Syntheses,characterizations and crystal structures of monomeric or macrocyclic compounds of di- or triorganotin (IV) moieties with 4,4′-thiodibenzenethiol

Six organotin compounds with 4,4′-thiodibenzenethiol (LH₂) of the type R_nSnL_4−nSnR_n (n = 3: R = Me 1, Ph 2, PhCH₂3, n = 2: R = Me 4, Ph 5, PhCH₂6) have been synthesized. All compounds were characterized by elemental analysis, IR and NMR (¹H, ¹³C, and ¹¹⁹Sn) spectra. The structures of compounds 1, 2, 4, 5 and 6 were also determined by X-ray diffraction analysis, which revealed that compounds 1 and 2 were monomeric structures, compounds 4, 5 and 6 were centrosymmetric dinuclear macrocyclic structures, and all the tin(IV) atoms are four-coordinated. Furthermore, supramolecular structures were also found in compounds 1, 2, 4, 5 and 6, which exhibit one-dimensional chains, two-dimensional networks or three-dimensional structures through intermolecular C–H?S weak hydrogen bonds (WHBs), non-bonded Sn?S interactions or C–H?π interactions.     

New 3d–4f supramolecular systems constructed by [Fe(bipy)(CN)4] and partially blocked lanthanide cations

The reaction of acetonitrile (1–5) and mixed acetonitrile/water 1:1 (6–9) solutions containing the cyanide-bearing [Fe(bipy)(CN)₄]⁻ building block (bipy = 2,2′-bipyridine) and the partially blocked [Ln(bpym)]³⁺ cation (Ln = lanthanide trivalent cation and bpym = 2,2′-bipyrimidine) has afforded two new families of 3d–4f supramolecular assemblies of formula [Ln(bpym)(NO₃)₂(H₂O)₃][Fe(bipy)(CN)₄] · H₂O · CH₃CN [Ln = Sm (1), Gd (2), Tb (3), Dy (4) and Ho (5)] and [Ln(bpym)(NO₃)₂(H₂O)₄][Fe(bipy)(CN)₄] [Ln = Pr (6), Nd (7), Sm (8), Gd (9)]. They crystallize in the P2₁/c (1–5) and P2/c (6–9) space groups and their structures are made up of [Fe(bipy)(CN)₄]⁻ anions (1–9) and [Ln(bpym)(NO₃)₂(H₂O)_n]⁺ cations [n = 3 (1–5) and 4 (6–9)] with uncoordinated water and acetonitrile molecules (1–5) which are interlinked through an extensive network of hydrogen bonds and π–π stacking into three-dimensional motifs. Both families have in common the occurrence of the low-spin iron(III) unit [Fe(bipy)(CN)₄]⁻ where two bipy–nitrogen and four cyanide–carbon atoms build a somewhat distorted octahedral surrounding around the iron atom [Fe–N = 1.980(3)–1.988(3) Å (1–5) and 1.988(2)–1.992(2) Å (6–9); Fe–C = 1.904(5)–1.952(4) Å (1–5) and 1.911(2)–1.948(3) Å (6–9)]. The main structural difference between both families concerns the environment of the lanthanide atom which is nine- (1–5)/10-coordinated (6–9) with a chelating bpym, two bidentate nitrate and three (1–5)/four (6–9) water molecules building distorted monocapped (1–5)/bicapped (6–9) square antiprisms. This different lanthanide environment is at the origin of the different hydrogen bonding pattern of the two families of compounds.     

A synthetic approach to palmerolides via Negishi cross coupling. The challenge of the C15–C16 bond formation

The esterification of fragment C1–C8 (2) with fragment C16–C23 (3) to give iodo derivative 4, followed by a Pd-catalysed coupling with a C9–C15 fragment (7 or 8), may provide a common precursor of most palmerolides. Ligands and reaction conditions were exhaustively examined to perform the C15–C16 bond formation via Negishi reaction. With simple models, pre-activated Pd–Xantphos and Pd–DPEphos complexes were the most efficient catalysts at RT. Zincation of the C9–C15 fragment (8) and cross coupling with 4 required 3 equiv of t-BuLi, 10 mol % of Pd–Xantphos and 60 °C.     

