Anodic alumina supported dual-layer microporous silica membranes

We present a new processing scheme for the deposition of microporous, sol–gel derived silica membranes on inexpensive, commercially available anodic alumina (Anodisk™) supports. In a first step, a surfactant-templated mesoporous silica sublayer (pore size 2–6 nm) is deposited on the Anodisk support by dip-coating, in order to provide a smooth transition from the pore size of the support (20 or 100 nm) to that of the membrane (3–4 Å). Subsequently, the microporous gas separation membrane layer is deposited by spin-coating, resulting in a defect-free dual-layer micro-/mesoporous silica membrane exhibiting high permeance and high selectivity for size selective gas separations. For example, in the case of CO₂:N₂ separation, the CO₂ permeance reached 3.0 MPU (1 MPU = 10⁻⁷ mol m⁻² s⁻¹ Pa⁻¹) coupled with a CO₂:N₂ separation factor in excess of 80 at 25 °C. This processing scheme can be utilized for laboratory-scale development of other types of microporous or dense inorganic membranes, taking advantage of the availability, low cost and low permeation resistance of anodic alumina (or other metal oxide) meso- and macroporous supports.     

Cobalt-doped silica membranes for gas separation

Cobalt-doped silica membranes were synthesized using tetraethyl orthosilicate-derived sol mixed with cobalt nitrate hexahydrate. The cobalt-doped silica structural characterization showed the formation of crystalline Co₃O₄ and silanol groups upon calcination. The metal oxide phase was sequentially reduced at high temperature in rich hydrogen atmosphere resulting in the production of high quality membranes. The cobalt concentration was almost constant throughout the film depth, though the silica to cobalt ratio changed from 33:1 at the surface to 7:1 at the interface with the alumina layer. It is possible that cobalt has more affinity to alumina, thus forming CoOAl₂O₃. The He/N₂ selectivities reached 350 and 570 at 160 °C for dry and 100 °C wet gas testing, respectively. Subsequent exposure to water vapour, the membranes was regenerated under dry gas condition and He/N₂ selectivities significantly improved to 1100. The permeation of gases generally followed a temperature dependency flux or activated transport, with best helium permeation and activation energy results of 9.5 × 10⁻⁸ mol m⁻² s⁻¹ Pa⁻¹ and 15 kJ mol⁻¹. Exposure of the membranes to water vapour led to a reduction in the permeation of nitrogen, attributed to water adsorption and structural changes of the silica matrix. However, the overall integrity of the cobalt-doped silica membrane was retained, given an indication that cobalt was able to counteract to some extent the effect of water on the silica matrix. These results show the potential for metal doping to create membranes suited for industrial gas separation.     

Development of polyoxadiazole nanocomposites for high temperature polymer electrolyte membrane fuel cells

Novel nanocomposite membranes were prepared with sulfonated polyoxadiazole and different amounts of sulfonated dense and mesoporous (MCM-41) silica particles. It has been shown that particle size and functionality of sulfonated silica particles play an important role when they are used as fillers for the development of polymer electrolyte nanocomposite membrane for fuel cells. No significant particle agglomerates were observed in all nanocomposite membranes prepared with sulfonated dense silica particles, as analyzed by SEM, AFM, TGA, DMTA and tensile tests. The T_g values of the composite membranes increased with addition of sulfonated silica, indicating an interaction between the sulfonic acid groups of the silica and the polyoxadiazole. Constrained polymer chains in the vicinity of the inorganic particles were confirmed by the reduction of the relative peak height of tan δ. A proton conductivity of 0.034 S cm⁻¹ at 120 °C and 25% RH, which is around two-fold higher than the value of the pristine polymer membrane was obtained.     

Amperometric sensing of norepinephrine at picomolar concentrations using screen printed,high surface area mesoporous carbon

Norepinephrine (NE) is detected amperometrically using the enzyme Phenylethanolamine N-methyl transferase and cofactor S-(5′-Adenosyl)-l-methionine chloride dihydrochloride with disposable screen printed mesoporous carbon electrodes. The role of internal surface area and pore size of the mesoporous carbon is systematically examined using soft-templated, mesoporous silica–carbon powders with highly microporous walls obtained from etching of the silica to produce powders with surface areas ranging from 671–2339 m² g⁻¹. As the surface area increases, the sensitivity of the biosensor at very low NE concentrations (0–500 pg mL⁻¹) in phosphate buffered saline (PBS) increases just as the current signal increases with respect to the NE concentration of 81–1581 μA mL ng⁻¹ cm⁻² for the mesoporous carbons. The best performing electrode provides similar sensitivity in whole rabbit blood in comparison to PBS despite no membrane layer to filter the non-desired reactants; the small (<5 nm) pore size and large internal surface area acts to minimize non-specific events that decrease sensitivity.     

