Electrochemical reduction of the lanthanide ions: Part II. Second reduction step of europium(III), ytterbium(III) and samarium(III) in acidic tetramethylammonium perchlorate solution

The second reduction step of Eu(III), Yb(III) and Sm(III) in 0.04 M tetramethylammonium perchlorate in the pH range 1.8–7 was investigated by cyclic voltammetry and d.c. polarography. The proposed reaction scheme at large hydrogen ion/lanthanide ion concentration ratios involves the reduction of the lanthanide(II) ion to the metallic state accompanied by a surface catalytic reaction in which the reactant is regenerated and also hydroxyl ions are formed which induces the precipitation of lanthanide(II) hydrous oxide on the electrode surface. This lanthanide(II) hydroxide is reduced at more negative potentials than the hydrated lanthanide(II) species. At lower hydrogen ion/lanthanide ion concentration ratios a preceding chemical reaction, probably involving hydrolyzed lanthanide(II) species, becomes rate determining.     

Uptake of Au(III) Ions by Aluminum Hydroxide and Their Spontaneous Reduction to Elemental Gold (Au(0))

The behavior of AuCl(4)(-) ions during the formation of aluminum hydroxide at pH 6 was examined. With an increase in NaCl concentration, the content of gold taken up by aluminum hydroxide decreased, suggesting that chloro-hydroxy complexes of Au(III) ion were taken up due to the formation of Al-O-Au bonds. It was found unexpectedly that the Au(III) ions taken up were spontaneously reduced to elemental gold without addition of a specific reducing reagent and then colloidal gold particles were formed. The mechanisms for the uptake of Au(III) ions by aluminum hydroxide and for their spontaneous reduction are discussed. Copyright 2001 Academic Press.     

Sorption of small amounts of europium(III) on iron(III) hydroxide and oxide

The sorption of small amounts of europium(III) on iron(III) hydroxide and oxide has been studied as a function of pH. The mechanism of sorption is discussed. Optimum conditions have been found for the preconcentration of small or trace amounts of europium(III) by iron(III) hydroxide and oxide. The influence of complexing agents (EDTA, oxalate, tartrate and 5-sulfosalicylic acid) on the sorption of small amounts of europium(III) on iron(III) oxide has also been studied.     

Verdoheme reactivity. Remarkable paramagnetically shifted (1)H NMR spectra of intermediates from the addition of hydroxide or methoxide with Fe(II) and Fe(III) verdohemes

Studies of the reaction of 5-oxaporphyrin iron complexes (verdohemes) with methoxide ion or hydroxide ion have been undertaken to understand the initial step of ring opening of verdohemes. High-spin [ClFe(III)(OEOP)] undergoes a complex series of reactions upon treatment with hydroxide ion in chloroform, and similar species are also detected in dichloromethane, acetonitrile, and dimethyl sulfoxide. Three distinct paramagnetic intermediates have been identified by (1)H NMR spectroscopy. These reactive species are formed by addition of hydroxide to the macrocycle and to the iron as an axial ligand. Treatment of low-spin [(py)(2)Fe(II)(OEOP)]Cl (OEOP is the monoanion of octaethyl-5-oxaporphyrin) with excess methoxide ion in pyridine solution produces [(py)(n)()Fe(II)(OEBOMe)] (n = 1 or 2) ((OEBOMe), dianion of octaethylmethoxybiliverdin), whose (1)H NMR spectrum undergoes marked alteration upon addition of further amounts of methoxide ion. An identical (1)H NMR spectrum, which is characterized by methylene resonances with both upfield and downfield paramagnetic shifts, is formed upon treatment of [Fe(II)(OEBOMe)](2) with methoxide in pyridine solution and results from the formation of [(MeO)Fe(II)(OEBOMe)](-).     

Selective complex formation of saccharides with europium(III) and iron(III) ions at alkaline pH studied by ligand-exchange chromatography

At high pH, saccharides become negatively charged by deprotonation of one or several hydroxylic groups and they are highly and selectively retained by ligand-exchange chromatography. The systems consist of a sulphonated polystyrene strong cation exchanger in europium(III) or iron(III) form and sodium hydroxide as mobile phase. The degree of complex formation is dependent on solute character and concentration, metal ion and pH, the reaction being of second order as confirmed by breakthrough studies. Rapid desorption of the solutes is performed by the introduction of an acidic mobile phase. Monosaccharides, and especially sugar alcohols, are selectively retained by a column in Fe(III) form whereas all saccharides are strongly retained as Eu(III) complexes, e.g., the capacity factor for the breakthrough of 10 μM glucose, in 0.1 M NaOH as mobile phase, was ca. 3500 The systems are proposed to be highly selective for the analysis of sugars.     

