Microwave absorption properties of 50% SrFe12O19–50% TiO2 nanocomposites with porosity

SrFe₁₂O₁₉–TiO₂ nanocomposites are usually used for absorbing microwaves in military and civil applications. In this work, microwave absorption properties of porous SrFe₁₂O₁₉ nanocomposites with 50% weight ratio of TiO₂ have been investigated. 50% TiO₂–50% SrFe₁₂O₁₉ nanocomposites were prepared by a controlled hydrolysis of titanium tetraisopropoxide in which SrFe₁₂O₁₉ nanoparticles were synthesized by a sol–gel auto combustion route. The morphology, crystalline structure and crystallite size of SrFe₁₂O₁₉–TiO₂ nanocomposites were characterized by field emission scanning electron microscopy and X-ray powder diffraction. The magnetic measurements were carried out with a vibrating sample magnetometer. The microwave absorption was measured by a Vector Network Analyzer. The microwave absorption results indicated that the reflection losses for specimens with 52%–56% porosity and thicknesses of 1.8, 2.1 and 2.6 mm were not very low but minimum reflection loss for a specimen with 4.2 mm thickness reached upto −33 dB.     

Synthesis of coprecipitated strontium hexaferrite nanoparticles in the presence of polyvinyl alcohol

Strontium hexaferrite (SrFe₁₂O₁₉) nanoparticles were synthesized by the chemical coprecipitation method and using polyvinyl alcohol (PVA) as a protective agent. The synthesized samples were characterized by differential thermal analysis, X-ray diffraction, scanning and transmission electron microscopy, particle size analyzer, sedimentation test and vibrating sample magnetometer. In the presence of PVA, the single-phase SrFe₁₂O₁₉ nanoparticles were obtained at low temperature of 650 °C. The average particle size of SrFe₁₂O₁₉ precursor was 15 nm, which increased to 61 nm after calcination at 650 °C. The magnetic measurements indicated that PVA decreased coercivity from 4711 to 3216 Oe with particle size reduction. The results showed that PVA as a protective agent could be effective in decreasing the particle size, calcination temperature and coercivity of SrFe₁₂O₁₉ nanoparticles.     

Synthesis of anatase titania-carbon nanotubes nanocomposites with enhanced photocatalytic activity through a nanocoating-hydrothermal process

Anatase TiO₂ nanoparticles were covalently anchored onto acid-treated multi-walled carbon nanotubes (MWNTs) through a nanocoating-hydrothermal process to obtain TiO₂-MWNTs nanocomposites. The composition and structural properties of the nanocomposites were characterized by XRD, BET, TG, TEM, HRTEM, EDX, XPS, and FTIR, and the formation of ester-bond linkage between TiO₂ nanoparticles and MWNTs was demonstrated. The enhanced photocatalytic activity of TiO₂-MWNTs nanocomposites was probed by photodegradation reaction of methylene blue under visible-light irradiation.     

Synthesis and magnetic properties of hard/soft SrFe12O19/Ni0.7Zn0.3Fe2O4 nanocomposite magnets

Magnetic nanocomposite SrFe₁₂O₁₉/Ni_0.7Zn_0.3Fe₂O₄ powders with different weight fractions of the Ni_0.7Zn_0.3Fe₂O₄ soft ferrite were synthesized by a combination of the sol–gel self-propagation and glyoxilate precursor methods. The results of magnetic measurements revealed the higher Mr/Ms ratio for the nanocomposites than that for the single phase SrFe₁₂O₁₉ which proves the existence of the intergrain exchange coupling between hard and soft magnetic phases with the exchange spring behavior. The highest Mr/Ms ratio of 0.63 was obtained in the composite consisting of 80 wt% of SrFe₁₂O₁₉ and 20 wt% Ni_0.7Zn_0.3Fe₂O₄. The microstructural studies of this sample exhibited the average dimensions of hard and soft phases about 20 nm and 15 nm, respectively which are small enough for strong exchange coupling according to the theoretical studies. The variations of the reduced remanence (Mr/Ms) with increasing the weight fraction of the soft phase could be also explained by the role of the exchange and dipolar interactions in tuning the magnetic properties of the nanocomposites.     

