A comparative kinetic study for the oxidation of 2‐mercaptoethanol by di‐μ‐oxo‐bis(1,4,7,10‐tetraazacyclododecane)‐dimanganese(III,IV) and di‐μ‐oxo‐bis(1,4,8,11‐tetraazacyclotetradecane)‐dimanganese(III,IV) complexes: Influence of copper(II)

A comparative kinetic study of the reactions of two mixed valence manganese(III,IV) complexes with macrocyclic ligands, [L¹Mn^IV(O)₂Mn^IIIL¹], 1 (L¹ = 1,4,7,10‐tetraazacyclododecane) and [L²Mn^IV(O)₂Mn^IIIL²], 2 (L² = 1,4,8,11‐tetraazacyclotetradecane) with 2‐mercaptoethanol (RSH) has been carried out by spectrophotometry in aqueous buffer at (30 ± 0.1)°C. Rate of the reactions between the oxidants and the reductant was found to be negligibly slow with no systematic dependence on either redox partners. Externally added copper(II) (usually 5 × 10^?7 mol dm^?3), however, increases the rate of the reduction of 1 and 2 significantly. In the presence of catalytic amount of copper(II), the rate of the reaction is nearly proportional to [RSH] at lower concentration of the reductant but follows a saturation kinetics at higher concentration of the latter for the reaction between 1 and the thiol. Reaction rate was found to be strongly influenced by the variation of acidity of the medium and the observed kinetics suggests that the two reductant species ([Cu(RSH)]²⁺ and [Cu(RS)]⁺) are significant for the reaction between 1 and the thiol. The dependence of the rate on [RSH] for the reduction of 2 by the thiol was complex and rationalized considering two equilibria involving the catalyst (Cu²⁺) and the reductant. The pH rate profile suggests that both the μ‐O protonated [Mn^III(O)(OH)Mn^IV] and the deprotonated [Mn^III(O)₂Mn^IV] forms of the oxidant 2 become important. The kinetic results presented in this study indicate the domination of outer‐sphere path. © 2003 Wiley Periodicals, Inc. Int J Chem Kinet 36: 129–137, 2004     

A Redox‐Active 2D Metal–Organic Framework for Efficient Lithium Storage with Extraordinary High Capacity

Metal–organic framework cathodes usually exhibit low capacity and poor electrochemical performance for Li‐ion storage owing to intrinsic low conductivity and inferior redox activity. Now a redox‐active 2D copper–benzoquinoid (Cu‐THQ) MOF has been synthesized by a simple solvothermal method. The abundant porosity and intrinsic redox character endow the 2D Cu‐THQ MOF with promising electrochemical activity. Superior performance is achieved as a Li‐ion battery cathode with a high reversible capacity (387 mA h g^?1), large specific energy density (775 Wh kg^?1), and good cycling stability. The reaction mechanism is unveiled by comprehensive spectroscopic techniques: a three‐electron redox reaction per coordination unit and one‐electron redox reaction per copper ion mechanism is demonstrated. This elucidatory understanding sheds new light on future rational design of high‐performance MOF‐based cathode materials for efficient energy storage and conversion.     

Conjugated Copper–Catecholate Framework Electrodes for Efficient Energy Storage

A conjugated copper(II) catecholate based metal–organic framework (namely Cu‐DBC) was prepared using a D₂‐symmetric redox‐active ligand in a copper bis(dihydroxy) coordination geometry. The π‐d conjugated framework exhibits typical semiconducting behavior with a high electrical conductivity of ca. 1.0 S m^?1 at room temperature. Benefiting from the good electrical conductivity and the excellent redox reversibility of both ligand and copper centers, Cu‐DBC electrode features superior capacitor performances with gravimetric capacitance up to 479 F g^?1 at a discharge rate of 0.2 A g^?1. Moreover, the symmetric solid‐state supercapacitor of Cu‐DBC exhibits high areal (879 mF cm^?2) and volumetric (22 F cm^?3) capacitances, as well as good rate capability. These metrics are superior to most reported MOF‐based supercapacitors, demonstrating promising applications in energy‐storage devices.     

