Transition states for deactivation reactions in the modeled 2,2,6,6‐tetramethyl‐1‐piperidinyloxy‐mediated free‐radical polymerization of acrylonitrile

The geometries and energetics of transition states (TS) for radical deactivation reactions, including competitive combination and disproportionation reactions, have been studied for the modeled 2,2,6,6‐tetramethyl‐1‐piperidinyloxy (TEMPO)‐mediated free‐radical polymerization of acrylonitrile with quantum mechanical calculations at the DFT/UB3‐LYP/6‐311+G(3df,2p)//(U)AM1 level of theory (where DFT is density functional theory, AM1 is Austin model 1, and UAM1 is unrestricted Austin model 1). A method providing reasonable starting geometries for an effective search for TS between the TEMPO radical and 1‐cyanopropyl radical mimicking the growing polyacrylonitrile macroradical is shown. For the hydrogen atom abstraction reaction by the TEMPO radical from the 1‐cyanopropyl radical, practically one TS has been found, whereas for the combination reaction of the radicals, several TS have been found, mainly differing in out‐of‐plane angle α of the N? O bond in the TEMPO structure. α in the TS is correlated with the activation energy, ΔE, determined from the single‐point calculation at the DFT UB3‐LYP/6‐311+G(3df, 2p)//UAM1 level for the combination reaction of CH₃AN· with the TEMPO radical. The theoretical activation energy for the coupling reaction from DFT UB3‐LYP/6‐311+G(3df, 2p)//UAM1 calculations has been estimated to be 11.6 kcal mol^?1, that is, only about 4.5 times smaller than ΔE for the disproportionation reaction obtained with the DFT UB3‐LYP/6‐311+G(3df, 2p)//(U)AM1 approach. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 914–927, 2006     

Incubation period in the 2,2,4,4‐tetramethyl‐1‐piperidinyloxy‐mediated thermal autopolymerization of styrene: Kinetics and simulations

Mechanisms and simulations of the induction period and the initial polymerization stages in the nitroxide‐mediated autopolymerization of styrene are discussed. At 120–125 °C and moderate 2,2,4,4‐tetramethyl‐1‐piperidinyloxy (TEMPO) concentrations (0.02–0.08 M), the main source of radicals is the hydrogen abstraction of the Mayo dimer by TEMPO [with the kinetic constant of hydrogen abstraction (k_h)]. At higher TEMPO concentrations ([N?] > 0.1 M), this reaction is still dominant, but radical generation by the direct attack against styrene by TEMPO, with kinetic constant of addition k_ad, also becomes relevant. From previous experimental data and simulations, initial estimates of k_h ≈ 1 and k_ad ≈ 6 × 10^?7 L mol^?1 s^?1 are obtained at 125 °C. From the induction period to the polymerization regime, there is an abrupt change in the dominant mechanism generating radicals because of the sudden decrease in the nitroxide radicals. Under induction‐period conditions, the simulations confirm the validity of the quasi‐steady‐state assumption (QSSA) for the Mayo dimer in this regime; however, after the induction period, the QSSA for the dimer is not valid, and this brings into question the scientific basis of the well‐known expression k_th[M]³ (where [M] is the monomer concentration and k_th is the kinetic constant of autoinitiation) for the autoinitiation rate in styrene polymerization. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6962‐6979, 2006     

Decomposition of model alkoxyamines in simple and polymerizing systems. I. 2,2,6,6‐tetramethylpiperidinyl‐ N‐oxyl‐based compounds

The thermal decomposition of five alkoxyamines labeled TEMPO–R, where TEMPO was 2,2,6,6‐tetramethylpiperidinyl‐N‐oxyl and R was cumyl (Cum), 2‐tert‐butoxy‐carbonyl‐2‐propyl (PEst), phenylethyl (PhEt), 1‐tert‐butoxy‐carbonylethyl (EEst), or 1‐methoxycarbonyl‐3‐methyl‐3‐phenylbutyl (Acrylate‐Cum), was studied with ¹H NMR in the absence and presence of styrene and methyl methacrylate. The major products were alkenes and the hydroxylamine 1‐hydroxy‐2,2,6,6‐tetramethyl‐ piperidine (TEMPOH), and in monomer‐containing solutions, unimeric and polymeric alkoxyamines and alkenes were also found. Furthermore, the reactions between TEMPO and the radicals EEst and PEst were studied with chemically induced dynamic nuclear polarization. In comparison with coupling, TEMPO reacted with the radicals Cum, PEst, PhEt, and EEst and their unimeric styrene adducts by disproportionation to alkenes and TEMPOH only to a minor extent (0.6–3%) but with the radical adducts to methyl methacrylate to a considerable degree (≥20%). Parallel to the radical cleavage, TEMPO–EEst (but not the other alkoxyamines or TEMPO–Acrylate‐Cum) underwent substantial nonradical decay. The consequences for TEMPO‐mediated living radical polymerizations are discussed. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3604–3621, 2001     