Efficient green procedures for the preparation of novel tetraalkynyl-substituted phthalocyanines

This work provides a successful, easy and efficient process for the preparation of metal-free 2(3),9(10),16(17),23(24)-octamethoxyphthalocyanine, [(OMe)₈PcH₂] (2), and its metal complexes [(OMe)₈PcM] (3–11) (M = Zn, Cu, Ni, Mg, Co, Fe, Ru, TiCl and RhCl) by using green energy techniques such as exposure to UV-irradiation as well as microwave irradiation. Two different routes have been used, which involve modifications to that reported in the literature. The results suggest that these techniques drastically reduce the reaction time of metallophthalocyanine [(OMe)₈PcM] (3–11) formation from 5–96 h to 5–11 min. The prepared octamethoxyphthalocyanines [(OMe)₈PcM] (2–4) (M = H₂, Zn, Cu) are used as key materials to synthesize the corresponding novel tetraalkynyl-substituted phthalocyanines 15–17.     

Magneto-structural study on a series of rhenium(IV) complexes containing biimH2, pyim and bipy ligands

Three rhenium(IV) mononuclear compounds of formulae [ReCl₄(biimH₂)] · 2DMF (1), [ReCl₄(pyim)] · DMF (2) and [ReCl₄(bipy)] (3) (biimH₂ = 2,2′-biimidazole, pyim = 2-(2′-pyridyl)imidazole, bipy = 2,2′-bipyridine and DMF = N,N-dimethylformamide) have been prepared and characterized. The crystal structure of 2 was determined by single crystal X-ray diffraction. Compound 2 crystallizes in the monoclinic system with P2₁/c as space group. The rhenium atom is six-coordinated by four Cl atoms and two nitrogen atoms from a bidentate pyim ligand [average values of Re–Cl and Re–N bonds lengths being 2.330(2) and 2.117(4) Å, respectively]. The magnetic properties were investigated from susceptibility measurements performed on polycrystalline samples of 1–3 in the temperature range 1.9–300 K. The magnetic behaviour found is typical of antiferromagnetically coupled systems, and they exhibit susceptibility maxima at 2.8 (1 and 2) and 5.6 K (3). Short Re^IV–Cl?Cl–Re^IV contacts through space account for the antiferromagnetic behaviour observed.     

Preparation, structural characterisation and electrochemical properties of iron(0) and tungsten(0) carbonyl complexes with 1-(diphenylphosphanyl)-1′-vinylferrocene and 1-(diphenylphosphanyl)-1′-(dimethylvinylsilyl)ferrocene as P-monodentate ligands

A new organometallic phosphanylalkene, 1-(diphenylphosphanyl)-1′-(dimethylvinylsilyl)ferrocene (2) was prepared and—together with 1-(diphenylphosphanyl)-1′-vinylferrocene (1)—studied as a ligand in iron- and tungsten-carbonyl complexes. The following complexes featuring the mentioned phosphanylalkenes as P-monodentate donors were isolated and characterised by spectral methods: [Fe(CO)₄(L-κP)] (4, L = 1; 5, L = 2) and trans-[W(CO)₄(L-κP)₂] (6, L = 1; 7, L = 2). In addition, the solid-state structures of 4 and 6 have been determined by single-crystal X-ray diffraction and the electrochemical properties of compounds 1, 2, 4 and 6 were studied by cyclic voltammetry at platinum electrode.     

