Ultrasonic-assisted electrodeposition of Ni/diamond composite coatings and its structure and electrochemical properties

Ni/diamond composite coatings have been synthesized by ultrasonic-assisted electrodeposition in a Ni electroplating bath containing diamond nanoparticles. The influences of current density and ultrasonic agitation on the coating composition, morphology, topography, phase structure, and electrochemical characteristics of the electrodeposits were evaluated. Ultrasonic agitation was provided using an external ultrasonic bath at a frequency of 40 kHz and acoustic power of 300 W. Coating samples were also prepared under magnetic stirring for comparison with the ultrasonic-assisted deposits. This work reveals that the diamonds have been incorporated and evenly distributed in the composites. The coatings exhibit dense, granular like morphology with pyramid-like grains. As current density increases, the diamond amount of ultrasonic-assisted electrodeposits first increased to maximum of 11.4 wt% at 3 A dm⁻² and then decreases to 9.9 wt% at 5 A dm⁻², and the RTC of the preferred orientation (2 0 0) plane increases from 76.3% up to 93.4%. The crystallite size was 60–80 nm and the R_a of the magnetic and ultrasonic agitations were 116 nm, 110 nm, respectively. The maximum R_p of 39.9, 50.3 kΩ cm² was obtained at 4 A dm⁻² when respectively immersed 30 min and 7 days, illustrating the best corrosion resistance of the coatings of 4 A dm⁻². The effects of mechanical and ultrasonic agitations on the mechanism of the co-electrodeposition process were both proposed. The incorporation of diamond particles enhances the hardness and wear-resisting property of the electrodeposits. The ultrasonic-assisted electrodeposited Ni/diamond coating has better corrosion resistance than that prepared under mechanical stirring conditions.     

Facile synthesis and electrochemical properties of a novel Ni-B/TiC composite coating via ultrasonic-assisted electrodeposition

A novel Ni-B/TiC composite coating was synthesized by ultrasonic-assisted direct current electrodeposition. Ultrasonic technology was adopted to prevent the agglomeration of nanoparticle, improve the structure and corrosion resistance, using an ultrasonic bath at frequency 40 KHz and acoustic power 300 W. The influences of current density and deposition time on its structure and electrochemical behaviors were studied. Under ultrasonic dispersion, the composite coatings are smooth, compact with protrusion structure sparsely distributed on it. The average roughness (S_a) was about 13.6–26.1 nm. The crystallite size is 10–21 nm. The preferred orientation is Ni (1 1 1) texture. EIS results indicated that the corrosion resistance was greatly improved by ultrasonic-assisted method. The corrosion mechanism is consistent with one-time constant EEC model of R_s(CPE_dlR_ct). With the increase of immersion time, the R_ct of the composite coating often first increased and then decreased. Under ultrasonic, current density 2 A dm⁻² and deposition time 20 min were the appropriate parameters for the optimal corrosion resistance and excellent long-term electrochemical stability in 3.5 wt% NaCl corrosive solution. This coating shows good application prospect for corrosion protection in aggressive environment.     

Enhancement of catalytic activity in NH3-SCR reaction by promoting dispersibility of CuCe/TiO2-ZrO2 with ultrasonic treatment

A series of CuCe-modified TiO₂-ZrO₂ catalysts synthesized by stepwise impregnation method and ultrasonic-assisted impregnation method were investigated to research the removal of NO in the simulated flue gas. Results showed that the CuCe/TiO₂-ZrO₂ catalyst prepared by ultrasonic-assisted impregnation method exhibited the superior NO conversion, in which higher than 85% NO was degraded at the temperature range of 250–400 °C and the highest NO conversion of 94% at 350 °C. It proves that ultrasonic treatment can markedly improve the performance of catalysts. The effect of ultrasonic enhancement on CuCe/TiO₂-ZrO₂ was comprehensively studied through being characterized by physicochemical characterization. Results reveal that the ultrasonic cavitation effect improves the distribution of active species and the synergistic interaction between Cu with Ce components (Cu⁺ + Ce⁴⁺ ↔ Cu²⁺ + Ce³⁺) on the catalysts significantly, thus resulting in better dispersibility as well as a higher ratio of Cu²⁺ and Ce³⁺ of the catalysts. Moreover, it was found that the CuCe/TiO₂-ZrO₂ catalyst prepared by the ultrasonic-assisted impregnation method represented a higher degree of ultrafine metal particles and evenness. The above results were described with the generalized dimension and singularity spectra in multifractal analysis and validated by the comparative test. Therefore, it can be concluded that ultrasonic treatment facilitates the particle size and distribution of active sites on the catalysts.     

