Pulsed laser deposition of Zr–N codoped <Emphasis Type="Italic">p</Emphasis>-type ZnO thin films

Present p-type ZnO films tend to exhibit high resistivity and low carrier concentration, and they revert to their natural n-type state within days after deposition. One approach to grow higher quality p-type ZnO is by codoping the ZnO during growth. This article describes recent results from the growth and characterization of Zr–N codoped p-type ZnO thin films by pulsed laser deposition (PLD) on (0001) sapphire substrates. For this work, both N-doped and Zr–N codoped p-type ZnO films were grown for comparison purposes at substrate temperatures ranging between 400 to 700 °C and N₂O background pressures between 10⁻⁵ to 10⁻² Torr. The carrier type and conduction were found to be very sensitive to substrate temperature and N₂O deposition pressure. P-type conduction was observed for films grown at pressures between 10⁻³ to 10⁻² Torr. The Zr–N codoped ZnO films grown at 550 °C in 1×10⁻³ Torr of N₂O show p-type conduction behavior with a very low resistivity of 0.89 Ω-cm, a carrier concentration of 5.0×10¹⁸ cm⁻³, and a Hall mobility of 1.4 cm² V⁻¹ s⁻¹. The structure, morphology and optical properties were also evaluated for both N-doped and Zr–N codoped ZnO films.     

Characterization of defect type and dislocation density in double oxide heteroepitaxial CeO2/YSZ/Si(001) films

In order to qualitatively and quantitatively analyze the structural defects including the defect types and their concentrations in oxide heteroepitaxial films, a new X-ray rocking-curve width-fitting method was used in the case of doubleCeO₂/YSZ/Si (YSZ=yttria-stabilized ZrO₂) films that were prepared by pulsed laser deposition. Two main defect types, angular rotation and oriented curvature, were found in both CeO₂ and YSZ. Dislocation densities of CeO₂ and YSZ, which were obtained from the angular rotations, are functions of the YSZ thickness. A distinct two-step correlation between dislocation densities of CeO₂ and YSZ was found that as the dislocation density of YSZ is higher than 2.4×10¹¹ cm^-2, the dislocation density of CeO₂ shows a high sensitivity with that of YSZ compared with the low relativity in lower dislocation density (<2.4×10¹¹ cm^-2). In addition, YSZ always has higher dislocation densities and oriented curvatures than CeO₂ in each specimen, which can be attributed to the smaller mosaic domain sizes in YSZ than in CeO₂ as observed by high-resolution transmission electron microscopy. Received: 12 August 2002 / Accepted: 14 August 2002 / Published online: 4 December 2002 RID="*" ID="*"Corresponding author. Fax: +81-3/5734-3369, E-mail: chun_hua_chen@hotmail.com     

Synthesis of nanocrystalline material by sputtering and laser ablation at low temperatures

Physical vapor deposition techniques such as sputtering and laser ablation – which are very commonly used in thin film technology – appear to hold much promise for the synthesis of nanocrystalline thin films as well as loosely aggregated nanoparticles. We present a systematic study of the process parameters that facilitate the growth of nanocrystalline metals and oxides. The systems studied include TiO₂, ZnO, γ-Al₂O₃, Cu₂O, Ag and Cu. The mean particle size and crystallographic orientation are influenced mainly by the sputtering power, the substrate temperature and the nature, pressure and flow rate of the sputtering gas. In general, nanocrystalline thin films were formed at or close to 300 K, while loosely adhering nanoparticles were deposited at lower temperatures. Received: 31 October 2000 / Accepted: 9 January 2001 / Published online: 26 April 2001     

Room-temperature epitaxial growth of CeO2(001) films on YSZ buffered Si(001) substrates

2 (001) epitaxial thin films deposited on Si(001) with yttria-stabilized zirconia buffers have been obtained for the first time at room temperature by pulsed-laser deposition. The influence of oxygen pressure on the crystal quality of CeO₂ was studied for the films deposited at 100 °C. The rocking curve full width at half maximum of the CeO₂(002) peak for films deposited at room temperature and 100 °C was between 1° and 2°, for oxygen pressures below 3×10^-2 mbar. The best crystal quality was obtained at around 3×10^-3 mbar. Epitaxial growth at room temperature was confirmed by cross-sectional transmission electron microscopy. Scanning electron microscopy and atomic force microscopy revealed very smooth surfaces for oxygen pressure below 3×10^-2 mbar, with rms roughness values around 0.3 nm over 5 μm×5 μm. Received: 25 September 1997/Accepted: 22 April 1998     

