Diamine-linked array of metal (Au,Ag) nanoparticles on glass substrates for reliable surface-enhanced Raman scattering (SERS) measurements

Metal (Au, Ag) nanoparticles (M NPs) (ca. 30–40 nm) prepared by citrate reduction method were arrayed on amine-terminated glass substrates using diamine linkers with different chain lengths. 1,4-diaminobutane (C-4 diamine) produced the uniform and densely-packed array of M NPs on glass substrates at appropriate concentration ranges, whereas diamine linkers with longer chain lengths (C-8 and C-12 diamines) produced more heterogeneous and aggregated array of M NPs. When compared to Ag NPs, Au NPs demonstrated more controllable and higher packing density due to their mono-dispersed size and higher affinity to diamine linkers. Uniformly arrayed M NPs (Au, Ag) on glass substrates exhibited high enhancement factors in SERS measurements of o-chlorothiophenol probes. Au NPs arrayed substrates exhibited an approximate power-law linearity of Raman intensity with probe concentrations (from 10⁻⁷ M to 10⁻⁴ M), demonstrating more reliable SERS substrates than Ag arrayed substrates with higher SERS activity.     

Electrochromic properties of WO3 thin film onto gold nanoparticles modified indium tin oxide electrodes

Gold nanoparticles (GNPs) thin films, electrochemically deposited from hydrogen tetrachloroaurate onto transparent indium tin oxide (ITO) thin film coated glass, have different color prepared by variation of the deposition condition. The color of GNP film can vary from pale red to blue due to different particle size and their interaction. The characteristic of GNPs modified ITO electrodes was studied by UV-vis spectroscopy, scanning electron microscope (SEM) images and cyclic voltammetry. WO₃ thin films were fabricated by sol-gel method onto the surface of GNPs modified electrode to form the WO₃/GNPs composite films. The electrochromic properties of WO₃/GNPs composite modified ITO electrode were investigated by UV-vis spectroscopy and cyclic voltammetry. It was found that the electrochromic performance of WO₃/GNPs composite films was improved in comparison with a single component system of WO₃.     

ITO/Au/ITO multilayer thin films for transparent conducting electrode applications

Transparent and conducting ITO/Au/ITO multilayered films were deposited without intentional substrate heating on polycarbonate (PC) substrate using a magnetron sputtering process. The thickness of ITO, Au and ITO metal films in the multilayered structure was constant at 50, 10 and 40 nm, respectively.Although the substrate temperature was kept constant at 70 °C, ITO/Au/ITO films were polycrystalline with an (1 1 0) X-ray diffraction peak, while single ITO films were amorphous. Surface roughness analysis indicated ITO films had a higher average roughness of 1.76 nm, than the ITO/Au/ITO film roughness of 0.51 nm. The optoelectrical properties of the ITO/Au/ITO films were dependent on the Au thin film, which affected the ITO film crystallinity. ITO/Au/ITO films on PC substrates were developed with a resistivity as low as 5.6 × 10⁻⁵ Ω cm and a high optical transmittance of 71.7%.     

Wavelength-dependent Faraday–Tyndall effect on laser-induced microbubble in gold colloid

The cavitation microbubbles in dilute gold colloids of different concentrations (2–10 ppm) induced by a focused nanosecond-pulsed laser beam were measured and characterized at different wavelengths by using the passive and active ultrasound measurements. Three colloids with gold nanoparticles (GNPs) of different sizes (10, 45, and 75 nm) were used for experiment. The results show that the lifespan of the microbubble is reduced as the concentration of GNP increases, particularly at the wavelength of 532 nm, the surface plasmon resonance (SPR) of GNP. In contrast, at the off-resonant wavelength (e.g. 700 nm), the lifespan reduction is relatively small. This wavelength-dependent cavitation is attributed to the Faraday–Tyndall effect, a strong light scattering by GNPs. A slight defocusing of the Gaussian beam in gold colloid was proposed. Hence, the waist of the focused beam increases to reduce the optical breakdown in gold colloid. For simplicity, a linear relation between the incremental waist radius of Gaussian beam and the concentration of GNP was assumed. According to this formulation, the theoretical results are consistent with the experimental ones. In addition, the dynamics of the microbubble in gold colloid measured by the active ultrasound method agree with the Rayleigh–Plesset model.     

