Combination of TREF, high-temperature HPLC, FTIR and HPer DSC for the comprehensive analysis of complex polypropylene copolymers

A novel, powerful analytical technique, preparative temperature rising elution fractionation (prep TREF)/high-temperature (HT)-HPLC/Fourier transform infrared spectroscopy (FTIR)/high-performance differential scanning calorimetry (HPer DSC)), has been introduced to study the correlation between the polymer chain microstructure and the thermal behaviour of various components in a complex impact polypropylene copolymer (IPC). For the comprehensive analysis of this complex material, in a first step, prep TREF is used to produce less complex but still heterogeneous fractions. These chemically heterogeneous fractions are completely separated by using a highly selective chromatographic separation method—high-temperature solvent gradient HPLC. The detailed structural and thermal analysis of the HPLC fractions was conducted by offline coupling of HT-HPLC with FTIR spectroscopy and a novel DSC method—HPer DSC. Three chemically different components were identified in the mid-elution temperature TREF fractions. For the first component, identified as isotactic polypropylene homopolymer by FTIR, the macromolecular chain length is found to be an important factor affecting the melting and crystallisation behaviour. The second component relates to ethylene–propylene copolymer molecules with varying ethylene monomer distributions and propylene tacticity distributions. For the polyethylene component (last eluting component in all semi-crystalline TREF fractions), it was found that branching produced defects in the long crystallisable ethylene sequences that affected the thermal properties. The different species exhibit distinctively different melting and crystallisation behaviour, as documented by HPer DSC. Using this novel approach of hyphenated techniques, the chain structure and melting and crystallisation behaviour of different components in a complex copolymer were investigated systematically.

Crystallization of carboxylic acid salts in poly(ethylene oxide) oligomers at higher temperatures

Many alkali metal carboxylates when dissolved in poly(ethylene oxide) (PEO) oligomers, are phaseseparated by heating. These were revealed to be the crystals of the initially dissolved corresponding salts from the X-ray diffraction patterns. Some acetate salts achieve the lower limit of the lattice energy for phase separation of ordinary inorganic salts by heating in PEO oligomers. These carboxylate salts were therefore expected to show crystallization behavior in PEO oligomers by heating. The effects of cation size, alkyl chain length and molecular weight of PEO on the solubility are summarized. Negative temperature dependence of solubility of these acetate salts is seen in the PEO oligomers only when the salts have long alkyl chains. The salts containing larger cations needed a longer chain length of PEOs for crystallization by heating. These salts with longer alkyl chains showed positive temperautred dependence in lower molecular weight polyethers, but negative temperature dependence in solubility in PEO with molecular weights higher than 400. In PEO₄₀₀, all the carboxylates with longer alkyl chains were phase separated by heating.     

Reversed-phase high-performance liquid chromatography of some ultra-heterogeneous and covalently-modified proteins from human hair

A new procedure for the fractionation of the heterogeneous cystine-rich proteins from human hair, utilizing reversed-phase high-performance liquid chromatography, is described. Of these proteins 27 fractions have been collected and analyzed for amino acid composition. There seems to be little correlation between the elution order and the hydrophobicity of the fraction constituents except for the late-eluting fractions. Based on the elution profiles and amino acid contents, these fractions appear to fall into four families. The effects of alkyl chain length, flow-rate and gradient slope, as well as various additives to the organic modifier on the separation have also been investigated. A low flow-rate (0.4 ml/min) and a shallow gradient were essential for the separation of these proteins as was the use of short alkyl chain (C4) or medium alkyl chain (C8) columns. However, with the C4 column reproducibility and recovery were excellent.     

Liquid chromatography fractionation with gas chromatography/mass spectrometry and preparative gas chromatography-nuclear magnetic resonance analysis of selected nonylphenol polyethoxylates

Commercial nonylphenol polyethoxylates, designated as NPnEOs, where n is the number of ethoxy groups, comprise a range of ethoxylate groups. According to the starting material nonylphenol, they may also be composed of a complex mix of isomeric nonyl substituents. In order to study more fully the heterogeneity arising from both the ethoxylate and nonyl groups, a mixture of NPnEOs is first fractionated by normal phase liquid chromatography (NPLC) into separate fractions comprising individual ethoxymers, n. Preparative collection of each early elution ethoxymer fraction allows further separation of different isomeric nonyl group components by using analytical gas chromatography/mass spectrometry (GC/MS). The nonyl isomers are not resolved in the NPLC method. The distribution of the isomeric nonyl side chain of different ethoxymers bears close resemblance with each other, and also with the original nonylphenol starting material, although separation efficiency of the nonyl isomers for each ethoxymer decreases with increasing ethoxymer number. Mass spectrometry of the separated isomers display close similarity for presumed equivalent isomers in each fraction, based on elution order of the nonyl isomers. This suggests that each corresponding peak has the same isomer structure. Mass spectra are interpreted based on branching within the nonyl side chain. Preparative GC coupled with MS and nuclear magnetic resonance spectroscopy elucidated the molecular structure of one of the resolved isomers as 4-(1,3-dimethyl-1-propyl-butyl)-phenol diethoxylate.     

