Economizing on Precious Metals in Three‐Way Catalysts: Thermally Stable and Highly Active Single‐Atom Rhodium on Ceria for NO Abatement under Dry and Industrially Relevant Conditions**

We show for the first time that atomically dispersed Rh cations on ceria, prepared by a high‐temperature atom‐trapping synthesis, are the active species for the (CO+NO) reaction. This provides a direct link with the organometallic homogeneous Rh^I complexes capable of catalyzing the dry (CO+NO) reaction. The thermally stable Rh cations in 0.1 wt % Rh₁/CeO₂ achieve full NO conversion with a turn‐over‐frequency (TOF) of around 330 h^?1 per Rh atom at 120 °C. Under dry conditions, the main product above 100 °C is N₂ with N₂O being the minor product. The presence of water promotes low‐temperature activity of 0.1 wt % Rh₁/CeO₂. In the wet stream, ammonia and nitrogen are the main products above 120 °C. The uniformity of Rh ions on the support, allows us to detect the intermediates of (CO+NO) reaction via IR measurements on Rh cations on zeolite and ceria. We also show that NH₃ formation correlates with the water gas shift (WGS) activity of the material and detect the formation of Rh hydride species spectroscopically.     

Catalytic reduction of nitric monoxide by ethene over Ag/TiO2 in the presence of excess oxygen

Selective reduction of nitric oxide (NO) by ethene in the presence of excess oxygen was investigated using a silver supported on TiO₂ (Ag/TiO₂) catalyst. Ag/TiO₂ showed high catalytic activity for the reduction of NO to N₂ and N₂O. The activity for the reduction of NO to N₂ and N₂O was enhanced with an increase up to 3 wt.% Ag loading level. On increasing the concentration of ethene, the catalytic activity for the reduction of NO to N₂ and N₂O was enhanced. The reduction of NO over Ag/TiO₂ catalyst never proceeds without coexistent oxygen.     

编织芳基网络聚合物负载Rh催化剂上高碳烯烃氢甲酰化反应性能

考察了编织芳基网络聚合物（KAPs）负载的Rh催化剂（Rh/KAPs）在高碳烯烃氢甲酰化反应中的催化性能. 结果表明,三苯基膦-苯基底KAPs负载Rh催化剂（Rh/KAPs-1）具有优异的高碳烯烃氢甲酰化反应活性,产物醛收率显著高于Rh/SiO₂催化剂. 傅里叶变换红外光谱、热重、氮气吸附-脱附、X射线衍射、透射电子显微镜、¹³C核磁共振和³¹P核磁共振结果显示,Rh/KAPs-1催化剂具有优异的热稳定性及大的比表面积和多级孔道结构,Rh颗粒处于高度分散状态,并可在反应过程中形成均相催化活性物种.     

Silylation effect on the catalytic properties of FeZSM-11 in benzene oxidation to phenol

The outer surface of FeZSM-11 zeolite was selectively silylated without affecting the inner system of its channels. SiO₂ deposition suppressed both the acidity and catalytic activity of the outer surface in mesitylene isomerization. Neither zeolite activity, nor its stability in N₂O benzene oxidation to phenol have changed upon silylation. This fact gives evidence that the latter reaction proceeds primarily within the zeolite channels.     

SiO2负载氮掺杂TiO2可见光响应光催化剂的制备及性能

以四氯化钛为钛源,尿素为氮源,采用液相水解-沉淀法制得SiO2负载N掺杂TiO2可见光响应TiO2-xNy/SiO2光催化剂(TSN)。以苯酚为模型物,考察了TSN在可见光区、紫外光区及太阳光下的光催化活性,以及催化剂的使用寿命、分离性能。采用XPS、FTIR、UV-Vis DRS、XRD、TEM和低温氮物理吸附等对催化剂的结构进行表征。结果表明,N以阴离子形式进入TiO2体相并置换晶格中的O,适量N掺杂的TSN在紫外光区、可见光区及太阳光下均表现出较高的活性。SiO2与TiO2界面间有Ti-O-Si键形成,结合牢固。N掺杂在TiO2表面生成Ti-O-N键,形成新的能级结构,使催化剂的吸收红移至450~500 nm,诱发TiO2可见光催化活性。SiO2负载可减小TiO2颗粒平均尺寸,增加催化剂比表面积;同时SiO2负载还可改善催化剂的分离性能,提高催化剂使用寿命。     