Low temperature deposition of transparent conducting ITO/Au/ITO films by reactive magnetron sputtering

Transparent conducting indium tin oxide/Au/indium tin oxide (ITO) multilayered films were deposited on unheated polycarbonate substrates by magnetron sputtering. The thickness of the Au intermediated film varied from 5 to 20 nm. Changes in the microstructure, surface roughness and optoelectrical properties of the ITO/Au/ITO films were investigated with respect to the thickness of the Au intermediated layer. X-ray diffraction measurements of ITO single layer films did not show characteristic diffraction peaks, while ITO/Au/ITO films showed an In₂O₃ (2 2 2) characteristic diffraction peak. The optoelectrical properties of the films were also dependent on the presence and thickness of the Au thin film. The ITO 50 nm/Au 10 nm/ITO 40 nm films had a sheet resistance of 5.6 Ω/□ and an average optical transmittance of 72% in the visible wavelength range of 400-700 nm. Consequently, the crystallinity, which affects the optoelectrical properties of ITO films, can be enhanced with Au intermediated films.     

���������Լ�����������ܼ�����Ԩɢ��Ӱ���о�

在"星光Ⅱ"钕玻璃激光装置上,开展了脉宽约0.8ns、能量~70J的351nm激光在不同条件下辐照Au盘靶的实验,研究了激光光束质量对受激布里渊散射(SBS)谱的影响。SBS散射光谱测量结果表明,在激光束未匀滑条件下,SBS散射谱范围为352~360nm;在采用透镜列阵将激光束匀滑聚焦的条件下,激光等离子体密度变得更加均匀,SBS散射光谱范围变为351~351.5nm。实验数据为透镜列阵对光束的匀滑效果提供了直接支持。     

Structure of plasmonic aerogel and the breakdown of the effective medium approximation

A method for making aerogel doped with gold nanoparticles (GNPs) produces a composite material with a well-defined localized surface plasmon resonance peak at 520?nm. The width of the extinction feature indicates the GNPs are well dispersed in the aerogel, making it suited to optical study. A simple effective medium approximation cannot explain the peak extinction wavelengths. The plasmonic field extends on a scale where aerogel cannot be considered isotropic, so a new model is required: a 5?nm glass coating on the GNPs models the extinction spectrum of the composite material, with air (aerogel), methanol (alcogel), or toluene filling the pores.     

Photoluminescence characteristics of ZnGa2O4 thin films prepared by chemical solution method

Zinc gallate (ZnGa₂O₄) thin film phosphors have been formed on ITO glass substrates by a chemical solution method with starting materials of zinc acetate dihydrate, gallium nitrate hydrate and 2-methoxiethanol as a solution. The thin films were firstly dried at 100 °C and fired at 500 °C for 30 min and then, annealed at 500 °C and 600 °C for 30 min under an annealing atmosphere of 3% H₂/Ar. XRD patterns of the thin film phosphors showed (311) and (220) peak indicating ZnGa₂O₄ crystalline phase in which all the (311) peaks of the film phosphors synthesized on ITO glass and soda-lime glass revealed high intensity with increasing annealing temperature from 500 °C to 600 °C. The ZnGa₂O₄ thin film phosphors represented marked change in AFM surface morphologies according to an annealing temperature under an annealing atmosphere (3% H2/Ar). The film phosphor, annealed at 600 °C, showed the embossed pattern with relatively regular spacing in AFM surface morphology. The ZnGa₂O₄ thin film phosphors formed on ITO glass, which were annealed at different temperatures and showed distinctive spectra with peak wavelengths of 434 nm and 436 nm in the blue emission region.     

