Photophysical and electrochemical properties of monoporphyrin rare earth liquid crystalline materials

The synthesis and characterization of [5-(p-alkacyloxy ) phenyl-10,15,20-tri-phenyl] porphyrin (APTPP) and its lanthanide complexes(lanthanide ions: Ho(III), Dy(III), Er(III), Yb(III)) are reported. They form hexagonal columnar discotic columnar (Col_h) liquid crystals over an extended domain of temperature. Luminescence spectra of the compounds are discussed. Quantum yields of Q band are in the region 0.004570-0.05847. The electrochemical property is studied by cyclic voltammetry. The synthesized APTPP and its lanthanide complexes exhibit two one-electron reversible redox reactions and three redox reactions, respectively. The photovoltaic properties and charge-transfer process of the liquid crystalline compounds are investigated by surface photovoltage spectroscopy (SPS) and electric-field-induced surface photovoltaic spectroscopy (EFISPS) techniques, and the bands are analogous with the ultraviolet (Uv) -visible absorption spectra, which reveal that all compounds are P-type semiconductors. All of compounds are nonelectrolytes.     

Physicochemical characterization of paramagnetic ionic liquids 1‐vinyl‐3‐alkylimidazolium tetrahalogenidoferrate(III) [VRIM][FeClmBr4 − m]

Using microwave‐assisted synthesis method, a series of paramagnetic ionic liquids comprising 1‐vinyl‐3‐alkylimidazolium VRIM⁺ cation and tetrahalogenidoferrate (III) FeCl_mBr_{4 ? m}^? anion were designed and synthesized. The structure was analyzed using ¹H NMR and Raman spectroscopy. Ultraviolet–visible absorption spectra, thermal stability, magnetic susceptibility, viscosity, ionic conductivity, and solubility were characterized. Results show that elongation of the alkyl chain leads to replacement of bromides with a small amount of chlorides in the anion, shifting of UV maximum absorption peaks to shorter wavelengths, reduction of ionic conductivity, and solubility in polar solvents, as well as increase in fluidity, magnetic susceptibility, and solubility in nonpolar solvents. Copyright © 2014 John Wiley & Sons, Ltd.     

Surface photovoltage,band-bending and surface states on a-Si : H

We have measured the surface photovoltage (SPV) of intrinsic (i.e., undoped) and phosphorus-doped amorphous Si : H between ?168 and 25°C in the spectral range from 0.5 to 2.5 eV. The a-Si : H was grown in a silane glow discharge. Vibrating Kelvin probe techniques were used for the SPV measurements; Auger spectroscopy was used for monitoring surface cleanliness and chemistry. At all temperatures and for both materials, (1) the SPV was invariably negative, (2) there was no correlation between the spectral, thermal and response-time properties of the SPV and the bulk photoconductivity, and (3) surface treatments such as sputtering and oxygen physisorption strongly affected the SPV but not the photoconductivity. These facts indicated that the SPV was due to the emptying of surface-states via surface transitions, and corresponded to the flattening of bands which, when unilluminated, were bent upwards. Intrinsic material showed a maximum SPV of about 0.2 V. The SPV was characterized at ?168°C by strong electronic isolation between surface-states and valence band (i.e., once light was removed, there was no surface-state refilling or decay of the SPV), slow rise times (～min), saturation at photon fluxes of about 10¹¹/cm² · s, and a SPV spectral threshold occurring at 0.7 eV. At 25°C, all SPV responses were much faster (<0.5 s) and the optical threshold was 0.9 eV. The thermal activation energies associated with the SPV were 0.11 eV for surface-state emptying and 0.22 eV for surface-state refilling. For P-doped material the maximum SPV at ?168°C was 0.3 V and its properties indicated less electronic isolation between surface-states and valence band. There was no SPV at room temperature. Our results are discussed in terms of an energy level scheme which contains a distribution of filled surface states isolated from both conduction and valence bands. The surface-state density is estimated to be about (1?2) × 10¹¹/ cm², a relatively low value which is consistent with the observed lack of Fermi level pinning. In both materials there is a very fast component of the SPV which suggests the presence of additional surface states below the valence band edge.     