Crystal structure,characterization and catalytic activities of Cu(II) coordination complexes with 8‐hydroxyquinoline and pyrazine‐2‐carboxylic acid

Green and blue crystals of the coordination complexes [Cu(8‐hquin)₂(H₂O)₂], 1 and [Cu(pyzca)₂(H₂O)₂], 2 were obtained by the reaction of copper chloride with 8‐hydroxyquinoline (8‐hquinH) or pyrazine‐2‐carboxylic acid (pyzcaH) as ligands. The structures of 1 and 2 were characterized by elemental analyses, electronic absorption, Infrared (IR) and thermal studies. The luminescent behavior complexes 1 and 2 was also discussed. The coordination environment of copper(II) center displays distorted octahedral coordination geometry. The structure of the complexes 1 and 2 is constructed by an infinite number of discrete mononuclear molecules extending along the a‐axis to form a 1D‐chain via H‐bonds. The extensive hydrogen bonds and short contacts develop the structures of 1 and 2 to 3D‐network. The catalytic behavior of the complexes 1 and 2 was utilized for degradation of methylene blue dye (MB). The kinetic data indicated that the complexes 1 and 2 are effective catalysts for degradation of MB dye. Photoluminescence probing technology was used as a sensitive probe for detecting ^?OH radicals.     

Copper(II) Halide Complexes with 1‐tert‐Butyl‐1H‐1,2,4‐triazole and 1‐tert‐Butyl‐1H‐tetrazole

1‐tert‐Butyl‐1H‐1,2,4‐triazole (tbtr) was found to react with copper(II) chloride or bromide to give the complexes [Cu(tbtr)₂X₂]_n and [Cu(tbtr)₄X₂] (X = Cl, Br). 1‐tert‐Butyl‐1H‐tetrazole (tbtt) reacts with copper(II) bromide resulting in the formation of the complex [Cu₃(tbtt)₆Br₆]. The obtained crystalline complexes as well as free ligand tbtr were characterized by elemental analysis, IR spectroscopy, thermal and X‐ray analyses. For free ligand tbtr, ¹H NMR and ¹³C NMR spectra were also recorded. In all the complexes, tbtr and tbtt act as monodentate ligands coordinated by Cu^II cations via the heteroring N⁴ atoms. The triazole complexes [Cu(tbtr)₂Cl₂]_n and [Cu(tbtr)₂Br₂]_n are isotypic, being 1D coordination polymers, formed at the expense of single halide bridges between neighboring copper(II) cations. The isotypic complexes [Cu(tbtr)₄Cl₂] and [Cu(tbtr)₄Br₂] reveal mononuclear centrosymmetric structure, with octahedral coordination of Cu^II cations. The tetrazole compound [Cu₃(tbtt)₆Br₆] is a linear trinuclear complex, in which neighboring copper(II) cations are linked by single bromide bridges.     

(1‐Butyl‐4‐methyl‐pyridinium)[Cu(SCN)2]: A Coordination Polymer and Ionic Liquid

The compound (C₄C₁py)[Cu(SCN)₂], (C₄C₁py=1‐Butyl‐4‐methyl‐pyridinium), which can be obtained from CuSCN and the ionic liquid (C₄C₁py)(SCN), turns out to be a new organic–inorganic hybrid material as it qualifies both, as a coordination polymer and an ionic liquid. It features linked [Cu(SCN)₂]^? units, in which the thiocyanates bridge the copper ions in a μ_1,3‐fashion. The resulting one‐dimensional chains run along the a axis, separated by the C₄C₁py counterions. Powder X‐ray diffraction not only confirms the single‐crystal X‐ray structure solution but proves the reformation of the coordination polymer from an isotropic melt. However, the materials shows a complex thermal behavior often encountered for ionic liquids such as a strong tendency to form a supercooled melt. At a relatively high cooling rate, glass formation is observed. When heating this melt in differential scanning calorimetry (DSC) and temperature‐dependent polarizing optical microscopy (POM), investigations reveal the existence of a less thermodynamically stable crystalline polymorph. Raman measurements conducted at 10 and 100 °C point towards the formation of polyanionic chain fragments in the melt. Solid‐state UV/Vis spectroscopy shows a broad absorption band around 18 870 cm^?1 (530 nm) and another strong one below 20 000 cm^?1 (<500 nm). The latter is attributed to the d(Cu^I)→π*(SCN)‐MLCT (metal‐to‐ligand charge transfer) transition within the coordination polymer yielding an energy gap of 2.4 eV. At room temperature and upon irradiation with UV light, the material shows a weak fluorescence band at 15 870 cm^?1 (630 nm) with a quantum efficiency of 0.90(2) % and a lifetime of 131(2) ns. Upon lowering the temperature, the luminescence intensity strongly increases. Simultaneously, the band around 450 nm in the excitation spectrum decreases.     

