硝酸铈铵催化绿色合成N1-取代的二氢嘧啶酮衍生物

无溶剂、80 ~oC条件下,硝酸铈铵催化化学计量的芳香醛、乙酰乙酸乙酯(乙酰乙酸甲酯)和单取代(硫)脲三组分"一锅法"合成了N1-取代的3,4-二氢嘧啶-2(1H)-酮衍生物。考察了催化剂用量和反应温度对产率的影响。产品结构通过IR,~1H NMR,~(13)C NMR,元素分析和X-射线单晶衍射进行了确证。该合成方法具有反应时间短,条件温和,产率高,方法绿色等优点。     

硝酸铋催化三组分“一锅法”合成N1-取代的3,4-二氢嘧啶酮衍生物

无溶剂条件下,以硝酸铋为催化剂,芳香醛、β-酮酯和N-取代脲"一锅法"合成了一系列N1-取代的3,4-二氢嘧啶-2(1H)-酮衍生物。考察了原料用量、催化剂用量和反应温度对实验结果的影响。确定当芳香醛、β-酮酯和N-取代脲的摩尔比为1∶1∶1.3,催化剂用量为3 mol%,反应温度为80℃时,反应时间较短,产率较高。提出了可能的催化作用机理。产品结构经IR、~1H NMR、~(13)C NMR和元素分析进行表征。     

氯化铜催化三组分“一锅法”合成新型N1-取代3,4-二氢嘧啶酮衍生物

以二水合氯化铜为催化剂,通过等摩尔芳香醛、乙酰乙酸甲(乙)酯和N-取代脲的Biginelli缩合反应,"一锅法"合成了19个N1-取代的3,4-二氢嘧啶酮衍生物,其中11个为新化合物,其结构经~1H NMR,~(13)C NMR和MS表征。考察了催化剂用量和反应温度对产物收率的影响。结果表明最优反应条件为:催化剂用量为0.3mmol,反应温度为90℃。并对催化机理进行了探讨。     

碘化钾绿色催化合成4,6-二芳基-3,4-二氢嘧啶-2(1H)-酮（英文）

无溶剂、90℃条件下,碘化钾催化芳香醛、苯乙酮衍生物和脲三组分"一锅法"合成了一系列4,6-二芳基-3,4-二氢嘧啶-2(~1H)-酮。产品结构通过IR,~1H NMR,~(13)C NMR和元素分析进行了确证。提出了可能的催化作用机理。新方法具有反应条件清洁、温和,操作简单,反应时间短,产率高,催化剂绿色、高效等优点。     

二氧化硅负载磷钨酸催化合成3,4-二氢嘧啶-2(1H)-酮衍生物

以取代苯甲醛、乙酰乙酸乙酯和尿素为原料,以溶胶凝胶法制备二氧化硅负载的磷钨酸（H3PW12O40/SiO2）为催化剂,催化合成3,4-二氢嘧啶-2(1H)-酮,考察了三组分摩尔比、反应温度、催化剂用量及反应时间对反应收率的影响。 研究表明,H3PW12O40/SiO2是合成3,4-二氢嘧啶-2(1H)-酮的良性催化剂,在取代苯甲醛的用量为0.04 mol,反应温度为90 ℃的条件下,收率可达73.1%~88.4%。 催化剂和产品结构分别经IR、XRD、SEM和1H NMR、IR、MS等技术手段表征。     

四氯化锡催化多组分反应合成N1-取代的-4-芳基-3,4-二氢嘧啶-2(1H)-(硫)酮（英文）

80 ~oC、无溶剂条件下,以四氯化锡为催化剂,芳香醛、β-酮酯、N-取代的(硫)脲三组分通过Biginelli缩合反应合成了一系列N1-取代的-4-芳基-3,4-二氢嘧啶-2(1H)-(硫)酮。反应在较短的时间(0.2-6.0 h)内获得了较好的收率(46-94%)。底物适用范围广是该工艺的一个显著优势。产品结构通过IR,~1H NMR,~(13)C NMR和元素分析方法进行了表征。目标化合物的晶体结构通过X-射线单晶衍射进行了确证。     

氯化镉催化三组分“一锅法”合成4,6-二芳基-3,4-二氢嘧啶-2(1H)-酮的研究

在氯化镉催化作用下,以环己烷为溶剂,芳香醛、芳香酮和脲三组分"一锅法"合成了一系列4,6-二芳基-3,4-二氢嘧啶-2(1H)-酮化合物。考察了溶剂和催化剂用量对产率的影响。通过IR、1H NMR、13C NMR和元素分析对产品结构进行了表征。该合成方法具有操作简单、反应时间短、反应条件温和,产率高等优点。     

