Reactivity of Mo(PMe3)6 towards benzothiophene and selenophenes: new pathways relevant to hydrodesulfurization

Mo(PMe(3))(6) cleaves a C-S bond of benzothiophene to give (kappa(2)-CHCHC(6)H(4)S)Mo(PMe(3))(4), which rapidly isomerizes to the olefin-thiophenolate and 1-metallacyclopropene-thiophenolate complexes, (kappa(1),eta(2)-CH(2)CHC(6)H(4)S)Mo(PMe(3))(3)(eta(2)-CH(2)PMe(2)) and (kappa(1),eta(2)-CH(2)CC(6)H(4)S)Mo(PMe(3))(4). The latter two molecules result from a series of hydrogen transfers and are differentiated according to whether the termini of the organic fragments coordinate as olefin or eta(2)-vinyl ligands, respectively. The reactions between Mo(PMe(3))(6) and selenophenes proceed differently from those of the corresponding thiophenes. For example, whereas Mo(PMe(3))(6) reacts with thiophene to give eta(5)-thiophene and butadiene-thiolate complexes, (eta(5)-C(4)H(4)S)Mo(PMe(3))(3) and (eta(5)-C(4)H(5)S)Mo(PMe(3))(2)(eta(2)-CH(2)PMe(2)), selenophene affords the metallacyclopentadiene complex [(kappa(2)-C(4)H(4))Mo(PMe(3))(3)(Se)](2)[Mo(PMe(3))(4)] in which the selenium has been completely abstracted from the selenophene moiety. Likewise, in addition to (kappa(1),eta(2)-CH(2)CC(6)H(4)Se)Mo(PMe(3))(4) and (kappa(1),eta(2)-CH(2)CHC(6)H(4)Se)Mo(PMe(3))(3)(eta(2)-CH(2)PMe(2)), which are counterparts of the species observed in the benzothiophene reaction, the reaction of Mo(PMe(3))(6) with benzoselenophene yields products resulting from C-C coupling, namely [kappa(2),eta(4)-Se(C(6)H(4))(CH)(4)(C(6)H(4))Se]Mo(PMe(3))(2) and [mu-Se(C(6)H(4))(CH)C(CH)(2)(C(6)H(4))](mu-Se)[Mo(PMe(3))(2)][Mo(PMe(3))(2)H].     

A non-classical hydrogen bond in the molybdenum arene complex [eta 6-C6H5C6H3(Ph)OH]Mo(PMe3)3: evidence that hydrogen bonding facilitates oxidative addition of the O-H bond

Mo(PMe3)6 reacts with 2,6-Ph2C6H3OH to give the eta 6-arene complex [eta 6-C6H5C6H3(Ph)OH]Mo(PMe3)3 which exhibits a non-classical Mo...H-OAr hydrogen bond; DFT calculations indicate that the hydrogen bonding interaction facilitates oxidative addition of the O-H bond to give [eta 6,eta 1-C6H5C6H3(Ph)O]Mo(PMe3)2H.     

The reactivity of Mo(PMe3)(6) towards heterocyclic nitrogen compounds: transformations relevant to hydrodenitrogenation

The reactions of Mo(PMe3)6 towards a variety of five- and six-membered heterocyclic nitrogen compounds (namely, pyrrole, indole, carbazole, pyridine, quinoline, and acridine) have been studied to provide structural models for the coordination of these heterocycles to the molybdenum centers of hydrodenitrogenation catalysts. Pyrrole reacts with Mo(PMe3)6 to yield the eta5-pyrrolyl derivative (eta5-pyr)Mo(PMe3)3H, while indole gives sequentially (eta1-indolyl)Mo(PMe3)4H, (eta5-indolyl)Mo(PMe3)3H, and (eta6-indolyl)Mo(PMe3)3H, with the latter representing the first example of a structurally characterized complex with an eta6-indolyl ligand. Likewise, carbazole reacts with Mo(PMe3)6 to give (eta6-carbazolyl)Mo(PMe3)3H with an eta6-carbazolyl ligand. The reactions of Mo(PMe3)6 with six-membered heterocyclic nitrogen compounds display interesting differences in the nature of the products. Thus, Mo(PMe3)6 reacts with pyridine to give an eta2-pyridyl derivative [eta2-(C5H4N)]Mo(PMe3)4H as a result of alpha-C-H bond cleavage, whereas quinoline and acridine give products of the type (eta6-ArH)Mo(PMe3)3 in which both ligands coordinate in an eta6-manner. For the reaction with quinoline, products with both carbocyclic and heterocyclic coordination modes are observed, namely [eta6-(C6)-quinoline]Mo(PMe3)3 and [eta6-(C5N)-quinoline]Mo(PMe3)3, whereas only carbocyclic coordination is observed for acridine.     

