Synthesis of lithium,sodium, cesium,and calcium salts of (E)-4- or (E,S)-3-methyl-2-(5-arylisoxazol-3-yl)-methyleneaminobutanoic, (E,S)-4-methyl-2- or (E,2S,3S)-3-methyl-2-(5-arylisoxazol-3-yl)methyleneaminopentanoic,and (E)-6-(5-arylisoxazol-3-yl)methyleneaminohexanoic acids

Preparative method for the synthesis of lithium, sodium, cesium, and calcium salts of (E)-4-(5-arylisoxazol-3-yl)methyleneaminobutanoic, (E)-6-(5-arylisoxazol-3-yl)methyleneaminohexanoic, (E,S)-3-methyl-2-(5-arylisoxazol-3-yl)methyleneaminobutanoic, (E,S)-4-methyl-2-(5-arylisoxazol-3-yl)methyleneaminopentanoic and (E,2S,3S)-3-methyl-2-(5-arylisoxazol-3-yl)methyleneaminopentanoic acids was developed by reacting 5-phenyl(4-tolyl)isoxazole-3-carbaldehydes with amino acids like 4-aminobutyric and 6-aminocaproic acids, L-valine, L-leucine or L-isoleucine in the presence of lithium hydride, sodium methoxide, cesium carbonate or calcium hydride in boiling methanol.     

FIA Potentiometric and Solvent Extraction Studies of Alkali Metal and Alkaline Earth Cation Complexation by bis(Tert-butylbenzo)-21-crown-7

Abstract

A flow injection analysis study of the potentiometric selectivity of bis[4(5)-tert-butylbenzo]-21-crown-7 (D(tBB)21C7) for cesium over the other alkali metal cations and three alkaline earth cations has been conducted. A PVC matrix membrane containing D(tBB)21C7 as an ionophore was coated on the tip of a silver wire incorporated in a flow cell. No selectivity for cesium over rubidium and only low selectivity over potassium were noted. However, very high selectivities for cesium over sodium, lithium, strontium, calcium, and magnesium were observed. Selectivity of D(tBB)21C7 in the solvent extraction of alkali metal cations was determined by the picrate extraction method. The percent extraction into deuteriochloroform decreased in the order cesium, rubidium > potassium » sodium » lithium. Thus good agreement was observed between the responses of D(tBB)21C7 towards alkali metal cations in polymeric membrane electrodes and in solvent extraction.     

The Syntheses of 4,4′-(1,n-Dioxaalkane)-bisbenzaldehydes and 4,4′-(1,n-Dioxaalkane)-bis(α-methoxy Phenylacetic Acids)

The syntheses of 4,4′-(1,n-dioxaalkane)-bis(α-methoxyphenylacetic acids) were conducted using a base-catalyzed reaction. The reactants were potassium hydroxide (or lithium hydroxide/lithium chloride), bromoform, methanol and 4,4′-(1,n-dioxaalkane)-bisbenzaldehydes. The aldehyde starting materials were prepared using the Williamson ether synthesis, by condensing p-hydroxybenzaldehyde and 1,n-dibromoalkanes with lithium hydride in ethanol. The effect of varying the hydrocarbon length in the dioxaalkane bridge unit is a significant consideration (the number of CH₂ units in the bridge varying from two to eight) in their acid salt formation.

     

Dodecahydroxy-closo-dodecaborate(2-).