A comparison of the magnetic and microwave absorption properties of Mn–Sn–Ti substituted strontium ferrite with and without multi-walled carbon nanotube

In this work, a comparison of magnetic and microwave properties between Mn–Sn–Ti substituted SrM ferrite and nanocomposite of Mn–Sn–Ti substituted SrM ferrite–20% volume multi-walled carbon nanotube (MWCNT) has been done. Phase characterization and crystal structure of the synthesized nanoparticles were tested by X-ray diffraction (XRD). Field emission scanning electron microscopy (FESEM), Fourier transform infrared spectrometry (FTIR) analysis approved that the SrFe_12−x(MnSn_0.5Ti_0.5)_x/2O₁₉ nanoparticles were attached on the external surfaces of the MWCNTs. Mӧssbauer spectroscopy (M_S) showed the occupancy by non-magnetic Mn²⁺–Sn⁴⁺–Ti⁴⁺ cations into the hexagonal lattice structure. Magnetic properties were evaluated by a vibrating sample magnetometer (VSM). The results also indicated that saturation magnetization and coercivity were decreased with an increase in x content and also MWCNTs addition. Microwave absorption properties were investigated by a vector network analyzer (VNA). It was found that with an addition of 20 volume percentage of MWCNTs, the saturation magnetization coupled with coercivity decrease, but reflection loss (RL) increase broadly. Also it proved that with an increase in the thickness of absorption the frequency band shifts from K_u (12–18 GHz) to X (8–12 GHz) band.     

Synthesis and characterization of nitrogen-doped TiO2 coatings on reduced graphene oxide for enhancing the visible light photocatalytic activity

Nitrogen-doped TiO₂ coatings on reduced graphene oxide were prepared via a sonochemical synthesis and hydrothermal process. The nanocomposites showed improved photocatalytic activity due to their large specific surface areas (185–447 m²/g), the presence of TiO₂ in the anatase phase, and a quenched photoluminescence peak. In particular, GN3-TiO₂ (nitrogen-doped TiO₂ coatings on rGO with 3 ml of titanium (IV) isopropoxide) exhibited the best photocatalytic efficiency and degradation rate among the materials prepared. With nitrogen-doped on the reduced graphene oxide surface, the photocatalytic activity is enhanced approximately 17.8 times compared to that of the pristine TiO₂. The dramatic enhancement of activity is attributed to the nitrogen contents and rGO effectively promoting charge-separation efficiency and providing abundant catalytically active sites to enhance the reactivity. The composites also showed improved pollutant adsorption capacity, electron–hole pair lifetime, light absorption capability, and absorbance of visible light.     

Sonocatalytic degradation of an anthraquinone dye using TiO2-biochar nanocomposite

TiO₂-biochar (TiO₂-BC) nanocomposite was synthesized by sol-gel method. The characteristics of the prepared nanocomposite were examined using X-ray fluorescence, scanning electron microscopy, energy-dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy and N₂ adsorption-desorption analysis. The performance of synthesized TiO₂-BC nanocomposite as efficient sonocatalyst was studied for the degradation of Reactive Blue 69 (RB69). Sonocatalytic degradation of RB69 in the presence of TiO₂-BC nanocomposite could be explained by the mechanisms of hot spots and sonoluminescence. The optimized values for main operational parameters were determined as pH of 7, TiO₂-BC dosage of 1.5 g/L, RB69 initial concentration of 20 mg/L and ultrasonic power of 300 W. Furthermore, the effect of OH, h⁺ and O₂⁻ scavengers on the RB69 degradation efficiency was studied. Gas chromatography-mass spectroscopy analysis was used to identify intermediate compounds formed during the RB69 degradation. The results of repeated applications of TiO₂-BC in the sonocatalytic process verified its stability in long-term usage.     

Cyclic voltammetry study of electrodeposition of CuGaSe2 thin films on ITO-glass substrates

The electrodeposition mechanism of CuGaSe₂ (CGS) thin films on ITO substrates has been investigated using cyclic voltammetry technique. The cyclic voltammetric study was performed in unitary Cu, Ga and Se systems, binary Cu–Se, Ga–Se systems and ternary Cu–Ga–Se system. The electrodeposition metallic Ga from Ga unitary electrolytes is impossible due to its low reduction potential. No reduction peak was found for the reduction of Ga³⁺ to Ga in the cyclic voltammogram of unitary system. However, in the cyclic voltammogram of ternary Cu–Ga–Se system, reduction peak at −0.6 V was observed with addition of GaCl₃. Also, current density of the peak was increased with increasing concentration of GaCl₃. It is corresponded to the formation of gallium selenides and/or copper–gallium–selenium compounds. The contents of Ga in the films were significantly changed from −0.4 V to −0.6 V. SEM and XRD analysis also showed that surface morphology and crystalline phase of films were significantly changed with increasing Ga content.     

