High frequency ultrasound as a selective advanced oxidation process to remove penicillinic antibiotics and eliminate its antimicrobial activity from water

This work studies the sonochemical degradation of a penicillinic antibiotic (oxacillin) in simulated pharmaceutical wastewater. High frequency ultrasound was applied to water containing the antibiotic combined with mannitol or calcium carbonate. In the presence of additives, oxacillin was efficiently removed through sonochemical action. For comparative purposes, the photo-Fenton, TiO₂ photocatalysis and electrochemical oxidation processes were also tested. Therefore, the evolution of the antibiotic and its associated antimicrobial activity (AA) were monitored. A high inhibition was found for the other three oxidation processes in the elimination of the antimicrobial activity caused by the additives; while for the ultrasonic treatment, a negligible effect was observed. The sonochemical process was able to completely degrade the antibiotic, generating solutions without AA. In fact, the elimination of antimicrobial activity showed an excellent performance adjusted to exponential kinetic-type decay. The main sonogenerated organic by-products were determined by means of HPLC-MS. Four intermediaries were identified and they have modified the penicillinic structure, which is the moiety responsible for the antimicrobial activity. Additionally, the possible oxacillin sonodegradation mechanism was proposed based on the evolution of the by-products and their chemical structure. Furthermore, the high-frequency ultrasound action over 120 min readily removed oxacillin and eliminated its antimicrobial activity. However, the pollutant was not mineralized even after a long period of ultrasonic irradiation (360 min). Interestingly, the previously sonicated water containing oxacillin and both additives was completely mineralized using non-adapted microorganisms from a municipal wastewater treatment plant. These results show that the sonochemical treatment transformed the initial pollutant into substances that are biotreatable with a typical aerobic biological system.     

Inactivation of Escherichia coli and Streptococcus mutans by ultrasound at 500 kHz

This paper shows a systematic study of the 500 kHz frequency ultrasound efficiency on the microbial inactivation as a function of ultrasonic power delivered into the bacterial suspension. The inactivation of Escherichia coli IAM 12058, a Gram-negative bacterium and Streptococcus mutans JCM 5175, a Gram-positive bacterium is enhanced by increasing the ultrasonic power in the range of 1.7–12.4 W and the logarithm of survival ratio decreases linearly with irradiation time, except for E. coli sonicated with the highest power level. The rate constants were estimated in the linear region of the plots representing survival ratio logarithm vs. sonication time. A better understanding of the inactivation process at 500 kHz could be gained by suppressing the chemical effects with a radical scavenger. We find out that the rate constants increase with the ultrasonic power delivered into the solution and dramatically decrease by the addition of t-butanol as a radical scavenger to the bacterial suspension. For comparison, experiments were carried out at a low frequency level of 20 kHz. It was found out that for the same ultrasonic power delivered into the bacterial suspension, the inactivation was slightly enhanced at 500 kHz frequency. The examinations of bacterium performed with a TEM revealed lethal damages arising from the interaction of bacterial cells with the cavitational bubbles. A significant amount of empty cell envelopes as well as their cytoplasmatic content was detected. Thus, based on these new data, the mechanism of bacterial inactivation by ultrasounds at high frequency is discussed here.     

Sonophotocatalytic inactivation of E. coli using ZnO nanofluids and its mechanism

The present study evaluated inactivation efficiency of a sonophotocatalytic process using ZnO nanofluids including ultrasonic parameters such as power density, frequency and time. The result showed that inactivation efficiency was increased by 20% when ultrasonic irradiation was combined with photocatalytic process in the presence of natural light. Comparison of inactivation efficiency in photocatalytic, ultrasonic and sonocatalytic processes using Escherichia coli as a model bacteria identified that inactivation efficiencies are shown in the following order: ultrasonic irradiation < sonocatalysis < photocatalysis < sonophotocatalysis. Furthermore, inactivation mechanism of sonophotocatalysis was proposed. Studies of reactive oxygen species (ROS) and zinc ions (Zn²⁺) release evaluation revealed that ROS play a key role in bacterial inactivation rather than Zn²⁺. Permeability of outer membrane (OM) and inner membrane (IM) of E. coli bacterial cells were studied and exhibited that sonophotocatalysis increased the permeability of OM and IM significantly. The enhanced bacterial inactivation effect in sonophotocatalytic process contributed to acoustic cavitation, sonocatalysis of ZnO and sonoporation phenomenon.     