Preparation of higher flux NaA zeolite membrane on asymmetric porous support and permeation behavior at higher temperatures up to 145 °C in vapor permeation

NaA zeolite membranes were synthesized on an asymmetric porous alumina support with a lower mass-flow resistance for development of more economically feasible membranes with higher permeation performance. The support influence on permeation fluxes through the membrane using asymmetric support was investigated by vapor permeation at 100–145 °C in a mixture of water (10 wt.%)/ethanol (90 wt.%) in which the higher permeation fluxes up to 37 kg m⁻² h⁻¹ or water permeances up to 3.2 × 10⁻⁶ mol m⁻² s⁻¹ Pa⁻¹at 145 °C were observed. The performance was higher than those in the previously reported NaA membrane on a monolayer porous alumina support of 31 kg m⁻² h⁻¹ or water permeances of 2.5 × 10⁻⁶ mol m⁻² s⁻¹ Pa⁻¹at 145 °C. These results are experimental evidence to show the effect of asymmetric support utilization in membrane preparation on the higher membrane performance. The estimate of the pressure drop over the both types of support indicates that the improvement of higher permeation fluxes in the asymmetric type membrane could be attributed to the suppression of pressure drop in the support layer due to lower mass-flow resistance there.     

Highly ordered Zn-doped mesoporous silica: An efficient catalyst for transesterification reaction

Designing highly ordered material with nanoscale periodicity is of great significance in the field of solid state chemistry. Herein, we report the synthesis of highly ordered 2D-hexagonal mesoporous zinc-doped silica using a mixture of anionic and cationic surfactants under hydrothermal conditions. Powder XRD, N₂ sorption, TEM analysis revealed highly ordered 2D-hexagonal arrangements of the pores with very good surface area (762 m² g⁻¹) in this Zn-rich mesoporous material. Chemical analysis shows very high loading of zinc (ca. 12.0 wt%) in the material together with retention of hexagonal pore structure. Interestingly, high temperature calcination resulted into zinc silicate phase, unlike any ZnO phase, which otherwise is expected under heat treatments. High surface area together with Zn loading in this mesoporous material has been found useful for the catalytic activity of the materials in the acid-catalyzed transesterification reactions of various esters under mild liquid phase conditions.     

Thermal stability of high surface area silicon carbide materials

The synthesis of mesoporous silicon carbide by chemical vapor infiltration of dimethyl dichlorosilane into mesoporous silica SBA-15 and subsequent dissolution of the silica matrix with HF was investigated. The influence of the synthesis parameters of the composite material (SiC/SBA-15) on the final product (mesoporous SiC) was determined. Depending on the preparation conditions, materials with specific surface areas from 410 to 830 m² g⁻¹ and pore sizes between 2 and 10 nm with high mesopore volume (0.31-0.96 cm³ g⁻¹) were prepared. Additionally, the thermal stability of mesoporous silicon carbide at 1573 K in an inert atmosphere (argon) was investigated, and compared to that of SBA-15 and ordered mesoporous carbon (CMK-1). Mesoporous SiC has a much higher thermal textural stability as compared to SBA-15, but a lower stability than ordered mesoporous carbon CMK-1.     

Non-chromatographic determination of ultratraces of V(V) and V(IV) based on a double column solid phase extraction flow injection system coupled to electrothermal atomic absorption spectrometry