Preparation of ethyl levulinate from wheat stalk over Zr(SO4)2/SiO2

A series of Zr(SO₄)₂/SiO₂ solid acid catalysts with different Zr(SO₄)₂ loadings were prepared by water-soluble-impregnation method at room temperature. Then, the prepared catalysts were characterized by Fourier transform infrared spectroscopy, transmission electron microscopy and energy-dispersive X-ray spectrum, X-ray diffraction, adsorption/desorption of N₂, and temperature-programmed desorption of NH₃. The results showed that the active component Zr(SO₄)₂ was successfully adhered to the mesoporous SiO₂, and the acid amount of Zr(SO₄)₂/SiO₂ increased with the increasing of the Zr(SO₄)₂ loadings. Finally, the wheat stalk was used as raw material and depolymerized over Zr(SO₄)₂/SiO₂ to produce ethyl levulinate (EL). The reaction mixture was separated and purified by filtration and vacuum distillation. The kinetic characteristics and the reaction pathway were also studied. A comparative study showed that 20 wt.% Zr(SO₄)₂/SiO₂ exhibited higher catalytic activity. When reaction temperature, time, catalyst dosage and Zr(SO₄)₂ loadings were 190 °C, 50 min, 20 wt.% and 30 wt.%, the EL yield reached a maximum of 17.14%. The relative content of EL exceeded 90% after three steps of distillation.     

Hydrogenolysis of hexane on supported rhodium catalysts

Hexane was reacted in mixtures with excess hydrogen on 5% Rh on different supports: Al₂O₃ and SiO₂, the latter catalyst in two states: after reduction at 603 K (LT) and after a prereduction at 1253 K (HT). The main reaction was hydrogenolysis. The catalysts were characterized with the fragment composition at different temperatures and hydrogen pressures. Two surface states could be distinguished: one with more hydrogen favored single rupture, the other with less hydrogen preferred multiple fragmentation. The transition between these states could be rather abrupt, as the surface hydrogen availability changed. The tendency to produce multiple fragments increased in the order Rh/Al₂O₃< Rh/SiO₂-LT < Rh/SiO₂-HT.     

Rhodium–Iodide Complex on a Catalytically Active SiO2 Surface for One-Pot Hydrosilylation–CO2 Cycloaddition

In this study, a novel Rh–iodide complex was synthesized through a surface reaction between an immobilized Rh cyclooctadiene complex and alkylammonium iodide (N⁺I⁻) on SiO₂. In the presence of ammonium cations, the SiO₂-supported Rh–iodide complex could be effectively used for the one-pot synthesis of various silylcarbonate derivatives starting from epoxy olefins, hydrosilanes, and CO₂. The maximum turnover numbers (TONs) for the hydrosilylation reaction and the CO₂ cycloaddition were 7600 (Rh) and 130 (N⁺I⁻), respectively. The catalyst exhibited much higher performance for hydrosilylation than solely the Rh complex on SiO₂. The mechanism of the Rh-catalyzed hydrosilylation reaction and the local structure of Rh, which is affected by the co-immobilized N⁺I⁻, were investigated by using Rh and I K-edge XAFS and XPS. Analysis of the XAFS profiles indicated the presence of a Rh−I bond. The Rh unit was in its electron-rich state. Curve-fitting analysis of the Rh K-edge EXAFS profiles suggests dissociation of the cycloocta-1,5-diene (COD) ligand from the Rh center. Results from spectroscopic and kinetic analyses revealed that the high activity of the catalyst (during hydrosilylation) could be attributed to a decrease in steric hindrance and the electron-rich state of the Rh. The decrease in the steric hindrance could be attributed to the absence of COD, and the electron-rich state promoted the oxidative addition of Si−H. To the best of our knowledge, this is the first example of a one-pot silylcarbonate synthesis as well as a determination of a novel surface Rh–iodide complex and its catalysis.     