对甲基苯磺酸亚铈催化一锅法合成取代2,3-二氢-4(1H)-喹唑啉酮

以对甲基苯磺酸亚铈为催化剂,靛红酸酐、醛和铵盐或伯胺为原料,在乙醇水溶液中三组分一锅法合成了一系列单取代和双取代2,3-二氢-4(1H)-喹唑啉酮衍生物。考察了溶剂条件及催化剂用量对产率的影响。经催化剂循环研究,催化活性无明显变化。产物的结构通过熔点、IR、1H NMR、13C NMR、质谱和元素分析进行测定和结构表征。     

4-单取代-1H-1,2,3-三氮唑的合成研究

以甲氧基聚乙二醇(mPEG)为起始原料通过磺酰化、叠氮化反应合成叠氮基甲氧基聚乙二醇(mPEG-N_3,2);在铜催化下和芳香炔、脂肪炔发生1,3-偶极环加成反应合成甲氧基聚乙二醇-1,2,3-三氮唑(mPEG-1,2,3-triazoles,3);再于酸性条件下脱除甲氧基聚乙二醇(mPEG)制备4-单取代-1H-1,2,3-三氮唑(4),其结构经过MS及~1H NMR、~(13)C NMR确证。     

无溶剂条件下对甲基苯磺酸铝高效催化合成4,6-二芳基-3,4-二氢嘧啶-2(1H)-酮

以芳香醛、芳香酮和尿素为原料,对甲基苯磺酸铝为催化剂,在90_oC、无溶剂条件下“一锅法”反应,高效合成了一系列4,6-二芳基-3,4-二氢嘧啶-2(1H)-酮。产品结构通过IR,₁H NMR,₁₃C NMR和元素分析进行了表征。该方法具有操作简单、反应时间短、产率高、反应条件温和、不使用任何有机溶剂、催化剂廉价易得且可重复使用等优点,为标题化合物的合成提供了一种简便高效的绿色新途径。     

亲电硫试剂参与的2-芳基-3-硫代-2,3-二氢喹啉-4(1H)-酮的合成研究

本文报道了以(E)-1-(2-对甲苯磺酰胺基)-3-芳基丙-2-烯-1-酮(1)为底物与N-硫代丁二酰亚胺(2)通过亲电环化反应合成2-芳基-3-硫代-2,3-二氢喹啉-4(1H)-酮类化合物。以三氟化硼乙醚为催化剂(20 mol %),1,2-二氯乙烷为溶剂,反应温度为60 _oC,可以60-92%的收率得到一系列2-芳基-3-硫代-4(1H)-喹啉酮衍生物,化合物3a-k均未见文献报道,其结构均经过₁H NMR, ₁₃C NMR以及高分辨质谱进行确定。     

CoNiFe2O4@Silica-SO3H nanoparticles: New recyclable magnetic nanocatalyst for the one-pot synthesis of 3,4-dihydropyrimidin-2(1H)-ones/thiones under solvent-free conditions

A useful and green synthesis of 3,4-dihydropyrimidin-2(1H)-ones/thiones derivatives were achieved by one-pot cyclocondensation between substituted aryl aldehydes, diketone/ketoester, and urea/thiourea using magnetic CoNiFe₂O₄@Silica-SO₃H nanoparticles under solvent-free condition. The choice of this approach showed essential advantages such as short reaction time, simple work-up procedure, high activity of the catalyst, high yield of the reaction products, the magnetic properties of the catalyst, and environmentally amiable conditions. In addition, the catalyst recovered and reused four times without notable loss of its activity. The magnetic CoNiFe₂O₄@Silica-SO₃H nanoparticles were described by Fourier-transform infrared spectroscopy (FT-IR), field emission scanning electron microscope, energy dispersive X-ray spectroscopy, X-ray diffraction spectroscopy, and vibrating sample magnetometer. The products were obtained with excellent yields (88–98%). The formation of the products was confirmed and identified with their physical properties (melting points), the FT-IR, ¹H NMR, ¹³C NMR, mass spectrometry, and the elemental analysis.     

