Silver nanoparticles stabilized by crosslinked poly(vinyl pyrrolidone) and its application for facilitated olefin transport

Positively polarized silver nanoparticles by poly(vinyl pyrrolidone) (PVP) have been demonstrated for use as stable olefin carriers for facilitated olefin transport membranes. The formation and size of silver nanoparticles stabilized by PVP were monitored using X-ray diffraction (XRD) and transmission electron microscopy (TEM). Nanocomposite membranes consisting of polymer and silver nanoparticles stabilized by PVP exhibited the high separation performance for olefin/paraffin mixtures. X-ray photoelectron spectroscopy (XPS) showed that silver nanoparticles stabilized by PVP exhibited a high positive polarity, resulting in the reversible interaction between the surface of silver nanoparticles and olefin molecules.     

Structure and separation properties of π‐complex membranes comprising poly(hexamethylenevinylene) and silver tetrafluoroborate

Polymer/silver‐ion π‐complex membranes consisting of poly(hexamethylenevinylene) (PHMV) and silver tetrafluoroborate exhibit unusually high separation performance for olefin/olefin and olefin/paraffin mixtures. The formation of π complexes between silver ions and unsaturated C?C bonds of PHMV has been confirmed with wide‐angle X‐ray scattering, differential scanning calorimetry, and X‐ray photoelectron spectroscopy. Fourier transform infrared and ultraviolet spectroscopy studies have revealed that silver ions make π complexes with olefins such as 1,3‐butadiene, propylene, and ethylene. Of these three olefins, 1,3‐butadiene has the highest binding affinity with silver ions in dissolved in PHMV, and this results in its higher solubility and permeance. Therefore, the π‐complex membranes exhibit unusually high separation performance for olefin/olefin and olefin/paraffin mixtures. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1434–1441, 2006     

Assessment of 4-(dimethylamino)pyridine as a capping agent for gold nanoparticles

Gold nanoparticles stabilized with 4-(dimethylamino)pyridine (DMAP) were prepared by ligand exchange and phase transfer (toluene/water) of functionalized gold nanoparticles. DMAP-protected gold nanoparticles are water-soluble, positively charged, and fairly monodisperse (6.2 +/- 0.9 nm). To understand the scope of this interesting system, the details of the binding of DMAP to gold nanoparticles were investigated. The adsorption of DMAP onto gold surfaces was studied by electrochemistry and surface plasmon resonance. It is concluded that of the three most likely binding modes, the one involving the pyridine nitrogen binding to the gold surface, as suggested previously (Gittins, D. I.; Caruso, F. Angew. Chem., Int. Ed. 2001, 40, 3001), is consistent with experimental data. Other 4-substituted pyridines were also assessed as capping agents. The solubility in toluene and basicity of the incoming ligand, as well as the ability to form charged nanoparticles, determine whether ligand exchange and subsequent phase transfer of the nanoparticles occur. The solubility and stability of the DMAP-protected gold nanoparticles were studied as a function of pH using UV-visible spectroscopy and transmission electron microscopy (TEM). These nanoparticles are soluble and stable over a wide pH range (5.0-12.8). It was found that excess DMAP is necessary for both the preparation and the stability of the DMAP-protected gold nanoparticles.     

Influence of oxygen-containing hydrocarbons on the separation of olefin/paraffin mixtures using facilitated transport

Perfluorosulfonated ionomer (PSI) membranes were used to investigate the separation of olefin/paraffin mixtures by means of silver-based facilitated transport of olefins. Pentene and pentane were used as model compounds and separation factors as high as 33 were obtained. Influence of linear C₃C₆ alcohols and ketones on the separation of the pentene/pentane mixtures was investigated. The presence of oxygenates increases the fluxes of olefins and paraffins, resulting in lower selectivity for hydrocarbon separation.     

Manipulating the solubility of gold nanoparticles reversibly and preparation of water-soluble sphere nanostructure through micellar-like solubilization

On the basis of micellar solubilization, a strategy tuning the solubility of gold nanoparticles reversibly was developed. Hydrophobic gold nanoparticles stabilized by octadecylamine (ODA-gold) solubilized in the micellar-like core of poly(vinylpyrrolidone) (PVP) in water to form gold nanoparticles with protective multilayer induced by reduction of interfacial energy. Interestingly, upon redispersing in chloroform, the PVP micellar-like structure can break down and the ODA-gold can be released again. By changing the ratio of PVP/ODA, size-controllable hydrophilic spherical assembly can be prepared. On the basis of the observation of transmission electron microscopy (TEM) and Fourier transform infrared spectroscopy (FTIR), a reasonable mechanism is interpreted thermodynamically.     