Ultrasound-intensified laccase production from Trametes versicolor

An efficient intermittent ultrasonic treatment strategy was developed to improve laccase production from Trametes versicolor mycelia cultures. The optimized strategy consisted of exposing 2-day-old mycelia cultures to 5-min ultrasonic treatments for two times with a 12-h interval at the fixed ultrasonic power and frequency (120 W, 40 kHz). After 5 days of culture, this strategy produced the highest extracellular laccase activity of 588.9 U/L among all treatments tested which was 1.8-fold greater than the control without ultrasound treatment. The ultrasonic treatment resulted in a higher pellet porosity that facilitated the mass transfer of nutrients and metabolites from the pellets to the surrounding liquid. Furthermore, the ultrasonic treatment induced the expression of the laccase gene (lcc), which correlated with a sharp increase in both extracellular and intracellular laccase activity. This is the first study to find positive effects of ultrasound on gene expression in fungal cells. These results provide a basis for understanding the stimulation of metabolite production and process intensification by ultrasonic treatment in filamentous fungal culture.     

Microbial biofilm modulation by ultrasound: Current concepts and controversies

Biofilm elimination is often necessary during antimicrobial therapy or industrial medical manufacturing decontamination. In this context, ultrasound treatment has been frequently described in the literature for its antibiofilm effectiveness, but at the same time, various authors have described ultrasound as a formidable enhancer of bacterial viability. This discrepancy has found no solution in the current literature for around 9 years; some works have shown that every time bacteria are exposed to an ultrasonic field, both destruction and stimulation phenomena co-exist. This co-existence proves to have different final effects based on various factors such as: ultrasound frequency and intensity, the bacterial species involved, the material used for ultrasound diffusion, the presence of cavitation effects and the forms of bacterial planktonic or biofilm.The aim of this work is to analyze current concepts regarding ultrasound effect on prokaryotic cells, and in particular ultrasound activity on bacterial biofilm.     

Effective ultrasound electrochemical degradation of methylene blue wastewater using a nanocoated electrode

A novel sonoelectrochemical catalytic oxidation-driven process using a nanocoated electrode to treat methylene blue (MB) wastewater was developed. The nano-scale (nanocoated) electrode generated more hydroxyl radicals than non-nano-scale (non-nanocoated) electrodes did. However, hydroxyl radicals were easily adsorbed by the nanomaterial and thus were not able to enter the solution. Supersonic waves were found to enhance the mass-transfer effect on the nanocoated electrode surface, resulting in rapid diffusion of the generated hydroxyl radicals into the solution. In solution, the hydroxyl radicals then reacted with organic pollutants in the presence of ultrasonic waves. The effect of the nanocoated electrode on the MB wastewater treatment process was enhanced by ultrasound when compared to the non-nanocoated electrode used under the same conditions. The synergy of the nanocoated electrode and ultrasonic waves towards MB degradation was then studied. The optimum operating conditions resulted in a 92% removal efficiency for TOC and consisted of a current of 600 mA, an ultrasound frequency of 45 kHz, and a supersonic power of 250 W. The mechanism of ultrasound enhancement of the nanocoated electrode activity with respect to MB treatment is discussed. The reaction intermediates of the sonoelectrochemical catalytic oxidation process were monitored, and degradation pathways were proposed. The sonoelectrochemical catalytic oxidation-driven process using nanocoated electrodes was found to be a very efficient method for the treatment of non-biodegradable wastewater.     

Medium-high frequency ultrasound and ozone based advanced oxidation for amoxicillin removal in water

In this study, treatment of an antibiotic compound amoxicillin by medium-high frequency ultrasonic irradiation and/or ozonation has been studied. Ultrasonic irradiation process was carried out in a batch reactor for aqueous amoxicillin solutions at three different frequencies (575, 861 and 1141 kHz). The applied ultrasonic power was 75 W and the diffused power was calculated as 14.6 W/L. The highest removal was achieved at 575 kHz ultrasonic frequency (>99%) with the highest pseudo first order reaction rate constant 0.04 min⁻¹ at pH 10 but the mineralization achieved was around 10%. Presence of alkalinity and humic acid species had negative effect on the removal efficiency (50% decrease). To improve the poor outcomes, ozonation had been applied with or without ultrasound. Ozone removed the amoxicillin at a rate 50 times faster than ultrasound. Moreover, due to the synergistic effect, coupling of ozone and ultrasound gave rise to rate constant of 2.5 min⁻¹ (625 times higher than ultrasound). In the processes where ozone was used, humic acid did not show any significant effect because the rate constant was so high that ozone has easily overcome the scavenging effects of natural water constituents. Furthermore, the intermediate compounds, after the incomplete oxidation mechanisms, has been analyzed to reveal the possible degradation pathways of amoxicillin through ultrasonic irradiation and ozonation applications. The outcomes of the intermediate compounds experiments and the toxicity was investigated to give a clear explanation about the safety of the resulting solution. The relevance of all the results concluded that hybrid advanced oxidation system was the best option for amoxicillin removal.     