离子液体[TEAPS]HSO_4催化“一锅法”合成2-取代-1H-菲并[9,10-d]咪唑

在室温离子液体3-(三乙胺基)丙磺酸硫酸氢盐([TEAPS]HSO4)的催化作用下,由菲醌、醋酸铵和芳香醛"一锅法"合成了一系列2-取代-1H-菲并[9,10-d]咪唑化合物.实验中考察了投料比、催化剂用量、溶剂、反应时间对反应的影响,确定了最优反应条件,给出了可能的反应机理.此外催化剂可以方便的回收,且循环使用四次其催化活性并没有显著降低.目标产物经过了1HNMR,13CNMR,IR和MS确证表征.条件温和,反应时间短,产率高,且对环境友好.     

Synthesis of carbonyl compounds based on the products of addition of polyhaloalkanes to unsaturated systems. Reactions of 1-aryl-5,5-dichloropenta-2,4-dien-1-ones with ethyl acetoacetate

The reactions of 1-aryl-5,5-dichloropenta-2,4-dien-1-ones with ethyl acetoacetate in the presence of EtONa give ethyl 4-aryl-6-(2,2-dichlorovinyl)-4-hydroxy-2-oxocyclohexane-carboxylates. The structures of the reaction products were confirmed by¹H and¹³C NMR spectroscopy and by X-ray diffraction analysis. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp.     

Recyclable zinc (II) ionic liquid catalyzed synthesis of azides by direct azidation of alcohols using trimethylsilylazide at room temperature

A new efficient method has been reported for the synthesis of azides by direct azidation of alcohols with TMSN₃ in presence of recyclable task specific ionic liquid (TSIL) [bmim]ZnCl₃ as a catalyst in DCM at room temperature. Ionic liquid [bmim]ZnCl₃ was synthesized under solvent free conditions and characterized by IR, ¹H NMR, ¹³C NMR and HRMS. The Lewis acidity of catalyst was also examined using IR spectroscopy. The main features of this new methodology are high yields of products, recyclability of catalyst, scalability of reaction to gram scale and short reaction time.     

Preparation,characterization and use of sulfonylbis(1,4-phenylene)<Emphasis Type="Italic">bis</Emphasis>(sulfamic acid) as an eco-benign,efficient, reusable and heterogeneous catalyst for the synthesis of mono- and <Emphasis Type="Italic">bis</Emphasis>-chromenes

Sulfonylbis(1,4-phenylene)bis(sulfamic acid) (SPSA) is easily prepared and recognized as a new heterogeneous catalyst by the reaction of 4,4′-sulfonyldianiline with chlorosulfonic acid. This reagent was used for the synthesis of the mono- and bis-chromene derivatives. All reactions were performed under mild reaction conditions in high to excellent yields. The advantages of using the SPSA as a heterogeneous catalyst in these reactions are: being environmentally friendly, low cost, commercially availability and easy to separate from the mixture of the reaction and high reusable catalyst. Using this catalyst, results in acceptable reaction time and high yields with high purity of the obtained products without utilizing any organic solvents. The catalyst was characterized by FT-IR, ¹H NMR, ¹³C NMR, mass and TGA studies. All the products were characterized by FT-IR, ¹H, ¹³C NMR, HRMS, melting point and elemental analyses.     

N,N′‐Bis(arylmethylidene)arylmethanediamines: Suitable Precursors for the Synthesis of 1‐Pyrroline Derivatives

A simple and appropriate procedure for the synthesis of 4,5‐dihydro‐5‐hydroxy‐3H‐pyrrole‐3,3‐dicarbonitrile derivatives is reported. The advantages of this method are one‐pot conditions, high yield of products, short reaction times, and no need of metal catalyst. The structures are confirmed spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses. A plausible mechanism for this reaction is proposed (Scheme 2).     

Co(II) anchored glutaraldehyde crosslinked magnetic chitosan nanoparticles (MCS) for synthesis of 2,4,5‐trisubstituted and 1,2,4,5‐tetrasubstituted imidazoles

A simple, highly efficient and green synthesis of 2,4,5‐trisubsituted and 1,2,4,5‐tetrasubstituted imidazoles was developed using a novel MCS‐GT@Co(II) magnetically recoverable and recyclable catalyst under refluxing conditions with ethanol as a solvent. The catalyst was prepared by immobilization of chitosan onto Fe₃O₄ using glutaraldehyde as crosslinker followed by Co(II) ion immobilization via cobalt acetate. The catalyst was characterized using various techniques. For organic products determination, ¹H NMR, ¹³C NMR and Fourier transform infrared spectroscopies were used. The reaction was also tried with individual components of the catalyst, but the synergistic effect of the components in the prepared catalyst showed the highest yield and shortest reaction time.