Polymeric complex membranes for olefin/paraffin separation

Semi-crystalline polyethylene (PE), rubbery silicone rubber (SR) and glassy poly[(l-trimethylsilyl)-l-propyne] (PTMSP) were modified for olefin/paraffin separation. The polymers were first grafted with the acrylic acid (AA) and then incorporated with silver ions for forming the complex membranes such as PE-g-AA-Ag⁺, SR-g-AA-Ag⁺ and PTMSP-g-AA-Ag⁺ The complex membranes were activated by glycerol solvation and subsequently showed high selectivity in olefin/paraffin separation. The silver ion distribution, the kinetics of olefin binding to PE-g-AA-Ag⁺, the gas permeation properties and the sorption behaviors were studied. A novel dry complex membrane for olefin/paraffin separation based on AgClO₄ complexing with PTMSP main-chain was also studied.     

PVP 稳定的纳米 Au 溶胶对葡萄糖液相选择氧化的催化性能

 采用化学还原法制备了聚乙烯吡咯烷酮 (PVP) 稳定的纳米 Au 溶胶, 这种 Au 溶胶在葡萄糖空气氧化制葡萄糖酸反应中具有良好的催化性能. 考察了 PVP 加入量和氯金酸前驱液的浓度对反应活性的影响. 紫外-可见吸收光谱和透射电镜分析结果表明, 含有较小 Au 粒子的 Au 溶胶体系具有较高的催化活性. 当 PVP/Au 质量比为 40, 氯金酸浓度为100 μg/ml 时, 得到稳定的 Au 溶胶体系具有金粒子尺寸小、分布均匀的特点, 对葡萄糖氧化反应活性高, 葡萄糖的转化率达到 54.4%.     

Olefin Recovery by *BEA-Type Zeolite Membrane: Affinity-Based Separation with Olefin−Ag+ Interaction

Ag⁺ was introduced into *BEA-type zeolite membrane by an ion-exchange method to enhance olefin selectivity. Ag−*BEA membrane exhibited superior olefin separation performance for both ethylene/ethane and propylene/propane mixtures. Particularly, the separation factor for ethylene at 373 K reached 57 with the ethylene permeance of 1.6×10⁻⁷ mol m⁻² s⁻¹ Pa⁻¹. Adsorption properties of olefin and paraffin were evaluated to discuss contribution of Ag⁺ to separation performance enhancement. A strong interaction between olefin and Ag⁺ in the membrane caused preferential adsorption of olefin against paraffin, leading to selective permeation of olefin. Ag−*BEA membrane also exhibited high olefin selectivities from olefin/N₂ mixtures. The affinity-based separation through Ag−*BEA membrane showed a high potential for olefin recovery and purification from various gas mixtures.     

Complexation mechanism of olefin with silver ions dissolved in a polymer matrix and its effect on facilitated olefin transport

Remarkable separation performance of olefin/paraffin mixtures was previously reported by facilitated olefin transport through silver-based polymer electrolyte membranes. The mechanism of facilitated olefin transport in solid membranes of AgCF3SO3 dissolved in poly(N-vinyl pyrrolidone) (PVP) is investigated. In silver polymer electrolyte membranes, only free anions are present up to the 2:1 mole ratio of [C=O]:[Ag], and ion pairs start to form at a ratio of 1:1, followed by higher-order ionic aggregates above a ratio of 1:2. At silver concentrations above 3:1, the propylene permeance increases almost linearly with the total silver concentration, unexpectedly, regardless of the silver ionic constituents. It was also found that all the silver constituents, including ion pairs and higher order ionic aggregates, were completely redissolved into free anions under the propylene environment; this suggests that propylene can be a good ligand for the silver cation. From these experimental findings, a new mechanism for the complexation reaction between propylenes and silver salts in silver-polymer electrolytes was proposed. The new mechanism is consistent with the linearity between the propylene permeance and the total silver concentration regardless of the kind of the silver constituents. Therefore, the facilitated propylene transport through silver-polymer electrolytes may be associated mainly with the silver cation weakly coordinated with both carbonyl oxygen atoms and propylene.     

Preparation and characterization of 4-dimethylaminopyridine-stabilized palladium nanoparticles

4-Dimethylaminopyridine (DMAP)-stabilized palladium nanoparticles with a mean diameter of 3.4 +/- 0.5 nm are prepared from the aqueous phase reduction of Na2PdCl4 using NaBH4 in the presence of DMAP. TEM and UV-vis spectroscopy characterization of the nanoparticle dispersion shows no obvious change in the nanoparticles several months after preparation. 1H NMR spectroscopy of the nanoparticles shows that the nanoparticle dispersion also contains a boron/DMAP complex and two palladium/DMAP complexes. One of the palladium complexes crystallizes out of the dispersion and is identified as Pd(DMAP)4(OH)2 by X-ray crystallography. Following extensive analysis, it is believed that the palladium/DMAP complexes are formed following the oxidation of the palladium nanoparticles. The prepared nanoparticle dispersion promotes selective hydrogen/deuterium (H/D) exchange on the carbon atoms alpha to the endocyclic nitrogen atom on the DMAP-stabilizing ligands through reaction with D2O. This activity is attributed to the presence of the nanoparticles rather than to the presence of the oxidized palladium/DMAP complexes.     