Activity of palladium sulfide catalysts in the reaction of gas-phase hydrogenation of 2-methylthiophene

In the interaction of hydrogen with 2-methylthiophene in the gas phase over palladium sulfide catalysts at 180–260?C and 0.1–0.8 MPa, the saturation of the thiophene ring resulting in 2-methylthiolane and the hydrogenolysis of 2-methylthiophene occurs. When the conversion is lower than 60%, these reactions occur independently; at higher conversions, methylthiolane also undergoes hydrogenolysis. The specific catalytic activity of PdS supported on γ-Al₂O₃, TiO₂, and carbon and without support is much lower in the hydrogenation of 2-methylthiophene than the activity of PdS supported on SiO₂, aluminosilicate, and zeolite HNaY having strong Brönsted acid surface sites.     

State of Supported Nickel Nanoparticles during Catalysis in Aqueous Media

The state of Ni supported on HZSM‐5 zeolite, silica, and sulfonated carbon was studied during aqueous‐phase catalysis of phenol hydrodeoxygenation using in situ extended X‐ray absorption fine structure spectroscopy. On sulfonated carbon and HZSM‐5 supports, NiO and Ni(OH)₂ were readily reduced to Ni⁰ under reaction conditions (≈35 bar H₂ in aqueous phenol solutions containing up to 0.5 wt. % phosphoric acid at 473 K). In contrast, Ni supported on SiO₂ was not stable in a fully reduced Ni⁰ state. Water enables the formation of Ni^II phyllosilicate, which is more stable, that is, difficult to reduce, than either α‐Ni(OH)₂ or NiO. Leaching of Ni from the supports was not observed over a broad range of reaction conditions. Ni⁰ particles on HZSM‐5 were stable even in presence of 15 wt. % acetic acid at 473 K and 35 bar H₂.     

Synthesis of Zeolite ZSM-2 Using Zeolite NaX as Seeds

Introduction Oxygen and nitrogen have been produced tradition-ally by cryogenic distillation of air. Methods for the non-cryogenic separation based on selective adsorption have been developed and commercialized since the 1970s and have led to a cost-effective process for this important separation.1 Low-silica zeolites are important materials for producing oxygen by selective adsorption of nitrogen. In 19891990, a new generation of lith-ium-based adsorbents was developed.2,3 Highly lithium exc…     

Solution/Ammonolysis Syntheses of Unsupported and Silica-Supported Copper(I) Nitride Nanostructures from Oxidic Precursors

Herein we describe an alternative strategy to achieve the preparation of nanoscale Cu₃N. Copper(II) oxide/hydroxide nanopowder precursors were successfully fabricated by solution methods. Ammonolysis of the oxidic precursors can be achieved essentially pseudomorphically to produce either unsupported or supported nanoparticles of the nitride. Hence, Cu₃N particles with diverse morphologies were synthesized from oxygen-containing precursors in two-step processes combining solvothermal and solid−gas ammonolysis stages. The single-phase hydroxochloride precursor, Cu₂(OH)₃Cl was prepared by solution-state synthesis from CuCl₂·2H₂O and urea, crystallising with the atacamite structure. Alternative precursors, CuO and Cu(OH)₂, were obtained after subsequent treatment of Cu₂(OH)₃Cl with NaOH solution. Cu₃N, in the form of micro- and nanorods, was the sole product formed from ammonolysis using either CuO or Cu(OH)₂. Conversely, the ammonolysis of dicopper trihydroxide chloride resulted in two-phase mixtures of Cu₃N and the monoamine, Cu(NH₃)Cl under similar experimental conditions. Importantly, this pathway is applicable to afford composite materials by incorporating substrates or matrices that are resistant to ammoniation at relatively low temperatures (ca. 300 °C). We present preliminary evidence that Cu₃N/SiO₂ nanocomposites (up to ca. 5 wt.% Cu₃N supported on SiO₂) could be prepared from CuCl₂·2H₂O and urea starting materials following similar reaction steps. Evidence suggests that in this case Cu₃N nanoparticles are confined within the porous SiO₂ matrix.     