Preparation and characterization of polyethylene/TiO2 nanocomposites

The rheological behaviour, dispersion, crystallization behavior, mechanical properties, fracture surface morphology of polyethylene (PE)/TiO₂ nanocomposites prepared by melt compounding were investigated using rheometer, energy dispersive X-ray spectrometer (EDX), polarized microscopy, impact tester, universal testing machine and field-emission scanning electron microscopy (FE-SEM). The rheological analysis indicated a fine dispersion of TiO₂ during the melt compounding. The large scaled surface dispersion of TiO₂ nanoparticles was revealed by the EDX composition distribution maps. The introduction of 2.0 wt% TiO₂ in composites improved the mechanical properties significantly compared to neat PE, and resulted in 45% increase in notched impact strength. Moreover, the further analysis and discussion showed the mechanical properties of the composites were controlled by the dispersion conditions of TiO₂ and its nucleating effect on PE crystallization.     

The effect of 3-aminopropyltrimethoxysilane on the formation of NiFe2O4/SiO2 nanocomposites

NiFe₂O₄/SiO₂ nanocomposites were prepared using a sol–gel method with the addition of 3-aminopropyltrimethoxysilane (APS). Different phases and morphologies of NiFe₂O₄/SiO₂ nanocomposites were obtained when different amounts of APS were used. The structural properties of the products were examined by X-ray diffraction (XRD) and transmission electron microscopy (TEM). Sheet-like morphology was observed at higher molar ratio of APS to NiFe₂O₄, while spherical NiFe₂O₄/SiO₂ nanoparticles separated from each other were formed at lower molar ratio of APS to NiFe₂O₄. The magnetic properties of the nanocomposites were also investigated, indicating that the interparticle interactions exhibit strong dependence on the molar ratio of APS to NiFe₂O₄.     

Ultrasound-assisted dispersion of SrFe<Subscript>12</Subscript>O<Subscript>19</Subscript> nanoparticles in organic solvents and the use of the dispersion as magnetic cosmetics

A new method of dispersing the aggregated strontium hexaferrite (SrFe₁₂O₁₉) magnetic nanoparticles in organic solvents such as propylene glycol monomethyl ether acetate (PGMEA), propylene glycol (PG), and glycerol, by an ultrasonic bath is reported herein. The particles size of SrFe₁₂O₁₉ after treatment with the PGMEA is in the range 70–100 nm. The structure of dispersed SrFe₁₂O₁₉ was characterized using transmission electron microscopy (TEM), high resolution scanning electron microscopy (HR SEM) and thermo gravimetric analysis (TGA). This dispersed material was used for the preparation of a topical magnetic cosmetic product as follows: The dispersion of SrFe₁₂O₁₉ in PG was mixed with “Dermud-Ahava Body Cream”, an ‘oil in water’ emulsion of a Dead Sea mineral cosmetic, “AHAVA”, and the magnetic properties of the created composite were determined. The ferrimagnetic behavior of the composite has been demonstrated as being very similar to the behavior of strontium hexaferrite itself.     

Magnetic properties of hexagonal strontium ferrite thick film synthesized by sol–gel processing using SrM nanoparticles

Strontium ferrite SrFe₁₂O₁₉ (SrM) thick films have been synthesized using a spinning coating sol–gel process. The coating sol was formed from SrFe₁₂O₁₉ powders dispersed in the strontium ferrite raw sol. XRD, TEM, SEM, vibrating sample magnetometer (VSM) and ac susceptometer were employed to evaluate the structure, composition and magnetic properties of SrFe₁₂O₁₉ thick films. The results indicated that a uniform and crack-free coating of Strontium ferrite with ∼15 μm thickness can be produced with a good deal of consistency. The magnetization hysteresis loops were almost the same for magnetic fields both applied in parallel and perpendicular.     

Novel synthesis of highly ordered mesoporous Fe2O3/SiO2 nanocomposites for a room temperature VOC sensor

The controlled synthesis of mesoporous silica and metal oxide nanocomposites with a highly ordered porous structure and large specific surface area for specific applications has been an attractive topic in the field of porous materials. Herein, we introduce a novel method for the fabrication of highly ordered mesoporous structured and large specific surface area Fe₂O₃/SiO₂ nanocomposites, and consider their application in room temperature gas sensors. The mesoporous Fe₂O₃/SiO₂ nanocomposites were synthesised by a two-step method, which combines the hydrothermal growth of Fe₂O₃ nanoparticles and the microemulsion phase of Brij 56 (C₁₆EO₁₀) surfactant as templates in instantly direct-templating synthesis. This synthesis method enables the fabrication of mesoporous Fe₂O₃/SiO₂ nanocomposites without distortion of the ordered porous structure after calcination at high temperature. The synthesised materials were found to be efficient in a room temperature VOC sensor application, with good recovery.     