“Living” radical graft polymerization of styrene to styrene butadiene rubber (SBR) with 2,2,6,6‐tetramethyl‐1‐piperidinyloxy (TEMPO)

Well‐defined graft copolymers with styrene butadiene rubber (SBR) backbones and polystyrene branches were synthesized by living free radical polymerization (LFRP) techniques. Thus 1‐ benzoyl‐2‐phenyl‐2‐(2′,2′,6′,6′‐tetramethyl‐piperidinyl‐1′‐oxy)ethane (BZ‐TEMPO) was synthesized and hydrolyzed to the corresponding 1‐hydroxyl derivative. This functional nitroxyl compound was coupled with brominated SBR (SBR‐Br). The resulting macroinitiator (SBR‐TEMPO) for “living” free radical polymerization was then heated in the presence of styrene for the formation of the controlled graft copolymer. ¹H‐NMR and IR spectroscopy were used to investigate the structure of the polymers. Copyright © 2004 John Wiley & Sons, Ltd.     

2,2,6,6‐Tetramethylpiperydinyl‐1‐oxyl (TEMPO) Functionalized Benzoxazines Prepared with a One‐Pot Synthesis for Reactive/Crosslinkable Initiators of Nitroxide Mediated Polymerization

In this work, the incorporation of a 2,2,6,6‐tetramethylpiperydinyl‐1‐oxyl (TEMPO) group to a benzoxazine ring is performed using a one‐pot synthesis for the preparation of TEMPO‐functionalized benzoxazine compounds and polymers as reactive and crosslinkable initiators for nitroxide‐mediated polymerization (NMP). The TEMPO‐functionalization reaction of benzoxazine, traced with ¹H NMR, is conducted with sequential radical transfer and coupling reactions. Moreover, polystyrene‐grafted polybenzoxazine copolymers are prepared with the TEMPO‐benzoxazine initiator and NMP of styrene. The polymerization system exhibits the characteristics of controlled radical polymerization, including controlled molecular weights of products and ability for sequential polymerization. Moreover, based on the chemical reactivity and crosslinking ability of benzoxazine groups, the synthesis route developed in this work will widen the scope of the design and synthesis of functional and high‐performance polymers.

     

Role of sodium dodecylbenzenesulfonate in 2,2,6,6‐tetramethy‐1‐piperidinyloxy‐mediated styrene miniemulsion polymerization

In studying 2,2,6,6‐tetramethy‐1‐piperidinyloxy (TEMPO)‐mediated styrene miniemulsions, we have observed that the surfactant sodium dodecylbenzenesulfonate (SDBS) not only provides colloidal stability but also influences the rate of polymerization. Increasing the SDBS concentration results in higher polymerization rates, although the molecular weight distribution and particle size distribution are not significantly impacted. We have also examined another common sulfonate surfactant, DOWFAX 8390. In contrast to SDBS, DOWFAX 8390 does not affect the polymerization rate. Furthermore, DOWFAX‐stabilized polymerizations are slower than SDBS‐stabilized polymerizations. TEMPO‐mediated bulk styrene polymerizations are also accelerated significantly in the presence of SDBS. Although the mechanism for the rate acceleration is unknown, the experimental evidence suggests that SDBS is participating in the generation of radicals capable of propagating, thereby reducing the TEMPO concentration within the particles. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5974–5986, 2006     

Factors influencing the C?ON bond strength of the alkoxyamines in the styrene–acrylonitrile–TEMPO copolymerization system