The cesium salt of the icosahedral borane anion dodecahydroxy-closo-dodecaborate(2-), Cs(2)[closo-B(12)(OH)(12)], Cs(2)1, was prepared by heating cesium dodecahydro-closo-dodecaborate(2-), Cs(2)[closo-B(12)H(12)], Cs(2)2, with 30% hydrogen peroxide. The other alkali metal salts A(2)1 (A = Li, Na, K, Rb) precipitated upon addition of ACl to warm aqueous solutions of Cs(2)1. The ammonium salt, [NH(4)](2)1, and the (mu-nitrido)bis(triphenylphosphonium) salt, [PPN](2)1, were obtained similarly. The [H(3)O](2)1 salt precipitated upon acidification of aqueous solutions of Cs(2)1 with hydrochloric acid. The solubility of these salts in water was determined by measuring the boron content of saturated aqueous solutions of A(2)1 (A = Li, Na, K, Rb, Cs), [H(3)O](2)1, and [NH(4)](2)1 using ICP-AES. Although these salts are derived from a dianion with twelve pendant hydroxyl groups, the alkali metal salts surprisingly displayed low water solubilities. Water solubility decreases with a decrease in the radius of A(+), except for the lithium salt, which is slightly more soluble than the potassium salt. The [H(3)O](2)1 and the [NH(4)](2)1 salts provide rare examples of water-insoluble hydronium and ammonium salts. The low water solubility of the A(2)1 salts is attributed to the dianion's pendant hydroxyl groups, which appear to function as cross-linking ligands. Four alkali metal salts, A(2)1 (A = Na, K, Rb, Cs), were characterized in the solid state by single-crystal X-ray crystallography. These data revealed intricate networks in which several anions are complexed through their hydroxyl groups to each alkali metal cation. In addition, the anions are engaged in hydrogen bonding with each other and, if present, with water of hydration. This cross-linking results in the precipitation of aggregated salts. Cation coordination numbers decrease with cation radius. Thus, cesium and rubidium are ten-coordinate, whereas potassium is seven-coordinate and sodium is six-coordinate. The geometry of anion 1(2)(-) is independent of cation identity; the B-B and B-O bond lengths of the various A(2)1 salts (A = Na, K, Rb, Cs) are identical.     

Regioselective functionalization of 2-(2′-fluorophenyl)-3-cyanopyridine and its cyclization to benzo[h]-1,6-naphthyridines

Benzo[h]-1,6-naphthyridines and 5-ones, selectively functionalized at C-2, C-3, C-5 and C-10, were obtained by alkyllithium-, lithium amide- or potassium hydroxide-induced anionic cyclization of 3-cyano-2-(2-fluorophenyl)pyridine, which was functionalized regioselectively at positions 4, 5, 6, and 6′.     

Stereoselective synthesis of (E)- and (Z)-3-hydroxy-2-methyl-1-alkenyl iodides by base-promoted ring-opening of iodomethylated epoxides

Both (E)- and (Z)-3-hydroxy-2-methyl-1-alkenyl iodides were stereoselectively synthesized from iodomethylated epoxides by treatment with sodium hexamethyldisilazane in DMF and with LDA in THF (or lithium 2,2,6,6-tetramethylpiperidide in THF), respectively.     

Mössbauer study of the thermal decomposition of alkali tris(oxalato)ferrates(III)

The thermal decomposition of alkali (Li,Na,K,Cs,NH₄) tris(oxalato)ferrates(III) has been studied at different temperatures up to 700°C using Mössbauer, infrared spectroscopy, and thermogravimetric techniques. The formation of different intermediates has been observed during thermal decomposition. The decomposition in these complexes starts at different temperatures, i.e., at 200°C in the case of lithium, cesium, and ammonium ferrate(III), 250°C in the case of sodium, and 270°C in the case of potassium tris(oxalato)ferrate(III). The intermediates, i.e., Fe¹¹C₂O₄, K₆Fe¹¹₂(ox)₅. and Cs₂Fe¹¹ (ox)₂(H₂O)₂, are formed during thermal decomposition of lithium, potassium, and cesium tris(oxalato)ferrates(III), respectively. In the case of sodium and ammonium tris(oxalato)ferrates(III), the decomposition occurs without reduction to the iron(II) state and leads directly to α-Fe₂O₃.     

