Intramolecular alkyl phosphine dehydrogenation in cationic rhodium complexes of tris(cyclopentylphosphine)

[Rh(nbd)(PCyp(3))(2)][BAr(F) (4)] (1) [nbd = norbornadiene, Ar(F) = C(6)H(3)(CF(3))(2), PCyp(3) = tris(cyclopentylphosphine)] spontaneously undergoes dehydrogenation of each PCyp(3) ligand in CH(2)Cl(2) solution to form an equilibrium mixture of cis-[Rh{PCyp(2)(eta(2)-C(5)H(7))}(2)][BAr(F) (4)] (2 a) and trans-[Rh{PCyp(2)(eta(2)-C(5)H(7))}(2)][BAr(F) (4)] (2 b), which have hybrid phosphine-alkene ligands. In this reaction nbd acts as a sequential acceptor of hydrogen to eventually give norbornane. Complex 2 b is distorted in the solid-state away from square planar. DFT calculations have been used to rationalise this distortion. Addition of H(2) to 2 a/b hydrogenates the phosphine-alkene ligand and forms the bisdihydrogen/dihydride complex [Rh(PCyp(3))(2)(H)(2)(eta(2)-H(2))(2)][BAr(F) (4)] (5) which has been identified spectroscopically. Addition of the hydrogen acceptor tert-butylethene (tbe) to 5 eventually regenerates 2 a/b, passing through an intermediate which has undergone dehydrogenation of only one PCyp(3) ligand, which can be trapped by addition of MeCN to form trans-[Rh{PCyp(2)(eta(2)-C(5)H(7))}(PCyp(3))(NCMe)][BAr(F) (4)] (6). Dehydrogenation of a PCyp(3) ligand also occurs on addition of Na[BAr(F) (4)] to [RhCl(nbd)(PCyp(3))] in presence of arene (benzene, fluorobenzene) to give [Rh(eta(6)-C(6)H(5)X){PCyp(2)(eta(2)-C(5)H(7))}][BAr(F) (4)] (7: X = F, 8: X = H). The related complex [Rh(nbd){PCyp(2)(eta(2)-C(5)H(7))}][BAr(F) (4)] 9 is also reported. Rapid ( approximately 5 minutes) acceptorless dehydrogenation occurs on treatment of [RhCl(dppe)(PCyp(3))] with Na[BAr(F) (4)] to give [Rh(dppe){PCyp(2)(eta(2)-C(5)H(7))}][BAr(F) (4)] (10), which reacts with H(2) to afford the dihydride/dihydrogen complex [Rh(dppe)(PCyp(3))(H)(2)(eta(2)-H(2))][BAr(F) (4)] (11). Competition experiments using the new mixed alkyl phosphine ligand PCy(2)(Cyp) show that [RhCl(nbd){PCy(2)(Cyp)}] undergoes dehydrogenation exclusively at the cyclopentyl group to give [Rh(eta(6)-C(6)H(5)X){PCy(2)(eta(2)-C(5)H(7))}][BAr(F) (4)] (17: X = F, 18: X = H). The underlying reasons behind this preference have been probed using DFT calculations. All the complexes have been characterised by multinuclear NMR spectroscopy, and for 2 a/b, 4, 6, 7, 8, 9 and 17 also by single crystal X-ray diffraction.     

Dynamics of a cis-dihydrogen/hydride complex of iridium

Insertion of CS2 into one of the Ir-H bonds of [Ir(H)5(PCy3)2] takes place to afford the dihydrido dithioformate complex cis-[Ir(H)2(eta2-S2CH)(PCy3)2] accompanied by the elimination of H2. Protonation of the dithioformate complex using HBF4.Et2O gives cis-[Ir(H)(eta2-H2)(eta2-S2CH)(PCy3)2][BF4] wherein the H atom undergoes site exchange between the dihydrogen and the hydride ligands. The dynamics was found to be so extremely rapid with respect to the NMR time scale that the barrier to exchange could not be measured. Partial deuteration of the hydride ligands resulted in a J(H,D) of 6.5 and 7.7 Hz for the H2D and the HD2 isotopomers of cis-[Ir(H)(eta2-H2)(eta2-S2CH)(PCy3)2][BF4], respectively. The H-H distance (d(HH)) for this complex has been calculated to be 1.05 A, which can be categorized under the class of elongated dihydrogen complexes. The cis-[Ir(H)(eta2-H2)(eta2-S2CH)(PCy3)2][BF4] complex undergoes substitution of the bound H2 moiety with CH(3)CN and CO resulting in new hydride derivatives, cis-[Ir(H)(L)(eta2-S2CH)(PCy3)2][BF4] (L = CH3CN, CO). Reaction of cis-[Ir(H)2(eta2-S2CH)(PCy3)2] with electrophilic reagents such as MeOTf and Me3SiOTf afforded a new hydride aquo complex cis-[Ir(H)(H2O)(eta2-S2CH)(PCy3)2][OTf] via the elimination of CH4 and Me3SiH, respectively, followed by the binding of a water molecule (present in trace quantities in the solvent) to the iridium center. The X-ray crystal structures of cis-[Ir(H)2(eta2-S2CH)(PCy3)2] and cis-[Ir(H)(H2O)(eta2-S2CH)(PCy3)2][OTf] have been determined.     