The luminescence system of yttrium(III)-BPMPHD-CTMAB and the determination of yttrium(III)

The study indicated that yttrium(III) could form an ion association compound with a new synthetic reagent, 1,6-bi(1′-phenyl-3′-methyl-5′-pyrazolone-4′-)hexanedione (BPMPHD) and cetyl trimethyl ammonium bromide (CTMAB). The compound could enhance the natural fluorescence of BPMPHD by about 260 times, upon which a new fluorescence method was developed for determining yttrium in rare earth (RE) samples. The determination range was 9–900 ng/ml. The detection limit was 1.8 ng/ml. The composition of the ion association was [Y(BPMHD)₂]⁻CTMAB⁺.     

Sorption of chromium(VI) and chromium(III) on aluminium hydroxide

Factors that influence the sorption of Cr(VI) and Cr(III) on aluminium hydroxide were investigated. The sorption of chromates decreases as the pH of the suspension increases. The mechanism of CrO ₄ ^2– sorption was interpreted in terms of reactions between chromates and –OH and/or H₂O groups at the hydroxide/liquid interface. It has been shown that chromates are more tightly sorbed on aluminium hydroxide compared to other anions, e.g. chlorides. On the other hand, specifically absorbed anions, such as molybdates, compete strongly with chromates for the sorption sites. The sorption of chromium(III) increases with the pH of the suspension. Also, the sorption of chromium(III) is suppressed in the presence of citrate ions. The best conditions for the fixation of Cr(VI) and Cr(III) by aluminium hydroxide are presented.     

Investigation of the hydrolytic properties of U(VI) and Fe(III) in solutions

The present work deals with the investigation of U(VI) and Fe(III) state in the wide range of pH and metal-ion concentrations. A set of methods (ultrafiltration, adsorption on glass surface, migration in electric field, ion exchange, dialysis, spectrophotometry) were used to determine the region of mono- and polynuclear hydroxide complex formation.     

Ion association in solutions of dimethylthallium(III) hydroxide

From studies of the specific hydroxide ion catalyzed decomposition of diacetone alcohol by dimethylthallium(III) hydroxide at 25°C, it is concluded that both ion pairs (dissociation constantK=0.090 mole-dm^–3) and dimers (dimerization constantK _d=1.5 dm³-mole^–1) exist in aqueous solution.Request for reprints should be addressed to: Dr. A. D. Pethybridge, Department of Chemistry, The University, Whiteknights Park, Reading, Berkshire, England.Deceased October 16, 1972.     

Kinetics and mechanism of formation of penta-ammineglycinecobalt(III) ion from aquopenta-amminecobalt(III) ion and glycine in acid media

The rates of formation of penta-ammineglycinecobalt(III) ion from aquopenta-amminecobalt(III) ion and glycine in acidic media have been studied spectrophotometrically at different glycine concentration and different pH in the range of 50–70°C. The ΔH≠ and ΔSz≠ values are 27.6 kcal mole^?1 and +5.2 e. u. respectively, and increase in ionic strength causes only a slight acceleration of the rate. The results are consistent with a mechanism involving outer-sphere association between the aquopenta-amminecobalt(III) complex and glycine, followed by its transformation into the product by an essentially dissociative process in which rupture of the Co(III)? OH₂ bond is primarily important in the transition state (S_N1IP mechanism).     

