Slip coefficients and macroparameter jumps of a diatomic gas with rotational degrees of freedom on a weakly curved spherical surface

Using the half-space moment method, the problem of the slip of a diatomic gas along a rigid spherical surface is solved within the framework of a model kinetic equation previously proposed which takes into account the rotational degrees of freedom of the gas. Second-order slip coefficients (correctionsC _m ^′ , β _R ^′ , and β _R to the isothermal and thermal slip which are linear with respect to the Knudsen number Kn) are obtained. The gas macroparameter jump coefficientsC _v andC _q, which are of the second order in the Knudsen number and characterize the discontinuity of the normal mass and heat fluxes on the gas-rigid phase interface, are calculated. These coefficients are given as functions of the tangential momentum accommodation coefficient, the translational and rotational energy accommodation coefficients, and the Prandtl number. The coefficients are calculated for certain diatomic gases. Moscow. Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No. 1, pp. 163–173, January–February, 2000.     

Experimental investigation of mixed convection in a rectangular duct with a heated plate in the middle of cross section

The flow and heat transfer in an inclined and horizontal rectangular duct with a heated plate longitudinally mounted in the middle of cross section was experimentally investigated. The heated plate and rectangular duct were both made of highly conductive materials, and the heated plate was subjected to a uniform heat flux. The heat transfer processes through the test section were under various operating conditions: Pr ≈ 0.7, inclination angle ϕ = −60° to +60°, Reynolds number Re = 334–1,911, Grashof number Gr = 5.26 × 10²–5.78 × 10⁶. The experimental results showed that the average Nusselt number in the entrance region was 1.6–2 times as large as that in the fully developed region. The average Nusselt numbers and pressure drops increased with the Reynolds number. The average Nusselt numbers and pressure drops decreased with an increase in the inclination angle from −60° to +60° when the Reynolds number was less than 1,500. But when the Reynolds number increased to over about 1,800, the heat transfer coefficients and pressure drops were independent of inclination angles.     

Laminar-turbulent transition in the boundary layer on cones in a hypersonic flow at high Reynolds numbers per meter

The laminar-turbulent transition is experimentally studied in boundary-layer flows on cones with a rectangular axisymmetric step in the base part of the cone and without the step. The experiments are performed in an A-1 two-step piston-driven gas-dynamic facility with adiabatic compression of the working gas with Mach numbers at the nozzle exit M _∞ = 12–14 and pressures in the settling chamber P₀ = 60–600 MPa. These values of parameters allow obtaining Reynolds numbers per meter near the cone surface equal to Re _1e = (53–200) · 10⁶ m ⁻¹. The transition occurs at Reynolds numbers Re _tr = (2.3–5.7) · 10⁶. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 48, No. 3, pp. 76–83, May–June, 2007.     

Irradiation-Induced Solute Clustering in a Low Nickel FeMnNi Ferritic Alloy

Understanding the radiation embrittlement of reactor pressure vessel (RPV) steels is required to be able to operate safely a nuclear power plant or to extend its lifetime. The mechanical properties degradation is partly due to the clustering of solute under irradiation. To gain knowledge about the clustering process, a Fe−1.1 Mn−0.7 Ni (at.%) alloy was irradiated in a test reactor at two fluxes of 0.15 and 9 ×10¹⁷ n _E > 1MeV .m^− 2.s^− 1 and at increasing doses from 0.18 to 1.3 ×10²⁴ n _E > 1MeV .m^− 2 at 300°C. Atom probe tomography (APT) experiments revealed that the irradiation promotes the formation in the α iron matrix of Mn/Mn and/or Ni/Ni pair correlations at low dose and Mn–Ni enriched clusters at high dose. These clusters dissolve partially after a thermal treatment at 400°C. Based on a comparison with thermodynamic calculations, we show that the solute clustering under irradiation can just result from an induced mechanism.     