Fe Spin crossover materials based on dissymmetrical N4 Schiff bases including 2-pyridyl and 2R-imidazol-4-yl rings: Synthesis,crystal structure and magnetic and Mössbauer properties

The synthesis and characterization of new symmetrical Fe^II complexes, [FeL^A(NCS)₂] (1), and [FeL^Bx(NCS)₂] (2–4), are reported (L^A is the tetradentate Schiff base N,N′-bis(1-pyridin-2-ylethylidene)-2,2-dimethylpropane-1,3-diamine, and L^Bx stands for the family of tetradentate Schiff bases N,N′-bis[(2-R-1H-imidazol-4-yl)methylene]-2,2-dimethylpropane-1,3-diamine, with: R = H for L^B1 in 2, R = Me for L^B2 in 3, and R = Ph for L^B3 in 4). Single-crystal X-ray structures have been determined for 1 (low-spin state at 293 K), 2 (high-spin (HS) state at 200 K), and 3 (HS state at 180 K). These complexes remain in the same spin-state over the whole temperature range [80–400 K]. The dissymmetrical tetradentate Schiff base ligands L^Cx, N-[(2-R₂-1H-imidazol-4-yl)methylene]-N′-(1-pyridin-2-ylethylidene)-2,2-R₁-propane-1,3-diamine (R₁ = H, Me; R₂ = H, Me, Ph), containing both pyridine and imidazole rings were obtained as their [FeL^Cx(NCS)₂] complexes, 5–10, through reaction of the isolated aminal type ligands 2-methyl-2-pyridin-2-ylhexahydropyrimidine (R₁ = H, 5–7) or 2,5,5-trimethyl-2-pyridin-2-ylhexahydropyrimidine (R₁ = Me, 8–10) with imidazole-4-carboxaldehyde (R₂ = H: 5, 8), 2-methylimidazole-4-carboxaldehyde (R₂ = Me: 6, 9), and 2-phenyl-imidazole-4-carboxaldehyde (R₂ = Ph: 7, 10) in the presence of iron(II) thiocyanate. Together with the single-crystal X-ray structures of 7 and 9, variable-temperature magnetic susceptibility and Mössbauer studies of 5–10 showed that it is possible to tune the spin crossover properties in the [FeL^Cx(NCS)₂] series by changing the 2-imidazole and/or C2-propylene susbtituent of L^Cx.     

Synthesis,structure, thermal studies on Zn(II), Cd(II) complexes of N-(2-pyridylmethyl)pyridine-2-carbaldimine and N-(2-pyridylmethyl)pyridine-2-methylketimine

The bivalent zinc and cadmium complexes of two Schiff bases N-(2-pyridylmethyl)pyridine-2-carbaldimine (L1), N-(2-pyridylmethyl)pyridine-2-methylketimine (L2), tridentate ligands with an N₃ chromophore and coordinating with two five-membered chelate rings, were synthesized. Complexes [Zn(L1)(NO₃)₂] (1), [Zn(L2)(NO₃)₂] (2), [Cd(L1)(NO₃)₂(H₂O)] (3) and [Cd(L2)(NO₃)₂(CH₃OH)] (4) were characterized by X-ray crystallography. In 1 and 2, Zn(II) has a distorted square-pyramidal geometry where as in 3 and 4, Cd(II) possesses a pseudo-pentagonal-bipyramidal geometry. The following trends in the bond lengths are observed: M–N_im < M–N_py; Zn–N > Zn–O; Cd–N < Cd–O. The final residues from the thermogravimetric analysis are ZnO and CdO, the SEM studies revealed, respectively, their porous and spherical natures. The average activation energy (E) for the loss of pyridine rings obtained from the Friedman fitting of the DSC data, for 1, 2, 3, and 4 are 193.8(2), 114.5(3), 127.1(4), and 63.7(3) kJ mol⁻¹ and their logarithmic pre-exponential factor (A) are 11.22, 5.31, 6.88, and 2.09, respectively.     