Remarkable solvent effects in the hydro‐ and solvothermal synthesis of copper‐1,10‐phenanthroline complexes

Compound {[Cu(II)/Cu(I)]₂(ophen)₄(Htpt)}^?2H₂O ( 1 ) was obtained by hydrothermal reaction. Compound 1 is a mixed‐valence copper coordination complex with a different coordination environment. The X‐ray structural analysis of 1 revealed two crystallographically independent dimeric [Cu₂(ophen)₂]⁺ units bridged by two µ₁‐carboxylate groups of the tpt ligand into a butterfly‐shaped molecule in the crystal structure. Compound [Cu(I)₃(CN)₃(phen)₃] ( 2 ) was synthesized using ethanol instead of water, and consisted of an infinite helix chain formed from [Cu(I)(phen)]⁺ units bridged by cyano groups. Copyright © 2007 John Wiley & Sons, Ltd.     

Copper(II) Complexes of ω‐Hydroxy‐Functionalized N‐Salicylidenehydrazides show pH‐Controlled Switching between Dicationic Dimers and Neutral One‐Dimensional Coordination Polymers

New copper(II) complexes of the hydrazone ligands H₂salhyhb, H₂salhyhp, and H₂salhyhh, derived from salicylaldehyde and ω‐hydroxy carbonic acid hydrazides, have been synthesized and physically characterized. Two fundamental structures were found in solid state depending on the pH‐value of the reaction solution. Acidic conditions lead to the formation of the di‐μ‐phenoxo‐bridged dicationic complex dimers [{Cu(Hsalhyhb)}₂]²⁺ ( 1a ), [{Cu(Hsalhyhp)}₂]²⁺ ( 2a ), and [{Cu(Hsalhyhh)}₂]²⁺ ( 3a ), isolated as perchlorate salts. The dimeric complexes show strong antiferromagnetic coupling with J = ?399 ( 1a ), ?410 ( 2a ), and ?311 cm^?1 ( 3a ). Higher pH‐values resulted in the aggregation of neutral copper ligand fragments to the one‐dimensional coordination polymers [{Cu(salhyhb)}_n] ( 1b ), [{Cu(salhyhp)}_n] ( 2b ), and [{Cu(salhyhh)}_n] ( 3b ). 3b has been examined by means of X‐ray crystallography and represents the first example of a structurally characterized neutral copper(II) N‐salicylidenehydrazide complex without additional ligands. The magnetic interactions in the polymers are also antiferromagnetic with J = ?125 ( 1b ), ?136 ( 2b ), and ?148 cm^?1 ( 3b ), but strongly reduced compared to the corresponding dimeric complexes. The two basic structure types can be reversibly interconverted simply by pH‐control.     

Isolation of the Copper Redox Steps in the Standard Selective Catalytic Reduction on Cu‐SSZ‐13

Operando X‐ray absorption experiments and density functional theory (DFT) calculations are reported that elucidate the role of copper redox chemistry in the selective catalytic reduction (SCR) of NO over Cu‐exchanged SSZ‐13. Catalysts prepared to contain only isolated, exchanged Cu^II ions evidence both Cu^II and Cu^I ions under standard SCR conditions at 473 K. Reactant cutoff experiments show that NO and NH₃ together are necessary for Cu^II reduction to Cu^I. DFT calculations show that NO‐assisted NH₃ dissociation is both energetically favorable and accounts for the observed Cu^II reduction. The calculations predict in situ generation of Brønsted sites proximal to Cu^I upon reduction, which we quantify in separate titration experiments. Both NO and O₂ are necessary for oxidation of Cu^I to Cu^II, which DFT suggests to occur by a NO₂ intermediate. Reaction of Cu‐bound NO₂ with proximal NH₄⁺ completes the catalytic cycle. N₂ is produced in both reduction and oxidation half‐cycles.     