The Onset of Darcy–Brinkman Electroconvection in a Dielectric Fluid Saturated Porous Layer

The combined effect of a vertical AC electric field and the boundaries on the onset of Darcy–Brinkman convection in a dielectric fluid saturated porous layer heated either from below or above is investigated using linear stability theory. The isothermal bounding surfaces of the porous layer are considered to be either rigid or free. It is established that the principle of exchange of stability is valid irrespective of the nature of velocity boundary conditions. The eigenvalue problem is solved exactly for free–free (F/F) boundaries and numerically using the Galerkin technique for rigid–rigid (R/R) and lower-rigid and upper-free (F/R) boundaries. It is observed that all the boundaries exhibit qualitatively similar results. The presence of electric field is emphasized on the stability of the system and it is shown that increasing the AC electric Rayleigh number R _ea is to facilitate the transfer of heat more effectively and to hasten the onset of Darcy–Brinkman convection. Whereas, increase in the ratio of viscosities Λ and the inverse Darcy number Da ⁻¹ is to delay the onset of Darcy–Brinkman electroconvection. Besides, increasing R _ea and Da ⁻¹ as well as decreasing Λ are to reduce the size of convection cells.     

Exact analytic solutions for free convection boundary layers on a heated vertical plate with lateral mass flux embedded in a saturated porous medium

 The problem of the self-similar boundary flow of a “Darcy-Boussinesq fluid” on a vertical plate with temperature distribution T _w(x) = T _∞+A·x ^λ and lateral mass flux v _w(x) = a·x ^(λ−1)/2, embedded in a saturated porous medium is revisited. For the parameter values λ = 1,−1/3 and −1/2 exact analytic solutions are written down and the characteristics of the corresponding boundary layers are discussed as functions of the suction/ injection parameter in detail. The results are compared with the numerical findings of previous authors. Received on 8 March 1999     

Combined heat transfer in a boundary layer of a selectiviely absorbing medium on a permeable plate under the conditions of intense radiation heating

Results of a numerical study of unsteady radiative-convective heat transfer in a boundary layer on a thermally thin permeable plate in the presence of intense radiation heating from outside are reported. The conjugate formulation of the problem takes into account the thermal interaction between the plate and an external gas flow. We consider a turbulent flow of an emitting-absorbing medium with the selective character of absorption. Calculation results are analyzed with a view for clarifying the influence of the governing parameters, namely, the relative temperature of an external radiation source, the Stark number, and the injection parameter. The possibility of inversion of a convective heat flux on the plate under the conditions of high-level external radiation is found. Kutateladze Institute of Thermal Physics, Siberian Division, Russian Academy of Sciences, Novosibirisk 630090. Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 39, No. 5, pp. 126–133, September–October, 1998.     

Strength of water under pulsed loading

Experiments were performed to study the strength of water under conditions of pulsed extension, which is typical of the interaction between a triangular compression pulse and a free surface. The tests were performed in a wide (40–1000 MPa) range of rariation in the amplitude of the compression pulse at deformation rates of 10⁴−10⁵ sec⁻¹. It is found that as the compression-pulse amplitude increases from 150 to 1050 MPa, the strength of water decreases from 46 to 22 MPa. The deformation rate was found to have little effect on the strength. The possibility of using the model of homogenous nucleation (formation of cavitation nuclei) to interpret the data obtained is discussed. Institute of Chemical Physical, Russian Academy of Sciences, Chernogolovka 142432. Translated from Prikladmaya Mekhanika i Tekhnicheskaya Fizika, Vol. 41, No. 4, pp. 198–205, July–August, 2000.     

Experimental study of vortex structures in a hypersonic shock layer on a flat plate

The characteristics of travelling perturbations of density in a hypersonic shock layer on a flat plate for the Mach number M_∞=21 and unit Reynolds numberRe ₁=6·10⁵ m⁻¹ were experimentally studied by the method of electron-beam fluorescence. The perturbations were generated by interaction of the shock layer behind an oblique gas-dynamic whistle and the leading edge of the plate. The cases of unsteady and quasi-steady interaction were considered. In both cases, vortex disturbances of finite amplitude were generated. The measurements were performed at the fundamental frequency F=0.6·10⁻⁴ and at the harmonic; the streamwise phase velocities, the growth rates of the disturbances, and the angles of wave propagation were obtained. The measurement results are compared with some experimental data for subsonic flows, some particular results of the linear stability theory for compressible flows, and the results obtained on the basis of a simple model of the nonlinear stage of disturbance evolution in a hypersonic boundary layer. Institute of Theoretical and Applied Mechanics, Siberian Division, Russian Academy of Sciences, Novosibirsk 630090. Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 40, No. 6, pp. 41–47, November–December, 1999.     