Non-degenerate 1,2-silyl shift in silyl substituted alkyltrimethylcyclopentadienes

The five new silanes C₅Me₃RSiMe_nCl_3 − n (n = 3, R = i-Pr (5); n = 2, R = i-Pr (6); n = 2, R = s-Bu (7); n = 2, R = cyclohexyl (8); and n = 3, R = t-Bu (9)) were synthesized by reaction of 1-alkyl-2,3,4-trimethylcyclopentadienyl lithium salts with appropriate chlorosilane and characterized by NMR, MS, and IR spectra. At elevated temperatures (250-360 K), all the silanes undergo a non-degenerate sigmatropic silyl rearrangement, which generates non-equivalent structures a and b. The presence of minor structure c was observed in compounds 5 and 7 only. The Diels-Alder cycloaddition of 5 with strong dienophiles tetracyanoethylene (TCNE), and dimethylacetylenedicarboxylate (DMAD) provides compounds 10 and 11, which confirmed isomers a and b, respectively. The free energy of activation of b → a isomerization for compounds 5-8 evaluated from variable temperature NMR spectra show only marginal influence of group R on the 1,2-silyl shift rate. Moreover, in compounds 5 and 7, the process b → a was found significantly faster than b → c process in the above-mentioned temperature range.     

Novel diaminoaluminum halides and a diaminoaluminum hydride: 1,3,2-Diazaalumina-[3]ferrocenophanes

The dilithiated derivative 2 of 1,1′-bis(trimethylsilylamino)ferrocene (1) reacts with the pyridine adducts of the aluminum trihalides AlX₃ (X = Cl, Br, I) to give the respective 1,3,2-diazaalumina-[3]ferrocenophanes (4b, c, d) as pyridine adducts. The fluoride 4a could not be obtained in this way. The reaction of 1,1′-bis(trimethylsilylamino)ferrocene (1) with the dimethyl(ethyl)amine- or pyridine adduct of aluminium trihydride gave the 1,3,2-diazaalumina-[3]ferrocenophanes (5) and (6) as the amine and pyridine adducts, respectively. Treatment of 5 with trimethyltin fluoride afforded the adduct 7 with an Al–F function. Addition of pyridine converted 7 into the desired pyridine adduct of the fluoride (4a). The molecular structures of the pyridine adducts 4a, 4b, 4c and 6 were determined by X-ray analysis. The pyridine is in the trans-position relative to the N–Si bond vectors, and temperature dependent solution-state NMR spectra prove that prominent structural features are retained in solution.     

Hypervalence in germanium compounds containing the tetracylic moiety {S(C6H3S)2O}Ge via O···Ge transannular interactions: A structural study

Treatment of R_nGeCl_4−n with {S(C₆H₃SH)₂O} (1) afforded the stable phenoxathiin-4,6-dithiolate compounds [{S(C₆H₃S)₂O}GeR₂] [n = 2; R = Et (2), Ph (3)] and [{S(C₆H₃S)₂O}GeRCl] [n = 1; R = Et (4), Ph (5)]. Treatment of GeCl₄ with 1 in benzene afforded the dichloro compound [{S(C₆H₃S)₂O}GeCl₂] (8) at 7 °C. Bromo compounds [{S(C₆H₃S)₂O}GeRBr] [R = Et (6), Ph (7)] and [{S(C₆H₃S)₂O}GeBr₂] (9) were synthesized by halogen exchange from the appropriate chloro derivative using KBr/HBr. X-ray structure determinations of diorganyl dithiolate compounds 2 and 3 revealed that germanium atom is contained in a boat–chair-shaped eight-membered central ring and displays a tetrahedral geometry. In contrast, compounds 4–6 display a boat–boat-shaped central ring with a significant intramolecular transannular O···Ge interaction. The geometry of the pentacoordinate Ge atom in these last complexes may be described as distorted trigonal bipyramidal with a 62–65% distortion displacement.     