Extraction behavior of Tm(III), Dy(III) and Sm(III) lanthanide with N-benzoyl-N-phenylhydroxalamine

The extraction of Sm(III), Dy(III) and Tm(III) with N-benzoyl-N-phenylhydroxalamine (BPHA) in benzene at pH range (1–10) has been studied. Quantitative separation was found in borate media at pH 8. The slope analysis showed that the extracted complex was M(BPHA)₃, where M=Sm(III), Dy(III) and Tm(III). The effect of various masking agents indicated that EDTA, oxalate, fluoride, phosphate and citrate, interfered in this study. Decontamination study showed that Cu(II), Zn(II), Ni(II), Co(II), Cr(III), Sc(III) and Fe(III) had very poor separation factors, whereas Sn(II), Cd(II), In(III), Ru(II), Hg(II), Ag(I), Ta(V) and Hf(IV) had very large separation factor. The effect of different diluents showed that carbontetrachloride, chloroform, benzene, toluene, nitrobenzene dichloromethane, MIBK and cyclohexanone were equally good for extraction except TBP due to ion association.     

Effect of Pyridyl Donors in the Chelation of Aluminum(III), Gallium(III), and Indium(III)

A new preparation of N,N'-bis(2-pyridylmethyl)ethylenediamine-N,N'-diacetic acid (H(2)bped) is reported, and its properties of complexation with Al(III), Ga(III), In(III), and Co(III) are investigated. The molecular structure of the cobalt(III) complex [Co(bped)]PF(6).CH(3)CN.H(2)O (C(20)H(25)CoF(6)N(5)O(5)P) has been solved by X-ray methods; the complex crystallizes in the triclinic space group P&onemacr;, with a = 10.611(2) ?, b = 12.720(2) ?, c = 9.868(1) ?, alpha = 102.70(1) degrees, beta =93.60(1) degrees, gamma = 106.96(1) degrees, and Z = 2. The structure was solved by direct methods and was refined by full-matrix least-squares procedures to R = 0.041 (R(w) = 0.038) for 4312 reflections with I > 3sigma(I). The Co(III) ion is coordinated in a distorted octahedral geometry with an N(4)O(2) donor atom set. The carboxylato oxygen atoms are coordinated trans, while the pyridyl nitrogen atoms are coordinated cis. The largest distortion from octahedral geometry is the N(pyridyl)-Co-N(pyridyl) angle of 107 degrees. Complex formation constants have been measured at 25 degrees C (&mgr; = 0.16 M (NaCl)). log K([M(bped)](+)) (log K([M(bped)(OH)])): M = Al, 10.85 (6.37); M = Ga, 19.89 (15.62); M = In, 22.6 (15.44). A protonated complex was also detected, [Ga(Hbped)](2+), log K = 21.79. The order of stability is In(III) > Ga(III) > Al(III) for the binary species, [M(bped)](+). The solution structures of the complexes have been probed in multinuclear NMR ((1)H, (13)C, (27)Al) studies, and these solution structures are compared with the solid state structure of the cobalt(III) complex. The complexes [In(bped)](+) and [In(bped)(OH)] are proposed to contain 7-coordinate In(III) with water and hydroxide completing the respective coordination spheres. The gallium complexes are proposed to be 6-coordinate: the [Ga(Hbped)](2+) complex contains a nondeprotonated carboxylic acid group which is not coordinated, and [Ga(bped)(OH)] contains a coordinated hydroxide which displaces a carboxylato donor. The [Al(bped)(OH)] complex may be 5-coordinate on the basis of its downfield (27)Al NMR chemical shift, 54 ppm.     

Interactions of Aluminum(III) with Phosphates

In order to obtain information about aluminum(III)-phosphate interactions, potentiometric measurements were carried out to characterize the complex forming properties of Al(III) with organic phosphates, phosphonates, and nucleoside-5'-monophosphates. The aluminum(III)-orthophosphate system is difficult to study due to AlPO(4) precipitation. To overcome this problem, the stability constant logarithms of the 1:1 Al(III) complexes of ligands with the same donor groups (log K(1:1)) were plotted against the basicities of the ligands (log K(PO)3(H)). The resulting linear free energy relation (LFER) indicates that organic phosphates, phosphonates, and uridine-, thymidine-, and guanosine 5'-monophosphates similarly bind Al(III). Adenosine and cytidine 5'-monophosphate fall above the LFER owing to the presence of a second microform with the nucleic base protonated and a hydroxide bound to the Al(III). From the LFER the log stability constant for Al(III) binding to HPO(4)(2-) is estimated as 6.13 +/- 0.05. From the weakness of any soluble orthophosphate complexes of Al(III) we confirm the importance of citrate as the main small molecule Al(3+) binder in the blood serum. The study includes investigation of Al(III) binding to di- and triphosphates, which bind metal ion differently than monophosphates. Structures of the complexes were supported by (31)P NMR measurements.     

