding interactions have been investigated using the density functional theory B3LYP method and 6-31 ＋＋G^＊＊ basis, obtaining one, two and seven energy minima of the ground states for the 1,3,5-triazine-water, 1,3,5-triazine-（water）2 and 1,3,5-triazine-（water）3 complexes respectively. The fully optimized geometries and binding energies were reported for the various stationary points. The global minima of 1,3,5-triazine-（water）2 and 1,3,5-triazine-（water）3 complexes have a hydrogen bond N…H-O and a chain of water molecules, terminated by a hydrogen bond O…H-C. The binding energies are 13.38, 39.52 and 67.79 kJ/mol for the most stable 1,3,5-triazine-water, 1,3,5-triazine-（water）2 and 1,3,5-triazine-（water）3 complexes respectively, after the basis set superposition error and zero point energy corrections. The H-O symmetric stretching modes of water in the complexes are red-shifted relative to those of the monomer water. In addition, the NBO analysis indicates that inter-molecule charge transfer is 0.02145 e, 0.02501 e and 0.02777 e for the most stable 1 ： 1, 1 ： 2 and 1 ： 3 complexes between 1,3,5-triazine and water, respectively.     

Synthesis of polyisocyanurates by thermal rearrangement of polycyanurates

Polyisocyanurates have been successfully prepared by the thermal rearrangement of polycyanurates, which were obtained from 2,4‐dichloro‐6‐methoxy‐1,3,5‐triazine and bisphenol monomers. The thermal rearrangement was carried out in the presence of a small amount of tetrabutylammonium bromide (TBAB) as a catalyst at 200 °C for 30 or 60 min in an argon atmosphere, and the degree of arrangement was greater than 95%. Transparent and amorphous polyisocyanurate films were obtained and showed a good thermal stability with a 5% weight loss temperature above 340 °C in nitrogen and the glass transition temperature above 210 °C. Films with a 10‐µm thickness exhibited an excellent transparency above 90% at 400 nm. Furthermore, the thermal rearrangement of 2,6‐bis(4‐methoxyphenyl)‐6‐methoxy‐1,3,5‐triazine to 1,3‐bis(4‐methoxyphenyl)‐5‐methyl‐1,3,5‐triazinane‐2,4,6‐trione was investigated in detail. It was found that the complete thermal rearrangement was successfully accomplished in the presence of 2 wt % TBAB at 150 °C for 20 min in an argon atmosphere. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 692–698     

The synthesis and characterization of single substitute melamine cored Schiff bases and their [Fe(III) and Cr(III)] complexes

In this study, firstly, two single substitute novel ligands have been synthesized by reacting melamine with 3,4,-dihydroxybenzaldeyhde or 4-carboxybenzaldehyde. Then, eight new mono nuclear single substitute [Salen/Salophen Fe(III) and Cr(III)] complexes have been synthesized by reacting the ligands [2-(3,4-dihydroxybenzimino)-4,6-diamimo-1,3,5-triazine and 2-(4-carboxybenzimino)-4,6-diamimo-1,3,5-triazine)] with tetradentate Schiff bases N,N′-bis(salicylidene)ethylenediamine-(salenH₂) or bis(salicylidene)-o-phenylenediamine-(salophen H₂). And then, all ligands and complexes have been characterized by means of elementel analysis, FT-IR spectroscopy, ¹H NMR, LC–MS, thermal analyses and magnetic suscebtibility measurements. Finally, metal ratios of the prepared complexes were determined using AAS. The complexes have also been characterized as disorted octahedral low-spin Fe(III) and Cr(III) bridged by catechol and COO^? groups.     

Synthesis and Characterization of S-Triazine Cored Tripodal Keto-oxime and Its Trinuclear Complexes

2,4,6-Tris(4-hydroxybenzimino)-1,3,5-triazine (II) has been synthesized by the reaction of 1 equiv. melamine (I) and 3 equiv. 4-hydroxybenzaldehyde and characterized by means of elemental analysis, ¹H NMR, Fourier transform–infrared spectroscopy, and liquid chromatography–mass spectrometry (LC-MS). 2,4,6-tris(4-(2-phenyl-2-keto-hydroxyiminoyloxy)benzimino)-1,3,5-triazine L (III) has been synthesized by the reaction of 1 equiv. II and 3 equiv. chloroisonitrozoacetophenone and characterized by means of the same methods. Four novel trinuclear Fe(III) and Cr(III) complexes involving tetradentate Schiff bases N,N′-bis(salicylidene)ethylenediamine-(salenH₂) or bis(salicylidene)-o-phenylenediamine-(salophen H₂) with L (III) have been synthesized and characterized by means of elemental analysis, Fourier transform–infrared spectroscopy, LC-MS (ESI⁺), and thermal analyses. The metal ratios of the prepared complexes have been determined using atomic absorption spectroscopy. The aim of the present study is to synthesize novel tridirectional-trinuclear systems and to present their effects on magnetic behavior of [salen or salophenFe(III)/Cr(III)] capped complexes. The complexes have also been characterized as low-spin distorted octahedral Fe(III) and as distorted octahedral Cr(III) bridged by keton-oxime group.     