Investigations of bis(methyltetrazolyl)triazenes as nitrogen-rich ingredients in solid rocket propellants – Synthesis,characterization and properties

The energetic nitrogen-rich compounds 1,3-bis(1-methyltetrazol-5-yl)triaz-1-ene (4) and 1,3-bis(2-methyltetrazol-5-yl)triaz-1-ene (5) were synthesized by diazotation of 1-methyl-5-aminotetrazole (2) and 2-methyl-5-aminotetrazole (3), respectively, by using half an equivalent of sodium nitrite. The reaction of 4 and 5 with diluted ammonia solution yields ammonium bis(1-methyltetrazol-5-yl)triazenate (6) and ammonium bis(2-methyl-tetrazol-5-yl)triazenate (7). Treating of 4 and 5 with aqueous sodium hydroxide solution yields sodium bis(1-methyltetrazol-5-yl)triazenate (8) and sodium bis(2-methyltetrazol-5-yl)triazenate (9) almost quantitative. Compounds 8 and 9 were methylated using methyl iodide and dimethyl sulfate, respectively, originating bis(1-methyltetrazol-5-yl)-3-methyltriaz-1-ene (10) and bis(2-methyltetrazol-5-yl)-3-methyltriaz-1-ene (11). The products 4–11 were characterized by Raman, IR, multinuclear NMR and UV–Vis spectroscopy, mass spectrometry, elemental analysis and differential scanning calorimetry. The structures of the crystalline state of 4 · H₂O, 5, 8 · MeOH, 10 and magnesium bis(2-methyltetrazol-5-yl)triazenate (12) were determined by low temperature single crystal X-ray diffraction. The heats of formation Δ_fH^° of 4–7, 10 and 11 were calculated using energies of combustion Δ_cU^° determined by bomb calorimetry, resulting in strongly endothermic values. With these data and by using calculated (4, 5, 10) as well as measured (6, 7, 11) crystal densities, several detonation parameter (heats of explosion, detonation pressure, detonation velocity, explosion temperature) were calculated by the explo5 software. In addition, the specific impulse of different propellant mixtures of the most promising compound 6 with ammonium dinitramide (ADN) were computed. Furthermore the n-octanol/water partition coefficients of 4, 5, 6 and 7 were determined and the long-term stability of 6 was tested by thermal safety calorimetry. Lastly the sensitivities toward impact and friction as well as electrical discharge were determined by the BAM drophammer, friction tester and a small scale electrical discharge tester.     

Phosphorus–nitrogen compounds: Part 19. Syntheses,structural and electrochemical investigations,biological activities,and DNA interactions of new spirocyclic monoferrocenylcyclotriphosphazenes

The reactions of hexachlorocyclotriphosphazatriene, N₃P₃Cl₆, with N-alkyl-N-ferrocenylmethylethylene diamines, FcCH₂NH(CH₂)₂NHR₁ [R₁ = Me (1) and Et (2)], and sodium [3-(N-ferrocenylmethylamino)-1-propanoxide] (3) produce spirocyclic monoferrocenyl tetrachlorophosphazenes (1a–3a). The tetrapyrrolidinophosphazenes (1b–3b) are prepared from the reactions of corresponding phosphazenes (1a–3a) with excess pyrrolidine. The reaction of 1a with excess morpholine affords geminal-morpholino phosphazene (1c), whilst the reactions of 2a and 3a give diethylaminotrimorpholino (2c) and fully substituted morpholino products (3c), respectively. The structural investigations of the compounds are examined by Fourier transform IR, MS, ¹H, ¹³C, ³¹P NMR, DEPT, HETCOR, and HMBC techniques. The crystal structures of 3b and 3c are determined using X-ray crystallography. Cyclic voltammetric and chronoamperometric data show that compounds 1a–3a, 1b–3b, and 1c–3c exhibit electrochemically reversible one-electron oxidation of Fc redox centers which are hardly affected by the substituents on the phosphazene ring. The compounds 1b, 2b, 3b, and 3c are screened for antibacterial activities against Gram-positive and Gram-negative bacteria and for antifungal activities against yeast strains. In addition, the antituberculosis activities (in vitro) of these compounds are evaluated against INH-susceptible reference strain M. tuberculosis H37Rv, and six multi-drug resistant clinical M. tuberculosis isolates. Compound 2b is found to be the most active against the susceptible the reference strain. In addition, 1b, 2b, and 3c are active against all the multidrug-resistant clinical isolates at the highest concentrations. Gel electrophoresis data indicate that the compounds promote the formation of strand breaks in plasmid DNA. Almost all the concentrations lost of supercoiled DNA suggests that the compound 3b is very efficient plasmid-modifier. The compounds inhibit BamHI cleavage of pUC18 DNA while restricting HindIII.     