High performance of ultrasonic-assisted synthesis of two spherical polymers for enantioselective catalysis

Chiral polymers have aroused great attention in among chiral supramolecular materials based on their features. Herein, for the first time, the synthesis of chiral polymeric composites (CMNPs/1,4-Zbtb & 1,3-Zbtb) have been reported with entrapment through three strategies: ultrasonic irradiation, solvothermal, and mechanical stirring. According to the obtained results, it is found that ultrasound-assisted synthesis can be considered as an inexpensive and efficient method than the others, from the point of view of energy and time consuming. In this strategy, encapsulation of chiral magnetic nanoparticles (CMNPs) by using tetrazole-based polymers (Zbtbs) happens, in-situly. These chiral sphere-like inorganic–organic polymers can be considered as core and shell composites with catalytic activity due to their acidic (semi unsaturated Zn: open metal sites) and basic (abundant basic nitrogens) centers. In these structures, the unprecedented chirality induction can happen from the core to shell by non-covalent interaction, easily. They could catalyze symmetric oxidation and asymmetric henry condensation to give chiral β-nitroalkanol. Circular dichroism and chiral gas chromatography were used to characterize the produced enantiomers. These chiral polymeric materials can be considered as unique acid-base bifunctional catalysts with efficient properties such as high stability, enantiomeric excess, enantioselectivity to the main product, and protecting from CMNPs leaching.     

Variation of dissolved organic nitrogen concentration during the ultrasonic pretreatment to Microcystis aeruginosa

Algae cells were the main sources of dissolved organic nitrogen (DON) in raw water with plenty of algae, and ultrasonic pretreatment was one of the algae-controlling methods through the damage of algae cells. However, the variation of DON concentration during the ultrasonic treatment process was not confirmed. Variation of DON concentration during the processes of low frequency ultrasound treatment of Microcystis aeruginosa was investigated. In addition, the effect of sonication on the metabolite concentration, algae cellar activity and the subsequent coagulation performance were discussed. The results showed that after a long duration of ultrasonic (60 s), nearly 90% of the algal cells were damaged and the maximum concentration of DON attained more than 3 mg/L. In order to control the leakage extent of DON, the sonication time should be less than 30 s with power intensity of more than 1.0 W/cm³. In the mean time, ultrasonic treatment could inhibit the reactivation and the proliferation of algal, keep the algae cell wall integrity and enhance coagulation effectively under the same condition. However, ultrasound frequency had little effect on DON at the frequency range used in this study (20–150 kHz).     

The effects and mechanism of phycocyanin removal from water by high-frequency ultrasound treatment

The effects and mechanism of phycocyanin removal from water by high-frequency ultrasound treatment were studied. The efficiency of sonication treatment in removing proteins derived from algal cells was investigated, and the factors influencing the process, including the effects of coagulation, were also studied. In addition, sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE), the three-dimensional fluorescence spectrum, and mass spectrum were used to illustrate the removal mechanism. The results indicated that phycocyanin can be degraded to the point where it is barely detectable in water samples after 180 min of high-frequency sonication. While the total nitrogen (TN) concentration remained consistent during the entire sonication process (240 min), about 78.9% of the dissolved organic nitrogen (DON) was oxidized into inorganic nitrogen. The sonication effect was greatly influenced by the ultrasound frequency, with 200 kHz having the highest removal performance due to the large production of hydroxyl (HO) radicals. Coagulation was adversely influenced by sonication in the first 60 min due to the cross-linking reaction between protein molecules caused by the sonication. The influence of sonication weakened with sonication time due to the further degradation of the proteins by ultrasound. The variation of the TN, DON, and inorganic nitrogen indicated that the main mechanism occurring during the high-frequency sonication of the phycocyanin was the direct oxidation of the radicals, which was totally different from of the mechanism occurring during ultrasound with low frequency.     