Ti-Mo heterobimetallic thiacalix[4]arene complex containing an unusual alpha-agostic micro2-eta5:eta2-cyclopentadienyl ligand

A stepwise reaction of p-tert-butylthiacalix[4]arene (TC4A-(OH)(4)) with [CpTiCl3]-NEt(3) and cis-[Mo(N(2))(2)(PMe(2)Ph)(4)] afforded a new Ti-Mo heterobimetallic complex [TC4A-(O)(4)Ti(micro2-C(5)H(5))MoH(PMe(2)Ph)(2)] which shows an unusual alpha-agostic micro2-eta5:eta2-coordination of a cyclopentadienyl ligand.     

B(C6F5)3 adducts of transition metal acyl compounds

The transition metal acyl compounds [Co(L)(CO)3(COMe)] (L = PMe3, PPhMe2, P(4-Me-C6H4)3, PPh3 and P(4-F-C6H4)3), [Mn(CO)5(COMe)] and [Mo(PPh3)(eta(5)-C5H5)(CO)2(COMe)] react with B(C6F5)3 to form the adducts [Co(L)(CO)3(C{OB(C6F5)3}Me)] (L = PMe3, 1, PPhMe2, 2, P(4-Me-C6H4)3, 3, PPh3, 4, P(4-F-C6H4)3), 5, [Mn(CO)5(C{OB(C6F5)3}Me)] 6 and [Mo(eta(5)-C5H5)(PPh3)(CO)2(C{OB(C6F5)3}Me)], 7. Addition of B(C6F5)3 to a cooled solution of [Mo(eta(5)-C5H5)(CO)3(Me)], under an atmosphere of CO gave [Mo(eta(5)-C5H5)(CO)3(C{OB(C6F5)3}Me)] 8. In the presence of adventitious water, the compound [Co{HOB(C6F5)3}2{OP(4-F-C6H4)3}2] 9, was formed from [Co(P(4-F-C6H4)3)(CO)3(C{OB(C6F5)3}Me)]. The compounds 4 and 9 have been structurally characterised. The use of B(C6F5)3 as a catalyst for the CO-induced migratory-insertion reaction in the transition metal alkyl compounds [Co(PPh3)(CO)3(Me)], [Mn(CO)5(Me)], [Mo(eta(5)-C5H5)(CO)3(Me)] and [Fe(eta(5)-C5H5)(CO)2(Me)] has been investigated.     

Oxidative addition of dihydrogen to (eta6-arene)Mo(PMe3)3 complexes: origin of the naphthalene and anthracene effects

In contrast to the benzene and naphthalene compounds (eta(6)-PhH)Mo(PMe(3))(3) and (eta(6)-NpH)Mo(PMe(3))(3), the anthracene complex (eta(6)-AnH)Mo(PMe(3))(3) reacts with H(2) to undergo a haptotropic shift and give the eta(4)-anthracene compound (eta(4)-AnH)Mo(PMe(3))(3)H(2). Density functional theory calculations indicate that the increased facility of naphthalene and anthracene to adopt eta(4)-coordination modes compared to that of benzene is a consequence of the fact that the Mo-(eta(4)-ArH) bonding interaction increases in the sequence benzene < naphthalene < anthracene, while the Mo-(eta(6)-ArH) bonding interaction follows the sequence benzene > naphthalene approximately anthracene.     

Organometallic building blocks with amino-substituted cyclopentadienyl and boratabenzene ligands for the synthesis of heterometallic complexes and clusters