Experimental (FT-IR, FT-Raman, H, C NMR) and theoretical study of alkali metal 2-aminonicotinates

The influence of lithium, sodium, potassium, rubidium and cesium on the electronic system of 2-aminonicotinic acid (2-ANA) was studied by the methods of molecular spectroscopy. The vibrational (FT-IR, FT-Raman) and NMR (¹H and ¹³C) spectra of 2-aminonicotinic acid and its alkali metal salts were recorded. Characteristic shifts and changes in intensities of bands along the metal series were observed. The changes of chemical shifts of protons (¹H NMR) and carbons (¹³C NMR) in the series of studied alkali metal 2-aminonicotinates (2-AN) were observed too.Optimized geometrical structures of the studied compounds were calculated by the B3LYP method using the 6-311++G** basis set. Aromaticity indices, atomic charges, dipole moments and energies were also calculated. The theoretical chemical shifts in ¹H and ¹³C NMR spectra and theoretical wavenumbers and intensities of IR and Raman spectra were determined. The calculated parameters were compared to the experimental characteristics of the studied compounds.     

Highly conducting solid electrolytes based on poly (ethylene oxide-co-propylene oxide)

The conducting properties of solid electrolytes comprising random poly(ethylene oxide-co-propylene oxide) (of 84 : 16 monomer units mole ratio) and lithium, sodium, potassium, cesium, and rubidium salts have been studied. The systems containing some lithium or sodium salts achieved conductivity levels as high as 10^?5–10^?4 S/cm at ambient temperature and greater than 10^?3 S/cm at 100°C. However, the systems with rubidium and cesium salts exhibit conductivities a few orders of magnitude smaller. DSC studies show that the electrolytes studied are characterized by a high content of an amorphous phase (95–100%). It is suggested that the copolymer exhibits lower complexing abilities than that of poly(ethylene oxide), which results in a higher flexibility of electrolytes containing small cations and poor dissociation of the salts having large cations. © 1995 John Wiley & Sons, Inc.     

A simple and convenient synthesis of 3-[5-(trifluoromethyl)-1,2,3-triazol-4-yl]cinnamic acids from 4-aryl-6-(trifluoromethyl)-2H-pyran-2-ones and sodium azide

4-Aryl-6-(trifluoromethyl)-2H-pyran-2-ones and ethyl 4-aryl-6-(trifluoromethyl)-2-oxo-2H-pyran-3-carboxylates react with sodium azide to produce highly functionalized CF₃-1,2,3-triazoles: 3-[5-(trifluoromethyl)-1,2,3-triazol-4-yl]cinnamic acids and monoethyl esters of [5-(trifluoromethyl)-1,2,3-triazol-4-yl]arylmethylidene malonic acids.     

Effect of substituent position and lithium,sodium and potassium on the electronic structure of o-, m- and p-methoxybenzoic acids

We have studied the effect of the substituent position in the ring, and lithium, sodium and potassium ions on the electronic structure of o-, m- and p-methoxybenzoic acids (anisic acids) by the use of FT-IR, FT-Raman, Ar matrix FT-IR and ¹H NMR methods, and ab initio calculations at the B3LYP/6-311++G** level of theory. Characteristic shifts of the bands in the spectra and changes in the band intensities along the metal and ligand series were observed. On the basis of the obtained results we may answer the questions: (1) do the substituents in the benzene ring influence the electronic charge distribution in the carboxylic group of anisic acids and alkali metal anisates, (2) do the metal ions affect the electronic charge distribution in the methoxy group, (3) in what way do the alkali metals affect the electronic system of o-, m- and p-anisic acids? The substitution of lithium, sodium and potassium ions in the carboxylic group of o-, m- and p-anisic acids causes changes in the values of bond lengths and angles, and in the electronic charge distribution in the carboxylic group, methoxy group and aromatic ring. The influence of alkali metals on the electronic structure of the ligands is weaker than the effect of methoxy substituents. The effect of Li, Na and K ions on the aromatic ring of the ligands is mostly noticeable in the case of the ortho isomer. The carboxylic and methoxy groups situated in ortho positions in the ring weaken the effect of the alkali metals on the electronic charge distribution in the carboxylic anion and methoxy group.     