The structure of 2,4,6-tris(1<Emphasis Type="Italic">H</Emphasis>–pyrazol-1-yl)-1,3,5-triazine in the solid state: on polymorphs,pseudopolymorphs and co-crystals

Three structures of 2,4,6-tris(1H–pyrazol-1-yl)-1,3,5-triazine (TPT) have been determined at 193 K: the isolated molecule (2a), a solvate containing molecules of water and acetonitrile (2b) and a complex of two molecules of TPT and three molecules of water (2c). To discuss the structures, B3LYP/6–311++G(d,p) calculations have been carried out, in particular, in what concerns hydrogen bonds.     

含氟环形硅氧烷的立体异构和稳定性

文献曾报道, 1,3,5-三(3,3,3-三氟丙基)-1,3,5-三甲基环三硅氧烷(简称D^F~3)有两种立体异构体, 即顺式和反式。1,3,5,7-四(3,3,3-三氟丙基)-1,3,5,7-四硅氧烷(简称D^F~4)有四种异构体。但未报道其结构特点。本文试图进一步探讨D^F~3和D^F~4的立体异构体的结构和稳定性。     

Crosslinking reactions of 1,3,5-tris(2-methylaziridinyl-1-methyl)benzene (TRIMAM) with carboxyl terminated polybutadiene

Curing reactions of a new crosslinking agent, 1,3,5-tris(2-methylaziridinyl-1-methyl)benzene (TRIMAM) with carboxylterminated polybutadiene have been studied by dynamic differential thermal analysis and by IR spectroscopy. The crosslinking reactions are found to be faster for this new compound compared with the conventional tris-1-(2-methyl) axiridinyl phosphine oxide (MAPO).     

Study on side-chain second-order nonlinear optical polyimides based on novel chromophore-containing diamines. I. Synthesis and characterization

Side-chain second-order nonlinear optical polyimides were prepared from four novel chromophore-containing diamines and 4,4′-(hexafluoroisopropylidene) diphthalic anhydride by a traditional two-step process that included a solution polycondensation followed by a chemical imidization. The four diamines were 2,4-di-β-aminoethylamino-6-p-nitrophenylamino-1,3,5-triazine (M1), 4-nitro-4′-[N-(4,6-di-β-aminoethylamino)-1,3,5-triazin-2-yl]amino azobenzene (M2), 2,4-di-p-aminophenylamino-6-p-nitrophenylamino-1,3,5-triazine (M3), and 4-nitro-4′-[N-(4,6- di-4-aminophenylamino)-1,3,5-triazin-2-yl]amino azobenzene (M4). All the polyimides exhibited maximum ultraviolet-visible absorption peaks or shoulders of chromophores at wavelengths below 400 nm, and those based on M1 and M3 were transparent at wavelengths above 450 nm, whereas those based on M2 and M4 were transparent at wavelengths above 550 nm. The polyimides possessed high glass-transition temperatures (T_g's; 218–247 °C) and thermal decomposition temperatures. They were soluble in aprotic solvents such as N-methyl-2-pyrrolidone, N,N-dimethyl acetamide, N,N-dimethyl formamide, and dimethylsulfone. Some were even soluble in common low-boiling-point solvents such as tetrahydrofuran. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4330–4336, 1999     

Straightforward solvent-free synthesis of new chiral benzene-1,3,5-tricarboxamides

A new series of chiral benzene-1,3,5-tricarboxamides (BTAs) 3a–e was prepared using the ecofriendly solvent-free approach, starting with benzene-1,3,5-tricarbonyl chloride 1 and appropriate optically pure primary amines 2a–e. All the reactions occur in a short time with excellent yields (>90%). The structures of the compounds have been characterized by Fourier transform infrared spectroscopy (FT–IR), Proton nuclear magnetic resonance (1H NMR), Carbon 13 nuclear magnetic resonance (13C NMR), electron ionization mass spectrometry (EI–MS), and elemental analysis.     