In this work, a non-chromatographic procedure for the on-line determination of ultratraces of V(V) and V(IV) is presented. The method involves a solid phase extraction-flow injection system coupled to electrothermal atomic absorption spectrometry (SPE-FI-ETAAS). The system holds two microcolumns (MC) set in parallel and filled with lab-made mesoporous silica functionalized with 3-aminopropyltriethoxy silane (APS) and mesoporous silica MCM-41, respectively. The pre-concentration of V(V) is performed by sorption onto the first MC (C1) filled with APS at pH 3, whilst that of V(IV) is performed by sorption onto the second column (C2) filled with mesoporous silica MCM-41 at pH 5. Aqueous samples containing both analytes are loaded and, after pre-concentration (pre-concentration factor PCF = 10, sorption flow rate = 1 mL min⁻¹, sorption time = 10 min), they are eluted in separate vessels with hydroxylammonium chloride (HC) 0.1 mol L⁻¹ in HCl 0.5 mol L⁻¹ (elution volume = 1 mL, elution flow rate = 0.5 mL min⁻¹). Afterwards, both analytes are determined through ETAAS with graphite furnace. Under optimized conditions, the main analytical figures of merit for V(V) and V(IV) are, respectively: detection limits (3 s): 0.5 and 0.6 μg L⁻¹, linear range: 2-100 μg L⁻¹ (both analytes), sensitivity: 0.015 and 0.013 μg⁻¹ L and sample throughput: 6 h⁻¹ (both analytes). Recoveries of both species were assayed in different water samples. Validation was performed through certified reference materials for ultratraces of total vanadium in river water.     

Fluorinated polyoxadiazole for high-temperature polymer electrolyte membrane fuel cells

For the first time a fluorinated polyoxadiazole doped with phosphoric acid as a proton-conducting membrane for operation at temperatures above 100 °C and low humidities for fuel cells has been reported. Fluorinated polyoxadiazole with remarkable chemical stability was synthesized. No changes in the molecular weight (about 200,000 g mol⁻¹) can be observed when the polymer is exposed for 19 days to mixtures of sulfuric acid and oleum. Protonated membranes with low doping level (0.34 mol of phosphoric acid per polyoxadiazole unit, 11.6 wt.% H₃PO₄) had proton conductivity at 120 °C and RH = 100% in the order of magnitude of 10⁻² S cm⁻¹. When experiments are conducted at lower external humidity, proton conductivity values drop an order of magnitude. However still a high value of proton conductivity (6 × 10⁻³ S cm⁻¹) was obtained at 150 °C and with relative humidity of 1%. In an effort to increase polymer doping, nanocomposite with sulfonated silica containing oligomeric fluorinated-based oxadiazole segments has also been prepared. With the addition of functionalized silica not only doping level but also water uptake increased. For the nanocomposite membranes prepared with the functionalized silica higher proton conductivity in all range of temperature up to 120 °C and RH = 100% (in the order of magnitude of 10⁻³ S cm⁻¹) was observed when compared to the plain membrane (in the order of magnitude of 10⁻⁵ S cm⁻¹).     

Mesoporous silica SBA-15, a new adsorbent for bioactive polyphenols from red wine

The aim of this paper is to evaluate the ability of the mesoporous silica SBA-15 to adsorb polyphenols from red wine. The mesoporous molecular sieve silica SBA-15 was hydrothermally synthesized in acidic media and characterized by SAXRD, BET, EDX and SEM. The adsorption behavior of mesoporous silica SBA-15 was investigated at 5 °C for 24 h using an adsorbent dose of 8 g SBA-15 L⁻¹ red wine. The total polyphenols content expressed as mg of gallic acid equivalents (GAE L⁻¹) was estimated from the standard curve of gallic acid (absorbance at 280 nm). HPLC chromatograms of methanolic extract from mesoporous SBA-15 at 256, 280, 324, and 365 nm exhibits the strong retention of quercetin and cis-resveratrol and a reasonable retention of trans-resveratrol, catechin, epicatechin, rutin, and phenolic acids (meta- and para-hydroxybenzoic, vanillic, caffeic, syringic, salicylic and para-coumaric acids).     

Separation of casein micelles from whey proteins by high shear microfiltration of skim milk using rotating ceramic membranes and organic membranes in a rotating disk module