Encagement of Gold Nanoclusters in Crosslinked Resorcinarene Shells

Monolayers of resorcinarene tetraene 1 on gold nanoclusters could be crosslinked by olefin metathesis into a nondesorptive shell. Crosslinking conditions were optimized by monitoring olefin metathesis of 1 by 1 H NMR spectroscopy and obtaining empirical rate constants. Gel permeation chromatography (GPC) was found to be a useful tool for evaluating the enhanced stability of the encaged nanoparticles; resorcinarene-encapsulated nanoparticles which were not subjected to olefin metathesis did not survive GPC analysis, whereas nanoparticles in crosslinked shells were found to be stable.     

A facile approach to synthesize poly(4-vinylpyridine)/multi-walled carbon nanotubes nanocomposites: highly water-dispersible carbon nanotubes decorated with gold nanoparticles

A facile approach to attach high-density and uniform gold nanoparticles on individual multi-walled carbon nanotubes (MWNTs) is achieved. By simple grinding, water-soluble linear polymers poly(4-vinylpyridine) (PVP)-wrapped around nanotubes and thus rendered them reversibly soluble in water, ethanol, and DMF. Individual tubes are clearly observed after PVP-wrapped nanotubes were spin-coated onto a silicon wafer. Subsequently, Au nanoparticles were densely decorated on the individual MWNTs by in situ reduction of HAuCl₄ in the homogeneous aqueous solution of MWNTs–PVP to form stable water-dispersible Au/PVP/MWNTs hybrid. Morphology of Au nanoparticles was determined by scanning electron microscope and atomic force microscope. The diameter of the Au nanoparticles is controlled in the range of 3.5 to 13.5 nm. The presence of gold nanoparticles with decreased particle size was also detected by UV–Vis spectroscopy.     

Adsorption behavior of 4-methoxypyridine on gold nanoparticles

We demonstrate a phase transfer method to create stable colloidal solutions of Au nanoparticles with 4-methoxypyridine ligands. We then investigate the adsorption behavior of 4-methoxypyridine onto gold surfaces by Raman spectroscopy, DFT calculations, and (1)H NMR. In contrast to unsubstituted pyridine and the frequently used (N,N-dimethylamino)pyridine (DMAP), a flat adsorption of 4-methoxypyridine on gold was found.     

Facilitated transport of olefin through solid PAAm and PAAm-graft composite membranes with silver ions

Solid poly(acrylamide) (PAAm) composite membranes containing silver ions have been investigated for olefin/paraffin separation. The propylene permeance increased significantly for a solid PAAm/AgBF₄ composite membrane with increasing loading amount of silver ions. Silver ions in solid PAAm form reversible complexes with propylene, resulting in the facilitated transport of propylene. The propylene selectivity of 100 over propane was obtained when the mole ratio of silver ions to acrylamide unit was 1. This high separation performance would be obtained predominantly because of the high loading of the propylene carrier, silver ions. PAAm-graft/AgBF₄ composite membranes were prepared in order to improve the gas permeance. Introduction of PAAm grafts on a polysulfone microporous membrane surface was confirmed by FT-IR spectroscopy. The propylene permeance was increased through the PAAm-graft/AgBF₄ membranes compared to that through of the PAAm/AgBF₄ composite membranes, indicating the formation of ultra-thin top layer.     

Colloidal gold nanoparticles as catalyst for carbon-carbon bond formation: application to aerobic homocoupling of phenylboronic acid in water

Gold nanoparticles (<2 nm) stabilized by poly(N-vinyl-2-pyrrolidone) (Au:PVP NPs) were prepared by reduction of AuCl4- with NaBH4 in the presence of PVP and characterized via an array of methods including optical absorption spectroscopy, transmission electron microscopy, X-ray diffraction, X-ray absorption near-edge structure, extended X-ray absorption fine structure, and X-ray photoelectron spectroscopy. We demonstrate for the first time that the Au:PVP NPs act as catalyst toward homocoupling of phenylboronic acid in water under aerobic conditions. Suppression of biphenyl formation under anaerobic conditions indicates that molecular oxygen dissolved in water is intimately involved in the coupling reactions. A mechanism of the aerobic homocoupling catalyzed by the Au:PVP NPs is proposed on the basis of a crucial role of dissolved oxygen, steric effects on the product yields, and the well-established mechanism for the Pd(II)-based catalysts.     