The new dispirobino and dispiroansa spermine derivatives of cyclotriphosphazenes

In this study, the crystal structures of the dispiroansa spermine derivatives of cyclotriphosphazene are characterised for the first time. The reaction of spiro-, gem-disubstituted cyclotriphosphazene derivatives, N₃P₃Cl₄R₂ [R = NHPh, (HN(CH₂)₃NH)_0.5, (OCH₂C(CH₃)₂CH₂O)_0.5], (1–3), with spermine (4), in aprotic solvents such as CH₂Cl₂ results in a series of dispirobino spermine derivatives of cyclotriphosphazene (5a, 6a, 7), namely spermine bridged compounds. Whereas, in protic solvents such as CHCl₃ give, dispiroansa derivatives (8–10) namely tetracyclic cyclotriphosphazene. The new series of dispirobino and dispiroansa spermine derivatives of cyclotriphosphazene (5a, 6a, 7–10) have been characterised by elemental analysis, mass spectrometry, X-ray (for 5a, 8, 10) and ¹H, ³¹P NMR spectroscopies.     

Synthesis, characterization and Schlenk equilibrium studies of methylmagnesium compounds with O- and N-donor ligands - the unexpected behavior of [MgMeBr(pmdta)] (pmdta = N,N,N′,N″,N″-pentamethyldiethylenetriamine)

MgMe₂ (1) was found to react with 1,4-diazabicyclo[2.2.2]octane (dabco) in tetrahydrofuran (thf) yielding a binuclear complex [{MgMe₂(thf)}₂(μ-dabco)] (2). Furthermore, from reactions of MgMeBr with diglyme (diethylene glycol dimethyl ether), NEt₃, and tmeda (N,N,N′,N′-tetramethylethylenediamine) in etheral solvents compounds MgMeBr(L), (L = diglyme (5); NEt₃ (6); tmeda (7)) were obtained as highly air- and moisture-sensitive white powders. From a thf solution of 7 crystals of [MgMeBr(thf)(tmeda)] (8) were obtained. Reactions of MgMeBr with pmdta (N,N,N′,N″,N″-pentamethyldiethylenetriamine) in thf resulted in formation of [MgMeBr(pmdta)] (9) in nearly quantitative yield. On the other hand, the same reaction in diethyl ether gave MgMeBr(pmdta) · MgBr₂(pmdta) (10) and [{MgMe₂(pmdta)}₇{MgMeBr(pmdta)}] (11) in 24% and 2% yield, respectively, as well as [MgMe₂(pmdta)] (12) as colorless needle-like crystals in about 26% yield. The synthesized methylmagnesium compounds were characterized by microanalysis and ¹H and ¹³C NMR spectroscopy. The coordination-induced shifts of the ¹H and ¹³C nuclei of the ligands are small; the largest ones were found in the tmeda and pmdta complexes. Single-crystal X-ray diffraction analyses revealed in 2 a tetrahedral environment of the Mg atoms with a bridging dabco ligand and in 8 a trigonal-bipyramidal coordination of the Mg atom. The single-crystal X-ray diffraction analyses of [MgMe₂(pmdta)] (12) and [MgBr₂(pmdta)] (13) showed them to be monomeric with five-coordinate Mg atoms. The square-pyramidal coordination polyhedra are built up of three N and two C atoms in 12 and three N and two Br atoms in 13. The apical positions are occupied by methyl and bromo ligands, respectively. Temperature-dependent ¹H NMR spectroscopic measurements (from 27 to −80 °C) of methylmagnesium bromide complexes MgMeBr(L) (L = thf (4); diglyme (5); NEt₃ (6); tmeda (7)) in thf-d₈ solutions indicated that the deeper the temperature the more the Schlenk equilibria are shifted to the dimethylmagnesium/dibromomagnesium species. Furthermore, at −80 °C the dimethylmagnesium compounds are predominant in the solutions of Grignard compounds 4-6 whereas in the case of the tmeda complex7 the equilibrium constant was roughly estimated to be 0.25. In contrast, [MgMeBr(pmdta)] (9) in thf-d₈ revealed no dismutation into [MgMe₂(pmdta)] (12) and [MgBr₂(pmdta)] (13) even up to −100 °C. In accordance with this unexpected behavior, 1:1 mixtures of 12 and 13 were found to react in thf at room temperature yielding quantitatively the corresponding Grignard compound 9. Moreover, the structures of [MgMeBr(pmdta)] (9c), [MgMe₂(pmdta)] (12c), and [MgBr₂(pmdta)] (13c) were calculated on the DFT level of theory. The calculated structures 12c and 13c are in a good agreement with the experimentally observed structures 12 and 13. The equilibrium constant of the Schlenk equilibrium (2 9c ? 12c + 13c) was calculated to be K_gas = 2.0 × 10⁻³ (298 K) in the gas phase. Considering the solvent effects of both thf and diethyl ether using a polarized continuum model (PCM) the corresponding equilibrium constants were calculated to be K_thf = 1.2 × 10⁻³ and K_ether = 3.2 × 10⁻³ (298 K), respectively.     