Characterization of alkyl polyglycosides by both reversed-phase and normal-phase modes of high-performance liquid chromatography

Alkyl polyglycosides today represent the most important sugar surfactant. Nonionic sugar surfactants produced via different synthetic routes are mixtures of alkyl homologues, oligomers, anomers and isomers. Alkyl homologues and oligomers of alkyl mono- and diglucosides were separated by reversed-phase high-performance liquid chromatography (HPLC) with methanol-water as the mobile phase using a gradient elution. The gradient was optimized in respect to a simultaneous separation of alkyl glycosides according to their alkyl chain length and alkyl polyoxyethylene glucosides with regard to their length of the polyoxyethylene spacer. The separation of alkyl glycosides into alpha- and beta-anomers was carried out by normal-phase HPLC with isooctane-ethyl acetate (60:40, v/v)-2-propanol in the gradient mode. Light scattering detection was used. Matrix-assisted laser desorption ionization time-of-flight mass spectra of alkyl glucosides and dodecyl glucosides with oxyethylene spacer groups are presented.     

High-performance ion-exchange chromatography of oligoribonucleotides using linear and hyperbolic salt gradients

A method for separation and chain length determination of oligo- and polynucleotides by high-performance anion-exchange chromatography was developed, which allows resolution of individual fragments according to their chain length n, up to n approximately 10 by linear gradient of sodium chloride and up to n approximately 30 by an hyperbolic gradient of this salt. The hyperbolic relationship between n and the salt concentration at which elution of the fragment occurs allows determination of the degree of polymerization of oligo- and polynucleotides with unknown n. The method proposed can be used for estimation of the effective charge of nucleic acids with complex structure.     

Chemical synthesis of linear ADP-ribose oligomers up to pentamer and their binding to the oncogenic helicase ALC1

ADP-ribosylation is a pivotal post-translational modification that mediates various important cellular processes producing negatively charged biopolymer, poly (ADP-ribose), the functions of which need further elucidation. Toward this end, the availability of well-defined ADP-ribose (ADPr) oligomers in sufficient quantities is a necessity. In this work, we demonstrate the chemical synthesis of linear ADPr oligomers of defined, increasing length using a modified solid phase synthesis method. An advanced phosphoramidite building block temporarily protected with the base sensitive Fm-group was designed and implemented in the repeating pyrophosphate formation via a P(v)–P(iii) coupling procedure on Tentagel solid support. Linear ADPr oligomers up to a pentamer were successfully synthesized and their affinity for the poly-(ADP-ribose)-binding macrodomain of the human oncogenic helicase and chromatin remodeling enzyme ALC1 was determined. Our data reveal a length-dependent binding manner of the nucleic acid, with larger ADPr oligomers exhibiting higher binding enthalpies for ALC1, illustrating how the activity of this molecular machine is gated by PAR.

We report the synthesis of linear ADPr oligomers of defined length up to a pentamer using an improved solid phase method. Binding study with human oncogenic helicase ALC1 shows that ADPr oligomers bind to ALC1 in a length-dependent manner.     

High‐density polyethylene fractionation with supercritical propane

During the development of column extraction techniques, two methods of separation were identified. The first method is based on altering polymer solubility by varying the ratio of solvent in a solvent/nonsolvent mixture at a constant temperature above the polymer melting point (gradient solvent elution fractionation). This method fractionates polymers according to molecular weight. The second method is based on altering polymer solubility by varying solvent temperature (temperature rising elution fractionation—TREF). TREF fractionates semicrystalline polymers with respect to their crystallizability, independently of molecular weight effects. In the present article, supercritical propane will be used to fractionate a high‐density polyethylene sample by molecular weight and short chain branching. The main advantage of supercritical fluid fractionation is that large polymer fractions with narrow molecular weight distributions (isothermal fractionation) or narrow short chain branching distributions (isobaric fractionation) can be obtained without using hazardous organic chlorinated solvents. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 553–560, 1999     