Homolytic bond dissociation energy (BDE) of the (C? ON) bond for several N‐alkoxyamines derived from 2,2,6,6‐tetramethylpiperidine‐1‐oxyl (TEMPO) and the corresponding (C? H) bonds were determined from quantum‐mechanical calculations including the B3‐LYP6‐31G(d), B3‐LYP/6‐311++G(2df,p), UB3‐LYP/6‐311+G(3df,2p), and integrated IMOMO (G3:ROMP2/6‐31G(d)) method. The investigated N‐alkoxyamines were considered as models for dormant forms of propagating chains in the radical copolymerization process of styrene with acrylonitrile in the presence of TEMPO according to the terminal and penultimate model. The substituent effect on BDE was investigated. Radical stabilization energies (RSE) for radicals created from homolysis of the investigated N‐alkoxyamines were calculated according to Rüchardt's method. Polar, steric, and stabilization effects on C? ON alkoxyamine bond homolysis were studied. A dramatically weakened C? ON bond in the alkoxyamine‐containing two consecutive styrene units in the propagating chain was ascribed to geometric parameters characterizing energetically unfavorable conformation of the substituents. These phenomena can be regarded as the penultimate effect in the radical living/controlled copolymerization system of styrene with acrylonitrile. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1165–1177, 2008     

Preparation of a copolymer of methyl methacrylate and 2‐(dimethylamino)ethyl methacrylate with pendant 4‐benzyloxy‐2,2,6,6‐tetramethyl‐1‐piperidinyloxy and its initiation of the graft polymerization of styrene by a controlled radical mechanism

The macroinitiator of a copolymer (PMD_BTM) of methyl methacrylate (MMA) and 2‐(dimethylamino)ethyl methacrylate (DAMA) with 4‐benzyloxy‐2,2,6,6‐tetramethyl‐1‐piperidinyloxy (BTEMPO) pendant groups was prepared by the photochemical reaction of tertiary amine groups of the copolymer with benzophenone in the presence of BTEMPO. The radical copolymerization of MMA and DAMA was carried out first with azo‐bis‐isobutyronitrile (AIBN) as an initiator; then, the dimethylamine groups of the copolymer constituted a charge‐transfer complex with benzophenone under UV irradiation, and the methylene of ternary amine and diphenyl methanol radicals were produced. The former was capped by BTEMPO, and the nitroxide (BTEMPO) was attached to the polymeric backbone. The amount of pendant BTEMPO on PMD_BTM was measured by ¹H NMR. PMD_BTM initiated the graft polymerization of styrene via a controlled radical mechanism, and the molecular weight of the PMD‐g‐polystyrene increased with the polymerization time. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 604–612, 2001     

Synthesis of star polymers via nitroxide mediated free‐radical polymerization: A “core‐first” approach using resorcinarene‐based alkoxyamine initiators

The synthesis of new octafunctional alkoxyamine initiators for nitroxide‐mediated radical polymerization (NMRP), by the derivatization of resorcinarene with nitroxide free radicals viz TEMPO and a freshly prepared phosphonylated nitroxide, is described. The efficiency of these initiators toward the controlled radical polymerization of styrene and tert‐butyl acrylate is investigated in detail. Linear analogues of these multifunctional initiators were also prepared to compare and evaluate their initiation efficiency. The favorable conditions for polymerization were optimized by varying the concentration of initiators and free nitroxides, reaction conditions, etc., to obtain well‐defined star polymers. Star polystyrene thus obtained were further used as macro‐initiator for the block copolymerization with tert‐butyl acrylate. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5559–5572, 2007     

Polymerization of styrene with tetramethylthiuram disulfide as an initiator in the presence of 2,2,6,6‐tetramethyl‐1‐piperidinyloxy

The bulk polymerization of styrene was investigated with tetramethylthiuram disulfide (TMTD) as an initiator in the presence of 2,2,6,6‐tetramethyl‐1‐piperidinyloxy (TEMPO) at 123 °C. The polymerization proceeded in a controlled/living way; that is, the polymerization rate was first‐order with respect to the monomer concentration, and the molecular weight increased linearly with conversion. The molecular weights of the polymers obtained were close to the theoretical values, and the molecular weight distributions were relatively low (weight‐average molecular weight/number‐average molecular weight = 1.1–1.3). The rate of polymerization with TMTD as an initiator was faster than that with benzoyl peroxide, and the rate was independent of the initial concentration of TMTD in the presence of TEMPO. The obtained polystyrene was functionalized with ultraviolet‐light‐sensitive ? SC(S)N(CH₃)₂ groups, which was characterized with ¹H NMR spectroscopy. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 543–551, 2005     