Infinite chains constructed from flexible bis(benzimidazole)-based ligands

Two neutral ligands, L¹ · 2H₂O and L² · H₂O, and seven complexes, [Cu(pmb)₂(L¹)] (1), [Cu(pmb)₂(L²)] (2), [Cu(Ac)₂(L²)] · 4H₂O (3), [Cu(4-aba)₂(L²)] (4), [Ag(4-ts)(L¹)(H₂O)] (5), [Ag₂(epes)₂(L¹)] · 2H₂O (6), [Ag(1,5-nds)_0.5(L²)] · 0.5C₂H₅OH · H₂O (7) [where L¹ = 1,1′-(1,4-butanediyl)bis(2-methylbenzimidazole); L² = 1,1′-(1,4-butanediyl)bis(2-ethylbenzimidazole), pmb = p-methoxybenzoate anion; Ac = acetate anion; 4-aba = 4-aminobenzoate anion; 4-ts = p-toluenesulfonate anion; epes = N-(2-hydroxyethyl)piperazine-N′-(2-ethanesulfonate) anion; 1,5-nds = 1,5-naphthalenedisulfonate anion], have been synthesized and characterized by elemental analysis, IR, and single-crystal X-ray diffraction. The L¹ and L² ligands in compounds 1–7 act as bridging ligands, linking metal ions into chain structures. The chains in compounds 3, 4 and 6 interlace with each other by hydrogen bonds to generate 3D supramolecular structures. In compound 5, π–π interactions between adjacent L¹ ligands hold the chains to a supramolecular layer. In compound 7, the sulfonate anions act as counterions in the framework. The thermal stabilities of 3, 6 and 7, and the luminescent properties for 5–7 in the solid states are also discussed.     