1,1,1‐Trichloro‐3‐(1‐phenethylamino‐ethylidene)‐ pentane‐2,4‐dione—synthesis,spectroscopic, theoretical and structural elucidation

1,1,1‐Trichloro‐3‐(1‐phenethylamino‐ethylidene)‐pentane‐2,4‐dione is spectroscopically and structurally elucidated by means of linear‐polarized IR spectroscopy (IR‐LD) of oriented solids as a colloidal suspension in nematic liquid crystal. Structural information and IR‐spectroscopic assignment are supported by quantum chemical calculations at MP2 and B3LYP level of theory and 6‐311++G** basis set. The geometry is characterized with an inramolecular hydrogen bond of NH^…O?C with length of 2.526 Å and a NHO angle of 140.5(1)°. The NH? C(CH₃)C?C? C?O(CH₃) fragment is nearly flat with a maximal deviation of total planarity of 10.4°. Copyright © 2007 John Wiley & Sons, Ltd.     

Surface photovoltage spectroscopy of electronic surface states on cleaved germanium(111) surfaces

Surface photovoltage (SPV) measurements on UHV cleaved Ge(111) surfaces at 100 K are reported for photon energies 0.4 < ?ω < 1 eV. The SPV spectra are sensitive to surface treatment. Upon annealing to temperatures above 200°C, which is accompanied by a reconstruction change from the (2 × 1) to an (8) superstructure, the SPV spectrum shows 2 shoulders below band gap energy with threshold energies near 0.4 and 0.45 eV. These structures are interpreted in terms of electronic transitions from the valence band into empty surface state levels which are related to the (8) superstructure. Adsorbed oxygen and water vapor both cause new similar transitions from the valence band into empty surface states at 0.08 eV below the bottom of the conduction band.     

The interaction of iron and metal‐free meso‐tetra (4‐sulfonatophenyl) porphines with CVD graphene: a comparative Raman spectroscopy study

In this work, a non‐covalent interaction of iron and metal‐free meso‐tetra (4‐sulfonatophenyl) porphines (FeTPPS and TPPS, respectively) with high‐quality single‐layer graphene is studied by Raman spectroscopy. Such a kind of graphene functionalization is promising for a development of novel optoelectronic devices and sensors. Our results show that the central metal atom of porphyrin macrocycle, iron particularly, plays an important role in the integrity of FeTPPS on graphene surface; however, the predicted Raman enhancement is not significant. The interaction of metal‐free TPPS with graphene leads to the deprotonation of TPPS molecules and higher Raman enhancement values. Moreover, initially deprotonated TPPS solutions after the adsorption onto the graphene surface demonstrate the appearance of new Raman bands and significantly enhanced Raman signals. We propose that a strong interaction between deprotonated TPPS and graphene is realized through pyrrole and desulfonated phenyl rings of closely located planar TPPS molecules on the graphene surface. The results show that both the protonation of porphyrin macrocycle and the existence of central metal atom are crucial for a formation of nanocomposites with defined electronic properties. Copyright © 2014 John Wiley & Sons, Ltd.     

UV‐induced transformations of matrix‐isolated 1,3,4‐thiadiazole‐2‐thiones

Monomers of 5‐mercapto‐1,3,4‐thiadiazole‐2‐thione (bismuthiol) were studied using an experimental matrix‐isolation technique as well as by carrying out theoretical quantum chemical calculations. The calculations, performed using the quadratic configuration interaction method with single and double excitations (QCISD)/6‐31++G(d,p)//DFT(B3LYP)/6‐311++G(2d,p), predict that the thione–thiol tautomer of bismuthiol should be significantly (by more than 19 kJ mol^?1) more stable than other tautomeric forms. Accordingly, only the signatures of the thione–thiol tautomer were observed in the FT‐IR spectrum of bismuthiol, recorded directly after deposition of an Ar matrix. UV (λ > 320 nm) irradiation induced the conversion of the thione–thiol tautomer into the dithiol form. Analogous investigations were carried out for two related compounds: 5‐methyl‐1,3,4‐thiadiazole‐2‐thione and 5‐methylthio‐1,3,4‐thiadiazole‐2‐thione. For these two species, only the thione tautomeric forms were observed after deposition of Ar matrices. These tautomers were predicted (by QCISD calculations) to be more stable (by at least 19 kJ mol^?1) than other tautomeric forms. Upon UV irradiation, the most stable thione forms of these compounds were transformed into the corresponding thiol tautomers. Direct observation of the thione → thiol phototautomeric processes provides a clear proof that intramolecular proton transfer reaction can occur in molecules, such as bismuthiol, in spite of the increased NH···S distance, in comparison to other phototautomerizing species studied so far. All the isomers of the studied compounds (substrates and products of the photoreactions) were identified by comparison of their IR spectra with the spectra calculated at the DFT(B3LYP)/6‐311++G(2d,p) level of theory for possible isomeric structures. Copyright © 2009 John Wiley & Sons, Ltd.     