A novel non-thermal process of TiO2-shell coating on Fe3O4-core nanoparticles

In this work magnetite (Fe₃O₄) nanoparticles coated with titanium dioxide (TiO₂) were prepared by a novel non-thermal method. In this method, magnetite and pure TiO₂ (anatase) nanoparticles were individually prepared by the sol–gel method. After modifying the surface of magnetite nanoparticles by sodium citrate, titanium dioxide was coated on them without using conjunction or heat treatment to obtain Fe₃O₄:TiO₂ core–shell nanoparticles. XRD, EDX, SEM, TEM and VSM were used to investigate the structure, morphology and magnetic properties of the samples. The average crystallite size of the powders was measured by Scherrer's formula. The results obtained from different measurements confirm the formation of Fe₃O₄:TiO₂ core–shell nanoparticles with a decrease in saturation magnetization. Hysteresis loops of the core–shell nanoparticles show no exchange bias effects, which confirms that there is no interaction or interdiffusion at the interface.     

Phase transformation of strontium hexagonal ferrite

The phase transformation of strontium hexagonal ferrite (SrFe₁₂O₁₉) to magnetite (Fe₃O₄) as main phase and strontium carbonate (SrCO₃) as secondary phase is reported here. SrFe₁₂O₁₉ powder was obtained by a heat treatment at 250 °C under controlled oxygen flow. It was observed that the phase transformation occurred when the SrFe₁₂O₁₉ ferrite was heated up to 625 °C in confinement conditions. This transformation took place by a combination of three factors: the presence of stresses in the crystal lattice of SrFe₁₂O₁₉ due to a low synthesis temperature, the reduction of Fe³⁺ to Fe²⁺ during the heating up to 625 °C, and the similarity of the coordination spheres of the iron atoms present in the S-block of SrFe₁₂O₁₉ and Fe₃O₄. X-ray diffraction analysis confirmed the existence of strain and crystal deformation in SrFe₁₂O₁₉ and the absence of them in the material after the phase transformation. Dispersive X-ray absorption spectroscopy and Fe⁵⁷ Mössbauer spectroscopy provided evidences of the reduction of Fe³⁺ to Fe²⁺ in the SrFe₁₂O₁₉ crystal.     

Composite SiO2/TiO2 and amine polymer/TiO2 nanoparticles produced using plasma-enhanced chemical vapor deposition

Plasma-enhanced chemical vapor deposition was used to conformally coat commercial TiO₂ nanoparticles to create nanocomposite materials. Hexamethyldisiloxane (HMDSO)/O₂ plasmas were used to deposit SiO₂ or SiO_xC_yH_z films, depending on the oxidant concentration; and hexylamine (HexAm) plasmas were used to deposit amorphous amine-containing polymeric films on the TiO₂ nanoparticles. The composite materials were analyzed using Fourier-transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). These analyses reveal film composition on the nanoparticles was virtually identical to that deposited on flat substrates and that the films deposit a conformal coating on the nanoparticles. The performance of the nanocomposite materials was evaluated using UV-vis spectroscopy to determine the dispersion characteristics of both SiO_x and HexAm coated TiO₂ materials. Notably, the coated materials stay suspended longer in distilled water than the uncoated materials for all deposited films.     

Zn and Zr co-doped M-type strontium hexaferrite: Synthesis,characterization and hyperthermia application

In the present study, hard ferromagnetic (M-type strontium hexaferrite) SrFe₁₂O₁₉ was co-doped by Zn and Zr for magnetic hyperthermia applications. As a result of the high concentration of single domain SrFe₁₂O₁₉ nanoparticles (suspended in the ferrofluid), they found a large hydrodynamic diameter, which caused a long-time Brownian relaxation under the AC magnetic field. On the other hand, increasing the Zn-Zr content (low concentration of SrFe₁₂O₁₉) led to a drop in anisotropy, which coincided with a short-time N´eel relaxation. All of the substituted samples with a multi-disperse state in ferrofluid exhibited an almost equal amount of the N´eel and Brownian effects. Consequently, the magnetic saturation (M_s) was considered as the dominant factor in the specific absorption rate (SAR) of the substituted samples. Transformation to the mono-disperse state was followed by the decrease of the Brownian relaxation time and hence the increase of the SAR. The interesting point in mono-disperse state was the heat generation of pure SrFe₁₂O₁₉ under the AC magnetic field as a result of the decrement of the Brownian relaxation time.     