Effects of high intensity unltrasound on structural and physicochemical properties of myosin from silver carp

Myosin from silver carp was sonicated with varying power output (100, 150, 200 and 250 W) for 3, 6, 9, and 12 min. The changes in the structure and physicochemical properties of myosin were evaluated by dynamic light scattering, SDS-PAGE and some physicochemical indexes. The ultrasound treatments induced a significant conversion of myosin aggregates to smaller ones with a more uniform distribution, and obvious enhancement in solubility. The structure of myosin was also notably changed by sonication, with a decrease in Ca²⁺-ATPase activity and SH content, and an increase in surface hydrophobicity. Furthermore, SH groups were oxidized, leading to a decrease in reactive SH and total SH contents. SDS-PAGE analysis revealed that ultrasound could induce the degradation of myosin heavy chain and change the protein fraction of myosin. Collectively, the ultrasonic treatment of 100 W for 3 min showed slight influence on the SH content, S₀-ANS, and electrophoretic patterns, and the extent of changes in myosin structure and physicochemical properties tended to increase with ultrasonic power and time. The integrated data indicate that ultrasonic treatment can facilitate the improvement of the solubility and dispersion of myosin, but the choice of a suitable ultrasonic condition to avoid oxidation and degradation of myosin is very important.     

Inactivation of microorganisms by low-frequency high-power ultrasound: 1. Effect of growth phase and capsule properties of the bacteria

The aim of this study was to determine the effects of high-intensity low-frequency (20 kHz) ultrasound treatment on the viability of bacteria suspension. More specifically, we have investigated the relationship between the deactivation efficiency and the physical (size, hydrophobicity) and biological (gram-status, growth phase) properties of the microbes. Enterobacter aerogenes, Bacillus subtilis, Staphylococcus epidermidis, S. epidermidis SK and Staphylococcus pseudintermedius were chosen for this study owing to their varying physical and biological properties. The survival ratio of the bacteria suspension was measured as a function of the ultrasound power (up to 13 W) for a constant sonication time of 20 min. Transmission electron microscopy was used to evaluate the ultrasound-induced damages to the microbes. Ultrasound treatment resulted in lethal damage to E. aerogenes and B. subtilis (up to 4.5-log reduction), whereas Staphylococcus spp. were not affected noticeably. Further, E. aerogenes suspensions were more sensitive to ultrasonication in exponential growth phase than when they were in stationary phase. The results of this study demonstrate that the main reason for bacterial resistance to ultrasonic deactivation is due to the properties of the bacterial capsule. Microbes with a thicker and “soft” capsule are highly resistant to ultrasonic deactivation process.     

Degradation of 4-chloro 2-aminophenol using combined strategies based on ultrasound,photolysis and ozone

The present work investigates the degradation of 4-chloro 2-aminophenol (4C2AP), a highly toxic organic compound, using ultrasonic reactors and combination of ultrasound with photolysis and ozonation for the first time. Two types of ultrasonic reactors viz. ultrasonic horn and ultrasonic bath operating at frequency of 20 kHz and 36 kHz respectively have been used in the work. The effect of initial pH, temperature and power dissipation of the ultrasonic horn on the degradation rate has been investigated. The established optimum parameters of initial pH as 6 (natural pH of the aqueous solution) and temperature as 30 ± 2 °C were then used in the degradation studies using the combined approaches. Kinetic study revealed that degradation of 4C2AP followed first order kinetics for all the treatment approaches investigated in the present work. It has been established that US + UV + O₃ combined process was the most promising method giving maximum degradation of 4C2AP in both ultrasonic horn (complete removal) and bath (89.9%) with synergistic index as 1.98 and 1.29 respectively. The cavitational yield of ultrasonic bath was found to be eighteen times higher as compared to ultrasonic horn implying that configurations with higher overall areas of transducers would be better selection for large scale treatment. Overall, the work has clearly demonstrated that combined approaches could synergistically remove the toxic pollutant (4C2AP).     

Ultrasound technology for food fermentation applications

Fermentation processes involve the participation of enzymes and organic catalysts, generated by range of microorganisms to produce chemical transformations. Ultrasound can be used in such processes to either monitor the progress of fermentation or to influence its progress. High frequency ultrasound (>2 MHz) has been extensively reported as a tool for the measurement of the changes in chemical composition during fermentation providing real time information on reaction progress. Low frequency ultrasound (20–50 kHz) can influence the course of fermentation by improving mass transfer and cell permeability leading to improved process efficiency and production rates. It can also be used to eliminate micro-organisms which might otherwise hinder the process. This review summarises key applications of high and low frequency ultrasound in food fermentation applications.     