晶种协同廉价有机模板导向合成高纯度MCM-49沸石

采用廉价低毒性的环己胺（CHA）作为有机模板剂,并合理添加少量MCM-49沸石晶种,在静态水热条件下成功合成了高纯度MCM-49沸石.研究了起始凝胶组成（如Al₂O₃/SiO₂,H₂O/SiO₂,CHA/SiO₂,晶种/SiO₂,Na₂O/SiO₂）、晶化温度和时间等因素对合成MCM-49沸石的影响.通过XRD、SEM、N₂吸附、固体²⁷Al和²⁹Si MAS NMR等手段表征产物,结果表明合成的MCM-49沸石具有良好的结晶度、均匀的晶体尺寸、高比表面积和纯的四配位Al³⁺物种.热重差热分析（TG-DTA）和固体¹³C MAS NMR表征结果证实CHA是作为模板剂填充在沸石产物的孔道内.这种合成MCM-49的方法具有廉价和低毒性的特点,对其产业应用有潜在的重要价值.     

以四乙基氢氧化铵为模板并通过转晶法合成高硅铝比的SSZ⁃13沸石分子筛

使用四乙基氢氧化铵为有机模板剂,以低硅铝比(nSiO2/nAl2O3)的Y分子筛为铝源,通过转晶法制备结晶度良好的SSZ?13沸石分子筛。从凝胶配比方面考察了不同原料组成对分子筛合成的影响,并通过X射线衍射(XRD)、扫描电子显微镜(SEM)及电感耦合等离子体(ICP)表征水热反应过程中的物相、形貌、硅铝比等变化,揭示分子筛合成过程。氨选择性催化还原(NH3?SCR)反应显示该分子筛具有优异的催化活性,为其工业上的广泛应用提供了可能性。     

Hydrogenation of Benzonitrile on Sn-Pt/SiO2 Catalysts Prepared by Introducing SnEt4 to Pt/SiO2: Role of Tin

Liquid phase hydrogenation of benzonitrile was studied over Sn-Pt/SiO₂ catalysts prepared by introducing tetraethyl tin onto the 3 wt.% Pt/SiO₂ catalyst. Tin content of the catalysts ranged from 0.05 to 0.63 wt.%, whereas Sn/Pt surface atomic ratios determined by chemisorption measurements were between 0.1 to 3.5. Dibenzylamine selectivity influenced to a small extent by the level of conversion and the Sn/Pt ratio wasca. 75 %. The addition of tin to Pt in the range of (Sn/Pt)_surface = 0.50–1.25 led to an increase in the turnover frequency (TOF) by a factor of 2. TOF showed a maximum at a surface atomic ratio of Sn/Pt = 1. The enhancement of catalyst activity upon the addition of tin is explained by the formation of Sn⁺-Pt ensemble sites on the surface of bimetallic nanoclusters. It is suggested that highly dispersed positively charged tin species, by polarizing the triple bond, enhance the reactivity of the -CN group. Calcination at 300°C followed by re-reduction of the catalysts resulted in a monotonic decrease of specific activity with increasing Sn/Pt ratio.     

Bismuth as an additive modifying the selectivity of palladium catalysts

The influence of bismuth addition on the activity and selectivity of palladium catalysts supported on SiO₂ in the reaction of glucose oxidation to gluconic acid was studied. The catalysts modified with Bi show much better selectivity and activity than palladium catalysts. The XRD studies proved the presence of intermetallic compounds BiPd and Bi₂Pd, which probably increase activity and selectivity of PdBi/SiO₂ catalysts in the oxidation of glucose. The TPO studies of catalysts containing 5 wt.% Pd/SiO₂, 3 wt.% Bi/SiO₂ and 5 wt.% Pd–5 wt.% Bi/SiO₂ show that palladium oxidation occurs at much higher temperatures than in the case of bismuth. The maximum rate of Pd oxidation occurs at around 580 K while the maximum rate of Bi oxidation takes place at around 430 K. Considering the above facts, a reaction involving bimetallic catalysts in oxidizing atmosphere at 333 K should not lead to surface oxidation of palladium and thus their deactivation.     