A Hybrid statistical mechanics—quantum chemical model for proton transfer in 5‐azauracil and 6‐azauracil in water solution

A hybrid statistical physics—quantum‐chemical methodology was implemented to study the water‐assisted intramolecular proton‐transfer processes in 5‐ and 6‐azauracils in aqueous solutions. The solvent effects were included in the model by explicit inclusion of two pairs of water molecules, which model the relevant part of the first hydration shell around the solute. The position of these water molecules was initially estimated by carrying out a classical Metropolis of dilute water solutions of the title compounds and subsequently analyzing solute–solvent intermolecular interactions in the Monte Carlo‐generated configurations. Sequentially to the statistical physics simulation, ab initio quantum mechanical (QM) level of theory was implemented. The effects of the water as solvent (at ab initio QM level) were introduced at two different levels—using solute–solvent clusters (four‐water molecules) and using the same clusters embedded in an external continuum. Full geometry optimizations of these complexes were carried out at MP2/6–31 + G(d, p) and conductor‐polarizable continuum model (C‐PCM)/MP2/6–31 + G(d, p). Single point calculations were performed at CCSD(T)/6–31 + G(d, p)//MP2/6–31 + G(d, p) computational level to obtain more accurate energies. According to our calculations hydrated azauracils should exist in three forms: mainly dioxo form and two hydroxy forms. The calculated proton transfer activation energies for tautomeric reactions of 5‐azauracil and 6‐azauracil show different pictures for these two compounds. According to C‐PCM/MP2/6–31 +G(d, p) data, water‐assisted proton transfer in 5‐azauracil realizes through two parallel reactions: 1,3,5‐triazine‐2,4(1H,3H)‐dione → 6‐hydroxy‐1,3,5‐triazin‐2(1H)‐one and 1,3,5‐triazine‐2,4(1H,3H)‐dione → 4‐hydroxy‐1,3,5‐triazin‐2(1H)‐one. Tautomeric equilibrium in 6‐azauracil in water could occur by two contiguous reactions: 1,2,4‐triazine‐3,5(2H,4H)‐dione → 5‐hydroxy‐1,2,4‐triazin‐3(2H)‐one and 5‐hydroxy‐1,2,4‐triazin‐3(2H)‐one → 3‐hydroxy‐1,2,4‐triazin‐5(2H)‐one. The proton transfer investigated reactions in 5‐ and 6‐azauracils involve concerted atomic movement. © 2015 Wiley Periodicals, Inc.     

Hydrogen bonding structure and many‐body interactions in 1,3,5‐triazine–(water)3 and 1,2,4‐triazine–(water)3 complexes

The hydrogen bonding structure and many‐body interactions between 1,3,5‐triazine (1,2,4‐triazine) and three water molecules are studied using the density functional theory (DFT) B3LYP method and 6‐31++G** basis set. Various structures of 1,3,5‐triazine–(water)₃ and 1,2,4‐triazine–(water)₃ complexes are investigated, and the seven and eight stable structures are reported for 1,3,5‐triazine–(water)₃ and 1,2,4‐triazine–(water)₃, respectively. Many‐body analysis is also carried out to obtain relaxation energy and many‐body interaction energy (two‐, three‐, and four‐body), and the most stable conformer has the basis set superposition error corrected interaction energy of ?92.09 and ?99.53 kJ/mol. The two‐ and three‐body interactions have significant contribution to the total interaction energy, whereas the relaxation energy, four‐body interactions are very small for 1,3,5‐triazine–(water)₃ and 1,2,4‐triazine–(water)₃ complexes. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

Sonochemical synthesis and structural characterization of a nano-structure Pb(II) benzentricarboxylate coordination polymer: new precursor to pure phase nanoparticles of Pb(II) oxide

Microcrystals of a new Pb(II) coordination polymer, [Pb₂(1,3,5-HBTC)₂(H₂O)₄] · H₂O (1) (1,3,5-H₃BTC = 1,3,5-benzentricarboxylic acid), was synthesized by a sonochemical method. The structure was characterized by scanning electron microscopy, X-ray powder diffraction, elemental analyses, and IR spectroscopy. Thermal stability was studied by thermal gravimetric and differential thermal analyses. After the calcination of nanosized 1 at 400°C, pure phase nanosized Pb(II) oxide has been produced.     

Synthesis and photophysical properties of hyperbranched polyfluorenes containing 2,4,6-tris(thiophen-2-yl)-1,3,5-triazine as the core