Photoinduced controlled/living free‐radical polymerization of 4‐methacryloyl‐1,2,2,6,6‐pentamethyl‐piperidenyl

The photoinduced solution polymerization of 4‐methacryloyl‐1,2,2,6,6‐pentamethyl‐piperidinyl (MPMP), used as a reactive hindered amine piperidinol derivative, was performed. The obtained MPMP homopolymer had a very narrow molecular weight distribution (1.06–1.39) according to gel permeation chromatography. The number‐average and weight‐average molecular weights increased linearly with the monomer conversion, this being characteristic of controlled/living free‐radical polymerizations. Electron spin resonance signals were detected in the MPMP homopolymer and in a polymer mixture solution, and they were assigned to nitroxide radicals, which were bound to the polymer chains and persisted at a level of 10^?9 mol/L during the polymerization. Instead of the addition of mediated nitroxide radicals such as 2,2,6,6‐tetramethyl‐piperidinyl‐1‐oxy (TEMPO), those radicals (>N? O ·) were formed in situ during the photopolymerization of MPMP, and so the reaction mechanism was understood as being similar to that of TEMPO‐mediated controlled/living free‐radical polymerization. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2659–2665, 2004     

β‐Hydrogen transfer from poly(methyl methacrylate) propagating radicals to the nitroxide SG1: Analysis of the chain‐end and determination of the rate constant

Methyl methacrylate (MMA) was polymerized in bulk at 70 °C in the presence of an alkoxyamine initiator with low dissociation temperature (the so‐called BlocBuilder?) and increasing amounts of free N‐tert‐butyl‐N‐(1‐diethylphosphono‐2,2‐dimethylpropyl) nitroxide (SG1). Low final monomer conversions were reached, indicating a loss in radical activity due to side reactions such as irreversible homoterminations between the propagating radicals and β‐hydrogen transfer (also called disproportionation) from a propagating radical to a free‐SG1 nitroxide. Proton NMR and MALDI‐TOF mass spectrometry were used to analyze the polymer chain‐ends and to clearly identify the main mechanism of irreversible termination. In particular, it was shown that all polymer chains were terminated by an alkene function in the presence of a large excess of free SG1, meaning that β‐hydrogen transfer from PMMA propagating radicals to the nitroxide SG1 was the major chain‐stopping event. On the other hand, for a low excess of free SG1, the two termination modes coexisted. Kinetic modeling was then performed using the PREDICI software, and the rate constant of β‐hydrogen transfer, k_βHtr, was estimated to be 1.69 × 10³ L mol^?1 s^?1 at 70 °C. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6333–6345, 2008     

Further evidence for the inseparability of the theoretical enthalpic terminal and penultimate unit effects in the radical copolymerization of styrene with acrylonitrile

The theoretical enthalpies of propagation reactions at 0 K without zero‐point vibrational energy corrections according to terminal and penultimate models of the radical copolymerization of styrene with acrylonitrile are reported from molecular orbital calculations at the following levels of theory and basis sets: HF/6‐31G(d); B3‐LYP/6‐31G(d); B3‐LYP/6‐311G(d,p) and B3‐LYP/6‐311+G(3df)//6‐311G(d,p). Both the enthalpic terminal and penultimate unit effects, determined according to the theoretical thermochemistry, depend on the level of theory and basis set used for the molecular orbital calculations. The best performing B3LYP/6‐311+G(3df)//B3LYP/6‐311G(d,p) procedure gives theoretical enthalpies for the addition of styrene and acrylonitrile to CH that differ from experimental values by 0.6 and 1.6 kcal mol^?1, respectively. An analysis of the results obtained here leads to the conclusion that at least for the styrene–acrylonitrile monomer system, that is, a monomer system known as one of the few systems that do not conform to terminal model composition and microstructure equations, the enthalpic terminal unit effects seem to depend on the penultimate units of the growing radical. This finding, together with the outcome from our previous work on the dependence of the penultimate effects on the terminal units in a growing macroradical, indicates the inseparability of the enthalpic terminal (implicit) and explicit penultimate unit effects on the radical copolymerization. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1778–1787, 2003     