This paper investigates the microfiltration of skim milk in order to separate caseins micelles from two whey proteins, α-lactalbumin (α-La) and β-lactoglobulin (β-Lg), using a modified dynamic filtration pilot (MSD) consisting in 6 ceramic 9-cm diameter membrane disks of 0.2 μm pores, rotating around a shaft inside cylindrical housing. A comparison was made with another dynamic filtration module consisting in a disk rotating near a fixed PVDF 15.5 cm diameter membrane with 0.15 μm pores. Maximum permeate fluxes were 120 L h⁻¹ m⁻² with the MSD module at 1930 rpm and at 40 °C, and 210 L h⁻¹ m⁻² at 2500 rpm and 45 °C, with the rotating disk module. Casein rejection was around 99% at high speed for both membranes. α-La transmission decreased with increasing transmembrane pressure (TMP) from 75% to 60% for ceramic membranes and from 25% to 10% for the PVDF one. β-Lg transmissions were lower, ranging from 23% to 15% for ceramic membranes and from 20% to 5% for the PVDF one. In a concentration test with the PVDF membrane at 2000 rpm, the flux decayed from 200 L h⁻¹ m⁻² at initial concentration to 80 L h⁻¹ m⁻² at VRR = 3.2 and 22.1% of the initial α-La mass was recovered in the permeate, against 8.1% for β-Lg. Permeate fluxes in the mass transfer limited regime (J_lim) of the MSD and rotating disk module operated at various speeds were well correlated by the equation J_lim = 17.13 V_av where V_av denoted the disk azimuthal velocity averaged over the membrane area. Measurements of J_lim, taken from Ref. [G. Samuelsson, P. Dejlmek, G. Tragardh, M. Paulsson, Minimizing whey protein retention in crossflow microfiltration of skim milk. Int. Dairy J. 7 (1997) 237–242] during MF of skim milk using tubular ceramic membranes at velocities from 1.5 to 8 m s⁻¹ with permeate co-current recirculation were found to obey the same correlation.     

Hierarchical dendritic gold microstructure-based aptasensor for ultrasensitive electrochemical detection of thrombin using functionalized mesoporous silica nanospheres as signal tags

A sensitive electrochemical approach for the detection of thrombin was designed by using densely packed hierarchical dendritic gold microstructures (HDGMs) with secondary and tertiary branches as matrices, and thionine-functionalized mesoporous silica nanospheres as signal tags. To prepare the signal tags, the positively charged thionine (as an indicator) was initially adsorbed onto the mesoporous silica nanoparticles (MSNs). Then [AuCl₄]⁻ ions were in situ reduced on the thionine-modified MSNs by ascorbic acid to construct nanogold-decorated MSNs (GMSNs). The formed GMSNs were employed as label of the aminated aptamers. The assay was carried out in PBS, pH 7.4 with a sandwich-type assay mode by using the assembled thionine in the GMSNs as indicators. Compared with the pure silica nanoparticles, mesoporous silica could provide a larger surface for the immobilization of biomolecules and improve the sensitivity of the aptasensor. Under optimal conditions, the electrochemical aptasensors exhibited a wide linear range from 0.001 to 600 ng mL⁻¹ (i.e. 0.03 pM to 0.018 μM thrombin) with a low detection limit (LOD) of 0.5 pg mL⁻¹ (≈15 fM) thrombin at 3σ. No obvious non-specific adsorption was observed during a series of analyses to detect target analyte. The precision, selectivity and stability of the aptasensors were acceptable. Importantly, the methodology was evaluated with thrombin spiked samples in blank fetal calf serum, and the recoveries were 94.2–112%, indicating an exciting potential for thrombin detection.     

Mesoporous silica-based electrochemical sensor for sensitive determination of environmental hormone bisphenol A

Bisphenol A (BPA) is an emerging contaminant with severe toxic effects such as disrupting endocrine system or causing cancer, therefore, developing sensitive and selective sensor for BPA is very important and interesting. Herein, MCM-41, a kind of mesoporous silica, was synthesized and then used to prepare an electrochemical sensor for BPA. For better comparison, carbon nanotubes, activated carbon, silica gel and graphite were also employed to prepare electrochemical sensor for BPA. The electrochemical behaviors of BPA at different electrochemical sensors were investigated. Compared with other sensors, the MCM-41 sensor greatly enhances the response signal of BPA due to the large active surface area and high accumulation efficiency. The effects of pH value, accumulation time and sensor composition were examined. The linear range is from 2.2 × 10⁻⁷ to 8.8 × 10⁻⁶ mol L⁻¹, and the limit of detection is evaluated to be 3.8 × 10⁻⁸ mol L⁻¹. Finally, the MCM-41 sensor was successfully employed to determine BPA in water samples.     