Metal nitrosyl reactivity: Acetonitrile-promoted insertion of an alkylidene into a nitrosyl ligand with fission of the NO bond

Treatment of the complexes [Re(NO)2(PR3)2][BAr(F)4] (R = Cy, 1 a; R = iPr, 1 b) with phenyldiazomethane gave the cationic benzylidene species [Re{CH(C6H5)}(NO)2(PR3)2][BAr(F)4] (2 a and 2 b) in good yields. Upon reaction of 2 a and 2 b with acetonitrile, the consecutive formation of [Re(N[triple bond]CCH3)(N[triple bond]CPh)(NO)(OC(CH3)=NH)(PR3)][BAr(F)4] (3 a and 3 b) and [Re(NCCH3)(OC{CH3}NH{C6H5})(NO)(PR3)2][BAr(F)4] (4 a and 4 b) was observed. The proposed reaction sequence involves the coupling of coordinated NO, carbene and acetonitrile molecules to yield the (1Z)-N-[imino(phenyl)methyl]ethanimidate ligand. The coupling of the nitrosyl and the benzylidene is anticipated to occur first, forming an oximate species. The subsequent acetonitrile addition can be envisaged as a heteroene reaction of the oximate and the acetonitrile ligand yielding 3 a and 3 b, which in turn can cyclise and undergo a prototropic shift initiated by an internal attack of the ethaneimidate ligand on the benzonitrile moiety to afford 4 a and 4 b.     

(iPr3P)6Rh6H12]2+: a high-hydride content octahedron that bridges the gap between late and early transition metal clusters

Treatment of [(iPr3P)2Rh(nbd)][Y] {nbd = norbornadiene, Y = B{3,5-(CF3)2C6H3}4- [B(ArF)4] or 1-H-closo-CB11Me11-} with H2 (ca. 4 atm) results in the isolation, in moderate yield, of the octahedral cluster complex [(iPr3P)6Rh6H12][Y]2 1. The cluster (for both anions) has been characterized by NMR, mass spectroscopy, and X-ray crystallography. These show 1 to have 12 edge-bridging hydrogen atoms, and the structure bears more resemblance to clusters of the early transition metals with pi-donor ligands than those of the late transition metals with pi-acceptor ligands. Intermediate complexes on the route to 1, namely, the nonclassical dihydrogen complexes [(iPr3P)2Rh(H)2(eta2-H2)x][B(ArF)4] (x = 1 or 2), have been observed spectroscopically. The high hydride content of 1 makes it a possible model for nanocluster colloidal Rh(0) catalysts that are used in olefin and arene hydrogenation.     

Probing the catalytic potential of chloro nitrosyl rhenium(I) complexes

The reduction of the mononitrosyl Re(II) salt [NMe(4)](2)[ReCl(5)(NO)] (1) with zinc in acetonitrile afforded the Re(i) dichloride complex [ReCl(2)(NO)(CH(3)CN)(3)] (2). Subsequent ligand substitution reactions with PCy(3), PiPr(3) and P(p-tolyl)(3) afforded the bisphosphine Re(i) complexes [ReCl(2)(NO)(PR(3))(2)(CH(3)CN)] (3, R = Cy a, iPr b, p-tolyl c) in good yields. The acetonitrile ligand in 3 is labile, permitting its replacement with H(2) (1 bar) to afford the dihydrogen Re(I) complexes [ReCl(2)(NO)(PR(3))(2)(η(2)-H(2))] (4, R = Cy a, iPr b). The catalytic activity of 2, 3 and 4 in hydrogen-related catalyses including dehydrocoupling of Me(2)NH·BH(3), dehydrogenative silylation of styrenes, and hydrosilylation of ketones and aryl aldehydes were investigated, with the main focus on phosphine and halide effects. In the dehydrocoupling of Me(2)NH·BH(3), the phosphine-free complex 2 exhibits the same activity as the bisphosphine-substituted systems. In the dehydrogenative silylation of styrenes, 3a and 4a bearing PCy(3) ligands exhibit high catalytic activities. Monochloro Re(I) hydrides [Re(Cl)(H)(NO)(PR(3))(2)(CH(3)CN)] (5, R = Cy a, iPr b) were proven to be formed in the initiation pathway. The phosphine-free complex 2 showed in dehydrogenative silylations even higher activity than the bisphosphine derivatives, which further emphasizes the importance of a facile phosphine dissociation in the catalytic process. In the hydrosilylation of ketones and aryl aldehydes, at least one rhenium-bound phosphine is required to ensure high catalytic activity.     

Generation and reactions of ruthenium phosphido complexes [(eta5-C5H5)Ru(PR'3)2(PR2)]: remarkably high phosphorus basicities and applications as ligands for palladium-catalyzed Suzuki cross-coupling reactions