Influence of Cu doping on the microstructure,optical properties and photoluminescence features of Cd0.9Zn0.1S nanoparticles

Cd_0.9−xZn_0.1Cu_xS (0≤x≤0.06) nanoparticles were successfully synthesized by a conventional chemical co-precipitation method at room temperature. Crystalline phases and optical absorption of the nanoparticles have been studied by X-ray diffraction (XRD) and UV–visible spectrophotometer. XRD confirms the phase singularity of the synthesized material, which also confirmed the formation of Cd–Zn–Cu–S alloy nanocrystals rather than separate nucleation or phase formation. Elemental composition was examined by the energy dispersive X-ray analysis and the microstructure was examined by scanning electron microscope. The blue shift of absorption edge below Cu=2% is responsible for dominance of Cu⁺ while at higher Cu concentration dominated Cu²⁺, d–d transition may exist. It is suggested that the addition of third metal ion (Cu²⁺/Cu⁺) is an effective way to improve the optical property and stability of the Cd_0.9Zn_0.1S solid solutions. When Cu is introduced, stretching of Cd–Zn–Cu–S bond is shifted lower wave number side from 678 cm⁻¹ (Cu=0%) to 671 cm⁻¹ (Cu=6%) due to the presence of Cu in Cd–Zn–S lattice and also the size effect. The variation in blue band emission peak from 456 nm (∼2.72 eV) to 482 nm (∼2.58 eV) by Cu-doping is corresponding to the inter-band radiation combination of photo-generated electrons and holes. Intensity of red band emission centered at 656 nm significantly increased up to Cu=4%; beyond 4% it is decreased due to the quenching of Cu concentration.     

Effects of ultrasonic agitation and surfactant additive on surface roughness of Si (1 1 1) crystal plane in alkaline KOH solution

In the silicon wet etching process, the “pseudo-mask” formed by the hydrogen bubbles generated during the etching process is the reason causing high surface roughness and poor surface quality. Based upon the ultrasonic mechanical effect and wettability enhanced by isopropyl alcohol (IPA), ultrasonic agitation and IPA were used to improve surface quality of Si (1 1 1) crystal plane during silicon wet etching process. The surface roughness R_q is smaller than 15 nm when using ultrasonic agitation and R_q is smaller than 7 nm when using IPA. When the range of IPA concentration (mass fraction, wt%) is 5–20%, the ultrasonic frequency is 100 kHz and the ultrasound intensity is 30–50 W/L, the surface roughness R_q is smaller than 2 nm when combining ultrasonic agitation and IPA. The surface roughness R_q is equal to 1 nm when the mass fraction of IPA, ultrasound intensity and the ultrasonic frequency is 20%, 50 W and 100 kHz respectively. The experimental results indicated that the combination of ultrasonic agitation and IPA could obtain a lower surface roughness of Si (1 1 1) crystal plane in silicon wet etching process.     

Preparation and characterization of semiconductor GNR-CNT nanocomposite and its application in FET

So far, little is known about the experimental potential of graphene nanoribbon-carbon nanotube (GNR-CNT) heterostructure as a semiconductor nanocomposite. The present work examined the structural features, topography and electronic properties of GNR-CNT nanocomposite by using Raman spectroscopy, transmission electron microscopy, scanning tunneling microscopy and spectroscopy (STS). The homogenous semiconductor GNR-CNT nanocomposites were produced under optimized synthesis conditions. The narrow band gap was exhibited by optimization of the reduction step. The STS of the micro-scale surface of the nanocomposite shows local density of state in selected areas that represent the 0.08 eV band gap of a homogenous nanocomposite. The potential of the semiconductor nanocomposite was considered for application in stacked graphene nanoribbon-field effect transistors (SGNR-FETs). A simple method of device fabrication is proposed based on a semiconductor stacked GNR nanocomposite. The high hole mobility and rectifying effect of the p–n junction of the SGNR nanocomposite on TiO₂ are demonstrated. The optimal thickness for the back gate TiO₂ dielectric for the tested devices was 40 nm. This thickness decreased leakage current at the p–n junction of the SGNR/TiO₂ interface, which is promising heterojunction for optoelectronics. The thickness of gate dielectric and quantum capacitance of the gate was investigated at the low 40 nm thickness by calculating the mobility. In the proposed SGNR-FET, holes dominate electrical transport with a high mobility of about 1030 cm²/V s.     