A comparative study of the reactivity of isolobal rhenium and molybdenum carbonylmetallates containing a borole, in [Re(eta5-C4H4BPh)(CO)3]- (2), a boratanaphthalene, in [Mo(eta5-2,4-MeC9H6BMe)(CO)3]- (4a) and [Mo(eta5-2,4-MeC9H6BNi-Pr2)(CO)3]- (4b), a boratabenzene, in [Mo(eta5-3,5-Me2C5H3BNi-Pr2)(CO)3]- (6) or a dimethylaminocyclopentadienyl ligand, in [Mo(eta5-C5H4NMe2)(CO)3]- (7), toward palladium(II), gold(I), mercury(II) and platinum(II) complexes has allowed an evaluation of the role of these pi-bonded ligands on the structures and unprecedented coordination modes observed in the resulting metal-metal bonded, heterometallic complexes. The new metallate 6 was reacted with [AuCl(PPh3)], and with 1 or 2 equiv. HgCl2, which afforded the new heterodinuclear complexes [Au{Mo(eta5-3,5-Me2C5H3BNi-Pr2)(CO)3}(PPh3)] (Mo-Au) (10) and [Hg{Mo(eta5-3,5-Me2C5H3BNi-Pr2)(CO)3}Cl] (Hg-Mo) (11) and the heterometallic chain complex [Hg{Mo(eta5-3,5-Me2C5H3BNi-Pr2)(CO)3}2] (Mo-Hg-Mo) (12), respectively. Reactions of the new metallate 7 with HgCl2, trans-[PtCl2(CNt-Bu)2] and trans-[PtCl2(NCPh)2] yielded the heterodinuclear complex [Hg{Mo(eta5-C5H4NMe2)(CO)3}Cl] (Mo-Hg) (15), the heterotrinuclear chain complexes trans-[Pt{Mo(eta5-C5H4NMe2)(CO)3}2(CNt-Bu)2] (Mo-Pt-Mo) (16) and trans-[Pt{Mo(eta5-C5H4NMe2)(CO)3}2(NCPh)2] (Mo-Pt-Mo) (17), the mononuclear complex [Mo(eta5-C5H4NMe2)(CO)3Cl] (18), the lozenge-type cluster [Mo2Pt2(eta5-C5H4NMe2)2(CO)8] (19) and the heterodinuclear complex [[upper bond 1 start]Pt{Mo(eta5-C5H4N[upper bond 1 end]Me2)(CO)3}(NCPh)Cl](Mo-Pt) (20), respectively. The complexes 11, 16, 17.2THF, 18 and 20 have been structurally characterized by X-ray diffraction and 20 differs from all other compounds in that the dimethylaminocyclopentadienyl ligand forms a bridge between the metals.     

Four-coordinate Mo(II) as (silox)2Mo(PMe3)2 and its W(IV) congener (silox)2HW(eta2-CH2PMe2)(PMe3) (silox = tBu3SiO)

The reduction of [( (t) Bu 3SiO) 2MoCl] 2 ( 2 2) provided the cyclometalated derivative, (silox) 2HMoMo(kappa-O,C-OSi (t) Bu 2CMe 2CH 2)(silox) ( 3), and alkylation of 2 2 with MeMgBr afforded [( (t) Bu 3SiO) 2MoCH 3] 2 ( 4 2). The hydrogenation of 4 2 was ineffective, but the reduction of 2 2 under H 2 generated [( (t) Bu 3SiO) 2MoH] 2 ( 5 2), and the addition of 2-butyne to 3 gave [(silox) 2Mo] 2(mu:eta (2)eta (2)-C 2Me 2) ( 6), thereby implicating the existence of [(silox) 2Mo] 2 ( 1 2). The addition of (silox)H to Mo(NMe 2) 4 led to (silox) 2Mo(NMe 2) 2 ( 7), but further elaboration of the core proved ineffective. The silanolysis of MoCl 5 afforded (silox) 2MoCl 4 ( 8) and (silox) 3MoCl 3 ( 9) as a mixture from which pure 8 could be isolated, and the addition of THF or PMe 3 resulted in derivatives of 9 as (silox) 2Cl 3MoL (L = THF, 10; PMe 3, 11). Reductions of 11 and (silox) 2WCl 4 ( 15) in the presence of excess PMe 3 provided (silox) 2Cl 2MPMe 3 (M = Mo, 12; W, 16) or (silox) 2HW(eta (2)-CH 2PMe 2)PMe 3 ( 14). While "(silox) 2W(PMe 3) 2" was unstable with respect to W(IV) as 14, a reduction of 12 led to the stable Mo(II) diphosphine, (silox) 2Mo(PMe 3) 2 ( 17). X-ray crystal structures of 10 (pseudo- O h ), 12 (square pyramidal), and 14 and 17 (distorted T d ) are reported. Calculations address the diamagnetism of 12 and 16, and the distortion of 17 and its stability to cyclometalation in contrast to 14.     

