Two-Stage Acidic–Alkaline Hydrothermal Pretreatment of Lignocellulose for the High Recovery of Cellulose and Hemicellulose Sugars

The focus of this work was to develop a combined acid and alkaline hydrothermal pretreatment of lignocellulose that ensures high recovery of both hexose and pentose. Dilute sulfuric acid and lime pretreatments were employed sequentially. Process performance was optimized in terms of catalyst concentration, retention time, and temperature using response surface methodology. Medium operational conditions in the acid stage and harsh conditions in the alkaline stage were desirable with optimal performance at 0.73 wt% H₂SO₄, 150 °C, 6.1 min in the first stage, and 0.024 g lime/g biomass, 202 °C, 30 min in the second stage. In comparison to single-stage pretreatments with high recovery of either glucose or xylose, two-stage process showed great promises with >80 % glucose and >70 % xylose recovery. In addition, the method greatly improved ethanol fermentation with yields up to 0.145 g/g Miscanthus, due to significantly reduced formation of inhibitory by-products such as weak acids, furans, and phenols. Supplementing biomimetic acids would further increase glucose yield by up to 15 % and xylose yield by 25 %.     

Steam pretreatment of acid-sprayed and acid-soaked barley straw for production of ethanol

Barley is an abundant crop in Europe, which makes its straw residues an interesting cellulose source for ethanol production. Steam pretreatment of the straw followed by enzymatic hydrolysis converts the cellulose to fermentable sugars. Prior to pretreatment the material is impregnated with a catalyst, for example, H₂SO₄, to enhance enzymatic digestibility of the pretreated straw. Different impregnation techniques can be applied. In this study, soaking and spraying were investigated and compared at the same pretreatment condition in terms of overall yield of glucose and xylose. The overall yield includes the soluble sugars in the liquid from pretreatment, including soluble oligomers, and monomer sugars obtained in the enzymatic hydrolysis. The yields obtained differed for the impregnation techniques. Acid-soaked barley straw gave the highest overall yield of glucose, regardless of impregnation time (10 or 30 min) or acid concentration (0.2 or 1.0 wt%). For xylose, soaking gave the highest overall yield at 0.2 wt% H₂SO₄. An increase in acid concentration resulted in a decrease in xylose yield for both acid-soaked and acid-sprayed barley straw. Optimization of the pretreatment conditions for acid-sprayed barley straw was performed to obtain yields using spraying that were as high as those with soaking. For acid-sprayed barley straw the optimum pretreatment condition for glucose, 1.0 wt% H₂SO₄ and 220°C for 5 min, gave an overall glucose yield of 92% of theoretical based on the composition of the raw material. Pretreatment with 0.2wt% H₂SO₄ at 190°C for 5 min resulted in the highest overall xylose yield, 67% of theoretical based on the composition of the raw material.     

Comparison of yellow poplar pretreatment between NREL digester and sunds hydrolyzer

Single-stage cocurrent dilute acid pretreatments were carried out on yellow poplar (Liriodendron tulipifera) sawdust using an as-installed and short residence time modified pilot-scale Sunds hydrolyzer and a 4-L bench-scale NREL digester (steam explosion reactor). Pretreatment conditions for the Sunds hydrolyzer, installed in the NREL process development unit (PDU), which operates at 1 t/d (bone-dry t) feed rate, spanned the temperature range of 160 – 210°C, 0.1 – 1.0% (w/w) sulfuric acid, and 4-10-min residence times. The batch pretreatments of yellow poplar sawdust in the bench-scale digester were carried out at 210 and 230°C, 0.26% (w/w) sulfuric acid, and 1-, 3-, and 4-min residence times. The dilute acid prehydrolysis solubilized more than 90% of the hemicellulose, and increased the enzymatic digestibility of the cellulose that remained in the solids. Compositional analysis of the pretreated solids and liquors and mass balance data show that the two pretreatment devices had similar pretreatment performance.     

Optimizing Dilute-Acid Pretreatment of Rapeseed Straw for Extraction of Hemicellulose

