Theoretical analysis of fluorine-passivated germanium surface for high-k/Ge gate stack by molecular orbital method

Energy state and coordination of fluorine (F)-passivated Ge surface have been theoretically analyzed by semi-empirical molecular orbital method in comparison with hydrogen-passivated Ge surface to predict usefulness of F for passivation element and surface stabilization. Heat of formation for the reaction of F atoms and Ge layer system decreased simultaneously without energy barrier. Resultantly, F-Ge bonds were formed on Ge layer system and Ge surface dangling bonds were passivated by F dissimilar to the reaction of H atoms and Ge layer system. Furthermore, it was confirmed experimentally that the electrical properties of HfO₂/Ge gate stack were improved by F₂-ambient treatment of Ge substrate prior to HfO₂ deposition. It is concluded that F-passivation of Ge surface is useful in making stable and low-defective Ge substrate for high-k dielectric layer deposition.     

Effects of N2 and NH3 remote plasma nitridation on the structural and electrical characteristics of the HfO2 gate dielectrics

The remote plasma nitridation (RPN) of an HfO₂ film using N₂ and NH₃ has been investigated comparatively. X-ray photoelectron spectroscopy and Auger electron spectroscopy analyses after post-deposition annealing (PDA) at 700 °C show that a large amount of nitrogen is present in the bulk film as well as in the interfacial layer for the HfO₂ film nitrided with NH₃-RPN. It is also shown that the interfacial layer formed during RPN and PDA is a nitrogen-rich Hf-silicate. The C-V characteristics of an HfO_xN_y gate dielectric nitrided with NH₃-RPN have a smaller equivalent oxide thickness than that nitrided with N₂-RPN in spite of its thicker interfacial layer.     

Effect of modification of S-terminated Ge(1 0 0) surface on ALD HfO2 gate stack

When S-termination on a Ge(1 0 0) surface was desorbed at an elevated temperature and an atomic layer deposition (ALD) HfO₂ film was deposited, interfacial thickness was less than 1 nm. As a result, the equivalent oxide thickness (EOT) of the stack on the initially S-terminated surface was thinner than that deposited on the O₃-oxidized surface, while HfO₂ film thickness was almost identical on both surfaces. Nevertheless, the HfO₂ stack on the initially S-terminated surface exhibited improved leakage current characteristics due to an increase in barrier height. Its thinner but robust interface will contribute to the scaling down of gate oxide integrity.     

Effect of chemical surface treatments on interfacial and electrical characteristics of atomic-layer-deposited Al2O3 films on Ge substrates

The Ge surfaces were cleaned and passivated by two kinds of chemical pretreatments: conventional combination of HF + (NH₄)₂S, and new one of HBr + (NH₄)₂S. The chemical states and stability at passivated Ge surfaces were carefully characterized. The influence of chemical surface treatments on the interface and electrical properties of Al₂O₃ gate dielectric films on Ge grown by atomic layer deposition (ALD) has been investigated deeply. It is found that the combination of HBr and (NH₄)₂S can remove more Ge-O bonds on the Ge surface compared to that of conventional HF and (NH₄)₂S with excellent stability. X-ray photoelectron spectroscopy (XPS) reveals that HBr and (NH₄)₂S treated Ge surface has a mixture states of GeO_x (9.25%) and GeS (7.40%) while HF and (NH₄)₂S treated Ge surface has a mixture states of GeO_x (16.45%) and GeS (3.37%). And the Ge-S peak from the surface of Ge substrates decreases a little after the HBr and (NH₄)₂S treated Ge surface was exposed in the ambient for 300 min, which suggests the Ge surface is stable to oxidants. The Al₂O₃ films on HBr and (NH₄)₂S treated Ge substrates exhibits better electrical properties such as large capacitance, decreased leakage current density by ∼two orders of magnitude, and less C-V hysteresis. This indicates that a reduction in charge traps possibly at the interface and more interface traps are terminated by sulfur. The surface treatment of HBr and (NH₄)₂S seems to be very promising in improving the quality of high-k gate stack on Ge substrates.     