Synthetic and Structural Studies on Copper 1 H‐[1,10]‐Phenanthrolin‐2‐one Coordination Complexes: Isolation of a Novel Intermediate During 1,10‐Phenanthroline Hydroxylation

The synthesis and crystal structure elucidation of a novel dinuclear heteroleptic copper(II) complex has led to an alternative mechanism in the formation of covalent hydrates. During further studies on the synthesis and properties of [Cu₂(ophen)₂] ( 1 ), a dinuclear complex of copper(I) with 1 H‐[1,10]‐phenanthrolin‐2‐one (Hophen), two intermediates/alternative products 2 and 3 were isolated. The dinuclear, antiferromagnetic complex [Cu₂(ophen)₂(phen)₂] ? (NO₃)₂ ? 9H₂O ( 3 , phen=1,10‐phenanthroline) contains two five‐coordinate copper(II) ions, both with trigonal‐bipyramidal coordination, which are bridged together through deprotonated hydroxyl groups with a Cu? Cu non‐bonding distance of 3.100 Å. Complex [Cu(phen)₂(H₂O)] ? (NO₃)₂ ( 2 ) is a polymorph of a previously reported material. The occurrence of 2 and 3 has led us to propose a variation to the Gillard mechanism for the formation of covalent hydrates in bidentate N‐heterocycles in which the attacking nucleophile may be the deprotonated form of 2 , [Cu(phen)₂(OH)]^?, rather than free OH^?.     

Plant‐supported silver nanoparticles: Efficient,economically viable and easily recoverable catalyst for the reduction of organic pollutants

Ginger rhizome powder was used for the synthesis of supported metallic nanoparticle catalysts. A simple and novel adsorption method was used for the synthesis of silver nanoparticles loaded on ginger powder (Ag/GP), copper on ginger powder (Cu/GP) and nickel on ginger powder (Ni/GP). Among these, Ag/GP showed selective reduction of methyl orange and was used for further reactions. The prepared nanomaterials were characterized through X‐ray diffraction, transmission electron microscopy, field emission scanning electron microscopy, fourier transform infrared spectroscopy and energy‐dispersive X‐ray spectroscopy. The prepared Ag/GP catalyst was employed in the catalytic reduction of 4‐nitrophenol (4‐NP), 2‐nitrophenol (2‐NP), rhodamine B, methyl red and congo red. Ag/GP showed excellent catalytic reduction activity, the rate constants being 1.26 × 10^?3 and 2.38 × 10^?3 s^?1 for 2‐NP and 4‐NP, respectively. The turnover frequency reached 1.06 min^?1 for 2‐NP and 1.16 min^?1 for 4‐NP when using the Ag/GP catalyst. The prepared Ag/GP catalyst demonstrated outstanding activity for the degradation of a mixed solution of dyes. Also, stability and reusability of the prepared catalyst were investigated, which showed outstanding reusability up to five times and was stable up to five days.     

Copper‐Containing SiCN Precursor Ceramics (Cu@SiCN) as Selective Hydrocarbon Oxidation Catalysts Using Air as an Oxidant

A molecular approach to metal‐containing ceramics and their application as selective heterogeneous oxidation catalysts is presented. The aminopyridinato copper complex [Cu₂(Ap^TMS)₂] (Ap^TMSH=(4‐methylpyridin‐2‐yl)trimethylsilanylamine) reacts with poly(organosilazanes) via aminopyridine elimination, as shown for the commercially available ceramic precursor HTT 1800. The reaction was studied by ¹H and ¹³C NMR spectroscopy. The liberation of the free, protonated ligand Ap^TMSH is indicative of the copper polycarbosilazane binding. Crosslinking of the copper‐modified poly(organosilazane) and subsequent pyrolysis lead to the copper‐containing ceramics. The copper is reduced to copper metal during the pyrolysis step up to 1000 °C, as observed by solid‐state ⁶⁵Cu NMR spectroscopy, SEM images, and energy‐dispersive spectroscopy (EDS). Powder diffraction experiments verified the presence of crystalline copper. All Cu@SiCN ceramics show catalytic activity towards the oxidation of cycloalkanes using air as oxidant. The selectivity of the reaction increases with increasing copper content. The catalysts are recyclable. This study proves the feasibility of this molecular approach to metal‐containing SiCN precursor ceramics by using silylaminopyridinato complexes. Furthermore, the catalytic results confirm the applicability of this new class of metal‐containing ceramics as catalysts.     

Thiol‐disulfide redox equilibria of glutathione metaboloma compounds investigated by tandem mass spectrometry