Preparation and characterization of low density polystyrene/TiO2 core–shell particles for electronic paper application

In order to reduce the density mismatch between TiO₂ and the low dielectric medium and improve the dispersion stability of the electrophoretic particles in the low dielectric medium for electrophoretic display application, polystyrene/titanium dioxide (PS/TiO₂) core–shell particles were prepared via in-situ sol–gel method by depositing TiO₂ on the PS particle which was positively charged with 2-(methacryloyloxy)ehyl trimethylammonium chloride (DMC). The morphology and average particle size of PS/TiO₂ core–shell particles were observed by transmission electron microscopy (TEM), scanning electron microscope (SEM) and particle size analyzer. It was found that density of PS/TiO₂ core–shell particles were reduced obviously and the particles can suspend in the low dielectric medium of low density. The PS/TiO₂ core–shell particles can endure ultrasonic treatment because of the interaction between TiO₂ and PS. Zeta potential and electrophoretic mobility of the fabricated core–shell particles in a low dielectric medium with charge control agent was measured to be −44.3 mV and −6.07 × 10⁻⁶ cm²/Vs, respectively, which presents potential in electronic paper application.     

Preparation and photocatalytic degradation of erbium doped titanium dioxide nanorods

Photocatalytic degradation of methylene blue (MB) in water was examined using Er³⁺-doped TiO₂ (Er–TiO₂) nanorods prepared by a sol–gel derived electrospinning, calcination, and subsequent mechanical grinding. Different concentrations of Er dopant in the range of 0–1.0 mol% were synthesized to evaluate the effect of Er content on the photocatalytic activity of TiO₂. Among Er³⁺–TiO₂ catalysts, the 0.7 mol% Er³⁺–TiO₂ catalyst showed the highest MB degradation rate. The degradation kinetic constant (k) increased from 1.0 × 10^?3 min^?1 to 5.1 × 10^?3 min^?1 with the increase of Er³⁺ doping from 0 to 0.7 mol%, but decreased down to 2.1 × 10^?3 min^?1 when Er³⁺ content was 1.0 mol%. It can be concluded that the degradation of MB under UV radiation was more efficient with Er³⁺–TiO₂ catalyst than with pure TiO₂. The higher activity might be attributed to the transition of 4f electrons of Er³⁺ and red shifts of the optical absorption edge of TiO₂ by erbium ion doping.     

Influence of pH on the preparation of dispersed Ag–TiO<Subscript>2</Subscript> nanocomposite

In this paper, data concerning the effect of pH on the morphology of Ag–TiO₂ nanocomposite during photodeposition of Ag on TiO₂ nanoparticles is reported. TiO₂ nanoparticles prepared by sol–gel method were coated with Ag by photodeposition from an aqueous solution of AgNO₃ at various pH levels ranging from 1 to 10 in a titania sol, under UV light. The as-prepared nanocomposite particles were characterized by UV–vis absorption spectroscopy, transmission electron microscopy (TEM), X-ray diffraction (XRD), and N₂ adsorption/desorption method at liquid nitrogen temperature (−196 °C) from Brunauer–Emmett–Teller (BET) measurements. It is shown that at a Ag loading of 1.25 wt.% on TiO₂, a high-surface area nanocomposite morphology corresponding to an average of one Ag nanoparticle per titania nanoparticle was achieved. The diameter of the titania crystallites/particles were in the range of 10–20 nm while the size of Ag particles attached to the larger titania particles were 3 ± 1 nm as deduced from crystallite size by XRD and particle size by TEM. Ag recovery by photo harvesting from the solution was nearly 100%. TEM micrographs revealed that Ag-coated TiO₂ nanoparticles showed a sharp increase in the degree of agglomeration for nanocomposites prepared at basic pH values, with a corresponding sharp decrease in BET surface area especially at pH > 9. The BET surface area of the Ag–TiO₂ nanoparticles was nearly constant at around a value of 140 m² g⁻¹ at all pH from 1–8 with an anomalous maximum of 164 m² g⁻¹ when prepared from a sol at pH of 4, and a sharp decrease to 78 m² g⁻¹ at pH of 10.     