Synthesis and characterization of the tetranuclear iron(III) complex of a new asymmetric multidentate ligand. A structural model for purple acid phosphatases

The ligand, 2-((2-hydroxy-5-methyl-3-((pyridin-2-ylmethylamino)methyl)benzyl)(2-hydroxybenzyl)amino)acetic acid (H(3)HPBA), which contains a donor atom set that mimics that of the active site of purple acid phosphatase is described. Reaction of H(3)HPBA with iron(III) or iron(II) salts results in formation of the tetranuclear complex, [Fe(4)(HPBA)(2)(OAc)(2)(mu-O)(mu-OH)(OH(2))(2)]ClO(4) x 5H(2)O. X-Ray structural analysis reveals the cation consists of four iron(III) ions, two HPBA(3-) ligands, two bridging acetate ligands, a bridging oxide ion and a bridging hydroxide ion. Each binucleating HPBA(3-) ligand coordinates two structurally distinct hexacoordinate iron(III) ions. The two metal ions coordinated to a HPBA(3-) ligand are linked to the two iron(III) metal ions of a second, similar binuclear unit by intramolecular oxide and hydroxide bridging moieties to form a tetramer. The complex has been further characterised by elemental analysis, mass spectrometry, UV-vis and MCD spectroscopy, X-ray crystallography, magnetic susceptibility measurements and variable-temperature M?ssbauer spectroscopy.     

Rhodium(III) catalyzed oxidation of cyclic ketones by alkaline hexacyanoferrate(III)

The kinetics of the oxidation of 2-methyl cyclohexanone and cycloheptanone with Fe(CN)₆ ³⁻ catalyzed by RhCl₃ in alkaline medium was investigated at four temperatures. The rate follows direct proportionality with respect to lower concentrations of hexacyanoferrate(III) ion, but tends to become zero order at higher concentrations of the oxidant, while the reaction shows first-order kinetics with respect to hydroxide ion and cyclic ketone concentrations. The rate shows a peculiar nature with respect to RhCl₃ concentrations in that it increases with increase in catalyst at low catalyst concentrations but after reaching a maximum, further increase in concentration retards the rate. An increase in the ionic strength of the medium increases the rate, while increase in the Fe(CN)₆ ⁴⁻ concentration decreases the rate.     

Determination of free acid in antimony(III) and bismuth(III) solutions

A method for the determination of free acid in antimony(III) and bismuth(III) solutions is given. A solution of the disodium salt of EDTA, 2-3 % in excess of the stoichiometric amount, is added to the metal salt solution and titrated with sodium hydroxide solution potentiometrically or visually using a mixed indicator. The error in the method is less than 0.5 %.     

Speciation of Cr(III) and Cr(VI) in environmental samples by using coprecipitation with praseodymium(III) hydroxide and determination by flame atomic absorption spectrometry

A speciation procedure has been established for the flame atomic absorption spectrometric determination of Cr(III) and Cr(VI) based on coprecipitation of Cr(III) by using praseodymium(III) hydroxide (Pr(OH)₃) precipitate. In the presented system, Cr(III) was quantitatively (>95%) recovered at the pH range of 10.0?C12.0 on Pr(III) hydroxide, while the recoveries of Cr(VI) were below 10%. The method was applied to the determination of the total chromium after reduction of Cr(VI) to Cr(III) by using hydroxylamine hydrochloride. The concentration of Cr(VI) is calculated by difference of total chromium and Cr(III) levels. The analytical parameters including pH of the aqueous medium, amount of Pr(III), centrifugation speed, sample volume were optimized. The influences of matrix ions were also investigated. The method was validated by the analysis of TMDA 70 fortified lake water certified reference material. The method was applied to the speciation of chromium in water samples.     