Structural and mechanical characterizations of microporous silica–boron membranes for gas separation

This paper presents structural and mechanical characterizations of microporous silica membranes for gas separation. The membrane separative layer is made of microporous silica–B₂O₃ produced via a sol–gel process. This layer of about 200 nm of thickness is deposited on the internal surface of a tubular asymmetric γ-alumina/α-alumina support. FTIR and Raman analyses indicate the presence of the boron in the silica net and the above methods in conjunction with ¹¹B MAS NMR analyses of the samples indicate that boron is located mainly in the tetrahedral framework position. Such membranes present interesting gas separation properties at temperatures up to 500 °C and transmembrane pressures lower than 8 bar. He permeance values close to 10⁻¹⁰ kmol m⁻² s⁻¹ Pa⁻¹ are obtained, associated with ideal selectivity α(He/CO₂) which can reach 55. Mechanical properties of separative silica-modified layers are measured by nanoindentation and the coefficient of thermal expansion is obtained from pure material.     

Development of a membrane reactor for decomposing hydrogen sulfide into hydrogen using a high-performance amorphous silica membrane

We have successfully developed a membrane reactor for decomposing hydrogen sulfide into hydrogen using an amorphous silica membrane for the first time. The membrane was prepared by the CVD method with tetramethoxysilane and oxygen, and showed excellent hydrogen permeance at 873 K of the order of 10⁻⁷ mol m⁻² s⁻¹ Pa⁻¹ and high hydrogen/nitrogen permselectivity of 10⁴. The membrane reactor constructed with our membrane and a commercially available catalyst decomposed hydrogen sulfide into hydrogen with higher conversion than the equilibrium conversion. This conversion enhancement was because of the selective extraction of hydrogen from the reaction side to the permeate side by the silica membrane.     

Oxidized multiwalled carbon nanotubes for quantitative determination of cationic surfactants in water samples using atmospheric pressure matrix-assisted laser desorption/ionization mass spectrometry

A new biosensor for detection of phenols, based on tyrosinase immobilization with alumina sol-gel on Sonogel-Carbon transducer, has been developed. The electrode was prepared using high energy ultrasounds directly applied to the precursors. The alumina sol-gel provided a microenvironment for retaining the native structure and activity of the entrapped enzyme and a very low mass transport barrier to the enzyme substrates. Phenols are oxidized by tyrosinase biosensor to form a detectable product, which was determined at −300 mV vs. Ag/AgCl reference electrode. For phenol, the sensor exhibited a fast response which resulted from the porous structure and high enzyme loading of the sol-gel matrix. The linear range was from 5 × 10⁻⁷ M to 3 × 10⁻⁵ M, with a detection limit of 3 × 10⁻⁷ M. The stability of the biosensor was also evaluated.     

Cerium oxide-deposited mesoporous silica nanoparticles for the determination of carcinoembryonic antigen in serum using inductively coupled plasma-mass spectrometry

CeO₂-deposited mesoporous silica nanoparticles were synthesized as a probe to determine carcinoembryonic antigen (CEA) in serum by inductively coupled plasma-mass spectrometry (ICP-MS). The prepared mesoporous nanoparticles were modified and tagged to the target for sandwich-type immunoassay. Fe₃O₄ magnetic nanoparticles (MNPs) were also synthesized and immobilized with antibody to extract the target biomarker. The calibration curve of the synthesized CeO₂-deposited silica nanoparticles, which was plotted by the signal ratio of ¹⁴⁰Ce/⁵⁷Fe measured by ICP-MS vs. the concentration of CEA, showed excellent linearity and sensitivity owing to the signal amplification and low spectral interference. Under optimal conditions, the sandwich-type analytical method was applied to determine CEA in serum spiked in the range of 0.001–5 ng mL⁻¹ and showed a limit of detection of 0.36 ng mL⁻¹. Since the deposited CeO₂ in the mesoporous silica layer can be substituted by other metal compounds, various kinds of metal-deposited nanoparticles can be prepared as probe materials for multiplex detection in bioanalysis.     