Bipolar resistive switching of solution processed TiO2–graphene oxide nanocomposite for nonvolatile memory applications

In this study, we report the observation of memory effect in TiO₂–GO nanocomposite films. Electrical properties of the prepared Al/TiO₂–GO composite/ITO devices have shown stable and reproducible bipolar resistive switching behavior. The TiO₂–GO composite films were prepared using solution method by spin coating technique. Observed results have shown that the inclusion of GO in the TiO₂ matrix have exhibited a significant role in the resistive switching mechanism. The device has exhibited an excellent memory characteristic with low operating voltages, good endurance up to 10⁵ cycles and long retention time more than 5×10³ s$5\times {10}^3\text{s}$.     

Surface characterization of the Zn-Ni-Al2O3 nanocomposite coating fabricated under ultrasound condition

Zn-Ni-Al₂O₃ nanocomposite coating, which was fabricated by eletrodeposition technique with the aid of ultrasound, was investigated by scanning electron microscopy (SEM), energy dispersive X-ray (EDX) analysis and X-ray photoelectron spectroscopy (XPS). The results reveal that 7.2 wt.% nano-alumina particles uniformly dispersed in the matrix of the composite coating. The XPS analyses demonstrate that the outermost layer of Zn-Ni-Al₂O₃ coating was composed of nano-alumina and Zn(OH)₂, while the transition layer between the outermost layer and the Zn-Ni matrix consisted of nano-alumina, metallic Zn, ZnO and metallic Ni. In order to investigate the influences of ultrasonic agitation and the incorporation of nano-alumina on the composition and surface structure of Zn-Ni matrix, the comparison studies of Zn-Ni-Al₂O₃ nanocomposite coating with Zn-Ni coatings fabricated with and without ultrasound were conducted. The results indicate that ultrasonic agitation resulted in a decrease of Ni content in the Zn-Ni matrix and an increase of the thickness of surface oxide layer; while the incorporation of nano-α-Al₂O₃ increased the Ni content in the Zn-Ni matrix.     

Stability of Zn–Ni–TiO<Subscript>2</Subscript> and Zn–TiO<Subscript>2</Subscript> nanocomposite coatings in near-neutral sulphate solutions

Zn–Ni–TiO₂ and Zn–TiO₂ nanocomposites were prepared by galvanostatic cathodic square wave deposition. X-ray diffraction analysis and scanning electron microscopy revealed that the occlusion of TiO₂ nanoparticles (spherical shaped with diameter between 19.5 and 24.2 nm) promotes the formation of the γ-Ni₅Zn₂₁ phase, changes the preferred crystallographic orientation of Zn from (101) and (102) planes to (002), and decreases the particle size of the metallic matrices. The stability of the nanocomposites immersed in near-neutral 0.05 mold m⁻³ Na₂SO₄ solution (pH 6.2) was investigated over 24 h. The initial open circuit potential for the Zn–Ni–TiO₂ and Zn–TiO₂ coatings were −1.32 and −1.51 V (vs. Hg/Hg₂SO₄), respectively, and changed to −1.10 and –1.49 V (vs. Hg/Hg₂SO₄) after 24 h of immersion. Data extracted from the steady state polarization curves demonstrated that the metal–TiO₂ nanocomposites have, with respect to the metal coatings, a higher corrosion potential in the case of the Zn–Ni alloy composite; a lower corrosion potential in the case of Zn-based nanocomposite albeit the predominant (002) crystallographic orientation; and a lower initial corrosion resistance due to the smaller grain size and higher porosity in the Zn–Ni–TiO₂ and Zn–TiO₂ nanocomposites. Morphological and chemical analyses showed that a thicker passive layer is formed on the surface of the Zn–Ni–TiO₂ and Zn–TiO₂ deposits. After 24 h of immersion in the sulphate solution, the Zn–Ni–TiO₂ coating has the highest corrosion stability due to the double-protective action created by the deposit’s surface enrichment in Ni plus the higher amount of corrosion products.     