Anomalous Hall effect in sputter-deposited CoxTi1−xO2–δ films

Hall effect measurements were performed on epitaxial Co_xTi_1−xO_2–δ thin films grown on (0 0 1) LaAlO₃ by reactive RF magnetron co-sputter deposition. Magnetization measurements reveal ferromagnetic behavior in M–H loop at room temperature for Co_xTi_1−xO_2–δ thin films for which x?0.02. An anomalous Hall effect was observed for Co_0.10Ti_0.90O_2−δ films grown with the partial pressure of water P(H₂O)=4×10⁻⁴ Torr or less. These films exhibit a positive ordinary Hall coefficient and a positive magnetoresistance. X-ray diffraction on films grown under these conditions shows evidence for Ti_nO_2n−1 phase due to the deficiency of oxygen. In contrast, Hall measurements taken for undoped and Co-doped TiO₂ thin films grown under more oxidizing conditions show only the ordinary Hall effect with a negative Hall coefficient consistent with n-type conduction. For these films, the magnetoresistance was positive and increased monotonically with increasing magnetic field. The results suggest that Co-doped Ti_nO_2n−1 may be a dilute magnetic semiconducting oxide for which the carriers couple to the spin polarization.     

UV-CVD deposited SiNH films on InP: Optimization of the physico-chemical and interface properties

High quality silicon nitride films are deposited at low temperature on InP substrates by direct photolysis at 185 nm of a NH₃-SiH₄ gas mixture. The composition of the films is measured by nuclear analysis. The thickness and refractive index are obtained by ellipsometry at 632.8 nm. As-deposited and post annealed samples are electrically characterized: quasi-static I(V) at 5×10^–4 Hz and C(V) characteristics at 1 MHz are performed on InP MIS diodes structures in order to optimize bulk and interface properties. At 250° C and 4 Torr, it is found that the highest critical field (measured for a leakage current density of 10^–9 A/cm²) is obtained for the injected ratio [SiH₄]/[NH₃]=2%. For these conditions, the film is stoichiometric, the critical field is 4 MV/cm and the resistivity is 6×10¹⁵ cm. The interface state density (N _ss) on InP is deduced from Terman analysis. The annealing conditions and the surface cleaning of InP have been optimized in order to reduce the N _ss which is, for our best conditions, as low as 2×10¹¹ eV^–1 cm^–2.     

Laser deposition of amorphous diamond films from liquid aromatic hydrocarbons

6 H₅CH₃, C₆H₆, and C₆H₅CH(CH₃)₂) to pulsed visible laser radiation of a copper vapor laser (λ=510.6 nm). The X-ray Auger electron spectroscopy (XAES), reflection high energy electron diffraction (RHEED), and Raman analysis are employed to characterize the deposited films. The sp³ fraction in deposited films amounts to 60–70% and depends on the precursor. The average film thickness on a glass substrate is about 100 nm. The films show excellent adherence, are transparent in the visible and have microhardness of 50–70 GPa, as measured by nanoindentor. Received: 28 September 1998 / Accepted: 13 January 1999     

Structural and transport properties of cubic spinel ZnCo2O4 thin films grown by reactive magnetron sputtering

We report on the growth of cubic spinel ZnCo₂O₄ thin films by reactive magnetron sputtering and bipolarity of their conduction type by tuning of oxygen partial pressure ratio in the sputtering gas mixture. Crystal structure of zinc cobalt oxide films sputtered in an oxygen partial pressure ratio of 90% was found to change from wurtzite Zn_1−xCo_xO to spinel ZnCo₂O₄ with an increase of the sputtering power ratio between the Co and Zn metal targets, D_Co/D_Zn, from 0.1 to 2.2. For a fixed D_Co/D_Zn of 2.0 yielding single-phase spinel ZnCo₂O₄ films, the conduction type was found to be dependent on the oxygen partial pressure ratio: n-type and p-type for the oxygen partial pressure ratio below ∼70% and above ∼85%, respectively. The electron and hole concentrations for the ZnCo₂O₄ films at 300 K were as high as 1.37×10²⁰ and 2.81×10²⁰ cm⁻³, respectively, with a mobility of more than 0.2 cm²/V s and a conductivity of more than 1.8 S cm⁻¹.     