Flow past a plate with a moving surface

On the basis of a numerical solution of the unsteady Navier-Stokes equations, the flow past a finite plate with an upstream-moving surface is investigated. For the Reynolds numbers Re =10²−10⁴, the flow past the plate is analyzed as a function of the relative plate surface velocity. On the basis of this analysis a limiting mathematical model of the flow as Re → ∞ is proposed.     

Wave Packets, Signaling and Resonances in a Homogeneous Waveguide

We solve the initial-boundary-value linear stability problem for small localised disturbances in a homogeneous elastic waveguide formally by applying a combined Laplace – Fourier transform. An asymptotic evaluation of the solution, expressed as an inverse Laplace – Fourier integral, is carried out by means of the mathematical formalism of absolute and convective instabilities. Wave packets, triggered by perturbations localised in space and finite in time, as well as responses to sources localised in space, with the time dependence satisfying e^−iωt + O(e^−ɛt ), for t → ∞, where Im ω₀ = 0 and ω > 0 , that is, the signaling problem, are treated. For this purpose, we analyse the dispersion relation of the problem analytically, and by solving numerically the eigenvalue stability problem. It is shown that due to double roots in a wavenumber k of the dispersion relation function D(k, ω), for real frequencies ω, that satisfy a collision criterion, wave packets with an algebraic temporal decay and signaling with an algebraic temporal growth, that is, temporal resonances, are present in a neutrally stable homogeneous waveguide. Moreover, for any admissible combination of the physical parameters, a homogeneous waveguide possesses a countable set of temporally resonant frequencies. Consequences of these results for modelling in seismology are discussed. This revised version was published online in August 2006 with corrections to the Cover Date.     

Unsteady free convection on a vertical cylinder with variable heat and mass flux

The unsteady natural convection boundary layer flow over a semi-infinite vertical cylinder is considered with combined buoyancy force effects, for the situation in which the surface temperature T ^′ _w(x) and C ^′ _w(x) are subjected to the power-law surface heat and mass flux as K(T ^′/r) = −ax ⁿ and D(C ^′/r) = −bx ^m . The governing equations are solved by an implicit finite difference scheme of Crank-Nicolson method. Numerical results are obtained for different values of Prandtl number, Schmidt number ‘n’ and ‘m’. The velocity, temperature and concentration profiles, local and average skin-friction, Nusselt and Sherwood numbers are shown graphically. The local Nusselt and Sherwood number of the present study are compared with the available result and a good agreement is found to exist. Received on 7 July 1998     

Drag reduction of a nonnewtonian fluid by fluid injection on a moving wall

Summary A boundary layer problem of a nonnewtonian fluid flow with fluid injection on a semi-infinite flat plate whose surface moves with a constant velocity in the opposite direction to that of the uniform mainstream is analyzed. Concluding similarity equations are solved numerically to show the dependence of the problem to the velocity ratio λ of the plate to uniform flow and to the injection velocity parameter C. The critical values of λ and C for each nonnewtonian power-law index n are obtained, and their significance in drag reduction is discussed. Received 26 August 1997; accepted for publication 21 October 1998     

The investigation on dynamic fracture behavour of materials under compressive-shear combined stress waves

In this paper, an improved plate impact experimental technique is presented for studying dynamic fracture mechanism of materials, under the conditions that the impacting loading is provided by a single pulse and the loading time is in the sub-microsecond range. The impacting tests are carried out on the pressure-shear gas gun. The loading rate achieved is dK/dt∼10⁸ MPa m^1/2s⁻¹. With the elimination of influence of the specimen boundary, the plane strain state of a semi-infinite crack in an infinite elastic plate is used to simulate the deformation fields of crack tip. The single pulses are obtained by using the “momentum trap” technique. Therefore, the one-time actions of the single pulse are achieved by eradicating the stress waves reflected from the specimen boundary or diffracted from the crack surfaces. In the current study, some important phenomena have been observed. The special loading of the single pulse can bring about material damage around crack tip, and affect the material behavior, such as kinking and branching of the crack propagation. Failure mode transitions from mode I to mode II crack are observed under asymmetrical impact conditions. The mechanisms of the dynamic crack propagation are consistent with the damage failure model. The project supported by the National Natural Science Foundation of China (No. 19672066 and 18981180-4) and the Key Project of Chinese Academy of Sciences (No. KJ951-1-20)     

Experimental study of density fluctuations in a hypersonic laminar wake behind a cone