Solid state- and magneto-chemistry of the SrO-Fe2O3 system: III. The non-existence of single-phase “SrFe2O4”

A detailed Mössbauer investigation of 1 : 1 SrO : Fe₂O₃ has shown that a single phase with the SrFe₂O₄ composition does not exist in the SrO-Fe₂O₃ system when SrCo₃ and Fe₂O₃ are reacted in air. A multiphase assemblage of SrFe₁₂O₁₉, Sr₄Fe₆O₁₃, and SrFeO_3-x is observed in the material with an overall composition of “SrFe₂O₄”. By means of novel analyses of the complex Mössbauer spectra of the 1 : 1 SrO : Fe₂O₃ composition, all of the Fe containing phases have been identified and their respective mole percentages determined. The relative amounts of the phases present depend on the final firing temperature. The published X-ray powder data for “SrFe₂O₄” can be interpreted satisfactorilly in terms of the Mössbauer results, i.e., as a multiphase assemblage, and corresponds to a low temperature assemblage of SrFe₁₂O₁₉, Sr₄Fe₆O₁₃ and SrFeO_3-x for the overall composition of “SrFe₂O₄”.     

Simultaneous gamma, x-ray, and electron Mössbauer spectroscopy of the volume and surface magnetic structure of hexagonal M-ferrites

Direct comparative studies are made between the magnetic structures of a surface layer of thickness ～40 nm and the bulk magnetic structure of ferromagnetic single crystals of hexagonal M ferrites (BaFe₁₂O₁₉, SrFe₁₂O₁₉, PbFe₁₂O₁₉) with a magneto-plumbite structure. Measurements are made by simultaneous gamma, x-ray, and electron Mössbauer spectroscopy in order to investigate the properties of the surface layer and the bulk crystal simultaneously. Experimental data obtained with a depth resolution of ～ 10 nm show that the orientation of the magnetic moments of the iron ions (along the crystallographic c axis) does not change on approaching the surface from the crystal volume. Thus, to within an experimental error of ～ 10 nm, single crystals of the hexagonal ferrites BaFe₁₂O₁₉, SrFe₁₂O₁₉, and PbFe₁₂O₁₉ with a ferromagnetic structure do not have a “ transition” surface layer whose magnetic structure differs from that of the bulk crystal such as that which exists, with a depth of several hundred nm, in antiferromagnetic materials with weak ferromagnetism.     

On synthesis of BaFe<Subscript>12</Subscript>O<Subscript>19</Subscript>, SrFe<Subscript>12</Subscript>O<Subscript>19</Subscript>, and PbFe<Subscript>12</Subscript>O<Subscript>19</Subscript> hexagonal ferrite ceramics with multiferroid properties

We analyze the possibility of obtaining M-type hexagonal ferrites of barium, strontium, and lead with multiferroid properties with the help of ceramic technology. Using the modified ceramic technology (especially pure initial raw materials, admixture of B₂O₃, and sintering in the oxygen atmosphere), we obtained for the first time the BaFe₁₂O₁₉ and SrFe₁₂O₁₉ samples with intense multiferroid properties at room temperature. At the same time, the employed technology does not make it possible to obtain PbFe₁₂O₁₉ samples exhibiting ferroelectricity. The multiferroid characteristics of experimental samples are compared with the characteristics of classical high-temperature multiferroic BiFeO₃ and with the characteristics of BaFe₁₂O₁₉, SrFe₁₂O₁₉, and PbFe₁₂O₁₉ ferrite ceramics obtained in accordance with polymer precursor technology. We propose a mechanism explaining multiferroid properties of the hexagonal ferrite ceramic samples and note the importance of our results for applications.     