A normal equilibrium isotope effect for oxidative addition of H2 to (eta6-anthracene)Mo(PMe3)3

Oxidative addition of H2 and D2 to the anthracene complex (eta6-AnH)Mo(PMe3)3 giving (eta4-AnH)Mo(PMe3)3X2 (X = H, D) is characterized by a normal equilibrium isotope effect (KH/KD > 1) at temperatures close to ambient; calculations on (eta4-AnH)Mo(PH3)3H2 indicate that this is a consequence of relatively low energy Mo-H vibrational modes.     

Chelate and pincer carbene complexes of rhodium and platinum derived from hexaphenylcarbodiphosphorane, Ph3P=C=PPh3

The reaction of [(cod)RhCl]2 with Ph3P=C=PPh3 (1) gave the bidentate Rh(I) carbene complex, (cod)Rh[eta2-C{P(C6H4)Ph2}{PPh3}] (2), in which one of the Ph groups in 1 underwent orthometalation to form the chelate. Displacement of cod by 2 equiv of PMe3 transformed 2, via a second orthometalation event, into the Rh(III) C,C,C pincer carbene complex, HRh(PMe3)2[eta3-C{P(C6H4)Ph2}2] (3). The reaction of [Me2Pt(SMe2)]2 with 1 led directly to the analogous C,C,C pincer carbene complex of Pt(II), (Me2S)Pt[eta3-C{P(C6H4)Ph2}2] (4). DFT calculations on a model form of 3 suggest a net single sigma-bonding interaction between Rh and an sp2-hybridized carbene center, with a HOMO that is predominantly carbene pz in character.     

Mononuclear and dinuclear molybdenum and tungsten complexes of p-tert-butyltetrathiacalix[4]arene and p-tert-butyltetrasulfonylcalix[4]arene: facile cleavage of the calixarene ligand framework by nickel

The reactivity of p-tert-butyltetrathiacalix[4]arene, [S4CalixBut(OH)4], and p-tert-butyltetrasulfonylcalix[4]arene, [(SO2)4CalixBut(OH)4], toward Mo(PMe3)5H2, Mo(PMe3)6, and W(PMe3)4(eta2-CH2PMe2)H has been used to synthesize a series of mononuclear molybdenum and tungsten calixarene compounds that feature both coordinatively saturated and unsaturated metal centers, such as [S4CalixBut(OH)2(O)2]M(PMe3)3H2 (M = Mo, W), [(SO2)4CalixBut(OH)2(O)2]M(PMe3)3H2, [S4CalixBut(OH)2(O)2]Mo(PMe3)3, [(SO2)4CalixBut(OH)2(O)2]Mo(PMe3)3, and [(SO2)4CalixBut(OH)(O)3]M(PMe3)3H. Comparison with the related {[CalixBut(OH)2(O)2]M} complexes indicates that the chemistry of the system is strongly influenced by the nature of the calixarene linker, that is, CH2, S, and SO2. For example, in contrast to the methylene-bridged calixarene system, the thiacalixarene and sulfonylcalixarene systems readily coordinate a second metal center to form homo- and heterodinuclear complexes, namely {[S4CalixBut(O)4]}[M(PMe3)3H2]2, {[(SO2)4CalixBut(O)4]}[Mo(PMe3)3H2]2 and {[S4CalixBut(O)4]}[Mo(PMe3)3H2][W(PMe3)3H2]. Of most interest, incorporation of nickel into [S4CalixBut(OH)2(O)2]M(PMe3)3H2 using Ni(PMe3)4 results in cleavage of a C- bond to give [(SArButOH)(SArButO)3][M(PMe3)3H2][Ni(PMe3)2], an observation that is of relevance to the role that nickel plays in hydrodesulfurization catalysis.     