Reactions of [(eta5-C5H5)Ru(PR'3)2(Cl)] with NaBAr(F) [BAr(F)-=B{3,5-[C6H3(CF3)2]}4-; PR'3=PEt3 or 1/2Et2PCH2CH2PEt2) (depe)] and PR2H (R=Ph, a; tBu, b; Cy, c) in C6H5F, or of related cationic Ru(N2) complexes with PR2H in C6H5F, gave the secondary phosphine complexes [(eta5-C5H5)Ru(PR'3)2(PR2H)]+ BAr(F)- (PR'3=PEt3, 3 a-c; 1/2depe, 4 a,b) in 65-91 % yields. Additions of tBuOK (3 a, 4 a; [D6]acetone) or NaN(SiMe3)2 (3 b,c, 4 b; [D8]THF) gave the title complexes [(eta5-C5H5)Ru(PEt3)2(PR2)] (5 a-c) and [(eta5-C5H5)Ru(depe)(PR2)] (6 a,b) in high spectroscopic yields. These complexes were rapidly oxidized in air; with 5 a, [(eta5-C5H5)Ru(PEt3)2{P(=O)Ph2}] was isolated (>99 %). The reaction of 5 a and elemental selenium yielded [(eta5-C5H5)Ru(PEt3)2{P(=Se)Ph2}] (70 %); selenides from 5 c and 6 a were characterized in situ. Competitive deprotonation reactions showed that 5 a is more basic than the rhenium analog [(eta5-C5H5)Re(NO)(PPh3)(PPh2)], and that 6 b is more basic than PtBu3 and P(iPrNCH2CH2)3N. The latter is one of the most basic trivalent phosphorus compounds [pK(a)(acetonitrile) 33.6]. Complexes 5 a-c and 6 b are effective ligands for Pd(OAc)2-catalyzed Suzuki coupling reactions: 6 b gave a catalyst nearly as active as the benchmark organophosphine PtBu3; 5 a, with a less bulky and electron-rich PR2 moiety, gave a less active catalyst. The reaction of 5 a and [(eta3-C3H5)Pd(NCPh)2]+ BF4- gave the bridging phosphido complex [(eta5-C5H5)Ru(PEt3)2(PPh2)Pd(NCPh)(eta3-C3H5)]+ BAr(F)- in approximately 90 % purity. The crystal structure of 4 a is described, as well as substitution reactions of 3 b and 4 b.     

Cationic rhodium mono-phosphine fragments partnered with carborane monoanions [closo-CB11H6X6]- (X = H, Br). Synthesis, structures and reactivity with alkenes

Addition of the new phosphonium carborane salts [HPR(3)][closo-CB(11)H(6)X(6)] (R = (i)Pr, Cy, Cyp; X = H 1a-c, X = Br 2a-c; Cy = C(6)H(11), Cyp = C(5)H(9)) to [Rh(nbd)(mu-OMe)](2) under a H(2) atmosphere gives the complexes Rh(PR(3))H(2)(closo-CB(11)H(12)) 3 (R = (i)Pr 3a, Cy 3b, Cyp 3c) and Rh(PR(3))H(2)(closo-CB(11)H(6)Br(6)) 4 (R = (i)Pr 4a, Cy 4b, Cyp 4c). These complexes have been characterised spectroscopically, and for 4b by single crystal X-ray crystallography. These data show that the {Rh(PR(3))H(2)}(+) fragment is interacting with the lower hemisphere of the [closo-CB(11)H(6)X(6)](-) anion on the NMR timescale, through three Rh-H-B or Rh-Br interactions for complexes 3 and 4 respectively. The metal fragment is fluxional over the lower surface of the cage anion, and mechanisms for this process are discussed. Complexes 3a-c are only stable under an atmosphere of H(2). Removing this, or placing under a vacuum, results in H(2) loss and the formation of the dimer species Rh(2)(PR(3))(2)(closo-CB(11)H(12))(2) 5a (R = (i)Pr), 5b (R = Cy), 5c (R = Cyp). These dimers have been characterised spectroscopically and for 5b by X-ray diffraction. The solid state structure shows a dimer with two closely associated carborane monoanions surrounding a [Rh(2)(PCy(3))(2)](2+) core. One carborane interacts with the metal core through three Rh-H-B bonds, while the other interacts through two Rh-H-B bonds and a direct Rh-B link. The electronic structure of this molecule is best described as having a dative Rh(I) --> Rh(III), d(8)--> d(6), interaction and a formal electron count of 16 and 18 electrons for the two rhodium centres respectively. Addition of H(2) to complexes 5a-c regenerate 3a-c. Addition of alkene (ethene or 1-hexene) to 5a-c or 3a-c results in dehydrogenative borylation, with 1, 2, and 3-B-vinyl substituted cages observed by ESI-MS: [closo-(RHC[double bond, length as m-dash]CH)(x)CB(11)H(12-x)](-)x = 1-3, R = H, C(4)H(9). Addition of H(2) to this mixture converts the B-vinyl groups to B-ethyl; while sequential addition of 4 cycles of ethene (excess) and H(2) to CH(2)Cl(2) solutions of 5a-c results in multiple substitution of the cage (as measured by ESI-MS), with an approximately Gaussian distribution between 3 and 9 substitutions. Compositionally pure material was not obtained. Complexes 4a-c do not lose H(2). Addition of tert-butylethene (tbe) to 4a gives the new complex Rh(P(i)Pr(3))(eta(2)-H(2)C=CH(t)Bu)(closo-CB(11)H(6)Br(6)) 6, characterised spectroscopically and by X-ray diffraction, which show coordination of the alkene ligand and bidentate coordination of the [closo-CB(11)H(6)Br(6)](-) anion. By contrast, addition of tbe to 4b or 4c results in transfer dehydrogenation to give the rhodium complexes Rh{PCy(2)(eta(2)-C(6)H(9))}(closo-CB(11)H(6)Br(6)) 7 and Rh{PCyp(2)(eta(2)-C(5)H(7))}(closo-CB(11)H(6)Br(6)) 9, which contain phosphine-alkene ligands. Complex has been characterised crystallographically.     