Highly Active and Stable Pt-USY in the Low-Temperature de-NOx HC-SCR

Selective catalytic reduction of NO_x by propene has been investigated on Pt-USY and compared to other Pt-catalysts. The catalyst was characterized by XRD, Ar adsorption at 87 K, TEM, and CO chemisorption, and tested in a gas mixture system in excess oxygen. Pt-USY shows an excellent activity in the reaction, with a molar NO_x conversion of 90% at 475 K. Stability during time-on-stream and resistance to SO₂ and H₂O in the feed stream has also been investigated. Pt-USY performs better under lean-burn conditions than other Pt-catalysts on ZSM-5, Al₂O₃, or SiO₂. The selectivity to N₂ was similar for all the catalysts (30%), the other major product being N₂O.     

Rh Inclusion in Sol-Gel SiO2. Effects of Rh Precursors on Metal Dispersion and SiO2-Rh Thermal Behavior

RhCl₃·nH₂O and [RhCl(C₂H₄)₂]₂ are used as precursors for the preparation of 1%Rh in sol-gel derived SiO₂. The gelling process of Si(OEt)₄ is carried out in the absence of solvent and under strong acid catalysis. The thermal behavior of Rh precursors, of SiO₂ gel and Rh-SiO₂ composites is independently studied by analysing organic species released at definite temperature intervals and concomitantly collecting infrared, XPS, TEM, XRD and porosity data. Results indicate that nanometric Rh particles may be obtained from [RhCl(C₂H₄)₂]₂, their dispersion being homogeneous, dense and stable up to 250°C, whereas RhCl₃·nH₂O affords less metallic dispersion with other crystalline Rh-species; in both cases, well-shaped Rh metal crystallites are obtained at 650°C. The different synthetic approaches used for the preparation of RhCl₃- and [RhCl(C₂H₄)₂]₂-derived samples, are invoked to account for the features of Rh dispersion obtained by mild temperature treatment. Moreover, the particular procedures for sol-gel SiO₂ synthesis are related to the high-temperature maintenance of great porosity and elevated specific surface area.     

Preparation of uniform and nano‐sized NaA zeolite using silatrane and alumatrane precursors

Nano‐sized Na A zeolite was successfully synthesized via the sol–gel process and microwave techniques. The synthesis parameters, such as hydroxide ion concentration, seed amount, as well as heating time and temperature, were studied to obtain the most uniform and very small sized NaA zeolite using the composition of SiO₂:Al₂O₃:xNa₂O:410H₂O; 3 ≤ x ≤ 6. It was found that hydroxide ion concentration affects the crystal size and heating time, whereas a higher amount of seed provides smaller sized NaA zeolite. The zeolite product can be synthesized using a higher temperature for a shorter time or lower temperature for a longer time. The best conditions for synthesizing the smallest size, 0.1–0.2 µm, and the most homogeneous NaA zeolite is to use the composition of SiO₂:Al₂O₃:3Na₂O:410H₂O and 3 wt% crystal seed at 80 °C microwave heating for 6 h. The synthesized NaA zeolite was characterized using XRD and SEM. Copyright © 2006 John Wiley & Sons, Ltd.     

磷酸盐辅助一步合成介孔Beta分子筛

在合成纳米Beta分子筛的体系中添加磷酸二氢钠等无机盐,通过一步晶化制备介孔Beta分子筛.纳米分子筛组装形成的二次粒子克服了传统纳米粒子难以过滤分离的问题,同时所形成的粒间介孔改善了分子在催化剂内的扩散从而提高催化反应效率.采用X射线衍射、扫描电镜、氮吸附-脱附和氨程序升温脱附等表征方法对材料进行表征,结果表明磷酸二氢钠的用量对介孔体积有很大影响.当NaH2PO4/SiO2摩尔比为0.1时,合成的材料具有较好的孔结构和酸性,并在叔丁醇与苯酚的液相烷基化反应中表现出最好的催化活性.