Insight into structural,mechanical, electronic and thermodynamic properties of intermetallic phases in Zr–Sn system from first-principles calculations

The structural, phase stabilities, mechanical, electronic and thermodynamic properties of intermetallic phases in Zr–Sn system are investigated by using first-principles method. The equilibrium lattice constants, enthalpy of formation (ΔH^form) and elastic constants are obtained and compared with available experimental and theoretical data. The configuration of Zr₄Sn is measured with reasonable precision. The ΔH^form of five hypothetical structures are obtained in order to find possible metastable phase for Zr–Sn system. The mechanical properties, including bulk modulus, shear modulus, Young's modulus and Poisson's ratio, are calculated by Voigt–Reuss–Hill approximation and the Zr₅Sn₄ and Zr₅Sn₃ show excellent mechanical properties. The electronic density of states for Zr₅Sn₄, Zr₅Sn₃ and cP8-Zr₃Sn are calculated to further investigate the stability of intermetallic compounds. Through the quasi-harmonic Debye model, the Debye temperature, heat capacity and thermal expansion coefficient under temperature of 0–300 K and pressure of 0–50 GPa for Zr₅Sn₃ and Zr₅Sn₄ are deeply investigated.     

The effects of power ultrasound (24 kHz) on the electrochemical reduction of CO2 on polycrystalline copper electrodes

The electrochemical CO₂ reduction reaction (CO2RR) on polycrystalline copper (Cu) electrode was performed in a CO₂-saturated 0.10 M Na₂CO₃ aqueous solution at 278 K in the absence and presence of low-frequency high-power ultrasound (f = 24 kHz, P_T ~ 1.23 kW/dm³) in a specially and well-characterized sonoelectrochemical reactor. It was found that in the presence of ultrasound, the cathodic current (I_c) for CO₂ reduction increased significantly when compared to that in the absence of ultrasound (silent conditions). It was observed that ultrasound increased the faradaic efficiency of carbon monoxide (CO), methane (CH₄) and ethylene (C₂H₄) formation and decreased the faradaic efficiency of molecular hydrogen (H₂). Under ultrasonication, a ca. 40% increase in faradaic efficiency was obtained for methane formation through the CO2RR. In addition, and interestingly, water-soluble CO₂ reduction products such as formic acid and ethanol were found under ultrasonic conditions whereas under silent conditions, these expected electrochemical CO2RR products were absent. It was also found that power ultrasound increases the formation of smaller hydrocarbons through the CO2RR and may initiate new chemical reaction pathways through the sonolytic di-hydrogen splitting yielding other products, and simultaneously reducing the overall molecular hydrogen gas formation.     

Ferroelectric polarization and resistive switching characteristics of ion beam assisted sputter deposited BaTiO3 thin films

In this work, 150 nm thick polycrystalline BaTiO₃ (BTO) films were deposited on Pt/TiO₂/SiO₂/Si substrate by ion beam assisted sputter deposition technique. The bias voltage dependent resistive switching (RS) and ferroelectric polarization characteristics of Au/BTO/Pt devices are investigated. The devices display the stable bipolar RS characteristics without an initial electroforming process. Fittings to current–voltage (I–V) curves suggest that low and high resistance states are governed, respectively, by filamentary model and trap controlled space charge limited conduction mechanism, where the oxygen vacancies act as traps. Presence of oxygen vacancies is evidenced from the photoluminescence spectrum. The devices also display P–V loops with remnant polarization (P_r) of 5.7 μC/cm² and a coercive electric field (E_c) of 173.0 kV/cm. The coupling between the ferroelectric polarization and RS effect in BTO films is demonstrated.     

Simple one-step ultrasonic synthesis of anatase titania/polypyrrole nanocomposites

In this work, hybrid nanocomposites based on anatase titania:polypyrrole (TiO₂:PPy) were directly obtained from a simple, one-step, ultrasonic (UT)-assisted synthesis. The properties of these crystalline nanocomposites were compared with those of others fabricated using cold (Cold)-assisted synthesis without any UT assistance, which required a hydrothermal treatment (HT) to yield crystalline anatase titania in the nanocomposite (TiO₂:PPy) at low temperature (130 °C) and in a short time (3 h). The SEM results demonstrated that the UT-assisted synthesis is a feasible method to obtain anatase TiO₂:PPy nanocomposites with controlled morphology using low energy. The Fourier transform infrared (FT-IR) bands of the crystalline nanocomposites exhibited a shift with respect to neat components, which was attributed to the strong interaction between the secondary amine groups (N–H) of PPy and the oxygen from TiO₂. The acceptable absorption in the visible region (λ_max = 670 nm) indicates that these nanocomposites are good candidates for harvesting energy in solar cells. Devices based on these nanocomposites were built to evaluate their electrical properties. An increase in the photocurrent was observed for the devices prepared with the nanocomposites from the UT-assisted synthesis.