Strain-controlled, photochemically, or thermally promoted haptotropic shifts of cyclopentadienyl ligands in group 8 metallocenophanes

Cyclopentadienyl (Cp) ligands in moderately strained [1]- and [2]ferrocenophanes [Fe{(eta5-C5H4)2(ERx)y}: Fe{(eta5-C5H4)2SiMe2} (1), Fe{(eta5-C5H4)CH2}2 (10)] and highly strained [2]ruthenocenophanes [Ru{(eta5-C5H4)CR2}2 {R = H (15), Me (16)}] are susceptible to partial substitution by P donors and form mixed-hapticity metallocycles-[M(L2){(eta5-C5H4)(ERx)y(eta1-C5H4)}]: [Fe(dppe){(eta5-C5H4)SiMe2(eta1-C5H4)}] (5), [Fe(dmpe){(eta5-C5H4)SiMe2(eta1-C5H4)}] (6), [Fe(dmpe){(eta5-C5H4)(CH2)2(eta1-C5H4)}] (11), [Ru(dmpe){(eta5-C5H4)(CH2)2(eta1-C5H4)}] (17), [Ru(dmpe){(eta5-C5H4)(CMe2)2(eta1-C5H4)}] (18), and [Ru(PMe3)2{(eta5-C5H4)(CH2)2(eta1-C5H4)}] (19)-through haptotropic reduction of one eta5-, pi-bound Cp to eta1, sigma-coordination. These reactions are strain-controlled, as highly ring-tilted [2]ruthenocenophanes 15 and 16 [tilt angles (alpha) approximately 29-31 degrees ] react without irradiation to form thermodynamically stable products, while moderately strained [n]ferrocenophanes 1 and 10 (alpha approximately 19-22 degrees ) require photoactivation. The iron-containing photoproducts 5 and 11 are metastable and thermally retroconvert to their strained precursors and free phosphines at 70 degrees C. In contrast, the unprecedented ring-opening polymerization (ROP) of the essentially ring-strain-free adduct 6 to afford poly(ferrocenyldimethylsilane) [Fe(eta5-C5H4)2SiMe2]n (Mw approximately 5000 Da) was initiated by the thermal liberation of small amounts of P donor. Unlike reactions with bidentate analogues, monodentate phosphines promoted photolytic ROP of ferrocenophanes 1 and 10. MALDI-TOF analysis suggested a cyclic structure for the soluble poly(ferrocenyldimethylsilane), 8-cyclic, produced from 1 in this manner. While the polymer likewise produced from 10 was insoluble, the initiation step in the ROP process was modeled by isolation of a tris(phosphine)-substituted ring-opened ferrocenophane [Fe(PMe3)3{(eta5-C5H4)(CH2)2(C5H5)}][OCH2CH3] (13[OCH2CH3]) generated by irradiation of 10 and PMe3 in a protic solvent (EtOH). Studies of the cation 13 revealed that the Fe center reacts with a Cp- anion with loss of the phosphines to form [Fe(eta5-C5H5){(eta5-C5H4)(CH2)2(C5H5)}] (14) under conditions identical to those of the ROP experiments, confirming the likelihood of "back-biting" reactions to yield cyclic structures or macrocondensation to produce longer chains.     

Ring-opening reaction of phosphorus-bridged [1]ferrocenophane via ring slippage from eta(5)- to eta(1)-Cp

A reaction mechanism was investigated for a ring-opening reaction of RP(E)-bridged [1]ferrocenophane, where RP(E) = PhP(S) (3a), PhP (3b), and MesP (3c) (Mes = 2,4,6-trimethylphenyl). Irradiation of UV-vis light in the presence of an excess amount of P(OMe)(3) transformed 3a to [Fe(PhP(S)(eta(5)-C(5)H(4))(eta(1)-C(5)H(4)))(P(OMe)(3))(2)] (4a), in which one of the two cyclopentadienyl (Cp) rings of 3a changed its coordination mode from eta(5) to eta(1) and vacant coordination sites thus formed on the iron center were occupied by two P(OMe)(3) ligands. The molecular structure of 4a was determined by X-ray analysis, in which eta(1)-Cp adopted a 1-Fe-2-P-1,3-cyclopentadiene structure. Under the same reaction conditions, 3b and 3c also gave similar ring-slipped products 4b and 4c, respectively. Photolysis of 3a using more strongly coordinating PMe(3) in place of P(OMe)(3) led to complete dissociation of a Cp ligand from the iron center to form [Fe(PhP(S)(eta(5)-C(5)H(4))(C(5)H(4)))(PMe(3))(3)] (5). The formation of the ring-slipped and -dissociated products on the photolysis of 3 strongly supports the view that photolytic ring-opening polymerization of 3 proceeds via an unprecedented Fe-Cp bond cleavage mechanism.     