C-H Activation and C-C coupling of arenes by cationic Pt(II) complexes

The synthesis and characterization of cationic platinum complexes of the type [(R(2)PC(2)H(4)PR(2))PtMe(OEt(2))]BAr(F) (R = Cy, Et) are reported. These electrophilic platinum cations are found to react quantitatively with arenes (benzene, toluene) at room temperature by undergoing intermolecular C-H activation with concomitant C-C coupling to generate complexes of the type [[Pt(R(2)PC(2)H(4)PR(2))](2)(mu-eta(3):eta(3)-biaryl)][BAr(F)](2). The dianionic biaryl ligands in these compounds exhibit a rare mu-eta(3):eta(3)-bis-allyl bonding mode and can be removed from the complex with stoichiometric oxidants to generate the free biaryl and [(R(2)PC(2)H(4)PR(2))Pt(mu-X)](2)[BAr(F)](2) (R = Cy, Et; X = Cl, I). The cationic platinum complexes [(R(2)PC(2)H(4)PR(2))PtMe(OEt(2))]BAr(F) (R = Cy, Et) are also quite reactive with water, forming the bridging hydroxide complexes [(R(2)PC(2)H(4)PR(2))Pt(mu-OH)](2)[BAr(F)](2) (R = Cy, Et). A possible mechanism is proposed for the C-C coupling reaction based upon the structures of these bridging biphenyl complexes, which provides a new perspective for the related palladium-catalyzed oxidative coupling of arenes to form biaryls.     

Synthesis of eta1-borazine complexes of palladium and platinum

The eta(1)-borazine complexes trans-[(Cy(3)P)(2)M(Br)(Br(2)B(3)N(3)H(3))] (Cy = cyclohexyl) were prepared by oxidative addition of a B-Br bond of (BrBNH)(3) to [M(PCy(3))(2)] (M = Pd, Pt). Furthermore the platinum compound was converted into the T-shaped cationic complex trans-[(Cy(3)P)(2)Pt(Br(2)B(3)N(3)H(3))][BAr(f)(4)] [Ar(f) = 3,5-(CF(3))(2)C(6)H(3)] by addition of Na[BAr(f)(4)].     

Synthesis, characterization, and reactivity of Fe complexes containing cyclic diazadiphosphine ligands: the role of the pendant base in heterolytic cleavage of H2

The iron complexes CpFe(P(Ph)(2)N(Bn)(2))Cl (1-Cl), CpFe(P(Ph)(2)N(Ph)(2))Cl (2-Cl), and CpFe(P(Ph)(2)C(5))Cl (3-Cl)(where P(Ph)(2)N(Bn)(2) is 1,5-dibenzyl-1,5-diaza-3,7-diphenyl-3,7-diphosphacyclooctane, P(Ph)(2)N(Ph)(2) is 1,3,5,7-tetraphenyl-1,5-diaza-3,7-diphosphacyclooctane, and P(Ph)(2)C(5) is 1,4-diphenyl-1,4-diphosphacycloheptane) have been synthesized and characterized by NMR spectroscopy, electrochemical studies, and X-ray diffraction. These chloride derivatives are readily converted to the corresponding hydride complexes [CpFe(P(Ph)(2)N(Bn)(2))H (1-H), CpFe(P(Ph)(2)N(Ph)(2))H (2-H), CpFe(P(Ph)(2)C(5))H (3-H)] and H(2) complexes [CpFe(P(Ph)(2)N(Bn)(2))(H(2))]BAr(F)(4), [1-H(2)]BAr(F)(4), (where BAr(F)(4) is B[(3,5-(CF(3))(2)C(6)H(3))(4)](-)), [CpFe(P(Ph)(2)N(Ph)(2))(H(2))]BAr(F)(4), [2-H(2)]BAr(F)(4), and [CpFe(P(Ph)(2)C(5))(H(2))]BAr(F)(4), [3-H(2)]BAr(F)(4), as well as [CpFe(P(Ph)(2)N(Bn)(2))(CO)]BAr(F)(4), [1-CO]Cl. Structural studies are reported for [1-H(2)]BAr(F)(4), 1-H, 2-H, and [1-CO]Cl. The conformations adopted by the chelate rings of the P(Ph)(2)N(Bn)(2) ligand in the different complexes are determined by attractive or repulsive interactions between the sixth ligand of these pseudo-octahedral complexes and the pendant N atom of the ring adjacent to the sixth ligand. An example of an attractive interaction is the observation that the distance between the N atom of the pendant amine and the C atom of the coordinated CO ligand for [1-CO]BAr(F)(4) is 2.848 ?, considerably shorter than the sum of the van der Waals radii of N and C atoms. Studies of H/D exchange by the complexes [1-H(2)](+), [2-H(2)](+), and [3-H(2)](+) carried out using H(2) and D(2) indicate that the relatively rapid H/D exchange observed for [1-H(2)](+) and [2-H(2)](+) compared to [3-H(2)](+) is consistent with intramolecular heterolytic cleavage of H(2) mediated by the pendant amine. Computational studies indicate a low barrier for heterolytic cleavage of H(2). These mononuclear Fe(II) dihydrogen complexes containing pendant amines in the ligands mimic crucial features of the distal Fe site of the active site of the [FeFe]-hydrogenase required for H-H bond formation and cleavage.     