Fabrication and characterization of CdS-sensitized TiO<Subscript>2</Subscript> nanotube photoelectrode

CdS quantum dot (Qd)-sensitized TiO₂ nanotube array photoelectrode is synthesised via a two-step method on tin-doped In₂O₃-coated (ITO) glass substrate. TiO₂ nanotube arrays are prepared in the ethylene glycol electrolyte solution by anodizing titanium films which are deposited on ITO glass substrate by radio frequency sputtering. Then, the CdS Qds are deposited on the nanotubes by successive ionic layer adsorption and reaction technique. The resulting nanotube arrays are characterized by scanning electron microscopy, X-ray diffraction (XRD) and UV–visible absorption spectroscopy. The length of the obtained nanotubes reaches 1.60 μm and their inner diameter and wall thickness are around 90 and 20 nm, respectively. The XRD results show that the as-prepared TiO₂ nanotubes array is amorphous, which are converted to anatase TiO₂ after annealed at 450 °C for 2 h. The CdS Qds deposited on the TiO₂ nanotubes shift the absorption edge of TiO₂ from 388 to 494 nm. The results show that the CdS-sensitized TiO₂ nanotubes array film can be used as the photoelectrode for solar cells.     

Biosynthesis of gold nanoparticles using Capsicum annuum var. grossum pulp extract and its catalytic activity

Biological synthesis approach has been regarded as a green, eco-friendly and cost effective method for nanoparticles preparation without any toxic solvents and hazardous bi-products during the process. This present study reported a facile and rapid biosynthesis method for gold nanoparticles (GNPs) from Capsicum annuum var. grossum pulp extract in a single-pot process. The aqueous pulp extract was used as biotic reducing agent for gold nanoparticle growing. Various shapes (triangle, hexagonal, and quasi-spherical shapes) were observed within range of 6–37 nm. The UV–Vis spectra showed surface plasmon resonance (SPR) peak for the formed GNPs at 560 nm after 10 min incubation at room temperature. The possible influences of extract amount, gold ion concentration, incubation time, reaction temperature and solution pH were evaluated to obtain the optimized synthesis conditions. The effects of the experimental factors on NPs synthesis process were also discussed. The produced gold nanoparticles were characterized by transform electron microscopy (TEM), X-ray diffraction (XRD), energy dispersive X-ray (EDS) and Fourier Transform infrared spectroscopy (FTIR). The results demonstrated that the as-obtained GNPs were well dispersed and stable with good catalytic activity. Biomolecules in the aqueous extract were responsible for the capping and stabilization of GNPs.     

Optical properties of Au–Ag core–shell nanorods on glass and ITO substrates

Gold-silver core–shell nanorods were deposited on glass and ITO plates. SEM observations indicated that some of these nanorods were standing on the ITO plate. The extinction spectra of the plates were measured by varying the angles of incidence of p-polarized monitor light. Deconvolution of these spectra gave six bands in the visible region. The dependence of the peak intensities on the incident angles indicated that the bands at 390 and 420 nm originated from surface plasmon bands in the transverse direction of the nanorods.     

Dependence of intermediated noble metals on the optical and electrical properties of ITO/metal/ITO multilayers

Sn doped In₂O₃ (ITO) single layer and a sandwich structure of ITO/metal/ITO (IMI) multilayer films were deposited on a polycarbonate substrate using radio-frequency and direct-current magnetron sputtering process without substrate heating. The intermediated metal films in the IMI structure were Au and Cu films and the thickness of each layer in the IMI films was kept constant at 50 nm/10 nm/40 nm. In this study, the ITO/Au/ITO films show the lowest resistivity of 5.6 × 10⁻⁵ Ω cm.However the films show the lower optical transmission of 71% at 550 nm than that (81%) of as deposited ITO films. The ITO/Cu/ITO films show an optical transmittance of 54% and electrical resistivity of 1.5 × 10⁻⁴ Ω cm. Only the ITO/Au/ITO films showed the diffraction peaks in the XRD pattern. The figure of merit indicated that the ITO/Au/ITO films performed better in a transparent conducting electrode than in ITO single layer films and ITO/Cu/ITO films.     