Mono(cycloheptatrienyl) tantalum chemistry: synthesis and characterization of new tantalum halide, hydride, and alkyl species

The new tantalum(II) complex (eta (6)-C 7H 8)TaCl 2(PMe 3) 2 ( 1) was synthesized by the reduction of TaCl 5 with n-butyllithium in the presence of PMe 3 and cycloheptatriene. Compound 1 adopts a four-legged piano stool structure in which the tantalum center is bound to a eta (6)-cycloheptatriene ring in addition to two chlorides and two phosphine ligands in a transoid arrangement. Treatment of 1 with methyllithium results in a loss of the equivalents of HCl and formation of the eta (7)-cycloheptatrienyl complex (eta (7)-C 7H 7)TaCl(PMe 3) 2 ( 2), whereas treatment of 1 with sodium or sodium borohydride affords small amounts of the eta (5)-cycloheptadienyl complex (eta (5)-C 7H 9)TaCl 2(PMe 3) 2 ( 3). Compound 2 adopts a three-legged piano stool structure; the eta (7)-C 7H 7 ring is fully aromatic and planar. The molecular structure of 3 is similar to that of 1, except for the eta (5) binding mode of the seven-membered ring. Treatment of the previously described sandwich compound (C 5Me 5)Ta(C 7H 7) with allyl bromide affords the tantalum(V) product (C 5Me 5)Ta(C 7H 7)Br ( 4), which reacts with LiAlH 4 to give the tantalum(V) hydride (C 5Me 5)Ta(C 7H 7)H ( 5). Compound 4 also reacts with alkylating agents to generate the methyl, allyl, and cyclopropyl complexes (C 5Me 5)Ta(C 7H 7)Me ( 6), (C 5Me 5)Ta(C 7H 7)(eta (1)-CH 2CHCH 2) ( 7), and (C 5Me 5)Ta(C 7H 7)(c-C 3H 5) ( 8). Compounds 4- 8 all adopt bent sandwich structures in which the dihedral angle between the two carbocyclic rings is 34.9 degrees for the bromo compound 4, 26.6 degrees for the hydride 5, 33.1 degrees for the methyl compound 6, 34.2 degrees for the allyl compound 7, and 37.5 degrees for the cyclopropyl compound 8. (1)H and (13)C NMR data are reported for the diamagnetic compounds.     

Synthesis and molecular and electronic structure of an unusual paramagnetic borohydride complex Mo(NAr)2(PMe3)2(eta2-BH4)

Reaction of Mo(NAr)2Cl2(DME) (Ar=2,6-C6H3iPr2, DME=1,2-dimethoxyethane) with NaBH4 and PMe3 in THF formed the paramagnetic Mo(V) d1 borohydride complex Mo(NAr)2(PMe3)2(eta2-BH4) (1). Compound 1, which was characterized by EPR spectroscopy and X-ray diffraction analysis, provides a rare example both of a paramagnetic bis(imido) group 6 compound and a structurally characterized molybdenum borohydride complex. Density functional theory calculations were used to determine the electronic structure and bonding parameters of 1 and showed that it is best viewed as a 19 valence electron compound (having a primarily metal-based SOMO) in which the BH4- ligand behaves as a sigma-only, 2-electron donor.     

Two metal centers bridging two C60 cages as a wide passage for efficient interfullerene electronic interaction

The reaction of Ir4(CO)8(PMe3)4 with excess C60 in refluxing 1,2-dichlorobenzene, followed by treatment by CNR (R = CH2C6H5) at 70 degrees C, affords a fullerene-metal sandwich complex Ir4(CO)3(mu4-CH)(PMe3)2(mu-PMe2)(CNR)(mu-eta2,eta2-C60)(mu4-eta1,eta1,eta2,eta2-C60) (1), which exhibits an interesting structural feature of two metal atoms bridging the two C60 centers as well as the first example of a mu4-eta1,eta1,eta2,eta2-C60 bonding mode. Compound 1 has been characterized by NMR spectroscopy, elemental analysis, and X-ray diffraction study. A cyclic voltammetry study reveals strong electronic communication between the two C60 centers in 1, which is due to the presence of a wide channel of two metal centers between the two C60 cages for efficient electronic interaction.     