A series of new hyperbranched polymers containing a 2,4,6-tris(thiophen-2-yl)-1,3,5-triazine core unit and polyfluorene chain arms have been synthesized via Suzuki coupling, and characterized by NMR, IR and GPC. All the polymers exhibit good thermal stability with a high decomposition temperature. By changing the 2,4,6-tris(thiophen-2-yl)-1,3,5-triazine/fluorene ratio the UV-vis absorption and emission spectra can be partially tuned. It has been found that the polymers containing a low ratio of 2,4,6-tris(thiophen-2-yl)-1,3,5-triazine units (P1-P3) have an absorption maximum around 385 nm, localized in the polyfluorene chain, and a shoulder around 425 nm ascribable to a charge transfer state involving the fluorene and the 2,4,6-tris(thiophen-2-yl)-1,3,5-triazine core. Increasing the molar ratio of the 2,4,6-tris(thiophen-2-yl)-1,3,5-triazine unit enhances the charge transfer band which becomes dominant for P4. The LUMO level of these polymers is relatively low due to the electron affinity of the triazine group. The polymers show dual emission, with a structured band in the blue (410-440 nm), attributed to the polyfluorene, and a broad band in the red (470-500 nm) associated with the charge transfer state. All the polymers exhibit two-photon absorption activity in the range of 660 to 900 nm with the maximum two-photon absorption (TPA) cross-section red-shifted from the corresponding linear absorption. The values of the TPA cross-sections vary from 1000 to 5000 GM, following the 2,4,6-tris(thiophen-2-yl)-1,3,5-triazine/fluorene ratio.     

Aromatic polyethers with 1,3,5-triazine units as hole blocking/electron transport materials in leds

Various difluoro functionalized aromatic 1,3,5-triazine monomers were prepared. A series of poly-(1,3,5-triazine-ether)s was synthesized by polycondensation with 4,4′-(hexafluoroisopropylidene)diphenol. The polymers have excellent thermal stability and are amorphous with glass transition temperatures in the range of 190–250°C. In order to examine the potential to apply these polymers in organic electroluminescent devices, the redox properties were studied by cyclic voltammetry. It was found that the monomers have high electron affinity and reach LUMO values in the range of −2.7 to −3.1 eV. This opens the possibility to utilize 1,3,5-triazine containing materials as electron injecting/hole blocking layer in LEDs. First LED results are in accordance to these high electron affinities.     

Linear and star-shaped polynuclear Ru(II) complexes of 2-(2'-pyridyl)benzimidazolyl derivatives: syntheses, photophysical properties and red light-emitting devices

Two new star-shaped ligands with a 1,3,5-triphenylbenzene core, tmpb (1,3,5-tris[p-2-(2'-pyridyl)benzimidazolylphenyl]benzene), and a 2,4,6-tris(p-biphenyl)-1,3,5-triazine core, tmbt (2,4,6-tris[p-2-(2'-pyridyl)benzimidazolylbiphenyl]-1,3,5-triazine), have been synthesized. Their corresponding trinuclear Ru(II) complexes [Ru3(tmpb)(bpy)6](PF6)6 (3) and [Ru3(tmpt)(bpy)6](PF6)6 (4) have been obtained. Two dinuclear linear Ru(II) complexes with previously reported ligands bmb (1,4-bis[2-(2'-pyridyl)benzimidazolyl]benzene) and bmbp (4,4'-bis[2-(2'-pyridyl)benzimidazolyl]biphenyl) and formulae [Ru2(bmb)(bpy)4](PF6)4 (1) and [Ru2(bmbp)(bpy)4](PF6)4 (2) have also been synthesized. Photophysical and electrochemical properties of the new compounds have been investigated. All four compounds display a characteristic metal-to-ligand-charge transfer (MLCT) absorption band and emit a red light when excited at the maximum of the MLCT band with emission maximum at 624, 629, 623 and 625 nm, respectively in neat films at ambient temperature. The emission quantum efficiency of the four complexes in neat films was determined to be 0.15, 0.17, 0.04 and 0.05, respectively. Light emitting devices based on these four compounds were fabricated by spin-casting the compound as a neat film to an ITO substrate, followed by the deposition of an aluminium metal layer. All devices emit a deep red light and the device behavior resembles that of a light emitting electrochemical cell. The EL maximum of the devices 1, 2, 3, and 4 is at 637, 657, 678, and 655 nm, respectively. All four devices have a fast response time when a sufficiently high voltage is applied. The device based on 2 is the brightest with a maximum luminance of 133 cd m(-2) at 7 V. The performance of devices based on 1, 2, and 4 is in general much more efficient than the device based on [Ru(bpy)3](PF6)2, which was fabricated and evaluated under the same experimental conditions as for the devices based on 1-4.     

Diamagnetic anisotropy of molecular complexes of 1,3,5-trinitrobenzene with anthracene and carbazole

The anisotropy of the diamagnetic properties of 1 : 1 EDA complex crystals of 1,3,5-trinitrobenzene with anthracene (A—TNB) and carbazole (C—TNB) has been measured as a function of temperature in the range 100–293 K. The results for 293 K are found to be in good agreement with the values calculated according to the rule of additivity for molecular susceptibilities. The temperature dependence of the diamagnetic anisotropy for both A—TNB and C—TNB crystals, is discussed in the context of possible phase transitions in the crystals. The influence of thermal motions on the diamagnetic properties is described