Catalysis by hydrogen chloride in the gas‐phase elimination kinetics of 2‐phenyl‐2‐propanol and 3‐methyl‐1‐buten‐3‐ol

A homogeneous, molecular, gas‐phase elimination kinetics of 2‐phenyl‐2‐propanol and 3‐methyl‐1‐ buten‐3‐ol catalyzed by hydrogen chloride in the temperature range 325–386 °C and pressure range 34–149 torr are described. The rate coefficients are given by the following Arrhenius equations: for 2‐phenyl‐2‐propanol log k₁ (s^?1) = (11.01 ± 0.31) ? (109.5 ± 2.8) kJ mol^?1 (2.303 RT)^?1 and for 3‐methyl‐1‐buten‐3‐ol log k₁ (s^?1) = (11.50 ± 0.18) ? (116.5 ± 1.4) kJ mol^?1 (2.303 RT)^?1. Electron delocalization of the CH₂?CH and C₆H₅ appears to be an important effect in the rate enhancement of acid catalyzed tertiary alcohols in the gas phase. A concerted six‐member cyclic transition state type of mechanism appears to be, as described before, a rational interpretation for the dehydration process of these substrates. Copyright © 2007 John Wiley & Sons, Ltd.     

Raman spectroscopy of sol–gel derived titanium oxide thin films

Raman spectra of TiO₂ films prepared via the sol–gel process were studied by UV and visible Raman spectroscopy. The evolution of the phases of TiO₂ films during annealing was investigated, and the relative intensities of the Raman bands excited with 325 nm were found to be distinct from those of the bands excited with 514 nm. The transmittance and FTIR spectra of the films annealed at different temperatures were characterized. The crystallization process of the powders and thin films treated by different annealing methods were also studied with Raman spectroscopy. The results show that the change in the relative intensities is caused by the resonance Raman effect. The anatase to rutile transition of the powder occurs at 700 °C, while that of the thin film occurs at 800 °C. The analysis of Raman band shape (peak position and full width at half‐maximum) after conventional furnace annealing and rapid thermal annealing indicates the influence of the non‐stoichiometry and phonon confinement effect. Copyright © 2011 John Wiley & Sons, Ltd.     

Enhanced photoactivity of CuPp-TiO2 photocatalysts under visible light irradiation

Three novel porphyrins, 5,10,15-tri-phenyl-20-[4-(3-phenoxy)-propoxy]phenyl porphyrin, 5,15-di-phenyl-10,20-di-[4-(3-phenoxy)-propoxy]phenyl porphyrin and 5-phenyl-10,15,20-tri- [4-(3-phenoxy)-propoxy]phenyl porphyrin, and their corresponding copper(II) complexes were synthesized and characterized spectroscopically. The photocatalytic effects of TiO₂ samples impregnated with copper(II) porphyrins was investigated by photodegradation of 4-nitrophenol (4-NP) in aqueous solution under visible light. The photocatalysts were characterized by means of scanning electron microscopy (SEM), X-ray diffraction (XRD), UV-vis spectra and FT-IR spectra. The results indicated that CuPps were successfully loaded and interacted with the surface of TiO₂ microsphere, which is crucial to enhance the activity of the catalytic composite under visible light.     