Some Transformations of (-)-(1S,4R)-1-Vinyl-7,7-dimethyl-bicyclo[2.2.1]heptan-2-one

Reactions were studied of (-)-(1S,4R)-1-vinyl-7,7-dimethylbicyclo[2.2.1]heptan-2-one with ethyl acetate lithium derivative, potassium acetylide, ozone, with a system OsO₄-N-methylmorpholine N-oxide, and some subsequent transformations of the products obtained.     

Synthesis of formyl and carboxy derivatives of heterocycles by modification of 2-(2-aminovinyl)- benzofuran-5,6-dicarbonitriles

Procedures have been developed for the synthesis of 2-formylbenzofuran-5,6-dicarbonitriles, 5,6-dicyanobenzofuran-2-carboxylic acids, and formyldibenzo[b,d]furan-2,3-dicarbonitriles by modification of 2-(2-aminovinyl)benzofuran-5,6-dicarbonitriles with sodium periodate or Vilsmeier reagent.     

Methyl (E)-2-(2-phenylcyclopropylidene)acetate: Synthesis, isomerization, and reaction with 1,3-diphenyl-2-benzofuran

Treatment of 3-methyl-2-phenylcycloprop-2-ene-1-carboxylic acid with potassium tert-butoxide induced its isomerization into trans-2-methylidene-3-phenylcyclopropane-1-carboxylic acid which was converted into methyl ester, and heating of the latter for 1 h in toluene gave methyl (E)-2-(2-phenylcyclopropylidene)acetate. Thermal isomerization of methyl (E)-2-(2-phenylcyclopropylidene)acetate on prolonged heating in toluene afforded 5-methoxy-3-methyl-2-phenylfuran, and the reaction with 1,3-diphenyl-2-benzofuran resulted in [4 + 2]-cycloaddition at the exocyclic double bond.     

Synthesis and reactivity of 3-(2-chloroalkyl)-2,2-dihaloaziridines

3-(2-Chloroalkyl)-2,2-dihaloaziridines were synthesized via cycloaddition of dihalocarbenes to the CN double bond of β-chloroimines. Under the action of Lewis acids or HCl, N-C³ bond cleavage occurred, giving rise to N-substituted 2,4-dichloro-3,3-dimethylbutanamides, which were further converted to 3-chloropyrrolidin-2-ones under alkaline conditions. When 2,2-dichloro-3-(2-chloro-1,1-dimethylethyl)-1-phenylaziridine was reacted with sodium methoxide, aziridine ring opening with N-C² bond cleavage took place, leading to methyl 4-chloro-3,3-dimethyl-2-(phenylamino)butanoate.     

Efficient microwave-assisted three-component one-pot preparation of 1-aryl-4-(2-acetoxyethyl)piperazines and 1-aryl-4-(2-acetoxyethyl)piperidines

A highly efficient one-pot, three-component microwave-assisted procedure has been developed for the preparation of 1-(para-substituted-aryl)-4-(2-acetoxyethyl)piperazines and 1-(para-substituted-aryl)-4-(2-acetoxyethyl)piperidines. Microwave-accelerated heating of electron-deficient aryl halides and potassium acetate with either 1,4-diazabicyclo[2.2.2]octane (DABCO) or quinuclidine at 180 °C for 120 min provided the title products in good yields and with general substrate scope. Similarly, subjection of potassium pthalimide instead of potassium acetate to the same conditions provided good yields of 1-arylpiperazines and 1-arylpiperidines containing a 2-phthalimidoethyl substituent at the C-4 position.     