Comparative bonding behavior of functional cyclopentadienyl ligands and boron-containing analogues in heterometallic complexes and clusters

The reactivity of isolobal molybdenum carbonylmetalates containing a 2-boratanaphthalene, [Mo(eta5-2,4-MeC9H6BMe)(CO)3]- (5a) and [Mo(eta5-2,4-MeC9H6BNi-Pr2)(CO)3]- (5b), a 1-boratabenzene, [Mo(eta5-3,5-Me2C5H3BNi-Pr2)(CO)3]- (8), or a functionalized cyclopentadienyl ligand, the new metalate [Mo(eta5-C5H4Ph)(CO)3]- (7) and [Mo(eta5-C5H4NMe2)(CO)3]- (9), toward palladium (I and II) or platinum (I and II) complexes, such as trans-[PdCl2(NCPh)2], [Pd2(NCMe)6](BF4)2, trans-[PtCl2(PEt3)2], and [N(n-Bu)4]2 [Pt2Cl4(CO)2], has been investigated, and this has allowed an evaluation of the influence of the pi-bonded ligands on the structures and unprecedented coordination modes observed in the resulting metal-metal-bonded heterometallic clusters. The new 58 CVE planar-triangulated centrosymmetric clusters, [Mo2Pd2(eta5-C5H4Ph)2(CO)6(PEt3)2] (11), [Mo2Pd2(eta5-2,4-MeC9H6BNi-Pr2)2(CO)6] (12), [Mo(2)Pd(2)(eta5-3,5-Me2C5H3BNi-Pr2)2(CO)6] (13), [Mo2Pd2(eta5-C5H4NMe2)2(CO)6(PEt3)2] (15), [Mo2Pt2(eta5-C5H4NMe2)2(CO)6(PEt3)2] (16), and [Mo2Pt2(eta5-C5H4NMe2)2(CO)8] (20), have been characterized by single-crystal X-ray diffraction. Their structural features were compared with those of the 54 CVE cluster [Re2Pd2(eta5-C4H4BPh)2(CO)6)] (4), previously obtained from the borole-containing metalate [Re(eta5-C4H4BPh)(CO)3]- (2), in which a 2e-3c B-C(ipso)-Pd interaction involving the pi-ring was observed. As an extension of what has been observed in 4, clusters 12 and 13 present a direct interaction of the boratanaphthalene (12) and the boratabenzene (13) ligands with palladium. In clusters 11, 15, 16, and 20, the pi-ring does not interact with the palladium (11 and 15) or platinum centers (16 and 20), which confers to these clusters a geometry very similar to that of [Mo2Pd2(eta5-C5H5)2(CO)6(PEt3)2] (3b). The carbonylmetalates [Mo(pi-ring)(CO)3]- are thus best viewed as formal four electron donors which bridge a dinuclear d9-d9 unit. The orientation of this building block in the clusters influences the shape of their metal cores and the bonding mode of the bridging carbonyl ligands. The crystal structure of new centrosymmetric complex [Mo(eta5-C5H4Ph)(CO)3]2 (10) was determined, and it revealed intramolecular contacts of 2.773(4) A between the carbon atoms of carbonyl groups across the metal-metal bond and intermolecular bifurcated interactions between the carbonyl oxygen atoms (2.938(4) and 3.029(4) A), as well as intermolecular C-H...pi(Ar)(C=C) interactions (2.334(3) and 2.786(4) A) involving the phenyl substituents.     

Sulfur-bridged early-late heterobimetallics synthesized by incorporation of titanium,vanadium, and molybdenum into bis(hydrosulfido) templates of group 9 metals

Reactions of the bis(hydrosulfido) complexes [Cp*Rh(SH)(2)(PMe(3))] (1a; Cp* = eta(5)-C(5)Me(5)) with [CpTiCl(3)] (Cp = eta(5)-C(5)H(5)) and [TiCl(4)(thf)(2)] in the presence of triethylamine led to the formation of the sulfido-bridged titanium-rhodium complexes [Cp*Rh(PMe(3))(micro(2)-S)(2)TiClCp] (2a) and [Cp*Rh(PMe(3))(micro2-S)(2)TiCl(2)] (3a), respectively. Complex 3a and its iridium analogue 3b were further converted into the bis(acetylacetonato) complexes [Cp*M(PMe(3))(micro(2)-S)(2)Ti(acac)(2)] (4a, M = Rh; 4b, M = Ir) upon treatment with acetylacetone. The hydrosulfido complexes 1a and [Cp*Ir(SH)(2)(PMe(3))] (1b) also reacted with [VCl(3)(thf)(3)] and [Mo(CO)(4)(nbd)] (nbd = 2,5-norbornadiene) to afford the cationic sulfido-bridged VM2 complexes [(Cp*M(PMe(3))(micro2-S)(2))2V](+) (5a(+), M = Rh; 5b(+), M = Ir) and the hydrosulfido-bridged MoM complexes [Cp*M(PMe(3))(micro2-SH)(2)Mo(CO)(4)] (6a, M = Rh; 6b, M = Ir), respectively.     