Evidence of very strong inter-epitaxial-layer diffusion in Zn-doped GaInPAs/InP structures

Zn-doped InP and GaInPAs layers were grown by OrganoMetallic Vapor-Phase Epitaxy (OMVPE). The epitaxial films consist of a primary GaInPAs/InP epitaxial layer and a secondary InP/GaInAs epitaxial layer. We present evidence that the redistribution of Zn acceptors in the primary epitaxial layer is strongly influenced by the Zn doping concentration in the secondary epitaxial layer. Rapid redistribution of Zn acceptors in the primary epitaxial layer occurs if the Zn doping concentration in the secondary epitaxial layer exceeds a critical concentration ofN _Zn3×10¹⁸cm^–3. The influence of the growth temperature on this effect is also presented.     

Effect of CeO2 buffer layer thickness on the structures and properties of YBCO coated conductors

Biaxially textured YBa₂Cu₃O_7−x (YBCO) films were grown on inclined-substrate-deposited (ISD) MgO-textured metal substrates by pulsed laser deposition. CeO₂ was deposited as a buffer layer prior to YBCO growth. CeO₂ layers of different thickness were prepared to evaluate the thickness dependence of the YBCO films. The biaxial alignment features of the films were examined by X-ray diffraction 2θ-scans, pole-figure, ?-scans and rocking curves of Ω angles. The significant influence of the CeO₂ thickness on the structure and properties of the YBCO films were demonstrated and the optimal thickness was found to be about 10 nm. High values of T_c = 91 K and J_c = 5.5 × 10⁵ A/cm² were obtained on YBCO films with optimal CeO₂ thickness at 77 K in zero field. The possible mechanisms responsible for the dependence of the structure and the properties of the YBCO films on the thickness of the CeO₂ buffer layers are discussed.     

Transparent conducting antimony-doped tin oxide films deposited on flexible substrates by r.f. magnetron-sputtering

Transparent conducting antimony-doped tin oxide (SnO₂:Sb) films were deposited on organic substrates by r.f. magnetron-sputtering. Polycrystalline films with a resistivity of ≈ 6.5×10^-3 Ω cm, a carrier concentration of≈ 1.2×10²⁰ cm^-3 and a Hall mobility of ≈ 9.7 cm² v^-1 s^-1 were obtained. The average transmittance of these films reached 85% in the wavelength range of the visible spectrum. Received: 20 April 2001 / Accepted: 23 July 2001 / Published online: 17 October 2001     

Development of conductive transparent indium tin oxide (ITO) thin films deposited by direct current (DC) magnetron sputtering for photon-STM applications

Highly conductive and transparent indium tin oxide (ITO) thin films, each with a thickness of 100 nm, were deposited on glass and Si(100) by direct current (DC) magnetron sputtering under an argon (Ar) atmosphere using an ITO target composed of 95% indium oxide and 5% tin oxide for photon-STM use. X-ray diffraction, STM observations, resistivity and transmission measurements were carried out to study the formation of the films at substrate temperatures between 40 and 400 °C and the effects of thermal annealing in air between 200 and 400 °C for between1 and 5 h. The film properties were highly dependent on deposition conditions and on post-deposition film treatment. The films deposited under an Ar atmosphere pressure of ∼1.7×10^-3 Torr by DC power sputtering (100 W) at substrate temperatures between 40 and 400 °C exhibited resistivities in the range 3.0–5.7×10^-5 Ω m and transmissions in the range 71–79%. After deposition and annealing in air at 300 °C for 1 h, the films showed resistivities in the range 2.9–4.0×10^-5 Ω m and transmissions in the range 78–81%. Resistivity and transmission measurements showed that in order to improve conductive and transparent properties, 2 h annealing in air at 300 °C was necessary. X-ray diffraction data supported the experimental measurements of resistivity and transmission on the studies of annealing time. The surface roughness and film uniformity improve with increasing substrate temperature. STM observations found the ITO films deposited at a substrate temperature of 325 °C, and up to 400 °C, had domains with crystalline structures. After deposition and annealing in air at 300 °C for 1 h the films still exhibited similar domains. However, after deposition at substrate temperatures from 40 °C to 300 °C, and annealing in air at 300 °C for 1 h, the films were shown to be amorphous. More importantly, the STM studies found that the ITO film surfaces were most likely to break after deposition at a substrate temperature of 325 °C and annealing in air at 300 °C for 2 or 3 h. Such findings give some inspiration to us in interpreting the effects of annealing on the improvement of conductive and transparent properties and on the transition of phases. In addition, correlations between the conductive/transparent properties and the phase transition, the annealing time and the phase transition, and the conductive/transparent properties and the annealing time have been investigated. Received: 10 July 2000 / Accepted: 27 October 2000 / Published online: 9 February 2001     