Effect of surface preparation on the properties of Au/p-Cd1−xZnxTe

The effect of bromine methanol (BM) etching and NH₄F/H₂O₂ passivation on the Schottky barrier height between Au contact and semi-insulated (SI) p-Cd_1−xZn_xTe (x ≈ 0.09-0.18) was studied through current-voltage (I-V) and capacitance-voltage (C-V) measurements. Near-infrared (NIR) spectroscopy technique was utilized to determine the Zn concentration. X-ray photoelectron spectroscopy (XPS) for surface composition analysis showed that BM etched sample surface left a Te⁰-rich layer, however, which was oxidized to TeO₂ and the surface [Te]/([Cd] + [Zn]) ratio restored near-stoichiometry after NH₄F/H₂O₂ passivation. According to I-V measurement, barrier height was 0.80 ± 0.02-0.85 ± 0.02 eV for Au/p-Cd_1−xZn_xTe with BM etching, however, it increased to 0.89 ± 0.02-0.93 ± 0.02 eV with NH₄F/H₂O₂ passivation. Correspondingly, it was about 1.34 ± 0.02-1.43 ± 0.02 eV and 1.41 ± 0.02-1.51 ± 0.02 eV by C-V method.     

Optical and electrical properties of plasma-oxidation derived HfO2 gate dielectric films

High-k gate dielectric HfO₂ thin films have been deposited on Si(1 0 0) by using plasma oxidation of sputtered metallic Hf thin films. The optical and electrical properties in relation to postdeposition annealing temperatures are investigated by spectroscopic ellipsometry (SE) and capacitance-voltage (C-V) characteristics in detail. X-ray diffraction (XRD) measurement shows that the as-deposited HfO₂ films are basically amorphous. Based on a parameterized Tauc-Lorentz dispersion mode, excellent agreement has been found between the experimental and the simulated spectra, and the optical constants of the as-deposited and annealed films related to the annealing temperature are systematically extracted. Increases in the refractive index n and extinction coefficient k, with increasing annealing temperature are observed due to the formation of more closely packed thin films and the enhancement of scattering effect in the targeted HfO₂ film. Change of the complex dielectric function and reduction of optical band gap with an increase in annealing temperature are discussed. The extracted direct band gap related to the structure varies from 5.77, 5.65, and 5.56 eV for the as-deposited and annealed thin films at 700 and 800 °C, respectively. It has been found from the C-V measurement the decrease of accumulation capacitance values upon annealing, which can be contributed to the growth of the interfacial layer with lower dielectric constant upon postannealing. The flat-band voltage shifts negatively due to positive charge generated during postannealing.     

Low-temperature deposition of stoichiometric HfO2 on silicon: Analysis and quantification of the HfO2/Si interface from electrical and XPS measurements

An understanding of the exact structural makeup of dielectric interface is crucial for development of novel gate materials. In this paper a study of the HfO₂/Si interface created by the low-temperature deposition ultrathin stoichiometric HfO₂ on Si substrates by reactive sputtering is presented. Analysis, quantification and calculation of layer thickness of an HfO₂/Hf-Si-O_x/SiO₂ gate stack dielectrics have been performed, using X-ray photoelectron spectroscopy (XPS) depth profile method, angle resolved XPS and interface modeling by XPS data processing software. The results obtained were found to be in good agreement with the high frequency capacitance-voltage (C-V) measurements. The results suggest a development of a complex three layer dielectric stack, including hafnium dioxide layer, a narrow interface of hafnium silicate and broad region of oxygen diffusion into silicon wafer. The diffusion of oxygen was found particularly detrimental to the electrical properties of the stack, as this oxygen concentration gradient leads to the formation of suboxides of silicon with a lower permittivity, κ.     