Thermal self‐initiation of styrene in the presence of TEMPO radicals: Bulk and miniemulsion

In TEMPO (2,2,6,6,‐tetramethyl‐1‐piperidinyloxy) controlled styrene radical polymerizations, the thermal self‐initiation reaction of styrene monomer is one of the main sources for the deviations from ideal living polymerization. However, it is also important because it continuously generates radicals to compensate for the loss of radicals caused by the termination reactions and thereby maintains a reasonable reaction rate. In this report, different initial TEMPO concentrations were used in styrene miniemulsion polymerizations without any added initiator. The consumption rate of TEMPO or radical generation rate was calculated from the length of the induction period and the increasing total number of polymer chains. It was found that there is little difference between the miniemulsions and the corresponding bulk systems in terms of the length of the induction period, which increases linearly with initial TEMPO concentration. After the induction period, the consumption rate of TEMPO or radical generation rate was reduced to a lower level, and a faster initial polymerization rate was found in the bulk system compared to the corresponding miniemulsion system. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4921–4932, 2004     

Theoretical Study of Reactions between Oxygen‐Centered Radicals (•OH and SO4•—) and Vinyl Monomers in Aqueous Phase

In this work, reactions between industrially relevant monomers (methyl acrylate, ethyl acrylate, methyl methacrylate, vinyl acetate, and isopropenyl acetate) and oxygen‐centered radicals (^•OH and SO₄ ^•—) are studied using a combination of quantum mechanics and transition state theory. These reactions may have a strong influence on polymer structure and properties. Thus, computational methodologies able to estimate reliably coefficients for these reactions are needed to improve the understanding of emulsion polymerization processes. In the case of reactions involving ^•OH, the computational approach is based on the SMD‐water/M06‐2X/6‐311++G(3df, 2p)//B3LYP/6‐31+G(d, p) DFT scheme. All calculated and experimental Gibbs free energy barriers, , are within 1 kcal mol⁻¹. In the case of reactions involving SO₄^•—, the SMD‐water/M06‐2X/6‐311++G(3df, 2p)//CAM‐B3LYP/6‐31+G(d, p) DFT scheme is found to be more suitable than a similar scheme based on B3LYP. This proposed scheme works well for acrylates and methacrylates (errors within 1 kcal mol⁻¹), but it may overestimate the rate coefficients of acetates reacting with SO₄^{• —} .

     

Improving the control of styrene polymerization at 60 °C using a dialkylated α‐hydrogenated nitroxide

A new dialkylated α‐hydrogenated linear nitroxide and the corresponding 1‐phenylethyl alkoxyamine were synthesized in two and three steps, respectively. The alkoxyamine was involved in the polymerization of styrene at 60 °C, and the in situ concentration of nitroxide was monitored by electron spin resonance spectroscopy. The enhanced characteristics of these new alkylated alkoxyamine and nitroxide (k = 1.5 × 10^?4 s^?1 and k = 5.7 × 10⁴ L mol^?1 s^?1) yielded a monomer consumption one order of magnitude higher than styrene thermal polymerization. This resulted in well‐defined polystyrenes up to 70,000 g mol^?1 and the observation of a control occurring through the establishment of the radical persistent effect, that is, ln([M]₀/[M]) = t^2/3. Experimentally determined kinetic constants were involved in PREDICI modelings to investigate the influence of temperature and initial alkoxyamine concentration on the kinetics as well as on the livingness and the controlled character of the polymerization. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

A versatile approach for the preparation of end‐functional polymers and block copolymers by stable radical exchange reactions

A versatile strategy for the preparation of end‐functional polymers and block copolymers by radical exchange reactions is described. For this purpose, first polystyrene with 2,2,6,6‐tetramethylpiperidine‐1‐oxyl end group (PS‐TEMPO) is prepared by nitroxide‐mediated radical polymerization (NMRP). In the subsequent step, these polymers are heated to 130 °C in the presence of independently prepared TEMPO derivatives bearing hydroxyl, azide and carboxylic acid functionalities, and polymers such as poly(ethylene glycol) (TEMPO‐PEG) and poly(ε‐caprolactone) (TEMPO‐PCL). Due to the simultaneous radical generation and reversible termination of the polymer radical, TEMPO moiety on polystyrene is replaced to form the corresponding end‐functional polymers and block copolymers. The intermediates and final polymers are characterized by ¹H NMR, UV, IR, and GPC measurements. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2387–2395     