Vinyl and carbene ruthenium(II) complexes from hydridoruthenium(II) precursors

The reactions of the hydrido compounds [RuHCl(CO)(L)2][L = PiPr3 (1), PCy3 (2)] with HC(triple bond)CR (R = H, Ph, tBu) afforded by insertion of the alkyne into the Ru-H bond the corresponding vinyl complexes [RuCl(CHCHR)(CO)(L)2], 3-8, which upon protonation with HBF4 gave the cationic five-coordinated ruthenium carbenes [RuCl(CHCH2R)(CO)(L)2]BF4, 9-14. Subsequent reactions of the carbene complexes with PR3(R = Me, iPr) and CH3CN led either to deprotonation and re-generation of the vinyl compounds or to cleavage of the ruthenium-carbene bond and the formation of the six-coordinated complexes [RuCl(CO)(CH3CN)2(PiPr3)2]BF4, 17, and [RuH(CO)(CH3CN)2(PiPr3)2]X, 18a,b. The acetato derivative [RuH(2-O2CCH3)(CO)(PCy3)2], 19, also reacted with acetylene and phenylacetylene by insertion to yield the related vinyl complexes [Ru(CHCHR)(kappa2-O2CCH3)(CO)(PCy3)2], 20, 21, of which that with R = H was protonated with HBF4 to yield the corresponding cationic ruthenium carbene 22. With [RuHCl(H2)(PCy3)2], 25, as the starting material, the five-coordinated chloro(hydrido)ruthenium(II) compounds [RuHCl(PCy3)(dppf)], 26(dppf = [Fe(eta5-C5H4PPh2)2]), [RuHCl[Sb(CH2Ph)3](PCy3)2], 27, and [RuHCl(CH3CN)(PCy3)2], 30, were prepared. The reactions of 27 with HCCR (R = H, Ph) gave the hydrido(vinylidene) complexes [RuHCl(CCHR)(PCy3)2], 28 and 29, whereas treatment of 30 with HC(triple bond)CPh afforded the vinyl compound [RuCl(CHCHPh)(CH3CN)(PCy3)2], 31. The molecular structures of 11(R = tBu, L = PiPr3) and 26 were determined crystallographically.     

Photochemical reactions of [CH2(eta5-C5H4)2][Rh(C2H4)2]2 with silanes: evidence for Si-C and C-H activation pathways

Photochemical reaction of [CH2(eta5-C5H4)2][Rh(C2H4)2]2 1 with dmso led to the stepwise formation of [CH2(eta5-C5H4)2][Rh(C2H4)2][Rh(C2H4)(dmso)] 2a and [CH2(eta5-C5H4)2][Rh(C2H4)(dmso)]2 2b. Photolysis of 1 with vinyltrimethylsilane ultimately yields three isomeric products of [CH2(eta5-C5H4)2][Rh(CH2=CHSiMe3)2]2, 3a, 3b and 3c which are differentiated by the relative orientations of the vinylsilane. When this reaction is undertaken in d6-benzene, H/D exchange between the solvent and the alpha-proton of the vinylsilane is revealed. In addition evidence for two isomers of the solvent complex [CH2(eta5-C5H4)2][Rh(C2H4)2][Rh(C2H4)(eta2-toluene)] was obtained in these and related experiments when the photolysis was completed at low temperature without substrate, although no evidence for H/D exchange was observed. Photolysis of 1 with Et3SiH yielded the sequential substitution products [CH2(eta5-C5H4)2][Rh(C2H4)2][Rh(C2H4)(SiEt3)H] 4a, [CH2(eta5-C5H4)2][Rh(C2H4)(SiEt3)H]2 4b, [CH2(eta5-C5H4)2][Rh(C2H4)(SiEt3)H][Rh(SiEt3)2(H)2] 4c and [CH2(eta5-C5H4)2][Rh(SiEt3)2(H)2]2 4d; deuteration of the alpha-ring proton sites, and all the silyl protons, of 4d was demonstrated in d6-benzene. This reaction is further complicated by the formation of two Si-C bond activation products, [CH2(eta5-C5H4)2][RhH(mu-SiEt2)]2 5 and [CH2(eta5-C5H4)2][(RhEt)(RhH)(mu-SiEt2)2] 6. Complex 5 was also produced when 1 was photolysed with Et2SiH2. When the photochemical reactions with Et3SiH were repeated at low temperatures, two isomers of the unstable C-H activation products, the vinyl hydrides [CH2(eta5-C5H4)2][{Rh(SiEt3)H}{Rh(SiEt3)}(mu-eta1,eta2-CH=CH2)] 7a and 7b, were obtained. Thermally, 4c was shown to form the ring substituted silyl migration products [(eta5-C5H4)CH2(C5H3SiEt3)][Rh(SiEt3)2(H)2]2 8 while 4b formed [CH2(C5H3SiEt3)2][Rh(SiEt3)2(H)2]2 (9a and 9b) upon reaction with excess silane. The corresponding photochemical reaction with Me3SiH yielded the expected products [CH2(eta5-C5H4)2][Rh(C2H4)2][Rh(C2H4)(SiMe3)H] 10a, [CH2(eta5-C5H4)2][Rh(C2H4)(SiMe3)H]2 10b, [CH2(eta5-C5H4)2][Rh(C2H4)(SiMe3)H][Rh(SiMe3)2(H)2] 10c and [CH2(eta5-C5H4)2][Rh(SiMe3)2(H)2]2 10d. However, three Si-C bond activation products, [CH2(eta5-C5H4)2][(RhMe)(RhH)(mu-SiMe2)2] 11, [CH2(eta5-C5H4)2][(Rh{SiMe3})(RhMe)(mu-SiMe2)2] 12 and [CH2(eta5-C5H4)2][(Rh{SiMe3})(RhH)(mu-SiMe2)2] 13 were also obtained in these reactions.     