Properties of fractions of ultradisperse polytetrafluoroethylene soluble in supercritical carbon dioxide

The morphology and structure of FORUM ultradisperse polytetrafluoroethylene fractions obtained via separation of the initial sample with supercritical carbon dioxide are studied by means of scanning and transmission electron microscopy, thermogravimetric and X-ray structural analysis, and IR and NMR spectroscopy. The lowest molecular mass fractions of the ultradisperse polytetrafluoroethylene are involved in the dissolution process, while an increase in production parameters (pressure and temperature) entails gradual involvement of higher molecular mass oligomers in this process. On the basis of the experimental data, the chain length of oligomers soluble in supercritical carbon dioxide is estimated.     

Application of size exclusion chromatography with surfactant eluent to the study of polymer–surfactant interactions: oligomeric and micellar chromatographic effects

Complexation of sodium dodecyl sulphate (SDS) with a wide range of molecular weights of poly(ethylene glycol) (PEG) and poly(ethylene oxide) (PEO) has been studied by size exclusion chromatography using aqueous SDS eluent. A multi-angle laser light scattering detector and a differential refractometer were applied to give direct measurement of the molecular weight of complexes without reference to elution volume, since the latter is not a reliable indicator of the complex size. Background light scattering from micellar eluents hampered quantitative size measurements, but was minimal in sub-micellar eluent, where saturated binding was observed for polymers larger than 1000 g mol⁻¹. Multiple peaks and voids were observed in the elution profiles of low molecular weight polymers (up to a mass of 600 g mol⁻¹) in eluent at micellar concentrations. Several sources contribute to this behavior, including micellar chromatographic separation of the PEG oligomers due to their different distribution coefficients between the micellar and water phases. Preliminary results are reported for distribution coefficients of individual oligomers in a 600 g mol⁻¹ PEG sample. Three distinct binding behaviors are observed with increasing degree of polymerization of PEG: no interaction for small glycols, equilibrium partitioning of intermediate oligomers in and out of micelles, and binding of micelles to the larger polymers.     

等规聚丙烯/聚丁烯-1釜内合金的结构与性能

高分子材料的组成、 组分分布及链结构与宏观性能紧密相关. 因此, 分析多组分釜内合金材料的链结构特点与性能之间的关系至关重要. 采用升温淋洗分级的方法对两种采用序贯两段聚合原位合成的等规聚丙烯/聚丁烯-1(iPP/iPB)釜内合金在-30 ℃~140 ℃温度范围进行分级, 采用核磁共振波谱仪、 傅里叶变换红外光谱仪、 差示扫描量热仪和凝胶渗透色谱仪等表征了级分的链结构及序列分布、 热行为、 分子量(M_w)及分子量分布(M_w/M_n)等. 结果表明iPP/iPB合金主要由5种级分组成, 高等规聚丁烯(iPB)为主要组分, 同时含有少量的丁烯-丙烯嵌段共聚物(PB-b-PP)和等规聚丙烯(iPP)等. 随淋洗温度升高, PB-b-PP级分中PP嵌段长度逐渐增加, PB嵌段长度逐渐减小; 在相同的淋洗温度, 合金B的嵌段共聚物级分中PP嵌段较长且结晶较完善; 合金B中iPB组分及嵌段共聚物组分含量较高, 使得合金B具有较高的拉伸强度、 弯曲强度、 优异的抗冲击性能、 较高的维卡软化温度及较快的晶型转变速率.     

Gel permeation chromatography of polyethylene: Effect of long-chain branching

The effect of long-chain branching on the size of low-density polyethylene molecules in solution is demonstrated through solution viscosity and molecular weight measurements on fractionated samples. These well-characterized fractions are analyzed by gel permeation chromatography (GPC), and it is shown that the separation of the polymer molecules by this technique is sensitive to the presence of long-chain branching. By using fractions of branched polyethylene possessing differing degrees of branching, one observes that a single curve is adequate in relating elution volume to molecular weight. This calibration curve is applied in the GPC analysis of a variety of commercial low-density polyethylene resins and it is shown, by comparison with independent osmometric and gradient elution chromatographic data, that realistic values for molecular weight and molecular weight distribution are obtained. The replacement of molecular weight M by the parameter [η]M as a function of elution volume, leads to a single relationship for both linear and branched polyethylenes. This indicates that GPC separation takes place according to the hydrodynamic volumes of the polymer molecules. The comparison of data for polyethylene and polystyrene fractions suggests that this volume dependence of the separation will be observed for other polymer–solvent systems.     