Sonolysis of levodopa and paracetamol in aqueous solutions

Pharmaceutical products are often present in wastewater treatment effluents, rivers, lakes and, more rarely, in groundwater. The advanced oxidation methods, like ultrasound, find a promising future in the area of wastewater treatment. The aim of this paper is to evaluate the influence of several parameters of the ultrasound process on the degradation of paracetamol, a widely used non-steroidal anti-inflammatory recalcitrant drug found in water and levodopa, the most frequently prescribed drug for the treatment of Parkinson disease. Experiments were carried out at 574, 860 and 1134 kHz of ultrasonic frequency with horn-type sonicator and actual power values of 9, 17, 22 and 32 W at 20 °C. Initial concentrations of 25, 50, 100 and 150 mg L^?1 of both products were used. Treatment efficiency was assessed following changes in pharmaceuticals concentration and chemical oxygen demand.The sonochemical degradation of both products follows a pseudo-first-order reaction kinetics. Complete removal of pharmaceuticals was achieved in some cases but some dissolved organic carbon remains in solution showing that long lived intermediates were recalcitrant to ultrasound irradiation. Pollutants conversion and COD removal were found to decrease with increasing the initial solute concentration and decreasing power. The best results were obtained with 574 kHz frequency. Investigations using 1-butanol as radical scavenger and H₂O₂ as promoter revealed that pollutants degradation proceeds principally through radical reactions, although some differences were observed between both molecules. Addition of H₂O₂ had a positive effect on degradation rate, but the optimum concentration of hydrogen peroxide depends on the pollutant.     

Role of H2O2 in the fluctuating patterns of COD (chemical oxygen demand) during the treatment of palm oil mill effluent (POME) using pilot scale triple frequency ultrasound cavitation reactor

Palm oil mill effluent (POME) is a highly contaminating wastewater due to its high chemical oxygen demand (COD) and biochemical oxygen demand (BOD). Conventional treatment methods require longer residence time (10–15 days) and higher operating cost. Owing to this, finding a suitable and efficient method for the treatment of POME is crucial. In this investigation, ultrasound cavitation technology has been used as an alternative technique to treat POME. Cavitation is the phenomenon of formation, growth and collapse of bubbles in a liquid. The end process of collapse leads to intense conditions of temperature and pressure and shock waves which assist various physical and chemical transformations. Two different ultrasound systems i.e. ultrasonic bath (37 kHz) and a hexagonal triple frequency ultrasonic reactor (28, 40 and 70 kHz) of 15 L have been used. The results showed a fluctuating COD pattern (in between 45,000 and 60,000 mg/L) while using ultrasound bath alone, whereas a non-fluctuating COD pattern with a final COD of 27,000 mg/L was achieved when hydrogen peroxide was introduced. Similarly for the triple frequency ultrasound reactor, coupling all the three frequencies resulted into a final COD of 41,300 mg/L compared to any other individual or combination of two frequencies. With the possibility of larger and continuous ultrasonic cavitational reactors, it is believed that this could be a promising and a fruitful green process engineering technique for the treatment of POME.     

Effects of power ultrasound on oxidation and structure of beef proteins during curing processing

The aim of this study was to evaluate the effects of power ultrasound intensity (PUS, 2.39, 6.23, 11.32 and 20.96 W cm⁻²) and treatment time (30, 60, 90 and 120 min) on the oxidation and structure of beef proteins during the brining procedure with 6% NaCl concentration. The investigation was conducted with an ultrasonic generator with the frequency of 20 kHz and fresh beef at 48 h after slaughter. Analysis of TBARS (Thiobarbituric acid reactive substances) contents showed that PUS treatment significantly increased the extent of lipid oxidation compared to static brining (P < 0.05). As indicators of protein oxidation, the carbonyl contents were significantly affected by PUS (P < 0.05). SDS–PAGE analysis showed that PUS treatment increased protein aggregation through disulfide cross-linking, indicated by the decreasing content of total sulfhydryl groups which would contribute to protein oxidation. In addition, changes in protein structure after PUS treatment are suggested by the increases in free sulfhydryl residues and protein surface hydrophobicity. Fourier transformed infrared spectroscopy (FTIR) provided further information about the changes in protein secondary structures with increases in β-sheet and decreases in α-helix contents after PUS processing. These results indicate that PUS leads to changes in structures and oxidation of beef proteins caused by mechanical effects of cavitation and the resultant generation of free radicals.     