Microwave-assisted synthesis of 4-chloro-N-(naphthalen-1-ylmethyl)-5-(3-(piperazin-1-yl)phenoxy)thiophene-2-sulfonamide (B-355252): a new potentiator of Nerve Growth Factor (NGF)-induced neurite outgrowth

The synthesis of 4-chloro-N-(naphthalen-1-ylmethyl)-5-(3-(piperazin-1-yl)phenoxy)thiophene-2-sulfonamide (B-355252) using an MW-assisted nucleophilic aromatic substitution (S_NAr) reaction will be discussed. Utilization of this method allowed for the rapid generation of B-355252 heteroaryl ether core structure in the presence of cesium carbonate in dimethylformamide or tripotassium phosphate in N-methyl-2-pyrrolidone in 94% yield. Evaluation of B-355252 enhancement of nerve growth factor’s ability to stimulate neurite outgrowths was determined using NS-1 cells.     

Ring opening of 2-(bromomethyl)-1-sulfonylaziridines towards 1,3-heteroatom substituted 2-aminopropane derivatives

1,3-Heteroatom substituted 2-aminopropane derivatives have been prepared from 2-(bromomethyl)-1-sulfonylaziridines for the first time using sodium azide or different potassium phenoxides in water in the presence of silica gel. The applicability of 1-arenesulfonyl-2-(bromomethyl)aziridines for the synthesis of functionalized sulfonamides has also been demonstrated towards different 1,3-dialkoxy-2-(tosylamino)propanes and 1,3-dialkylthio-2-(tosylamino)propanes upon treatment with the appropriate sodium alkoxide or sodium alkylthiolate in the corresponding alcohol or in methanol, respectively.     

A study of the hydration of the alkali metal ions in aqueous solution

The hydration of the alkali metal ions in aqueous solution has been studied by large angle X-ray scattering (LAXS) and double difference infrared spectroscopy (DDIR). The structures of the dimethyl sulfoxide solvated alkali metal ions in solution have been determined to support the studies in aqueous solution. The results of the LAXS and DDIR measurements show that the sodium, potassium, rubidium and cesium ions all are weakly hydrated with only a single shell of water molecules. The smaller lithium ion is more strongly hydrated, most probably with a second hydration shell present. The influence of the rubidium and cesium ions on the water structure was found to be very weak, and it was not possible to quantify this effect in a reliable way due to insufficient separation of the O-D stretching bands of partially deuterated water bound to these metal ions and the O-D stretching bands of the bulk water. Aqueous solutions of sodium, potassium and cesium iodide and cesium and lithium hydroxide have been studied by LAXS and M-O bond distances have been determined fairly accurately except for lithium. However, the number of water molecules binding to the alkali metal ions is very difficult to determine from the LAXS measurements as the number of distances and the temperature factor are strongly correlated. A thorough analysis of M-O bond distances in solid alkali metal compounds with ligands binding through oxygen has been made from available structure databases. There is relatively strong correlation between M-O bond distances and coordination numbers also for the alkali metal ions even though the M-O interactions are weak and the number of complexes of potassium, rubidium and cesium with well-defined coordination geometry is very small. The mean M-O bond distance in the hydrated sodium, potassium, rubidium and cesium ions in aqueous solution have been determined to be 2.43(2), 2.81(1), 2.98(1) and 3.07(1) ?, which corresponds to six-, seven-, eight- and eight-coordination. These coordination numbers are supported by the linear relationship of the hydration enthalpies and the M-O bond distances. This correlation indicates that the hydrated lithium ion is four-coordinate in aqueous solution. New ionic radii are proposed for four- and six-coordinate lithium(I), 0.60 and 0.79 ?, respectively, as well as for five- and six-coordinate sodium(I), 1.02 and 1.07 ?, respectively. The ionic radii for six- and seven-coordinate K(+), 1.38 and 1.46 ?, respectively, and eight-coordinate Rb(+) and Cs(+), 1.64 and 1.73 ?, respectively, are confirmed from previous studies. The M-O bond distances in dimethyl sulfoxide solvated sodium, potassium, rubidium and cesium ions in solution are very similar to those observed in aqueous solution.