Analysis of aliphatic alcohol ethoxylates in terms of alkyl and ethylene oxide chain lengths by reversed-phase liquid chromatography with evaporative light scattering detection

Aliphatic alcohol ethoxylates are nonionic surfactants which are incorporated in many industrial formulations as complex mixtures of alkyl homologs and ethylene oxide oligomers. Determination of both the homolog and oligomer distributions is required for product control. The proposed method consisted of three reversed-phase liquid chromatographic separation steps carried out on the same C18-bonded silica column. The first step was a preparative one: the sample mixture was fractionated according to the alkyl chain length without discrimination between ethylene oxide oligomers by using methanol-water eluent. The even homologs (EH) were collected together in a single fraction, the odd homologs (OH) in another. In the second and third steps, respectively, EH and OH fractions were separated according to the alkyl chain length and the number of ethylene oxide units simultaneously by changing the mobile phase composition to acetonitrile-water and by using evaporative light scattering detection.     

High-performance affinity chromatography of messenger RNA.

A 50-mer of thymidylic acid, (dT)50, was coupled to silica inside prepacked columns using the N-hydroxysuccinimide chemistry. The resulting (dT)50-silica columns were used to resolve oligomers of adenylic acid, (dA)19-24, and to separate poly(A) mRNA (messenger RNA) from Saccharomyces. Oligomers which differed in length by a single nucleotide base were readily resolved. Using either (dT)50- or (dT)18-silica, poly(A) mRNA could be purified in as little as 8 min. The poly(A) mRNA isolated appeared to be full length and could be used directly for T4 RNA ligase and RNAse A and T1 enzymatic reactions. The (dT)50-silica column was used to fractionate total poly(A) mRNA by tail length. While the separation was primarily due to poly(A) tail length, most fractions appeared to contain multiple tail lengths. Whether this represents an intrinsic feature of the RNA or a limitation of the method is discussed. These studies show that polynucleotides in the kilobase size range can be separated rapidly and with good resolution on DNA-silica.     

Characterization of polysorbate 85, a nonionic surfactant,by liquid chromatography vs. ion mobility separation coupled with tandem mass spectrometry

Liquid chromatography (LC) and ion mobility (IM) separation have been coupled with mass spectrometry (MS) and tandem mass spectrometry (MS²) to characterize a commercially important nonionic surfactant, polysorbate 85. The constituents of this amphiphilic blend contained a sorbitan or isosorbide core that was chain extended with poly(ethylene oxide) (PEO) and partially esterified at the PEO termini with oleic acid or, to a lesser extent, other fatty acids. Using interactive LC in reverse-phase mode, the oligomers of the surfactant were separated according to their hydrophobicity/hydrophilicity balance. On the other hand, IM spectrometry dispersed the surfactant oligomers by their charge and collision cross section (i.e. size/shape). With either separation method, an increased number of fatty ester groups and/or lack of the polar sorbitan (or isosorbide) core led to higher retention/drift times, enabling the separation of isobaric species or species with superimposed isotope patterns, so that their ester content could be conclusively identified by MS². LC–MS and IM–MS permitted the detection of several byproducts besides the major PEO-sorbitan oleate oligomers. LC–MS provides the separation resolution needed for quantitative determination of the degree of esterification. IM–MS, which minimizes analysis time and solvent use, is ideally suitable for a fast, qualitative survey of samples differing in their minor constituents or impurities.     

Composition analysis of poly(ethylene glycol)-poly(L-lactide) diblock copolymer studied by two-dimensional column chromatography

We used two-dimensional column chromatography to analyze the composition of a sample of presumably a diblock copolymer of poly(ethylene glycol) (PEG) and poly(L-lactide) synthesized from monomethoxy-terminated PEG. The first dimension of the separation is phase fluctuation chromatography to prepare fractions that contain various components of the copolymer in different ratios. The second dimension is size-exclusion chromatography, NMR, and HPLC at the critical condition of PEG. The PEG initiator has small amounts of diol-terminated dimeric components. We found that the copolymer sample contains a triblock copolymer and low-molecular-mass components in addition to the main part of the diblock copolymer. The SEC chromatograms show that the main part consists of two components with distinct peak lengths for the PLLA block. The low-molecular-mass components have a broad distribution in chemical composition. Phase fluctuation chromatography enriched the triblock copolymer and the diblock copolymer with the longer PLLA block in early fractions when the column was packed with carboxymethyl-modified porous silica. When the porous medium was PLLA-grafted silica, size exclusion dominated, but the low-molecular-mass components were separated according to their chemical composition.     