Ligand controlled dioxygen oxidation of rhenium nitrosyl complexes

The addition of an excess of phenyldiazomethane to chlorobenzene solutions of the cationic dinitrosyl bisphosphine rhenium(-I) complexes [Re(NO)2(PR3)2][BAr(F)4] (R = Cy 1a, R = (i)Pr 1b) gave the corresponding benzylidene complexes [Re{=CH(C6H5)}(NO)2(PR3)2][BAr(F)4] (2a and 2b) in good yields. The treatment of 2b with dioxygen resulted in the oxidation of one of the nitrosyl ligands into the corresponding eta2-nitrito (3b) and nitrato complexes (4b) both in the solid state and in solution. In the case of the tricyclohexylphosphine derivative 2a the analogous conversion was not observed. A mechanism for the reaction of 2b with O2 is proposed which is based on an initial SET to the O2 molecule and subsequent formation of a peroxynitrite complex followed by the formation of a dinuclear mU-N2O4 intermediate. This in turn would undergo fission of the peroxo bond to afford 3b. A related sequence of steps is anticipated for the transformation of 3b to 4b. Furthermore, a similar mechanism seems reasonable for the seemingly topochemical reaction of 2b to 3b and 4b in the solid state. The initial SET to dioxygen and subsequent formation of the peroxynitrite complex is supported by DFT calculations on the trimethylphosphine model complexes [Re=CH{C6H5})(NO)2(PMe3)2]n+ (n = 1 and 2).     

Dihydrogen complexes of iridium and rhodium

A series of iridium and rhodium pincer complexes have been synthesized and characterized: [(POCOP)Ir(H)(H(2))] [BAr(f)(4)] (1-H(3)), (POCOP)Rh(H(2)) (2-H(2)), [(PONOP)Ir(C(2)H(4))] [BAr(f)(4)] (3-C(2)H(4)), [(PONOP)Ir(H)(2))] [BAr(f)(4)] (3-H(2)), [(PONOP)Rh(C(2)H(4))] [BAr(f)(4)] (4-C(2)H(4)) and [(PONOP)Rh(H(2))] [BAr(f)(4)] (4-H(2)) (POCOP = κ(3)-C(6)H(3)-2,6-[OP(tBu)(2)](2); PONOP = 2,6-(tBu(2)PO)(2)C(5)H(3)N; BAr(f)(4) = tetrakis(3,5-trifluoromethylphenyl)borate). The nature of the dihydrogen-metal interaction was probed using NMR spectroscopic studies. Complexes 1-H(3), 2-H(2), and 4-H(2) retain the H-H bond and are classified as η(2)-dihydrogen adducts. In contrast, complex 3-H(2) is best described as a classical dihydride system. The presence of bound dihydrogen was determined using both T(1) and (1)J(HD) coupling values: T(1) = 14 ms, (1)J(HD) = 33 Hz for the dihydrogen ligand in 1-H(3), T(1)(min) = 23 ms, (1)J(HD) = 32 Hz for 2-H(2), T(1)(min) = 873 ms for 3-H(2), T(1)(min) = 33 ms, (1)J(HD) = 30.1 Hz for 4-H(2).     

Unprecedented ROMP activity of low-valent rhenium-nitrosyl complexes: Mechanistic evaluation of an electrophilic olefin metathesis system

The reaction of [Re(H)(NO)2(PR3)2] complexes (1 a: R = PCy3; 1 b: R = PiPr3) with [H(OEt2)2][BAr(F)4] ([BAr(F)4] = tetrakis{3,5-bis(trifluoromethyl)phenyl}borate) in benzene at room temperature gave the corresponding cations [Re(NO)2(PR3)2][BAr(F)4] (2 a and 2 b). The addition of phenyldiazomethane to benzene solutions of 2 a and 2 b afforded the moderately stable cationic rhenium(I)-benzylidene-dinitrosyl-bis(trialkyl)phosphine complexes 3 a and 3 b as [BAr(F)4]- salts in good yields. The complexes 2 a and 2 b catalyze the ring-opening metathesis polymerization (ROMP) of highly strained nonfunctionalized cyclic olefins to give polymers with relatively high polydispersity indices, high molecular weights and over 80 % Z configuration of the double bonds in the chain backbone. However, these complexes do not show metathesis activity with acyclic olefins. The benzylidene derivatives 3 a and 3 b are almost inactive in ROMP catalysis with norbornene and in olefin metathesis. NMR experiments gave the first hints of the initial formation of carbene complexes from [Re(NO)2(PR3)2][BAr(F)4] (2 a and 2 b) and norbornene. In a detailed mechanistic study ESI-MS/MS measurements provided further evidence that the carbene formation is initiated by a unique reaction sequence where the cleavage of the strained olefinic bond starts with phosphine migration forming a cyclic ylide-carbene complex, capable of undergoing metathesis with alternating rhenacyclobutane formation and cycloreversion reactions ("ylide" route). However, even at an early stage the ROMP propagation route is expected to merge into an "iminate" route by attack by the ylide function on one of the N(NO) atoms followed by phosphine oxide elimination. The formation of phosphine oxide was confirmed by NMR spectroscopy. The proposed mechanism is supported further by detailed DFT calculations.     