Novel crosslinked chitosan/poly(vinylpyrrolidone) blend membranes for dehydrating tetrahydrofuran by the pervaporation technique

Pervaporation separation has been attempted for dehydrating tetrahydrofuran (THF) from its aqueous mixtures using the novel blend membranes of poly(vinylpyrrolidone) (PVP) and chitosan (CS). Membranes were physically blended and crosslinked with glutaraldehyde as well as with sulfuric acid in methanol/sulfuric acid mixture bath to enhance their selectivity and mechanical strength properties. Membranes were characterized by Fourier transform infrared spectroscopy (FTIR), thermogravimetry (TGA) and X-ray diffractometer (X-RD) to assess their intermolecular interactions, thermal stability and crystallinity. Sorption studies were carried out in pure as well as in different compositions of THF + water mixtures to assess polymer–liquid interactions. The membrane exhibited a high selectivity of 1025 with a reasonably high water flux value of 0.0995 kg/m² h at the azeotropic feed composition (94.31 wt.% of THF). Effect of operating parameters such as feed composition, membrane thickness and permeate pressure were evaluated.     

Preparation, characterization and catalytic behavior of Pt-Cu nanoparticles in methane combustion

Fine and well dispersed Pt-Cu bimetallic nanoparticles stabilized by polyvinyl pyrrolidone (PVP) were synthesized by alkaline polyol method. The molar ratio of Pt to Cu was 1 : 1. Further, the Pt-Cu bimetallic nanoparticles were supported on alumina and their catalytic behavior in methane combustion was investigated. The as-prepared as well as the supported Pt-Cu nanoparticles were characterized by transmission elec-tron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), fractal analysis and X-ray diffraction (XRD). The dependence of methane combustion on the morphology and surface composition of Pt-Cu nanoparticles was analyzed based on the experimental results.     

Use of water in aiding olefin/paraffin (liquid + liquid) extraction via complexation with a silver bis(trifluoromethylsulfonyl)imide salt

This paper describes the extraction of C₅–C₈ linear α-olefins from olefin/paraffin mixtures of the same carbon number via a reversible complexation with a silver salt (silver bis(trifluoromethylsulfonyl)imide, Ag[Tf₂N]) to form room temperature ionic liquids [Ag(olefin)_x][Tf₂N]. From the experimental (liquid + liquid) equilibrium data for the olefin/paraffin mixtures and Ag[Tf₂N], 1-pentene showed the best separation performance while C₇ and C₈ olefins could only be separated from the corresponding mixtures on addition of water which also improves the selectivity at lower carbon numbers like the C₅ and C₆, for example. Using infrared and Raman spectroscopy of the complex and Ag[Tf₂N] saturated by olefin, the mechanism of the extraction was found to be based on both chemical complexation and the physical solubility of the olefin in the ionic liquid ([Ag(olefin)_x][Tf₂N]). These experiments further support the use of such extraction techniques for the separation of olefins from paraffins.     

Preparation and thermally promoted ripening of water-soluble gold nanoparticles stabilized by weakly physisorbed ligands

Here, we report on a facile method for the preparation of an aqueous dispersion of 3.6 nm gold nanoparticles electrostatically stabilized by a weakly physisorbed ligand, namely, 4-(dimethylamino)pyridine (DMAP). The nature and extent of the interaction of this ligand with the surface of a gold nanoparticle has been examined. We also report on the thermally promoted ripening of these nanoparticles under mild conditions to yield a dispersion of 11.3 nm gold nanoparticles. The role of the weakly physisorbed DMAP ligand in facilitating thermally promoted ripening under mild conditions has also been examined.     

Rapid purification and size separation of gold nanoparticles via diafiltration

Purification and size-based separation of nanoparticles remain significant challenges in the preparation of well-defined materials for fundamental studies and applications. Diafiltration shows considerable potential for the efficient and convenient purification and size separation of water-soluble nanoparticles, allowing for the removal of small-molecule impurities and for the isolation of small nanoparticles from larger nanostructures in a single process. Herein, we report studies aimed at assessing the suitability of diafiltration for (i) the purification of water-soluble thiol-stabilized 3-nm gold nanoparticles, (ii) the separation of a bimodal distribution of nanoparticles into the corresponding fractions, and (iii) the separation of a polydisperse sample into fractions of differing mean core diameter. NMR, thermogravimetric analysis (TGA), and X-ray photoelectron spectroscopy (XPS) measurements demonstrate that diafiltration produces nanoparticles with a much higher degree of purity than is possible by dialysis or a combination of solvent washes, chromatography, and ultracentrifugation. UV-visible spectroscopic and transmission electron microscopic (TEM) analyses show that diafiltration offers the ability to separate nanoparticles of disparate core size. These results demonstrate the applicability of diafiltration for the rapid and green preparation of high-purity gold nanoparticle samples and the size separation of heterogeneous nanoparticle samples. They also suggest the development of novel diafiltration membranes specifically suited to high-resolution nanoparticle size separation.