The thiol group of cysteine plays a pivotal role in structural and functional biology. We use mass spectrometry to study glutathione‐related homo‐ and heterodimeric disulfides, aiming at understanding the factors affecting the redox potentials of different disulfide/thiol pairs. Several electrospray ionization (ESI)‐protonated disulfides of cysteamine, cysteine, penicillamine, N‐acetylcysteine, N‐acetylpenicillamine, γGluCySH, HSCyGly, and glutathione were analyzed on a triple quadrupole instrument to measure their energy‐resolved tandem mass spectra. Fission of the disulfide bond yields RSH*H⁺ and RS⁺ ions. The logarithm of the intensity ratio of the RS⁺/RSH*H⁺ fragments in homodimeric disulfides is proportional to the normal reduction potential of their RSSR/RSH pairs determined by nuclear magnetic resonance (NMR) in solution, the more reducing ones yielding the higher ratios. Also in some R₁S‐SR₂ disulfides, the ratio of the intensities of the RSH + H⁺ and RS⁺ ions of each participating thiol shows a linear relationship with the Nernst equation potential difference of the corresponding redox pairs. This behavior allows us to measure the redox potentials of some disulfide/thiol pairs by using different thiol‐reducing probes of known oxidoreductive potential as reference. To assist understanding of the fission mechanism of the disulfide bond, the fragments tentatively identified as ‘sulfenium’ were themselves fragmented; accurate mass measurement of the resulting second‐generation fragments demonstrated a loss of thioformaldehyde, thus supporting the assigned structure of this elusive intermediate of the oxidative stress pathway. Understanding this fragmentation process allows us to employ this technique with larger molecules to measure by mass spectrometry the micro‐redox properties of different disulfide bonds in peptides with catalytic and signaling biological activity. Copyright © 2008 John Wiley & Sons, Ltd.     

Highly Selective and Sensitive Copper(II) Membrane Sensors Based on 6‐Methyl‐4‐(1‐phenylmethylidene)amino‐3‐thioxo‐1,2,4‐triazin‐5‐one as a New Neutral Ionophore

A new Cu(II) ion‐selective PVC membrane sensor based on 6‐methyl‐4‐(1‐phenylmethylidene)amino‐3‐thioxo‐1,2,4‐triazin‐5‐one (MATTO) as an excellent sensing material was developed. The electrode exhibits a Nernstian slope of 29.2±0.4 mV per decade over a very wide concentration range between 1.0×10^?1 and 1.0×10^?6 M, with a detection limit of 4.8×10^?7 M (30.5 ng/mL). The sensor possesses the advantages of short conditioning time, fast response time (<10 s), and especially, very good selectivity towards transition and heavy metal, and some mono, di and trivalent cations. The proposed electrode was successfully applied to the determination of copper in wastewater of copper electroplating samples and as an indicator electrode in potentiometric titration of Cu(II) ions with EDTA.     

Synthesis,Characterization, DNA‐binding Properties,and ­Antioxidant Activity of a Copper(II) Complex with 1, 3‐Bis­(1‐allaylbenzimidazol‐2‐yl)‐2‐oxopropane

A new complex of copper(II) picrate (pic) with 1, 3‐bis(1‐allaylbenzimidazol‐2‐yl)‐2‐oxopropane (aobb), with the composition [Cu(aobb)₂](pic)₂, was synthesized and characterized. The crystal structure of the copper(II) complex revealed that the coordination environment around the central copper(II) atom is a distorted octahedral arrangement. Electronic absorption spectroscopy, ethidium bromide displacement experiments and viscosity measurements indicate that the ligand and the Cu^II complex can strongly bind to calf thymus DNA, presumably by an intercalation mechanism. Furthermore, the antioxidant activity of the Cu^II complex was determined by superoxide and hydroxyl radical scavenging method in vitro, which indicate that the Cu^II complex has the activity to suppress OH ^· and O₂ ^{· –}.     

A Water‐Soluble Copper–Polypyridine Complex as a Homogeneous Catalyst for both Photo‐Induced and Electrocatalytic O2 Evolution

The water‐soluble polypyridine copper complex [Cu(F₃TPA)(ClO₄)₂] [ 1 ; F₃TPA=tris(2‐fluoro‐6‐pyridylmethyl)amine] catalyzes water oxidation in a pH 8.5 borate buffer at a relatively low overpotential of 610 mV. Assisted by photosensitizer and an electron acceptor, 1 also exhibits activity as a homogeneous catalyst for photo‐induced O₂ evolution with a maximum turnover frequency (TOF) of (1.58±0.03)×10^?1 s^?1 and a maximum turnover number (TON) of 11.61±0.23. In comparison, the reference [Cu(TPA)(ClO₄)₂] [TPA=tris(2‐pyridylmethyl)amine] displayed almost no activity under either set of conditions, implying the crucial role of the ligand in determining the behavior of the catalyst. Experimental evidence indicate the molecular catalytic nature of 1 , leading to a potentially practical strategy to apply the copper complex in a photoelectrochemical device for water oxidation.     