Acoustically induced light gyration in nickel nanoparticles

Circularly polarized acoustically induced light gyration (AILG) in nickel nanoparticles (NiNPs) attached to indium tin oxide (ITO) substrates was observed to be enhanced by nanosecond UV laser excitation at a wavelength in the surface plasmon resonance region. The AILG was observed during exposure to two acoustical waves with frequencies of 2 and 4 MHz and power densities of up to 5 W/cm². The maximum value of the AILG observed for NiNPs of average size ca. 8.7 nm, attached to an ITO substrate was about 2.8°/mm without UV-light illumination. Additional irradiation by 5 ns pulse UV laser light (λ: 337 nm) at the surface plasmon resonance region was found to favour the additional enhancement of the AILG up to 11°/mm. The effect was optimized at a temperature of 120 K. This increase was not observed when the size of NiNPs was 16.8 nm.     

Fabrication of nanoporous AuPt nanoparticles modified indium tin oxide electrode and their electrocatalytic effect

This paper describes the synthesis of nanoporous AuPt nanoparticles (np-AuPt NPs) by galvanic replacement reactions that involve large-sized silver nanoparticles (Ag NPs) electrodeposited upon an indium tin oxide (ITO) film glass as a sacrificial template. Compared to a previous synthetic route based on the formation and dealloying of Ag/Au alloy nanoparticles, this method can easily fabricate nanoporous Au nanoparticles (np-Au NPs), as well as nanoporous AuPt nanoparticles. Structural characterization indicated that the products had a particle size of ～170 nm with a ligament size of tens of nanometers. The fabricated np-Au NPs/ITO and np-AuPt NPs/ITO electrode were also tested and compared for the oxidation of hydrogen peroxide in a phosphate buffer solution (pH 7.0). The np-AuPt NPs/ITO electrode showed a much higher electrocatalytic efficiency and detection sensitivity to hydrogen peroxide than the np-Au NPs/ITO electrode.     

Laser direct patterning induced the tunable optical properties of indium tin oxide micro-hole arrays films

Here we introduce a facile method to fabricate patterned indium tin oxide (ITO) thin films via selective laser ablation at ambient conditions. By scanning the ITO thin films with focused Nd: YAG pulsed laser, the ITO thin films were selective ablated and patterned without using any conventional chemical etching or photolithography steps. Then we investigated the effects of scanning rate for the structure, morphology and optical properties of patterned ITO thin film. These results indicate that the epsilon-near-zero (ENZ) wavelength of ITO thin films can be tuned from 1100 nm to 1340 nm by adjusting the period of the micro-hole array in microstructure. The nonlinear absorption response of patterned ITO films was about 2.85 time than of the as-deposited ITO thin film. Additionally, the results of the Finite-Difference Time-Domain (FDTD) simulation are in good agreement with those of the experiments.     

金银纳米粒子的电化学性质及联苯胺的SERS研究

采用柠檬酸钠还原氯金酸,硼氢化钠还原硝酸银分别制备了较小粒径的金、银纳米粒子。运用紫外可见吸收光谱(UV-Vis)、扫描电子显微镜(SEM)、循环伏安法(CV)对金、银纳米粒子进行了表征。结果表明：所得金、银纳米粒子粒径分别约为16和10 nm,并能以亚单层形式组装于导电玻璃(ITO)表面;CV图显示金、银纳米粒子分别有一对不对称的氧化还原峰,而且纳米粒子的浓度对其氧化还原电位存在一定的影响。采用自组装方法,以联苯胺为偶联分子, 在粗糙金基底表面构筑了金/银纳米粒子的双层有序结构。表面增强拉曼光谱研究表明, 在有序金银纳米粒子组装体中偶联分子的拉曼散射得到了增强。     