Iron-molybdenum charge-transfer hybrids containing organometallic and inorganic fragments bridged by aryldiazenido ligands in a mu-eta(6):eta(1) coordination mode: syntheses, characterization, X-ray structures, electrochemistry, and theoretical investigation

Representative members of a new family of covalently bonded charge-transfer molecular hybrids, of general formula [(eta5-C5H5)Fe(mu,eta6:eta1-p-RC6H4NN)Mo(eta2-S2CNEt2)3] +PF6- (R: H, 5+PF6-; Me, 6+PF6-; MeO, 7+PF6-) and [(eta5-C5Me5)Fe(mu,eta6:eta1-C6H5NN)Mo(eta2-S2CNEt2)3]+PF6-, 8+PF6-, have been synthesized by reaction of the corresponding mixed-sandwich organometallic hydrazines [(eta5-C5H5)Fe(eta6-p-RC6H4NHNH2)]+PF6- (R: H, 1+PF6-; Me, 2+PF6-; MeO, 3+PF6-) and [(eta5-C5Me5)Fe(eta6-C6H5NHNH2)]+PF6-, 4+PF6-, with cis-dioxomolybdenum(VI) bis(diethyldithiocarbamato) complex, [MoO2(S2CNEt2)2], in the presence of sodium diethyldithiocarbamato trihydrate, NaSC(=S)NEt2.3H2O, in refluxing methanol. These iron-molybdenum complexes consist of organometallic and inorganic fragments linked each other through a pi-conjugated aryldiazenido bridge coordinated in eta6 and eta1 modes, respectively. These complexes were fully characterized by FT-IR, UV-visible, and 1H NMR spectroscopies and, in the case of complex 7+PF6-, by single-crystal X-ray diffraction analysis. Likewise, the electrochemical and solvatochromic properties were studied by cyclic voltammetry and UV-visible spectroscopy, respectively. The electronic spectra of these hybrids show an absorption band in the 462-489 and 447-470 nm regions in CH2Cl2 and DMSO, respectively, indicating the existence of a charge-transfer transition from the inorganic donor to the organometallic acceptor fragments through the aryldiazenido spacer. A rationalization of the properties of 5+PF6--8+PF6- is provided through DFT calculations on a simplified model of 7+PF6-. Besides the heterodinuclear complexes 5+PF6--8+PF6-, the mononuclear molybdenum diazenido derivatives, [(eta1-p-RC6H4NN)Mo(eta2-S2CNEt2)3] (R: H, 9; Me, 10; MeO, 11), resulting from the decoordination of the [(eta5-C5H5)Fe]+ moiety of complexes 5+PF6--7+PF6-, were also isolated. For comparative studies, the crystalline and molecular structure of complex 10.Et2O was also determined by X-ray diffraction analysis and its electronic structure computed.     

Synthesis and characterisation of triselenocarbonate [CSe3]2- complexes

[Pt(CSe3)(PR3)2] (PR3= PMe3, PMe2Ph, PPh3, P(p-tol)3, 1/2 dppp, 1/2 dppf) were all obtained by the reaction of the appropriate metal halide containing complex with carbon diselenide in liquid ammonia. Similar reaction with [Pt(Cl)2(dppe)] gave a mixture of triselenocarbonate and perselenocarbonate complexes. [{Pt(mu-CSe3)(PEt3)}4] was formed when the analogous procedure was carried out using [Pt(Cl)2(PEt3)2]. Further reaction of [Pt(CSe3)(PMe2Ph)2] with [M(CO)6] (M = Cr, W, Mo) yielded bimetallic species of the type [Pt(PMe2Ph)2(CSe3)M(CO)5] (M = Cr, W, Mo). The dimeric triselenocarbonate complexes [M{(CSe3)(eta5-C5Me5)}2] (M = Rh, Ir) and [{M(CSe3)(eta6-p-MeC6H4(i)Pr)}2] (M = Ru, Os) have been synthesised from the appropriate transition metal dimer starting material. The triselenocarbonate ligand is Se,Se' bidentate in the monomeric complexes. In the tetrameric structure the exocyclic selenium atoms link the four platinum centres together.