Simple sonochemical synthesis of Ho2O3-SiO2 nanocomposites as an effective photocatalyst for degradation and removal of organic contaminant

In this work, highly photocatalytically active Ho₂O₃-SiO₂ nanocomposites have been designed and applied for decomposition of methylene blue pollutant. Ho₂O₃-SiO₂ nanocomposites have been produced by new, quick and facile sonochemical process with the aid of tetramethylethylenediamine as a novel basic agent for the first time. The effect of the kind of basic agent, ultrasonic time and dosage of Ho source on the grain size, photocatalytic behavior and shape of the Ho₂O₃-SiO₂ nanocomposites have been evaluated for optimization the production condition. FESEM, EDX, FT-IR, DRS, XRD and TEM have been applied to characterize the as-produced Ho₂O₃-SiO₂ nanocomposites. Use of the as-produced Ho₂O₃-SiO₂ nanocomposites as photocatalyst via destruction of methylene blue pollutant under UV illumination has been compared. It was observed that SiO₂ has notable impact on catalytic activity of holmium oxide photocatalyst for destruction. Introducing of SiO₂ to holmium oxide can enhance destruction efficiency of holmium oxide to methylene blue pollutant under ultraviolet light.     

Electrical characterization of nylon-6 composite nanofibers

The electrical characteristics of nylon-6 nanofibers incorporated with TiO₂ and Fe₃O₄ nanoparticles were investigated. The resultant nanofibers exhibited good incorporation of nanoparticles. The impregnated TiO₂ and Fe₃O₄ nanoparticles into the nylon-6 nanofibers were confirmed by high resolution transmission electron microscopy (HR-TEM) and energy dispersive X-ray (EDX) spectroscopy studies. The electrical conductivity of the nylon-6 incorporated with TiO₂ and Fe₃O₄ composite nanofibers were higher than that of the pristine nylon-6 nanofibers. The impregnation of TiO₂ and Fe₃O₄ nanoparticles significantly enhanced the electrical property of the composite nanofibers. These polymeric/nanoparticles composite nanofibers structure may open a new direction for future organic electronics.     

Formation of submicron-sized SrFe12−xAlxO19 with very high coercivity

Submicron-sized SrFe_12−xAl_xO₁₉ (x=1.3) was formed in glass-ceramic matrix using controlled thermocrystallization of the SrO–Fe₂O₃–Al₂O₃–B₂O₃ glass and the hexaferrite powder was obtained by removing the matrix phases. The samples were characterized by X-ray diffraction, scanning electron microscopy with energy-dispersive X-ray (EDX) analysis and magnetization measurements. The glass-ceramic material exhibits very high coercivity value up to 10.18 kOe which approaches a theoretically estimated maximum value for the compound. The hexaferrite powder consists of well faceted single crystals, which adopt the shape of a truncated hexagonal bipyramid. The powder saturation magnetization value is close to the theoretically estimated one for bulk material. Crystal structure of the powder was refined by Rietveld method and distribution of Al atoms on Fe sites was determined. Al atoms occupy 41% of 2a sites, 14% of 12k sites and 5% of 4e(1/2) sites, while 4f sites are not affected.     

Deposition and characterization of binary Al2O3/SiO2 coating layers on the surfaces of rutile TiO2 and the pigmentary properties

Binary Al₂O₃/SiO₂-coated rutile TiO₂ composites were prepared by a liquid-phase deposition method starting from Na₂SiO₃·9H₂O and NaAlO₂. The chemical structure and morphology of binary Al₂O₃/SiO₂ coating layers were investigated by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, TG-DSC, Zeta potential, powder X-ray diffraction, and transmission electron microscopy techniques. Binary Al₂O₃/SiO₂ coating layers both in amorphous phase were formed at TiO₂ surfaces. The silica coating layers were anchored at TiO₂ surfaces via Si-O-Ti bonds and the alumina coating layers were probably anchored at the SiO₂-coated TiO₂ surfaces via Al-O-Si bonds. The formation of continuous and dense binary Al₂O₃/SiO₂ coating layers depended on the pH value of reaction solution and the alumina loading. The binary Al₂O₃/SiO₂-coated TiO₂ composites had a high dispersibility in water. The whiteness and brightness of the binary Al₂O₃/SiO₂-coated TiO₂ composites were higher than those of the naked rutile TiO₂ and the SiO₂-coated TiO₂ samples. The relative light scattering index was found to depend on the composition of coating layers.