High hydride count rhodium octahedra, [Rh6(PR3)6H12][BArF4]2: synthesis, structures, and reversible hydrogen uptake under mild conditions

A new class of transition metal cluster is described, [Rh(6)(PR(3))(6)H(12)][BAr(F)(4)](2) (R = (i)Pr (1a), Cy (2a); BAr(F)(4) = [B{C(6)H(3)(CF(3))(2)}(4)](-)). These clusters are unique in that they have structures exactly like those of early transition metal clusters with edge-bridging pi-donor ligands rather than the structures expected for late transition metal clusters with pi-acceptor ligands. The solid-state structures of 1a and 2a have been determined, and the 12 hydride ligands bridge each Rh-Rh edge of a regular octahedron. Pulsed gradient spin-echo NMR experiments show that the clusters remain intact in solution, having calculated hydrodynamic radii of 9.5(3) A for 1a and 10.7(2) A for 2a, and the formulation of 1a and 2a was unambiguously confirmed by ESI mass spectrometry. Both 1a and 2a take up two molecules of H(2) to afford the cluster species [Rh(6)(P(i)Pr(3))(6)H(16)][BAr(F)(4)](2) (1b) and [Rh(6)(PCy(3))(6)H(16)][BAr(F)(4)](2) (2b), respectively, as characterized by NMR spectroscopy, ESI-MS, and, for 2b, X-ray crystallography using the [1-H-CB(11)Me(11)](-) salt. The hydride ligands were not located by X-ray crystallography, but (1)H NMR spectroscopy showed a 15:1 ratio of hydride ligands, suggesting an interstitial hydride ligand. Addition of H(2) is reversible: placing 1b and 2b under vacuum regenerates 1a and 2a. DFT calculations on [Rh(6)(PH(3))(6)H(x)()](2+) (x = 12, 16) support the structural assignments and also show a molecular orbital structure that has 20 orbitals involved with cluster bonding. Cluster formation has been monitored by (31)P{(1)H} and (1)H NMR spectroscopy, and mechanisms involving heterolytic H(2) cleavage and elimination of [HP(i)Pr(3)](+) or the formation of trimetallic intermediates are discussed.     

Key factors determining the course of methyl iodide oxidative addition to diamidonaphthalene-bridged diiridium(I) and dirhodium(I) complexes

The course of methyl iodide oxidative addition to various nucleophilic complexes, [Ir2(mu-1,8-(NH)2naphth)(CO)2(PiPr3)2] (1), [IrRh(mu-1,8-(NH)2naphth)(CO)2(PiPr3)2] (2), and [Rh2(mu-1,8-(NH)2naphth)(CO)2(PR3)2] (R = iPr, 3; Ph, 4; p-tolyl, 5; Me, 6), has been investigated. The CH3I addition to complex 1 readily affords the diiridium(II) complex [Ir2(mu-1,8-(NH)2naphth)I(CH3)(CO)2(PiPr3)2] (7), which undergoes slow rearrangement to give a thermodynamically stable stereoisomer, 8. The reaction of the Ir-Rh complex 2 gives the ionic compound [IrRh(mu-1,8-(NH)2naphth)(CH3)(CO)2(PiPr3)2]I (10). The dirhodium compounds, 3-5, undergo one-center additions to yield acyl complexes of the formula (Rh2(mu-1,8-(NH)2naphth)I(COCH3)(CO)(PR3)2] (R = iPr, 12; Ph, 13; p-tolyl, 14). The structure of 12 has been determined by X-ray diffraction. Further reactions of these Rh(III)-Rh(I) acyl derivatives with CH3I are productive only for the p-tolylphosphine derivative, which affords the bis-acyl complex [Rh2(mu-1,8-(NH)2naphth)(CH3CO)2I2(P(p-tolyl)3)2] (15). The reaction of the PMe3 derivative, 6, allows the isolation of the bis-methyl complex [Rh2(mu-1,8-(NH)2naphth)(mu-I)(CH3)2(CO)2(PMe3)2]I (16a), which emanates from a double one-center addition. Upon reaction with methyl triflate, the starting materials, 1, 2, 3, and 6, give the isostructural cationic methyl complexes 9, 11, 17, and 18, respectively. The behavior of these cationic methyl compounds toward CH3I, CH3OSO2CF3, and tetrabutylamonium iodide is consistent with the role of these species as intermediates in the SN2 addition of CH3I. Compounds 18 and 17 react with an excess of methyl triflate to give [Rh2(mu-1,8-(NH)2naphth)(mu-OSO2CF3)(CH3)2(CO)2(PMe3)2][CF3SO3] (19) and [Rh2(mu-1,8-(NH)2naphth)(OSO2CF3)(COCH3)(CH3)(CO)(PiPr3)2][CF3SO3] (20), respectively. Upon treatment with acetonitrile, complexes 17 and 18 give the isostructural cationic acyl complexes [Rh2(mu-1,8-(NH)2naphth)(COCH3)(NCCH3)(CO)(PR3)2][CF3SO3] (R = iPr, 21; Me, 22). A kinetic study of the reaction leading to 21 shows that formation of these complexes involves a slow insertion step followed by the fast coordination of the acetonitrile. The variety of reactions found in this system can be rationalized in terms of three alternative reaction pathways, which are determined by the effectiveness of the interactions between the two metal centers of the dinuclear complex and by the steric constraints due to the phosphine ligands.     