Characterisation and evaluation of metal-loaded iminodiacetic acid-silica of different porosity for the selective enrichment of phosphopeptides

Silica particles of different porosity were functionalised with iminodiacetic acid (IDA) and loaded with Fe(III) to yield immobilised metal affinity chromatography stationary phases (Fe(III)-IDA-silica) for phosphopeptide enrichment. The elution step of bound phosphopeptides was optimised with a 32P radioactive labelled peptide by a comprehensive study. Several elution systems, including phosphate buffers of different pH and concentration and ethylenediaminetetraacetic acid solutions were employed. Furthermore the effect of support porosity on elution behaviour was investigated. Under best conditions recoveries higher than 90% were achieved. A solid-phase extraction (SPE) protocol was developed for fractionation of phosphorylated and non-phosphorylated peptides and desalting of the fractions which is essential for subsequent mass spectrometric analysis by the combination of Fe(III)-IDA-silica and C18-silica particles. The pH of the loading buffer was found to be a critical parameter for the efficiency of the SPE protocol. As tryptic digests of alpha-lactalbumin, lysozyme and ribonuclease A mixed with three synthetic phosphopeptides were fractionated, pH 2.5 provided minimal proportion of unspecific bound peptides when comparing the fractions after mu-LC-electrospray ionization MS separation. The effect of a sample derivatisation reaction (methylation) on the efficiency of phosphopeptide enrichment was further investigated. Blocking carboxylate groups by methyl ester formation totally prevented unspecific interaction with the immobilised Fe(III) ions, but generated partially methylated phosphopeptides that increased the complexity of the phosphorylated fraction.     

Application of solid‐phase extraction for the concentration of chromophores,fluorophores, and photosensitizers from lens protein digests

Solid‐phase extraction was applied for the separation of protein digests obtained from aged human lenses, cataractous human lenses, calf lens proteins in vitro glycated with dehydroascorbic acid and native calf lens proteins. Four fractions were collected after stepwise elution with different solvents. The first fraction contained about 80% of the digested material possessing free amino groups. At the same time, the third and the fourth fractions were enriched in chromophores, fluorophores, and photosensitizing structures that originate mainly from advanced protein glycation. The comparison between the total digest and the fourth fraction based on their UV absorption at 330 nm, intensity of fluorescence (excitation/emission 350/450 nm), and production of singlet oxygen upon UVA irradiation argues that the solid‐phase extraction was capable of concentrating the advanced glycation end‐products about a hundredfold. Thus, this technique is a useful step for separation and concentration of fluorophores, chromophores, and photosensitizers from aged and glycated lens protein digests.     

Calibration of gel permeation chromatographic columns for measuring the molecular size of poly(vinyl chloride) in tetrahydrofuran

A calibration plot of the intrinsic viscosities of poly(vinyl chloride) fractions against elution volumes gives a good correlation between the first moments, i.e., mean elution volumes, and intrinsic viscosities of poly(vinyl chloride) whole polymers. This is evidence that column permeation of chain macromolecules is governed by some sort of hydrodynamic size in a manner akin to that in which hydrodynamic size affects capillary viscosity measurements.     

Retention mechanism, isocratic and gradient-elution separation and characterization of (co)polymers in normal-phase and reversed-phase high-performance liquid chromatography

Synthetic (co)polymers or (co)oligomers with two (or more) repeating groups show not only molar mass distribution, but also composition and sequence distribution of the individual repeat units. To characterize such two- (or more-) dimensional distribution, liquid chromatography under "critical conditions" has been suggested, where the separation according to one type of repeating units is suppressed by balancing the adsorption and the size-exclusion effects. In present work it is shown that by combination of adequately selected separation conditions in normal-phase and in reversed-phase systems, the two-dimensional distribution mode can be adjusted to result in the separation following the distribution of any of the two repeat units in ethylene oxide-propylene oxide block (co)oligomers. Based on the retention mechanism suggested, prediction and optimization of the conditions for isocratic and gradient-elution separations of (co)oligomers is possible. HPLC-MS with atmospheric-pressure chemical ionization is a valuable tool for unambiguous identification of the individual (co)oligomers and their tracking in course of method development. Gradient elution can be used for the separation and characterization of block (co)oligomers of ethylene oxide (EO) and propylene oxide (PO) according to the number of the units in one block, while the separation according to the distribution of the units in the other block is suppressed. The effects of the arrangement of the individual EO and PO blocks in the block (co)oligomers (the sequence distribution) affects significantly the retention behavior and the selection of the optimum separation conditions.