Hf1−xSixOy dielectric films deposited by UV-photo-induced chemical vapour deposition (UV-CVD)

Hf_1−xSi_xO_y is an attractive candidate material for high-k dielectrics. We report in this work the deposition of ultra-thin Hf_1−xSi_xO_y films (0.1 ≤ x ≥ 0.6) on silicon substrate at 450 °C by UV-photo-induced chemical vapour deposition (UV-CVD) using 222 nm excimer lamps. Silicon(IV) and hafnium(IV) organic compounds were used as the precursors. Films from around 5 to 40 nm in thickness with refractive indices from 1.782 to 1.870 were grown. The deposition rate was found to be of 6 nm/min at a temperature of 450 °C. The physical, interfacial and electrical properties of hafnium silicate (Hf_1−xSi_xO_y) thin films were investigated by using X-ray photoelectron spectroscopy, ellipsometry, FT-IR, C-V and I-V measurements. XRD showed that they were basically amorphous, while Fourier transform infrared spectroscopy (FT-IR), clearly revealed Hf-O-Si absorption in the photo-CVD deposited Hf_1−xSi_xO_y films. Surface and interfacial properties were analysed by TEM and XPS. It is found that carbon content in the films deposited by UV-CVD is very low and it also decreases with increasing Si/(Si + Hf) ratio, as low as about 1 at.% at the Si/(Si + Hf) ratio of 60 at.%.     

Fabrication and characterization of La-doped HfO2 gate dielectrics by metal-organic chemical vapor deposition

La-doped HfO₂ gate dielectric thin films have been deposited on Si substrates using La(acac)₃ and Hf(acac)₄ (acac = 2,4-pentanedionate) mixing sources by low-pressure metal-organic chemical vapor deposition (MOCVD). The structure, thermal stability, and electrical properties of La-doped HfO₂ films have been investigated. Inductive coupled plasma analyses confirm that the La content ranging from 1 to 5 mol% is involved in the films. The films show smaller roughness of ∼0.5 nm and improved thermal stability up to 750 °C. The La-doped HfO₂ films on Pt-coated Si and fused quartz substrates have an intrinsic dielectric constant of ∼28 at 1 MHz and a band gap of 5.6 eV, respectively. X-ray photoelectron spectroscopy analyses reveal that the interfacial layer is Hf-based silicate. The reliable value of equivalent oxide thickness (EOT) around 1.2 nm has been obtained, but with a large leakage current density of 3 A/cm² at V_g = 1V + V_fb. MOCVD-derived La-doped HfO₂ is demonstrated to be a potential high-k gate dielectric film for next generation metal oxide semiconductor field effect transistor applications.     

The interface reaction of high-k La2Hf2O7/Si thin film grown by pulsed laser deposition

The La₂Hf₂O₇ films have been deposited on Si (1 0 0) substrate by using pulsed laser deposition (PLD) method. X-ray diffraction (XRD) demonstrates that the as-grown film is amorphous and crystallizes after 1000 °C annealing. The interface structure is systematically studied by Synchrotron X-ray reflectivity (XRR), Fourier transform infrared (FTIR) and X-ray photoelectron spectroscopy (XPS). Silicide, silicate and SiO_x formations from interfacial reaction are observed on the surface of the Si substrate in the as-grown film. The impact of silicide formation on the electrical properties is revealed by capacitance-voltage (C-V) measurements. By post-deposition annealing (PDA), silicide can be effectively eliminated and C-V property is obviously improved.     

Density functional theory study into the adsorption of CO2, H and CHx (x = 0-3) as well as C2H4 on α-Mo2C(0 0 0 1)

The structures and energetics of the chemisorbed CO₂, CH_x species and H as well as C₂H₄ on the α-Mo₂C(0 0 0 1) surface have been computed at the GGA-RPBE level of density functional theory. It is found that CO₂ adsorbs dissociately into CO and O, in agreement with the experimental finding. The adsorbed O, CH_x and H species prefer the site of three surface molybdenum atoms over a second layer carbon atom (V_C site). On the basis of the calculated adsorption energies of CH_x and H, the sequential dehydrogenation of CH₄ and the C/C coupling reaction of CH_x have been discussed.     