Thermolysis and photolysis of 2‐ethyl‐4‐nitro‐1(2H)‐isoquinolinium hydroperoxide

The thermal and light‐induced O ? O bond breaking of 2‐ethyl‐4‐nitro‐1(2H)‐isoquinolinium hydroperoxide (IQOOH) were studied using ¹H NMR, steady‐state UV/vis spectroscopy, femtosecond UV/vis transient absorption (fs TA) and time‐dependent density functional theory (TD DFT) calculations. Thermal O ? O bond breaking occurs at room temperature to generate water and the corresponding amide. The rate of this reaction, k = 5.4 · 10^?6 s^?1, is higher than the analogous rates of simple alkyl and aryl hydroperoxides; however, the rate significantly decreases in the presence of small amounts of methanol. The calculated structure of the transition state suggests that the thermolysis is facilitated by a 1,2 proton shift. The photochemical process yields the same products, as confirmed using NMR and UV/vis spectroscopy. However, the quantum yield for the photolysis is low (Φ = 0.7%). Fs TA studies provide additional detail of the photochemical process and suggest that the S₁ state of IQOOH undergoes fast internal conversion to the ground state, and this process competes with the excited‐state O ? O bond breaking. This result was supported by the fact that the model compound IQOH exhibits similar excited‐state decay lifetimes as IQOOH, which is assigned to the S₁ → S₀ internal conversion. Copyright © 2013 John Wiley & Sons, Ltd.     

Adsorption study of 4‐MBA on TiO2 nanoparticles by surface‐enhanced Raman spectroscopy

In this paper, the adsorption of 4‐mercaptobenzoic acid (4‐MBA) on TiO₂ nanoparticles was studied mostly by surface‐enhanced Raman spectroscopy (SERS) and UV‐vis spectroscopy, at different pH values as well as under different temperatures and concentrations. The results show that the 4‐MBA molecules are bonded to the TiO₂ surface both through the sulfur atoms and COO⁻ groups at neutral or alkaline pH, but only through the sulfur atom at acidic pH. Furthermore, the 4‐MBA molecules possess high adsorptive stability on TiO₂ at a comparatively high temperature (150 °C). Concentration‐dependent SERS experiments show that the saturation concentration for 4‐MBA adsorbed on TiO₂ is about 10⁻³ M in natural case (pH = 6). Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis,characterization, and electrochemical properties of imidazole derivatives functionalized single‐walled carbon nanotubes

The imidazole derivatives functionalized single‐walled carbon nanotubes (SWNTs) were synthesized by a diazonium‐based reaction. We have designed and synthesized two imidazole derivatives to modify SWNTs. The resulting products were characterized by Fourier transform infrared (FT‐IR) spectroscopy, Raman spectroscopy, ultraviolet visible (UV/Vis) spectroscopy, thermo gravimetric analysis (TGA), energy dispersive X‐ray spectroscopy (EDX), transmission electron microscopy (TEM), and atomic force microscopy (AFM). Electrochemical measurements via a cyclic voltammetry method revealed that the weak intramolecular electronic interactions presented between the attached imidazole derivatives groups and the nanotubes. Copyright © 2008 John Wiley & Sons, Ltd.     

Conformational analysis of 3,3‐dimethyl‐3‐silathiane, 2,3,3‐trimethyl‐3‐silathiane and 2‐trimethylsilyl‐3,3‐dimethyl‐3‐silathiane—preferred conformers,barriers to ring inversion and substituent effects

The first conformational analysis of 3‐silathiane and its C‐substituted derivatives, namely, 3,3‐dimethyl‐3‐silathiane 1 , 2,3,3‐trimethyl‐3‐silathiane 2 , and 2‐trimethylsilyl‐3,3‐dimethyl‐3‐silathiane 3 was performed by using dynamic NMR spectroscopy and B3LYP/6‐311G(d,p) quantum chemical calculations. From coalescence temperatures, ring inversion barriers ΔG^≠ for 1 and 2 were estimated to be 6.3 and 6.8 kcal/mol, respectively. These values are considerably lower than that of thiacyclohexane (9.4 kcal/mol) but slightly higher than the one of 1,1‐dimethylsilacyclohexane (5.5 kcal/mol). The conformational free energy for the methyl group in 2 (?ΔG° = 0.35 kcal/mol) derived from low‐temperature ¹³C NMR data is fairly consistent with the calculated value. For compound 2 , theoretical calculations give ΔE value close to zero for the equilibrium between the 2 ‐Me_ax and 2 ‐Me_eq conformers. The calculated equatorial preference of the trimethylsilyl group in 3 is much more pronounced (?ΔG° = 1.8 kcal/mol) and the predominance of the 3 ‐SiMe_{3 eq} conformer at room temperature was confirmed by the simulated ¹H NMR and 2D NOESY spectra. The effect of the 2‐substituent on the structural parameters of 2 and 3 is discussed. Copyright © 2010 John Wiley & Sons, Ltd.     