Biological conversion of biomass into fuels and chemicals requires hydrolysis of the polysaccharide fraction into monomeric sugars prior to fermentation. Hydrolysis can be performed enzymatically or with mineral acids. In this study, dilute sulfuric acid was used as a catalyst for the pretreatment of rapeseed straw. The purpose of this study is to optimize the pretreatment process in a 15-mL bomb tube reactor and investigate the effects of the acid concentration, temperature, and reaction time. These parameters influence hemicellulose removal and production of sugars (xylose, glucose, and arabinose) in the hydrolyzate as well as the formation of by-products (furfural, 5-hydroxymethylfurfural, and acetic acid). Statistical analysis was based on a model composition corresponding to a 3³ orthogonal factorial design and employed the response surface methodology to optimize the pretreatment conditions, aiming to attain maximum xylan, mannan, and galactan (XMG) extraction from hemicellulose of rapeseed straw. The obtained optimum conditions were: H₂SO₄ concentration of 1.76% and temperature of 152.6 °C with a reaction time of 21 min. Under these optimal conditions, 85.5% of the total sugar was recovered after acid hydrolysis (78.9% XMG and 6.6% glucan). The hydrolyzate contained 1.60 g/L glucose, 0.61 g/L arabinose, 10.49 g/L xylose, mannose, and galactose, 0.39 g/L cellobiose, 0.94 g/L fructose, 0.02 g/L 1,6-anhydro-glucose, 1.17 g/L formic acid, 2.94 g/L acetic acid, 0.04 g/L levulinic acid, 0.04 g/L 5-hydroxymethylfurfural, and 0.98 g/L furfural.     

Steam pretreatment of Salix with and without SO2 impregnation for production of bioethanol

In the wood-to-ethanol process, pretreatment of the material is necessary prior to enzymatic hydrolysis to obtain high overall yields of sugar and ethanol. Steam pretreatment of fast-growing Salix either with or without SO₂ impregnation has been investigated by varying different parameters. Overall glucose yields of above 90% and overall xylose yields higher than 80% were obtained both with and without impregnation. However, the most favorable pretreatment conditions for the separate yields of glucose and xylose differed to a lower degree using SO₂-impregnated wood chips, resulting in higher total sugar yield than that obtained with non-impregnated wood chips.     

Consolidated Conversion of Hulled Barley into Fermentable Sugars Using Chemical,Thermal, and Enzymatic (CTE) Treatment

A novel process using chemical, thermal, and enzymatic treatment for conversion of hulled barley into fermentable sugars was developed. The purpose of this process is to convert both lignocellulosic polysaccharides and starch in hulled barley grains into fermentable sugars simultaneously without a need for grinding and hull separation. In this study, hulled barley grains were treated with 0.1 and 1.0 wt.-% sulfuric acid at various temperatures ranging from 110 to 170 °C in a 63-ml flow-through packed-bed stainless steel reactor. After sulfuric acid pretreatment, simultaneous conversion of lignocellulose and starch in the barley grains into fermentable sugars was performed using an enzyme cocktail, which included α-amylase, glucoamylase, cellulase, and β-glucosidase. Both starch and non-starch polysaccharides in the pre-treated barley grains were readily converted to fermentable sugars. The treated hulled barley grains, including their hull, were completely hydrolyzed to fermentable sugars with recovery of almost 100% of the available glucose and xylose. The pretreatment conditions of this chemical, thermal, and enzymatic (CTE) process for achieving maximum yield of fermentable sugars were 1.0 wt.% sulfuric acid and 110 °C. In addition to starch, the acid pretreatment also retained most of the available proteins in solid form, which is essential for subsequent production of fuel ethanol and high protein distiller’s dried grains with solubles co-product.     

Impact of Pretreatment with Dilute Sulfuric Acid Under Moderate Temperature on Hydrolysis of Corn Stover with Two Enzyme Systems

Pretreatment of corn stover with dilute sulfuric acid at moderate temperature was investigated, and glucan digestibility by Cellic CTec2 and Celluclast on the pretreated biomass was compared. Pretreatments were carried out from 60 to 180 min at the temperature from 105 to 135 °C, with acid concentrations ranging from 0.5 to 2 % (w/v). Significant portion of xylan was removed during pretreatment, and the glucan digestibility by CTec2 was significantly better than that by Celluclast in all cases. Analysis showed that glucan digestibility by both two enzymes correlated directly with the extent of xylan removal in pretreatment. Confidence interval was built to give a more precise range of glucan conversion and to test the significant difference among pretreatment conditions. Response surface model was built to obtain the optimal pretreatment condition to achieve high glucan conversion after enzymatic hydrolysis. Considering the cost and energy savings, the optimal pretreatment condition of 1.75 % acid for 160 min at 135 °C was determined, and glucan conversion can achieve the range from 72.86 to 76.69 % at 95 % confidence level after enzymatic hydrolysis, making total glucan recovery up to the range from 89.42 to 93.25 %.     