M(III)Dy(III)3 (M = Fe(III), Co(III)) complexes: three-blade propellers exhibiting slow relaxation of magnetization

[Dy(III)(HBpz(3))(2)](2+) moieties (HBpz(3)(-) = hydrotris(pyrazolyl)borate) and a 3d transition-metal ion (Fe(III) or Co(III)) have been rationally assembled using an dithiooxalato dianion ligand into 3d-4f [MDy(3)(HBpz(3))(6)(dto)(3)]·4CH(3)CN·2CH(2)Cl(2) (M = Fe (1), Co (2) complexes. Single-crystal X-ray studies reveal that three eight-coordinated Dy(III) centers in a square antiprismatic coordination environment are connecting to a central octahedral trivalent Fe or Co ion forming a propeller-type complex. The dynamics of the magnetization in the two isostructural compounds, modulated by the nature of the central M(III) metal ion, are remarkably different despite their analogous direct current (dc) magnetic properties. The slow relaxation of the magnetization observed for 2 mainly originates from isolated Dy ions, since a diamagnetic Co(III) metal ion links the magnetic Dy(III) ions. In the case of 1, the magnetic interaction between S = 1/2 Fe(III) ion and the three Dy(III) magnetic centers, although weak, generates a complex energy spectrum of magnetic states with low-lying excited states that induce a smaller energy gap than for 2 and thus a faster relaxation of the magnetization.     

Noncovalent binding of sensitizers for lanthanide(III) luminescence in an EDTA-bis(beta-cyclodextrin) ligand

EDTA-linked beta-cyclodextrin dimer 3 was synthesized from EDTA bis(anhydride) 1 and mono(propylamino)-appended beta-cyclodextrin 2. p-tert-butylbenzoate 5, bound by the beta-cyclodextrin cavities of 3 with an association constant of 10(4) M(-1) in water, acts as a sensitizer for the Eu(III) and Tb(III) complexes of 3. Luminescence spectroscopy, microcalorimetry, and Gd(III)-induced NMR relaxation rate measurements prove that 3 forms a 1:2 complex with 5 and that one of the beta-cyclodextrin-bound sensitizers coordinates to the EDTA-encapsulated Ln(III) ion. The Eu(III) complex of 3 forms strong 1:1 complexes (K approximately 10(7) M(-1)) with bis(propylamido adamantyl)-functionalized biphenyl sensitizers 7 and 8 in water. Both beta-cyclodextrins of 3 are involved in the binding of these guests. The amide functionality adjacent to the biphenyl unit in 7 and 8 coordinates to the EDTA-encapsulated Ln(III) ion. For these biphenyl-based antennae both binding to beta-cyclodextrin and coordination to the Ln(III) center are crucial for efficient sensitization.     

Visible and near-infrared intense luminescence from water-soluble lanthanide [Tb(III), Eu(III), Sm(III), Dy(III), Pr(III), Ho(III), Yb(III), Nd(III), Er(III)] complexes

The synthesis of a new ligand (1) containing a single phenanthroline (phen) chromophore and a flexibly connected diethylenetriamine tetracarboxylic acid unit (DTTA) as a lanthanide (Ln) coordination site is reported [1 is 4-[(9-methyl-1,10-phenantrol-2-yl)methyl]-1,4,7-triazaheptane-1,1,7,7-tetraacetic acid]. From 1, an extended series of water-soluble Ln.1 complexes was obtained, where Ln is Eu(III), Tb(III), Gd(III), Sm(III), Dy(III), Pr(III), Ho(III), Yb(III), Nd(III), and Er(III). The stoichiometry for the association was found 1:1, with an association constant K(A) > or = 10(7) s(-1) as determined by employing luminescence spectroscopy. The luminescence and photophysical properties of the series of lanthanide complexes were investigated in both H2O and D2O solutions. High efficiencies for the sensitized emission, phi(se), in air-equilibrated water were observed for the Ln.1 complexes of Eu(III) and Tb(III) in the visible region (phi(se) = 0.24 and 0.15, respectively) and of Sm(III), Dy(III), Pr(III), Ho(III), Yb(III), Nd(III), and Er(III) in the vis and/or near-infrared region [phi(se) = 2.5 x 10(-3), 5 x 10(-4), 3 x 10(-5), 2 x 10(-5), 2 x 10(-4), 4 x 10(-5), and (in D2O) 4 x 10(-5), respectively]. For Eu.1 and Tb.1, luminescence data for water and deuterated water allowed us to estimate that no solvent molecules (q) are bound to the ion centers (q = 0). Luminescence quenching by oxygen was investigated in selected cases.