Characterization of polycyclic aromatic hydrocarbons using Raman and surface‐enhanced Raman spectroscopy

Polycyclic aromatic hydrocarbons (PAHs) are ubiquitous atmospheric pollutants and food contaminants, which exhibit potent carcinogenicity, mutagenicity, and teratogenicity. Vibrational spectroscopy techniques, especially Raman spectroscopy and surface‐enhanced Raman spectroscopy (SERS), can be potentially used as an alternative technique to liquid and gas chromatography in PAH analysis. However, there is limited information on the intrinsic Raman and SERS fingerprints of PAHs. In this study, we have acquired the Raman and SERS spectra of seven PAH compounds and compared their experimental spectra with theoretical Raman spectra calculated by density function theory (DFT). The vibrational modes corresponding to the Raman peaks have also been assigned using DFT. Characteristic Raman and SERS peaks have been identified for five PAH compounds, and the limits of detection were estimated. Such information could be useful for developing SERS assays for simple and rapid PAH identification. Copyright © 2014 John Wiley & Sons, Ltd.     

Photoinduced decarboxylation of 9‐oxo‐6,9‐dihydro[1,2,5]selenadiazolo[3,4‐f]quinoline‐8‐carboxylic acid

Photoinduced reactions of 9‐oxo‐6,9‐dihydro[1,2,5]selenadiazolo[3,4‐f]quinoline‐8‐carboxylic acid (SeQCA) were investigated in alkaline media (aqueous NaOH solutions) by electron paramagnetic resonance (EPR) spectroscopy, following the in situ formation of paramagnetic species. According to UV–Vis and nuclear magnetic resonance investigations, protonation (pH ≈ 11) and deprotonation (pH ≈ 13) of the imino hydrogen of the 4‐pyridone moiety has to be considered, reflected also in the different EPR spectra observed upon irradiation. Photoinduced generation of radicals was found only for carboxylate substituted SeQCA; other studied selenadiazoloquinolone derivatives, together with those substituted at the C(8) position (R = H, COOCH₂CH₃, COOCH₃, COCH₃ or CN), did not generate paramagnetic species during exposure. Consequently, photodecarboxylation was suggested as the decisive step, accompanied by the decomposition of the selenadiazole ring, resulting in the formation of ortho‐hydroxylate anions. EPR parameters elucidated from experimental EPR spectra obtained at pH ≈ 11 and pH ≈ 13 indicate the formation of oxygen‐centered radicals at the decarboxylated 4‐pyridone ring. EPR spin trapping experiments with nitromethane confirmed a very effective photoinduced electron transfer from all the selenadiazoloquinolones investigated. Copyright © 2011 John Wiley & Sons, Ltd.     

3H‐1,2‐Dithiole‐3‐thione derivatives as novel solvatochromic dyes

The UV–Vis spectrum of 5‐(1‐butylthio)‐3H‐1,2‐dithiole‐3‐thione (1a) and that of the chromium pentacarbonyl complex of 5‐methyl‐3H‐1,2‐dithiole‐3‐thione (3) present significant changes with the solvent polarity. The two absorption bands shown by the compounds in the region above 300 nm were identified by theoretical calculations. For Compound 1a these are n→π^* and →π^* transitions and for Compound 3 the longest wavelength absorption corresponds to a charge transfer band and shows a remarkably negative solvatochromism. Not only has the wavelength of maximum absorption changed with the solvent but also the ratio of the absorbances at the two wavelengths. The effect of solvents was correlated with solvatochromic parameters such as π^* and α. The spectrum of 5‐(1‐butylthio)‐3H‐1,2‐dithiole‐3‐one ( 2 ) was also measured in different solvents but in this case the changes observed are less significant than for the other two compounds. The spectra of 1a and 3 were also determined in the presence of anionic (SDS), cationic (CTAB), and neutral surfactants (Brig‐35) and it is shown that these compounds can be used as probes for the polarity of the binding sites of organized assemblies. Copyright © 2008 John Wiley & Sons, Ltd.     