Tailoring Wet Explosion Process Parameters for the Pretreatment of Cocksfoot Grass for High Sugar Yields

The pretreatment of lignocellulosic biomass is crucial for efficient subsequent enzymatic hydrolysis and ethanol fermentation. In this study, wet explosion (WEx) pretreatment was applied to cocksfoot grass and pretreatment conditions were tailored for maximizing the sugar yields using response surface methodology. The WEx process parameters studied were temperature (160–210 °C), retention time (5–20 min), and dilute sulfuric acid concentration (0.2–0.5 %). The pretreatment parameter set E, applying 210 °C for 5 min and 0.5 % dilute sulfuric acid, was found most suitable for achieving a high glucose release with low formation of by-products. Under these conditions, the cellulose and hemicellulose sugar recovery was 94 % and 70 %, respectively. The efficiency of the enzymatic hydrolysis of cellulose under these conditions was 91 %. On the other hand, the release of pentose sugars was higher when applying less severe pretreatment conditions C (160 °C, 5 min, 0.2 % dilute sulfuric acid). Therefore, the choice of the most suitable pretreatment conditions is depending on the main target product, i.e., hexose or pentose sugars.     

Synthesis and characterization of polylactic acid (PLA) using a solid acid catalyst system in the polycondensation method

In this study, synthesis of poly(l(+) lactic acid) was carried out by using an acid catalyst. Neat chlorosulfonic acid reacts with cellulose to give cellulose sulfuric acid in which sulfuric acid is immobilized on the cellulose surface via bond formation. Cellulose sulfuric acid was used as a catalyst in a quantity of 1.0 wt.% calculated on the monomer. Polycondensation was carried out over a period of 24 h. The resulting poly(l(+) lactic acid) was characterized by Fourier-transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC) thermogravimetric analysis (TGA), ¹H and ¹³C nuclear magnetic resonance (NMR), and gel permeation chromatography. The molecular weight of poly(l-lactic acid) reached as high as 14,875.     

Kinetic Study of Empty Fruit Bunch Using Hot Liquid Water and Dilute Acid

Empty fruit bunch (EFB), a residual product of the palm plantation, is an attractive biomass for biorefinery. As xylan is susceptible to high temperature pretreatment, it is important to setup a proper pretreatment condition to maximize the sugar recovery from EFB. Kinetic parameters of mathematical models were obtained in order to predict the concentration of xylose, glucose, furfural, and acetic acid in the hydrolysate and to find production conditions of xylose. We investigated the kinetics of hot liquid water and dilute sulfuric acid hydrolysis over a 40-min period using a self-designed setup by measuring the concentrations of released sugars (xylose, glucose) and degradation products (acetic acid and furfural). The reaction was performed within the range 160～180 °C, under reaction conditions of various concentration of sulfuric acid (0.1～0.2%) and 1:7 solid-liquid ratio in a batch reactor. The kinetic constants can be expressed by the Arrhenius equation with the activation energy for the hydrolysis of sugar and decomposition of sugar. The activation energy of xylose was determined to be 136.2187 kJ mol(-1).     

Two-stage dilute-acid pretreatment of softwoods

Whole treechips obtained from softwood forest thinnings were pretreated via single-and two-stage dilute-sulfuric acid pretreatment. Whole-tree chips were impregnated with dilute sulfuric acid and steam treated in a 4-L steam explosion reactor. In single-stage pretreatment, wood chips were treated using a wide range of severity. In two-stage pretreatment, the first stage was carried out at low severity tomaximize hemicellulose recovery. Solubilized sugars were recovered from the first-stage prehydrolysate by washing with water. In the second stage, water-insoluble solids from first-stage prehydrolysate were impregnated with dilute sulfuric acid, then steam treated at more severe conditions to hydrolyze a portion of the remaining cellulose to glucose and to improve the enzyme digestibility. The total sugar yields obtained after enzymatic hydrolysis of two-stage dilute acid-pretreated samples were compared with sugar yields from single-stage pretreatment. The overall sugar yield from two-stage dilute-acid pretreatment was approx 10% higher, and the net enzyme requirement was reduced by about 50%. Simultaneous saccharification and fermentation using an adapted Saccharomyces cerevisiae yeast strain further improved cellulose conversion yield and lowered the enzyme requirement.     

Ball Milling Pretreatment of Oil Palm Biomass for Enhancing Enzymatic Hydrolysis

Oil palm biomass, namely empty fruit bunch and frond fiber, were pretreated using a planetary ball mill. Particle sizes and crystallinity index values of the oil palm biomass were significantly reduced with extended ball mill processing time. The treatment efficiency was evaluated by the generation of glucose, xylose, and total sugar conversion yields from the pretreatment process compared to the amount of sugars from raw materials. Glucose and xylose contents were determined using high-performance liquid chromatography. An increasing trend in glucose and xylose yield as well as total sugar conversion yield was observed with decreasing particle size and crystallinity index. Oil palm frond fiber exhibited the best material yields using ball milling pretreatment with generated glucose, xylose, and total sugar conversion yields of 87.0, 81.6, and 85.4 %, respectively. In contrast, oil palm empty fruit bunch afforded glucose and xylose of 70.0 and 82.3 %, respectively. The results obtained in this study showed that ball mill-treated oil palm biomass is a suitable pretreatment method for high conversion of glucose and xylose.     