Conversion of novel palladacycles into oxopyrrolo[3,4-b]quinolines

The quinolinylcyclopalladated complexes 3a–b were synthesised in good yields (81% and 77%) by the insertion reaction of the prepared dinuclear palladium complexes [Pd(C,N-2-C₉H₄N-CHO-3-R-6)Cl(PPh₃)]₂ [(R = H (2a), R = OMe (2b)] with isonitrile XyNC (Xy = 2,6-Me₂C₆H₃). The cyclopalladated complexes 3a–b were also obtained in low yields (39% and 33.5%) via a one pot oxidative addition reaction of quinoline chloride 1a–b with isonitrile XyNC:Pd(dba)₂ (4:1). The reactions of 3a–b with Tl(TfO) (TfO = triflate, CF₃SO₃) in the presence of H₂O or EtOH causes depalladation reactions of the complexes to provide the corresponding organic compounds 4a–b, 5a–b and 6a–b in yields (41%, 27% and 18–19%). The products were characterized by satisfactory elemental analyses and spectral studies (IR, ¹H, ¹³C and ³¹P NMR). The crystal structures of 2a, 3a and 3b were determined by X-ray diffraction studies.     

Synthesis and characterization of water-soluble palladium(II)-functionalized diphosphine complexes

Water-soluble functionalized bis(phosphine) ligands L (a–h) of the general formula CH₂(CH₂PR₂)₂, where for a: R = (CH₂)₆OH; b–g: R = (CH₂)_nP(O)(OEt)₂, n = 2–6 and n = 8; h: R = (CH₂)₃NH₂ ( Scheme 1), have been prepared photochemically by hydrophosphination of the corresponding 1-alkenes with H₂P(CH₂)₃PH₂. Water-soluble palladium complexes cis-[Pd(L)(OAc)₂] (1–8) were obtained by the reaction of Pd(OAc)₂ with the ligands a–h in a 1:1 mixture of dichloromethane:acetonitrile. The water-soluble phosphine ligands and their palladium complexes were characterized by IR, ¹H and ³¹P NMR. A crystallographic study of complex 1 shows that the Pd(II) ion has a square planar coordination sphere in which the acetate ligands and the diphosphine ligand deviate by less than 0.12 Å from ideal planar.     

Coordination modes of 3-hydroxypicolinic acid: Synthesis and structural characterization of polymeric mercury(II) complexes

Novel mercury(II) compounds of 3-hydroxypicolinic acid (HpicOH; IUPAC name: 3-hydroxy-2-pyridinecarboxylic acid) were synthesized and characterized. HgCl(picOH) (1) and HgBr₂(HpicOH) (2) were obtained as reaction products from the reaction of the corresponding mercury(II) halide with HpicOH, irrespective of the molar ratio of the reactants. From the reaction of HpicOH and mercury(II) acetate, Hg(picOH)₂ (3) was obtained, while mercury(II) nitrate monohydrate gave the 1/1 solvate with water Hg(picOH)₂ · H₂O (3a). Infrared, ¹H and ¹³C NMR spectroscopic data were analyzed for complexes 1, 2 and 3. X-ray crystal structure analysis of 1 and 2 revealed their polymeric nature and different coordination modes of HpicOH. In 1 the deprotonated picolinic acid is N,O-chelating and bridging, while in 2 HpicOH is a O-monodentate weakly bound ligand. Compound 1 consists of HgCl(picOH) moieties with two linear covalent bonds, Hg–N 2.143(4) and Hg–Cl 2.298(1) Å, and four additional Hg?O contacts (2.460(3)–2.904(3) Å) in which both oxygen atoms from the carboxylic group are bridging and involved in coordination to three neighboring mercury atoms, thus forming infinite layers. The coordination of mercury is 2 + 4. 2 consists of {HgBr₂(HpicOH)} moieties, which are linked into chains by means of mercury to bromine secondary long range interactions. The coordination sphere of mercury can be described as irregular 2 + 3 formed by two covalently bonded bromine atoms (Hg–Br 2.277(1) and 2.366(1) Å), two bridging bromine atoms (Hg?Br 3.309(1) and 3.247(1) Å) and by the HpicOH ligand attached to mercury in the zwitterionic form via the carboxylic oxygen atom (Hg?O 2.602(7) Å).