Low energy Ar-ion bombardment effects on the CeO2 surface

The structure and electronic properties of epitaxial grown CeO₂(1 1 1) thin films before and after Ar⁺ bombardment have been comprehensively studied with synchrotron radiation photoemission spectroscopy (SRPES). Ar⁺ bombardment of the surface causes a new emission appearing at 1.6 eV above the Fermi edge which is related to the localized Ce 4f¹ orbital in the reduced oxidation state Ce³⁺. Under the condition of the energy of Ar ions being 1 keV and a constant current density of 0.5 μA/cm², the intensity of the reduced state Ce³⁺ increases with increasing time of sputtering and reaches a constant value after 15 min sputtering, which corresponds to the surface being exposed to 2.8 × 10¹⁵ ions/cm². The reduction of CeO₂ is attributed to a preferential sputtering of oxygen from the surface. As a result, Ar⁺ bombardment leads to a gradual buildup of an, approximately 0.69 nm thick, sputtering altered layer. Our studies have demonstrated that Ar⁺ bombardment is an effective method for reducing CeO₂ to CeO_2−x and the degree of the reduction is related to the energy and amount of Ar ions been exposed to the CeO₂ surface.     

Production and characterization of Nd,Cr:GSGG thin films on Si(001) grown by pulsed laser ablation

Nd,Cr:Gd₃Sc₂Ga₃O₁₂ (GSGG) thin films have been produced for the first time. They were grown on Si(001) substrates at 650 °C by pulsed laser ablation at 248 nm of a crystalline Nd,Cr:GSGG target rod. The laser plume was analyzed using time-of-flight quadrupole mass spectroscopy, and consisted of elemental and metal oxide fragments with kinetic energies typically in the range 10 to 40 eV, though extending up to 100 eV. Although films deposited in vacuum using laser fluences of 0.8±0.1 J cm⁻² reproduced the Nd,Cr:GSGG bulk stoichiometry, those deposited using fluences above ≈3 J cm⁻² resulted in noncongruent material transfer and were deficient in Ga and Cr. Attempts to grow films using synchronized oxygen or oxygen/argon pulses yielded mixed oxide phases. Under optimal growth conditions, the films were heteroepitaxial, with GSGG(001)[100]∥Si(001)[100], and exhibited Volmer–Weber-type growth. Room-temperature emission spectra of the films suggest efficient non-radiative energy transfer between Cr³⁺ and Nd³⁺ ions, similar to that of the bulk crystal. Received: 1 October 1999 / Accepted: 15 October 1999 / Published online: 23 February 2000     

Properties of NiO thin films deposited by chemical spray pyrolysis using different precursor solutions

NiO thin films have been deposited by chemical spray pyrolysis using a perfume atomizer to grow the aerosol. The influence of the precursor, nickel chloride hexahydrate (NiCl₂·6H₂O), nickel nitrate hexahydrate (Ni(NO₃)₂·6H₂O), nickel hydroxide hexahydrate (Ni(OH)₂·6H₂O), nickel sulfate tetrahydrate (NiSO₄·4H₂O), on the thin films properties has been studied. In the experimental conditions used (substrate temperature 350 °C, precursor concentration 0.2-0.3 M, etc.), pure NiO thin films crystallized in the cubic phase can be achieved only with NiCl₂ and Ni(NO₃)₂ precursors. These films have been post-annealed at 425 °C for 3 h either in room atmosphere or under vacuum. If all the films are p-type, it is shown that the NiO films conductivity and optical transmittance depend on annealing process. The properties of the NiO thin films annealed under room atmosphere are not significantly modified, which is attributed to the fact that the temperature and the environment of this annealing is not very different from the experimental conditions during spray deposition. The annealing under vacuum is more efficient. This annealing being proceeded in a vacuum no better than 10⁻² Pa, it is supposed that the modifications of the NiO thin film properties, mainly the conductivity and optical transmission, are related to some interaction between residual oxygen and the films.     