Novel sponge-like molecularly imprinted mesoporous silica material for selective isolation of bisphenol A and its analogues from sediment extracts

Bisphenol A (BPA) imprinted sponge mesoporous silica was synthesized using a combination of semi-covalent molecular imprinting and simple self-assembly process. The molecularly imprinted sponge mesoporous silica (MISMS) material obtained was characterized by FT-IR, scanning electron microscopy, transmission electron microscopy, and nitrogen adsorption–desorption measurements. The results show that the MISMS possessed a large specific surface area (850.55 m² g⁻¹) and a highly interconnected 3-D porous network. As a result, the MISMS demonstrated a superior specific adsorption capacity of 169.22 μmol g⁻¹ and fast adsorption kinetics (reaching equilibrium within 3 min) for BPA. Good class selectivity for BPA and its analogues (bisphenol F, bisphenol B, bisphenol E and bisphenol AF) was also demonstrated by the sorption experiment. The MISMS as solid-phase extraction (SPE) material was then evaluated for isolation and clean-up of these bisphenols (BPs) from sediment samples. An accurate and sensitive analytical method based on the MISMS–SPE coupled with HPLC–DAD has been successfully established for simultaneous determination of five BPs in river sediments with detection limits of 0.43–0.71 ng g⁻¹ dry weight (dw). The recoveries of BPs for lyophilizated sediment samples at two spiking levels (50 and 500 ng g⁻¹ dw for each BP) were in the range of 75.5–105.5% with RSD values below 7.5%.     

Hydrogen gas mixture separation by CVD silica membrane

In this work we investigate the performance of high flux chemical vapour deposition (CVD) silica membranes for the separation of gas mixtures containing H₂ and CO₂ at various temperatures. The membranes were prepared by a counter diffusion CVD method where tetraethyl orthosilicate (TEOS) and O₂ were used as reactants. Single gas permeation resulted in activated transport for the smaller kinetic diameter gases (H₂ and He) whilst the larger kinetic diameter gases (CO₂ and N₂) showed negative activation energy. The single gas permeation of H₂ increased from 5.1 × 10⁻⁷ to 7.0 × 10⁻⁷ mol m⁻² s⁻¹ Pa⁻¹ in the temperature range 100–400 °C, and H₂/CO₂ and H₂/N₂ selectivities reached 36 and 57 at 400 °C, respectively. The H₂ purity in the permeate stream also increased with temperature for H₂:CO₂ binary gas mixture, thus being beneficial for H₂ diffusion. H₂ competitively permeated through the membrane at a several range of gas mixtures, and a saturation level was achieved at H₂:CO₂ 60:40 feed concentration, where the diffusion of CO₂ molecules became negligible delivering ∼99% H₂ purity in the permeate stream. These results substantiate that the counter diffusion CVD method produced thin silica film membranes with a very precise pore size control, in particular suggesting a narrow pore distribution with average pore radius of about 3.1 Å.     

Study on composite membranes with high selective permeance properties

Flavonoids are natural products having several biological and physiological properties depending upon their molecular configurations. Flavonoids with similar configuration cannot be separated by traditional separation method and membrane separation technology whose selectivity is lower. This work investigates composite membranes with structural and functional molecular recognition properties prepared according to molecular imprinted technology. Functional silica sol was synthesized by taking luteolin as the template (or imprinting) molecule, γ-aminopropyltriethoxysilane (γ-APTS) as the functional monomer, and tetraethoxysilane (TEOS) as the cross-linker. The resultant functional silica sol was coated on Al₂O₃ microporous substrate followed by the removal of the template molecule. Scanning electron microscope micrographs showed a 5 μm thickness composite membrane with uniformly distributed porosity. Steady state flux was reached at ∼70 min at 215 L m⁻² h⁻¹ for the composite membrane, while a lower value of 168 L m⁻² h⁻¹ was measured for the blank membrane (i.e. non-templated). Further, in an aqueous mixture containing similar template molecules, the selectivity factor of luteolin to rutin was 14.1, thus suggesting that the imprinting process allowed for preferential permeance and affinity selectivity to the template molecule (i.e. luteolin). These results strongly suggest the formation of cavities, which are joined by channels to deliver the percolative effect for the permeation of luteolin. In addition to structural formation, further site recognition properties were accomplished by the functional silica sol in the composite matrix by electrovalent bonds. Considering the percolative effect in tandem with electrovalent bonds and under the influence of a concentration gradient (i.e. driving force), a mechanism of molecular recognition was proposed based on the molecular bond, followed by bond cutting and jumping to another site to form another molecular bond. The preparation method of the composite membrane was applied to other template molecules, and the template molecules can selectively permeate the membrane. So the method was universal for other substance. So it made it possible for the separation of the natural products exactly and efficiently. At the same time, it had great potential for the resolution of the chiral drugs and the preparation of the new membrane reactor.