基于金颗粒自组装烷基硫醇为缓冲层的有机太阳能电池

有机活性层和无机电极的界面修饰影响到有机太阳能电池性能。本文引入金纳米颗粒自组装烷基硫醇,改善有机/无机的界面。制备“ITO/金颗粒-硫醇自组装缓冲层/聚3-己基噻吩(P3HT)∶[6,6]-苯基-C61-丁酸甲酯(PCBM)/LiF/Al电极”结构的器件。自组装硫醇防止了因金颗粒与活性层直接接触导致的激子猝灭效应。我们研究了金纳米颗粒自组装不同链长的烷基硫醇对器件性能的影响,烷基硫醇的烷基链越长,硫醇对金颗粒的覆盖性越好,器件的短路电流越高。金纳米颗粒自组装十二烷基硫醇,短路电流J_SC由5.19 mA·cm-2提升到6.24 mA·cm-2,提高了20%。     

ITO/Au/ITO multilayer thin films on transparent polycarbonate with enhanced EMI shielding properties

ITO/Au/ITO multilayer thin films were deposited onto polycarbonate substrate via magnetron sputtering technique without intentional heating. The deposition times of both ITO and Au layers were studied to optimize the overall transparency and conductivity. As-prepared thin films were characterized using X-ray diffraction analysis, secondary ion mass spectroscopy, scanning and transmission electron microscopy, atomic force microscopy and physical property measurement system. The optical measurement results revealed that the transmittance of the films were enhanced by increasing the gold deposition time up to 15 s. Beyond this point, further increasing the duration caused a decrease in optical transmittance. Upon optimization of the Au deposition time, the deposition duration of ITO layers was also studied to increase electromagnetic interference (EMI) shielding effectiveness (SE). Maximum EMI SE in this work was measured as 26.8 dB, yielding 99.8% power attenuation, which was verified by simulation results.     

Effect of different pH values on growth solutions for the ZnO nanostructures

In this study, high quality zinc oxide (ZnO) nanostructures were synthesized on glass slide substrates using modified chemical bath deposition (M-CBD) method at low temperature. Through the M-CBD technique the air bubbles will be injected into aqueous growth solution. The RF magnetron sputtering method was utlized to grow ZnO seed layer on the glass substrates. The effect of different pH values of aqueous growth solution on the morphology, elemental chemical composition, crystal structural and the optical properties of ZnO nanostructures have been investigated using field emission-scanning electron microscopy (FE-SEM), Energy dispersive analysis (EDX), X-ray diffraction (XRD), and UV-Visible Spectrometer, respectively. It was observed that altering pH values from acidic to alkaline (basic) by using ammonia solution (NH₃) induced the significant change in morphology from nanorods like ZnO to nano-amber flush rose like ZnO structures. Furthermore, increased pH values had an effect on the influence intensity of the preferred orientation plane (002) and average transmittance spectrum. Whilst the absorption band edge has been shifted to a lower energy region due to the quantum size effect. It was also found that the crystal size fluctuated between 36.30 nm and 84.33 nm with a different values of pH from 6.7 to 12. The ZnO synthesized at 6.7 of pH provided the best results regarding the high aspect ratio,structural and optical properties. At this pH value, ZnO growth revealed the nanorod structure with small diameters, size and a higher energy band gap value.     

Electrical responses and dielectric relaxations in giant permittivity NaCu3Ti3TaO12 ceramics

Conductive and highly transparent indium tin oxide (ITO) thin films were prepared on photosensitive glass substrates by the combination of sol–gel and spin-coating techniques. First, the substrates were coated with amorphous Sn-doped indium hydroxide, and these amorphous films were then calcined at 550^∘C to produce crystalline and electrically conductive ITO layers. The resulting thin films were characterized by means of scanning electron microscopy, UV-Vis spectroscopy, X-ray photoelectron spectroscopy and spectroscopic ellipsometry. The measurements revealed that the ITO films were composed of spherical crystallites around 20 nm in size with mainly cubic crystal structure. The ITO films acted as antireflection coatings increasing the transparency of the coated substrates compared to that of the bare supports. The developed ITO films with a thickness of ∼170–330 nm were highly transparent in the visible spectrum with sheet resistances of 4.0–13.7 kΩ/sq. By coating photosensitive glass with ITO films, our results open up new perspectives in micro- and nano-technology, for example in fabricating conductive and highly transparent 3D microreactors.