The characteristics of natural fluctuations of density in a laminar near wake behind a sharp cone in a hypersonic flow of nitrogen at zero incidence are studied by the method of electronbeam fluorescence at Mach numberM=21 and unit Reynolds numberRe ₁=6·10⁵ m⁻¹. The distributions of the mean density, integral fluctuations, and spectra of density fluctuations are obtained, the longitudinal and azimuthal phase velocities of perturbations are determined, and the growth rates of perturbations in the wake are found. The results are compared with the measurement data in the shock layer on a flat plate. Institute of Theoretical and Applied Mechanics, Siberian Division, Russian Academy of Sciences, Novosibirsk 630090. Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 41, No. 3, pp. 111–117, May–June, 2000     

Seismic efficiency of a contact explosion and a high-velocity impact

The seismic energy transferred to an elastic half-space as a result of a contact explosion and a meteorite impact on a planet’s surface is estimated. The seismic efficiency of the explosion and impact are evaluated as the ratio of the energy of the generated seismic waves to the energy of explosion or the kinetic energy of the meteorite. In the case of contact explosions, this ratio is in the range of 10⁻⁴–10⁻³. In the case of wide-scale impact effects, where the crater in the planet’s crust is produced in the gravitational regime, a formula is derived that relates the seismic efficiency of an impact to its determining parameters. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 48, No. 2, pp. 3–12, March–April, 2007.     

Modeling jet flows caused by the incidence of a shock wave on a profiled free surface

The problem of the incidence of a shock wave with a front-pressure amplitude of about 30 GPa at the profiled free surface of an aluminum sample is studied. It is shown that in the case of large perturbations (amplitude 1 mm and wavelength 10 mm), jet flows occur on the free surface. The data obtained are described using a kinetic fracture model that takes into account the damage initiation and growth in the material due to tensile stress and shear strain. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 48, No. 1, pp. 16–23, January–February, 2007.     

Measurement of the charge composition of ions in experiments on interaction of a laser plasma flow with a pulsed gas jet

The ion composition of a plasma flow obtained by intense irradiation of a solid target is determined by methods of probing diagnostics and measuring the secondary emission rate. As the ions fly through a dense gas jet, C ⁵⁺ ions are found to recharge to C ⁴⁺ ions and then to C ³⁺ ions. The fraction of high-charge ions in the initial plasma flow and their concentration in the region of interaction with the jet are calculated. The concentration of atoms in the gas jet is estimated on the basis of the integral change in the charge value. Results necessary for analyzing the conditions of experiments on effective charge-transfer pumping and laser generation in the far ultraviolet spectral range are obtained. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 50, No. 3, pp. 36–43, May–June, 2009.     

Heat and mass transfer study of impinging turbulent premixed flames

 Impinging jet combusting flows on granite plates are studied. A mathematical model for calculating heat release in turbulent impinging premixed flames is developed. The combustion including radiative heat transfer and local extinction effects, and flow characteristics are modeled using a finite volume computational approach. Two different eddy viscosity turbulence models, namely the standard k–ɛ and the RNG k–ɛ model with and without radiation (discrete transfer model) are assessed. The heat released predictions are compared with experimental data and the agreement is satisfactory only when both radiative heat transfer and local extinction modeling are taken into account. The results indicate that the main effect of radiation is the decrease of temperature values near the jet stagnation point and along the plate surface. Radiation increases temperature gradients and affects predicted turbulence levels independently of the closure model used. Also, the RNG k–ɛ predicts higher temperatures close the solid plate, with and without radiative heat transfer. Received on 13 November 2000 / Published online: 29 November 2001     

Unsteady radiative-convective heat transfer in a high-temperature gas-particle flow past a semi-transparent plate

Numerical simulations of unsteady radiative-convective heat transfer in a turbulent flow of a mixture of gases and solid particles past a semi-transparent plate are performed. An ablation process is demonstrated to occur on the plate surface in the case of intense radiative heating of the plate by an external source with emission in a limited spectral range. Temperature fields and distributions of heat fluxes in the boundary layer and in the plate are calculated. Calculation results are presented, which allow determining the effect of ablation and reflecting properties of the plate surface on the thermal state of the medium in the system containing the boundary layer and the plate under conditions of plate heating by a high-temperature source of radiation. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 50, No. 3, pp. 140–146, May–June, 2009.