Kupferkomplexe des neuen Chelatliganden 1‐Methyl‐2‐(2‐thiophenolato)‐1H‐benzimidazol (mtpb) und dessen Oxidationsprodukten

Copper Complexes of the New Chelate Ligand 1‐Methyl‐2‐(2‐thiophenolato)‐1H‐benzimidazole (mtpb) and of its Oxidation Products Anodic electrolysis of copper in acetonitrile in the presence of Hmtpb leads to formation of yellow [Cu₄(mtbp)₄] which was crystallized as a dichloromethane solvate with two crystallographically independent cluster molecules in the unit cell. The copper(I) atoms exhibit slightly pyramidal S₂N coordination with bridging thiolate sulfur atoms. The two clusters contain the four copper atoms arranged in a more (Cu1‐Cu4) or less (Cu5‐Cu8) distorted bisphenoidal arrangement. Reaction of mtpb^— with Cu(ClO₄)₂ under anoxic conditions also produces [Cu₄(mtpb)₄]. However, the admittance of O₂ in the reaction of mtpb^— with copper(II) acetate in methanol causes oxidation of the sulfur atoms; a square‐pyramidal configurated copper(II) complex [Cu(CH₃CO₂‐κ²O)(L₁‐κN)(L₂‐κN, O)] has been isolated and crystallographically characterized in which L₁ is the neutral sulfinic methyl ester and L₂^— is the sulfonate derived from mtpb^—.     

Structural Basis for Copper–Oxygen Mediated C−H Bond Activation by the Formylglycine‐Generating Enzyme

The formylglycine‐generating enzyme (FGE) is a unique copper protein that catalyzes oxygen‐dependent C−H activation. We describe 1.66 Å‐ and 1.28 Å‐resolution crystal structures of FGE from Thermomonospora curvata in complex with either Ag^I or Cd^II providing definitive evidence for a high‐affinity metal‐binding site in this enzyme. The structures reveal a bis‐cysteine linear coordination of the monovalent metal, and tetrahedral coordination of the bivalent metal. Similar coordination changes may occur in the active enzyme as a result of Cu^I/II redox cycling. Complexation of copper atoms by two cysteine residues is common among copper‐trafficking proteins, but is unprecedented for redox‐active copper enzymes or synthetic copper catalysts.     

Synthesis and characterization of copper(II) dithiocarbamate complexes involving pyrrole and ferrocenyl moieties and their utility for sensing anions and preparation of copper sulfide and copper–iron sulfide nanoparticles

Bis(N‐(pyrrol‐2‐ylmethyl)‐N‐butyldithiocarbamato‐S,S′)copper(II) ( 1 ), bis(N‐(pyrrol‐2‐ylmethyl)‐N‐(2‐phenylethyl)dithiocarbamato‐S,S′)copper(II) ( 2 ), bis(N‐methylferrocenyl‐N‐(2‐phenylethyl)dithiocarbamato‐S,S′)copper(II) ( 3 ) and bis(N‐furfuryl‐N‐methylferrocenyldithiocarbamato‐S,S′)copper(II) ( 4 ) were prepared and characterized using elemental analysis and infrared and UV–visible spectroscopies. X‐ray diffraction (XRD) studies on 3 show that each copper centre adopts the square planar geometry by the coordination of four sulfur atoms of the metalloligand N‐methylferrocenyl‐N‐(2‐phenylethyl)dithiocarbamate. The Cu? S distances are symmetrical and are in the range 2.293–2.305 Å. The supramolecular architecture in complex 3 is sustained in the solid state by C? H???π, C? H???S, Fe???Fe and H???H interactions. Density functional theory calculations were carried out for 3 . Anion (F^?, Cl^?, Br^? and I^?) binding studies with complex 1 were performed using cyclic voltammetry. Copper sulfide, copper–iron sulfide‐ 1 and copper–iron sulfide‐ 2 nanoparticles were prepared from complexes 2 , 3 and 4 , respectively, and they were characterized using powder XRD, transmission electron microscopy (TEM) and energy‐dispersive X‐ray, UV–visible, photoluminescence and infrared spectroscopies. TEM images of copper–iron sulfide‐ 1 and copper–iron sulfide‐ 2 reveal that the particles are spherical and oval shaped, respectively. Photocatalytic activities of as‐prepared nanoparticles were studied by decolourization of methylene blue and rhodamine‐B under UV light. It was found that copper–iron sulfide degrades methylene blue and rhodamine‐B much better than does copper sulfide.