Experimental and theoretical study on 3,5‐(oxo/thioxo) derivatives of 2,7‐dimethyl‐1,2,4‐triazepines–iodine molecular complexes

Intermolecular charge‐transfer (CT) spectra of 3‐thioxo‐5‐oxo‐, 5‐thioxo‐3‐oxo‐, and 3,5‐dithioxo‐ derivatives of 2,7‐dimethyl‐[1,2,4]‐triazepine 1:1 molecular complexes with molecular iodine were studied in the UV‐visible region. Equilibrium constants and free energy changes of the formed complexes were determined in solution. Ab initio calculations at HF/LANL2DZ* and MP2/LANL2DZ* were carried out to establish the nature of the complexation site, to determine the complex structures, and to examine the basicity of these compounds toward molecular iodine. The 3,5‐dithioxo‐2,7‐dimethyl‐[1,2,4]‐triazepine is the most basic one toward molecular iodine. In all cases, the complexation takes place at the heteroatom attached to position 3 of the triazepine. Hence, although in general, thiocarbonyls are stronger bases than carbonyls in the gas phase, 5‐thioxo‐2,7‐dimethyl‐[1,2,4]‐triazepin‐3‐one behaves as an oxygen base towards I₂. Experimental free energies in solution and gas‐phase computational values are linearly correlated. Copyright © 2009 John Wiley & Sons, Ltd.     

In situ monitoring of solid‐state transition of p‐aminobenzoic acid polymorphs using Raman spectroscopy

The purpose of this study is to investigate the mechanism of solid‐state polymorphic transition of p‐aminobenzoic acid (PABA) using in situ Raman spectroscopy measurement. The polymorphic transition experiments were conducted on a micro quartz vessel mounted on a microscope, hot and cold stage, under isothermal conditions. The temperature was precisely controlled by a standalone temperature controller equipped with liquid nitrogen cooling system. The Raman spectroscopy probe was positioned on the surface of the solid sample in the micro vessel. The polymorphic transition progression was in situ monitored and recorded by Raman spectroscopy. Based on the polymorphic transition rate resulted from the quantitative analysis of Raman spectra, the mechanism of solid‐state polymorphic transition of PABA was examined by various empirical kinetic models. An Arrhenius analysis was also performed to calculate activation energies from 134.7 kJ mol⁻¹ to 137.7 kJ mol⁻¹ for the transition. The results demonstrated that in situ Raman spectroscopy is a valuable and accurate technique to probe polymorphic transition process. Copyright © 2009 John Wiley & Sons, Ltd.     

Raman spectroscopy of the transition of α‐gallium oxyhydroxide to β‐gallium oxide nanorods

The thermo‐Raman spectra of synthesised α‐gallium oxyhydroxide nanorod prove that the transition of α‐gallium oxyhydroxide to β‐gallium oxide nanorods occurs above 350 °C but below 400 °C. Scanning electron microscopy proves that the morphology of the α‐gallium oxyhydroxide nanorods is retained upon calcination to β‐gallium oxide. X‐ray diffraction patterns show that the nanorods are α‐gallium oxyhydroxide converting upon calcination to β‐gallium oxide. Intense Raman bands are observed at 190, 262, 275, 430, 520, 605, and 695 cm⁻¹, which undergo a red shift of ∼5 cm⁻¹ upon heating to 350 °C. Upon thermal treatment above 350 °C, the Raman spectrum shows a significantly different pattern. Raman bands are observed at 155, 212, 280, 430, 570, and 685 cm⁻¹. The thermo‐Raman spectra are in harmony with the TG and DTG patterns, which show that the reaction of α‐gallium oxyhydroxide to β‐gallium oxide occurs at 365 °C. Copyright © 2008 John Wiley & Sons, Ltd.