Preparation of 1,3-bis(allyloxy)benzene under a new multi-site phase-transfer catalyst combined with ultrasonication – A kinetic study

In the present work, kinetics of synthesis of 1,3-bis(allyloxy)benzene was successfully carried out by O-allylation of resorcinol with allyl bromide using aqueous potassium hydroxide and catalyzed by a new multi-site phase-transfer catalyst viz., 1,3,5,7-tetrabenzylhexamethylenetetraammonium tetrachloride, MPTC under ultrasonic (40 kHz, 300 W) assisted organic solvent condition. The pseudo first-order kinetic equation was applied to describe the overall reaction. Under ultrasound irradiation (40 kHz, 300 W) in a batch reactor, it shows that the overall reaction rate can be greatly enhanced to seven fold faster with ultrasound irradiation than without ultrasound. The present study provides a method to synthesize ethers by ultrasound assisted liquid–liquid phase-transfer catalysis condition.     

Ultrasound assisted acid catalyzed lactose hydrolysis: Understanding into effect of operating parameters and scale up studies

The current work deals with the value addition of lactose by transforming into hydrolyzed lactose syrup containing glucose and galactose in major proportion using the novel approach of ultrasound assisted acid catalyzed lactose hydrolysis. The hydrolysis of lactose was performed in ultrasonic bath (33 kHz) at 50% duty cycle at different temperatures as 65 °C and 70 °C and two different hydrochloric acid (HCl) concentrations as 2.5 N and 3 N. It was observed that acid concentration, temperature and ultrasonic treatment were the major factors in deciding the time required to achieve ∼90% hydrolysis. The ultrasonic assisted approach resulted in reduction in the reaction time and the extent of intensification was established to be dependent on the temperature, acid concentration and time of ultrasonic exposure. It was observed that the maximum process intensification obtained by introduction of ultrasound in the lactose hydrolysis process performed at 70 °C and 3 N HCl was reduction in the required time for ∼90% hydrolysis from 4 h (without the presence of ultrasound) to 3 h. The scale-up study was also performed using an ultrasonic bath with longitudinal horn (36 kHz as operating frequency) at 50% duty cycle, optimized temperature of 70 °C and acid concentration of 3 N. It was observed that the reaction was faster in the presence of ultrasound and stirring by axial impeller at rpm of 225 ± 25. The time required to complete ∼90% of hydrolysis remained almost the same as observed for small scale study on ultrasonic bath (33 kHz) at 50% duty cycle. The use of recovered lactose from whey samples instead of pure lactose did not result in any significant changes in the progress of hydrolysis, confirming the efficacy of the selected approach. Overall, the work has presented a novel ultrasound assisted approach for intensified lactose hydrolysis.     

Effects of ultrasound and temperature on copper electro reduction in Deep Eutectic Solvents (DES)

This paper concerns a preliminary study for a new copper recovery process from ionic solvent. The aim of this work is to study the reduction of copper in Deep Eutectic Solvent (choline chloride–ethylene glycol) and to compare the influence of temperature and the ultrasound effects on kinetic parameters. Solutions were prepared by dissolution of chloride copper salt CuCl₂ (to obtain Copper in oxidation degree II) or CuCl (to obtain Copper in oxidation degree I) and by leaching metallic copper directly in DES. The spectrophotometry UV–visible analysis of the leached solution showed that the copper soluble form obtained is at oxidation degree I (Copper I). Both cyclic voltammetry and linear voltammetry were performed in the three solutions at three temperatures (25, 50 and 80 °C) and under ultrasonic conditions (F = 20 kHz, PT = 5.8 W) to calculate the mass transfer diffusion coefficient kD and the standard rate coefficient k°. These parameters are used to determine that copper reduction is carried out via a mixed kinetic-diffusion control process. Temperature and ultrasound have the same effect on mass transfer for reduction of Cu^II/Cu^I. On the other hand, temperature is more beneficial than ultrasound for mass transfer of Cu^I/Cu. Standard rate constant improvement due to temperature increase is of the same order as that obtained with ultrasound. But, by combining higher temperature and ultrasound (F = 20 kHz, PT = 5.6 W at 50 °C), reduction limiting current is increased by a factor of 10 compared to initial conditions (T = 25 °C, silent), because ultrasonic stirring is more efficient in lower viscosity fluid. These values can be considered as key-parameters in the design of copper recovery in global processes using ultrasound.