Substitution and hydrogenation reactions on rhodium(I)-ethylene complexes of the hydrotris(pyrazolyl)borate ligands T (T = Tp, TpMe2)

The bis(ethylene) Rh species TpMe2Rh(C2H4)2(1*) (TpMe2 = tris(3,5-dimethyl-1-pyrazol-1-yl)hydroborate) has been obtained from [RhCl(C2H4)2]2 and KTpMe2. Complex 1* easily decomposes in solution to give mainly the butadiene species TpMe2Rh(eta74-C4H6). In the solid state its thermal decomposition follows a different course and the allyl TpMe2RhH(syn-C3H4Me) is cleanly obtained as a mixture of exo and endo isomers. The complexes Tp'Rh(C2H4)2 (Tp' = Tp, TpMe2) afford the monosubstituted species Tp'Rh(C2H4)(PR3) upon reaction with PR3 but react differently with L = CO or CNR: the Tp compound gives dinuclear [TpRh]2(mu-L)3 complexes, while, in the case of 1*, TpMe2Rh(C2H4)(L) species are obtained. The ethylene ligand of complexes TpMe2Rh(C2H4)(PR3) is labile, and several peroxo compounds of composition TpMe2Rh(O2)(PR3) have been isolated by their reaction with O2. All the mononuclear Rh(I) complexes are formulated as 18e- trigonal bipyramidal species on the basis of IR and NMR spectroscopic studies. A series of dihydride complexes of Rh(III) of formulation Tp'RhH2(PR3) have been prepared by the hydrogenation of the corresponding ethylene derivatives. Complexes [TpRh]2(mu-CNCy)3, TpMe2Rh(C2H4)(PEt3), and TpMe2Rh(O2)(PEt3) have been further characterized by X-ray diffraction studies.     

Synthesis and reactivity of fluoro complexes: Part 2. Rhodium(I) fluoro complexes with alkene and phosphine ligands. Synthesis of the first isolated rhodium(I) bifluoride complexes. Structure of [Rh3(mu3-OH)2(COD)(3)](HF2) by X-ray powder diffraction

The reaction between [Rh(mu-OH)(COD)](2) (COD = 1,5-cyclooctadiene) and 73% HF in THF gives [Rh(3)(mu(3)-OH)(2)(COD)(3)](HF(2)) (1). Its crystal structure, determined by ab initio X-ray powder diffraction methods (from conventional laboratory data), contains complex trimetallic cations linked together in 1D chains by a mu(3)-OH...F-H-F...HO-mu(3) sequence of strong hydrogen bonds. The complex [Rh(mu-F)(COE)(2)](2) (COE = cyclooctene; 2), prepared by reacting [Rh(mu-OH)(COE)(2)](2) with NEt(3).3HF (3:2), has been characterized. Complex 1 reacts with PR(3) (1:3) to give [RhF(COD)(PR(3))] [R = Ph (3), C(6)H(4)OMe-4 (4), (i)Pr (5), Cy (6)] that can be prepared directly by reacting [Rh(mu-OH)(COD)](2) with 73% HF and PR(3) (1:2:2). The reactions of 1 with PPh(3) or Et(3)P have been studied by NMR spectroscopy at different molar ratios. Complexes [RhF(PEt(3))(3)] (7), [RhF(COD)(PEt(3))] (8), and [RhF(PPh(3))(3)] (9) have been detected. The complex [Rh(F)(NBD)(iPr(3)P)] (NBD = norbornadiene; 10) was prepared by the sequential treatment of [Rh(mu-OMe)(NBD)](2) with 1 equiv of NEt(3).3HF and (i)Pr(3)P. The first isolated bifluoride rhodium(I) complexes [Rh(FHF)(COD)(PR(3))] [R = Ph (11), (i)Pr (12), Cy (13)], obtained by reacting fluoro complexes 3, 5, and 6 with NEt(3).3HF (3:1), have been characterized. The crystal structures of 3 and 11 have been determined.     

Heterobimetallic, cubane-like Mo(3)S(4)M' cluster cores containing the noble metals M' = Ru, Os, Rh, Ir. Unprecedented tri(mu-carbonyl) bridge between ruthenium atoms in [(eta(5)-Cp')(3)Mo(3)S(4)Ru)2(mu-CO)3]2+

Reaction of the methylcyclopentadienyl (Cp') cluster compound [(eta(5)-Cp')(3)Mo(3)S(4)][pts] (pts = p-toluenesulfonate) with noble metal alkene complexes resulted in the formation of four new heterobimetallic cubane-like Mo(3)S(4)M' cluster cores (M' = Ru, Os, Rh, Ir). Thus, reaction with [(1,5-cod)Ru(CO)(3)] or [(1,3-cod)Os(CO)(3)] (cod = cyclooctadiene) afforded [(eta(5)-Cp')(3)Mo(3)S(4)M'(CO)(2)][pts] (M' = Ru: [1][pts]; M' = Os: [2][pts]). When [1][pts] was kept in CH(2)Cl(2)/pentane solution, partial loss of carbonyl ligands occurred and the carbonyl-bridged dicubane cluster [((eta(5)-Cp')(3)Mo(3)S(4)Ru)(2)(mu-CO)(3)][pts](2) was isolated. An X-ray crystal structure revealed the presence of the hitherto unobserved Ru(mu-CO)(3)Ru structural element. The formation of cluster compounds containing Mo(3)S(4)Rh and Mo(3)S(4)Ir cores was achieved in boiling methanol by reacting [(eta(5)-Cp')(3)Mo(3)S(4)][pts] with [M'Cl(cyclooctene)(2)](2) (M' = Rh, Ir) in the presence of PPh(3). In this way [(eta(5)-Cp')(3)Mo(3)S(4)M'Cl(PPh(3))][pts] (M' = Rh, Ir) could be isolated. An alternative route to the Mo(3)S(4)Rh cluster core was found in the reaction of [(eta(5)-Cp')(3)Mo(3)S(4)][pts] with [RhCl(1,5-cod)](2), which yielded [(eta(5)-Cp')(3)Mo(3)S(4)Rh(cod)][pts](2) ([7][pts](2)). Substitution of the cod ligand in [7][pts](2) by 1,3-bis(diphenylphosphanyl)propane (dppp) gave [(eta(5)-Cp')(3)Mo(3)S(4)Rh(dppp)][pts](2).