Microstructure and interfacial properties of HfO2-Al2O3 nanolaminate films

High-k HfO₂-Al₂O₃ composite gate dielectric thin films on Si(1 0 0) have been deposited by means of magnetron sputtering. The microstructure and interfacial characteristics of the HfO₂-Al₂O₃ films have been investigated by using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and spectroscopic ellipsometry (SE). Analysis by XRD has confirmed that an amorphous structure of the HfO₂-Al₂O₃ composite films is maintained up to an annealing temperature of 800 °C, which is much higher than that of pure HfO₂ thin films. FTIR characterization indicates that the growth of the interfacial SiO₂ layer is effectively suppressed when the annealing temperature is as low as 800 °C, which is also confirmed by spectroscopy ellipsometry measurement. These results clearly show that the crystallization temperature of the nanolaminate HfO₂-Al₂O₃ composite films has been increased compared to pure HfO₂ films. Al₂O₃ as a passivation barrier for HfO₂ high-k dielectrics prevents oxygen diffusion and the interfacial layer growth effectively.     

Metal carbide-induced negative flatband voltage shift in TaCx and HfCx/HfO2 gate stacks

We systematically investigated the role of the top interface for TaC_x and HfC_x/HfO₂ gate stacks on the effective work function (Φ_m,eff) shift by inserting a SiN layer at the gate/HfO₂ top interface or HfO₂/SiO₂ bottom interface. We found that Φ_m,eff of the TaN gate electrode on HfO₂ was larger than that on SiO₂ because of the HfO₂/SiO₂-bottom-interface dipole. On the other hand, we found that Φ_m,eff values of the TaC_x and HfC_x gate electrodes on HfO₂ agree with Φ_m,eff on SiO₂. This is because the potential offset of the opposite direction with respect to the bottom interface dipole appears at the metal carbide/HfO₂ interface. It is thus concluded that the top interface in the metal carbide/HfO₂ gate stacks causes the negative Φ_m,eff shift.     

Influence of Si/SiO2 interface properties on electrical performance and breakdown characteristics of ultrathin stacked oxide/nitride dielectric films

In this work, the influence of Si/SiO₂ interface properties, interface nitridation and remote-plasma-assisted oxidation (RPAO) thickness (<1 nm), on electrical performance and TDDB characteristics of sub-2 nm stacked oxide/nitride gate dielectrics has been investigated using a constant voltage stress (CVS). It is demonstrated that interfacial plasma nitridation improves the breakdown and electrical characteristics. In the case of PMOSFETs stressed in accumulation, interface nitridation suppresses the hole traps at the Si/SiO₂ interface evidenced by less negative V_t shifts. Interface nitridation also retards hole tunneling between the gate and drain, resulting in reduced off-state drain leakage. In addition, the RPAO thickness of stacked gate dielectrics shows a profound effect in device performance and TDDB reliability. Also, it is demonstrated that TDDB characteristics are improved for both PMOS and NMOS devices with the 0.6 nm-RPAO layer using Weibull analysis. The maximum operating voltage is projected to be improved by 0.3 V difference for a 10-year lifetime. However, physical breakdown mechanism and effective defect radius during stress appear to be independent of RPAO thickness from the observation of the Weibull slopes. A correlation between trap generation and dielectric thickness changes based on the C-V distortion and oxide thinning model is presented to clarify the trapping behavior in the RPAO and bulk nitride layer during CVS stress.     

Reduction of charge trapping in HfO2 film on a Ge substrate by trimethylaluminum pretreatment

Trimethylaluminum pretreatment prior to HfO₂ deposition is introduced for native oxide reduction. It is identified that the trimethylaluminum pretreatment could effectively reduce native oxide, which is transformed to an aluminum oxide interfacial layer. Formation of the thin aluminum oxide layer suppresses Ge diffusion into HfO₂, reducing hysteresis in the ca‐ pacitance–voltage curve. Moreover, the device reliability of the trimethylaluminum pretreated sample is improved in a constant current stress test. This work indicates that trimethylaluminum pretreatment is an effective in‐situ method for the gate dielectric stack formation to reduce charge trapping in the HfO₂ film on a Ge substrate. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

The effect of interface states, excess capacitance and series resistance in the Al/SiO2/p-Si Schottky diodes