Characterization of ablation plumes and carbon nitride films produced by reactive pulsed laser deposition in the presence of a magnetic field

x ) films in a nitrogen atmosphere within the range 5×10^-4–4×10^-1 Torr. In the presence of a magnetic field, the emission intensities of N₂ (second positive system) and CN species in the graphite ablation plumes were altered significantly, depending on the pressure of the N₂ environment. Corresponding to an intense CN emission, a magnetic field-induced enhancement of N incorporation – for example, up to 37% at an N₂ pressure of 300 mTorr – and the formation of sp³ tetrahedral CN bonding were both observed in the films. This suggests that the arrival of CN species at the substrate surface with kinetic energies is important for film deposition. Received: 27 August 1997/Accepted: 8 September 1997     

YBa2Cu3O7−δ /CeO2 heterostructures on sapphire R-plane

(001)YBa₂Cu₃O_7−δ epitaxial films were prepared by laser ablation on surface. A thin (001)CeO₂ or (111)CeO₂ buffer layer was deposited between the substrate and the superconductor film to reduce their chemical interaction. In the initial stages of CeO₂ buffer formation, its orientation depended strongly on the intensity of cerium ion interaction with oxygen. Epitaxial growth of (001)YBa₂Cu₃O_7−δ films was achieved both on and . The T _c temperature of epitaxial (001)YBa₂Cu₃O_7−δ films was within 88–90 K, and the current J _c at 77 K was in excess of 10⁶ A/cm⁻². Fiz. Tverd. Tela (St. Petersburg) 40, 205–208 (February 1998)     

Optical and IR studies on r.f. magnetron sputtered ultra-thin MoO3 films

Ultra-thin MoO₃ films were deposited onto glass and Si substrates by r.f. magnetron sputtering. The optical and IR properties of the films were studied in the range of 250 to 1000 nm and 400 to 1500 cm⁻¹, respectively. The optical transmission spectra show a significant shift in absorption edge. The energy gap of the films deposited at 373 K and 0.1 mbar was found to be 3.93 eV, and it decreases with increasing substrate temperature and decreasing sputtering pressure. The IR transmittance spectra shows strong modes of vibrations of Mo=O and Mo–O–Mo units of MoO₃ molecule. A significant change in energy gap and a shift in frequency of IR modes were observed in ultra-thin MoO₃ films.     

Defect reduction and surface passivation of SiO2/Si by heat treatment with high-pressure H2O vapor

Heat treatment with high-pressure H₂O vapor was applied to improve interface properties of SiO₂/Si and passivate the silicon surface. Heat treatment at 180–420 °C with high-pressure H₂O vapor changed SiO_x films, 150 nm thick formed at room temperature by thermal evaporation in vacuum, into SiO₂ films with a Si-O-Si bonding network similar to that of thermally grown SiO₂ films. Heat treatment at 130 °C with 2.8×10⁵ Pa H₂O for 3 h reduced the recombination velocity for the electron minority carriers from 405 cm/s (as-fabricated 150-nm-thick SiO_x/Si) to 5 cm/s. Field-effect passivation was demonstrated by an additional deposition of defective SiO_x films on the SiO₂ films formed by heat treatment at 340 °C with high-pressure H₂O vapor. The SiO_x deposition reduced the recombination velocity from 100 cm/s to 48 cm/s. Received: 1 March 1999 / Accepted: 28 March 1999 / Published online: 24 June 1999     

Characterization of high-quality MBE-grown GaN films on intermediate-temperature buffer layers

High-quality GaN thin films are grown by rf-plasma assisted molecular beam epitaxy. The quality of the GaN epitaxial layer is significantly improved by using an intermediate-temperature GaN buffer layer (ITBL) in addition to a conventional 20-nm-thick low-temperature buffer layer. The GaN epitaxial layers demonstrate systematic improvements in the electron mobility increasing from 82 cm² V^-1 s^-1, for films grown with just the low-temperature buffer layer, to about 380 cm² V^-1 s^-1 for films grown with an ITBL of thickness 800 nm. The photoluminescence also indicates systematic improvements in the intensity and the full-width-half-maximum with the use of ITBL. Photoreflectance spectra are measured from the GaN films. Detailed analyses of the excitonic transition energy demonstrate that the residual strain relaxes rapidly with the use of ITBL, which is attributed to the observed improvements in the mobility and the PL spectra. Received: 30 November 2000 / Accepted: 4 December 2000 / Published online: 9 February 2001