The Rearrangement of 2,2‐Diphenyl‐1‐[(E)‐2‐phenylethenyl]cyclopropane to 3,4,4‐Triphenylcyclopent‐1‐ene: a DFT Analysis

A computational study on the rearrangement of 2,2‐diphenyl‐1‐[(E)‐2‐phenylethenyl]cyclopropane ( 1 ) is presented, using density functional theory (DFT), (U)B3LYP with the 6‐31G* basis set (DFT1) and (U)M05‐2X with the 6‐311+G** basis set (DFT2). In agreement with a biradical character of the transition structure (TS) or intermediate, the potential‐energy hypersurface is lowered by the influence of three conjugated Ph groups. Surprisingly, two conformations of the geminal diphenyl group (different twist angles) induce two different minimum‐energy pathways for the rearrangement. Independent of the functional used, the first hypersurface harbors true biradical intermediates, whereas the second energy surface is a flat, slightly ascending slope from the starting material to the TS. The functional (U)M05‐2X with the basis set 6‐311+G** provides realistic energies which seem to be close to experiment. The activation energy for racemization of enantiomers of 1 is lower than that of rearrangement by 2.5 kcal mol^?1, in agreement with experiment.     

Some novel accelerating agents for nitroxide‐mediated living free‐radical polymerization

Malononitrile (MN), trifluoroacetic acid anhydride, acetylacetone, acetoacetic ester, and diethyl malonate have been identified as novel rate‐accelerating additives for nitroxide‐mediated living free‐radical polymerization. Among these additives, MN has the greatest accelerating effect. Adding MN at an MN/2,2,6,6‐tetramethylpiperidine‐oxyl (TEMPO) molar ratio of 4.0 results in a nearly 20 times higher rate of polymerization of styrene (St), and adding MN at an MN/TEMPO molar ratio of 2.5 results in a nearly 15 times higher rate of copolymerization of St and methyl methacrylate. The polymerization of St proceeds in a living fashion, as indicated by the increase in the molecular weight with time and conversion and the relatively low polydispersity. The polymerization rate of St is so quick that the conversion reaches 70% within 1 h at 125 °C when the molar ratio of MN to TEMPO is 4:1. Moreover, the reaction temperature can be reduced to 110 °C. A possible explanation for this effect is that the formation of hydrogen bonds between the MN and TEMPO moiety weakens the C? ON bond at the end of the polymer chain. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5246–5256, 2005     

Nitroxide partitioning between styrene and water

Research into nitroxide‐mediated radical polymerization (NMRP) performed in emulsions and miniemulsions has progressed significantly over the past several years. However, our knowledge of the conditions during polymerization (e.g., the nitroxide concentrations in the aqueous and organic phases) is incomplete, and as such we have yet to achieve a clear understanding of the mechanisms involved in these processes. To better understand the conditions present in heterogeneous NMRP, we measured the partition coefficients of 2,2,6,6‐tetramethylpiperidinyl‐1‐oxy (TEMPO), 4‐hydroxy‐TEMPO, and 4‐amino‐TEMPO between styrene and water from 25 to 135 °C. Experiments were performed in a 250‐mL Parr reactor that was equipped for the simultaneous sampling of the aqueous and organic phases. Aqueous‐phase and organic‐phase nitroxide concentrations were measured with ultraviolet–visible spectrophotometry. Experiments were also performed at 135 °C in the presence of hexadecane (costabilizer), polystyrene, and sodium dodecylbenzenesulfonate (surfactant) to determine the effects of the miniemulsion polymerization recipe ingredients on the partitioning of TEMPO and 4‐hydroxy‐TEMPO. On the basis of the measured partition coefficients (expressed as the ratio of the nitroxide concentration in the organic phase to the nitroxide concentration in the aqueous phase), 4‐hydroxy‐TEMPO was the most hydrophilic of the nitroxides investigated, followed by 4‐amino‐TEMPO and TEMPO. Hexadecane, polystyrene, and sodium dodecylbenzenesulfonate did not have a significant influence on the partitioning of these nitroxides at 135 °C. Experiments with ethylbenzene instead of styrene demonstrated that thermally generated radicals were not responsible for the observed temperature effects on the measured partition coefficients. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1081–1089, 2001