The current-voltage (I-V) characteristics of Al/SiO₂/p-Si metal-insulator-semiconductor (MIS) Schottky diodes were measured at room temperature. In addition the capacitance-voltage (C-V) and conductance-voltage (G-V) measurements are studied at frequency range of 10 kHz-1 MHz. The higher value of ideality factor of 3.25 was attributed to the presence of an interfacial insulator layer between metal and semiconductor and the high density of interface states localized at Si/SiO₂ interface. The density of interface states (N_ss) distribution profile as a function of (E_ss − E_v) was extracted from the forward bias I-V measurements by taking into account the bias dependence of the effective barrier height (Φ_e) at room temperature for the Schottky diode on the order of ≅4 × 10¹³ eV⁻¹ cm⁻²_. These high values of N_ss were responsible for the non-ideal behaviour of I-V and C-V characteristics. Frequency dispersion in C-V and G-V can be interpreted only in terms of interface states. The N_ss can follow the ac signal especially at low frequencies and yield an excess capacitance. Experimental results show that the I-V, C-V and G-V characteristics of SD are affected not only in N_ss but also in series resistance (R_s), and the location of N_ss and R_s has a significant on electrical characteristics of Schottky diodes.     

Physical and electrical characteristics of a high-k Yb2O3 gate dielectric

High-k ytterbium oxide (Yb₂O₃) gate dielectrics were deposited on Si substrate by reactive sputtering. The structural features of these films after postdeposition annealing treatment were studied by X-ray diffraction and X-ray photoelectron spectroscopy. It is found that the Yb₂O₃ gate dielectrics annealed at 700 °C exhibit a larger capacitance value, a lower frequency dispersion and a smaller hysteresis voltage in C-V curves compared with other annealing temperatures. They also show negligible charge trapping under high constant voltage stress. This phenomenon is mainly attributed to the decrease in the amorphous silica thickness.     

Characterization of HfOxNy gate dielectrics using a hafnium oxide as target

Hafnium oxynitride (HfO_xN_y) gate dielectric has been deposited on Si (1 0 0) by means of radio frequency (rf) reactive sputtering using directly a HfO₂ target in N₂/Ar ambient. The thermal stability and microstructural characteristics for the HfO_xN_y films have been investigated. XPS results confirmed that nitrogen was successfully incorporated into the HfO₂ films. XRD analyses showed that the HfO_xN_y films remain amorphous after 800 °C annealing in N₂ ambient. Meanwhile the HfO_xN_y films can also effectively suppress oxygen diffusion during high temperature annealing and prevent interface layer from forming between HfO_xN_y films and Si substrates. AFM measurements demonstrated that surface roughness of the HfO_xN_y films increase slightly as compared to those pure HfO₂ films after post deposition annealing. By virtue of building reasonable model structure, the optical properties of the HfO_xN_y films have been discussed in detail.     

Evolution of SiGe nanoclusters and micro defects in the Si1−xGex layer fabricated by two-step ion implantation and subsequent thermal annealing

The Si_1−xGe_x thin layer is fabricated by two-step Ge ion implantation into (0 0 1) silicon. The embedded SiGe nanoclusters are produced in the Si_1−xGe_x layer upon further annealing. The number and size of the nanoclusters changed due to the Ge diffusion during annealing. Micro defects around the nanoclusters are illustrated. It is revealed that the change of Si-Si phonon mode is causing by the nanoclusters and micro defects.     

Subsurface localization of charge carriers in Si/SiO2/Si x Ge1 − x nanostructures

Analysis of the capacitance-voltage (C-V) characteristics reveals an elevated concentration of charge carriers under the surface of a silicon substrate due to the formation of elastically stressed regions induced in the substrate by Si _x Ge_{1 ? x} nanoislands grown on the preliminarily oxidized Si surface. The C-V characteristics exhibit charge density peaks at a depth from 700 to 1000 nm for Si/SiO₂/Si _x Ge_{1 ? x} structures with various thicknesses of the SiO₂ layer. The results of theoretical calculations of the electron density distribution in the bulk of the silicon substrate correspond on the whole to the C-V characteristics. The state of the interfaces in the structures with different thicknesses of the oxide layer, which determines the effects of surface and interfacial recombination as well as charge carrier scattering, is studied by analyzing the kinetics of decay of a photo-emf signal and the photo-emf distribution over the surface of the structure. The results can be used in the development of various devices based on SiGe with inclusions of oxide layers.