Fast preparation of nanocrystalline cellulose by microwave-assisted hydrolysis

In this work we report on the procedure for fast and controlled preparation of nanocrystalline cellulose (NCC) from commercially available microcrystalline cellulose using microwave-assisted hydrolysis. By varying the sulfuric acid concentration and hydrolysis temperature, an average hydrodynamic diameter of NCC between 126 and 1,310 nm with corresponding yields between 16 and 82 %, respectively, was obtained in a very short reaction time of 10 min. An additional advantage of the described procedure is its high reproducibility and ability to fine-tune the average NCC particle size by adjusting the reaction conditions, i.e., the sulfuric acid concentration and/or reaction temperature.     

Furfural and 5-Hydroxymethylfurfural Production from Sugar Mixture Using Deep Eutectic Solvent/MIBK System

Choline chloride (ChCl) / glycolic acid (GA) deep eutectic solvent (DES) media with high water content but without any additional catalyst are introduced in furfural and 5-hydroxymethylfurfural (HMF) production. The effects of water content, reaction time, and reaction temperature are investigated with two feedstocks: a glucose/xylose mixture and birch sawdust. Based on the results, 10 equivalent quantities of water (32.9 wt.%) were revealed to be beneficial for conversions without rupturing the DES structure. The optimal reaction conditions were 160 °C and 10 minutes for the sugar mixture and 170 °C and 10 minutes for birch sawdust in a microwave reactor. High furfural yields were achieved, namely 62 % from the sugar mixture and 37.5 % from birch sawdust. HMF yields were low, but since the characterization of the solid residue of sawdust, after DES treatment, was revealed to contain only cellulose (49 %) and lignin (52 %), the treatment could be potentially utilized in a biorefinery concept where the main products are obtained from the cellulose fraction. Extraction of products into the organic phase (methyl isobutyl ketone, MIBK) during the reaction enabled the recycling of the DES phase, and yields remained high for three runs of recycling.     

Hybrid process for the conversion of lignocellulosic materials

Because of the recalcitrant nature of lignocellulosic materials, it is important to pretreat the biomass in order to obtain a suitable material for the bioconversion. In this study, two different types of pretreatments were performed. The first experiment used a 2-gal Parr reactor operated at 140, 150,160, and 170‡C with sulfuric acid concentrations varying from 0.5 to 2%. A second pretreatment was performed with a two-stage low-temperature process. The first-stage pretreatment was performed at 100 or 120‡C with sulfuric acid concentrations of 0.5, 2, and 5% followed by a secondstage pretreatment at 120‡C with 2% acid concentration. The best residues for enzymatic hydrolysis and simultaneous saccharification and fermentations (SSF) came from the higher temperature pretreatment with the Parr reactor. However, a large portion of the xylose fraction was degraded to furfural and glucose was degraded to HMF. On the contrary, the two-stage low temperature pretreatment resulted in a very low percentage of xylose degradation, and no glucose degradation. The residues from this two-stage pretreatment performed satisfactorily toward the production of ethanol by SSFs. This study discusses the results obtained from these experiments.     

Effect of pretreatment reagent and hydrogen peroxide on enzymatic hydrolysis of oak in percolation process

The effect of pretreatment reagent and hydrogen peroxide on enzymatic digestibility of oak was investigated to compare pretreatment performance. Pretreatment reagents used were ammonia, sulfuric acid, and water. These solutions were used without or in combination with hydrogen peroxide in the percolation reactor. The reaction was carried out at 170°C for the predetermined reaction time. Ammonia treatment showed the highest delignification but the lowest digestibility and hemicellulose removal among the three treatments. Acid treatment proved to be a very effective method in terms of hemicellulose recovery and cellulose digestibility. Hemicellulose recovery was 65–90% and digestibilities were >90% in the range of 0.01–0.2% acid concentration. In both treatments, hydrogen peroxide had some effect on digestibility but decomposed soluble sugars produced during pretreatment. Unlike ammonia and acid treatments, hydrogen peroxide in water treatment has a certain effect on hemicellulose recovery as well as delignification. At 1.6% hydrogen peroxide concentration, both hemicellulose recovery and digestibility were about 90%, which were almost the same as those of 0.2% sulfuric acid treatment. Also, digestibility was investigated as a function of hemicellulose removal or delignification. It was found that digestibility was more directly related to hemicellulose removal rather than delignification.     

Comparison of the fermentability of enzymatic hydrolyzates of sugarcane bagasse pretreated by steam explosion using different impregnating agents

Sugarcane bagasse is a potential lignocellulosic feedstock for ethanol production, since it is cheap, readily available, and has a high carbohydrate content. In this work, bagasse was subjected to steam explosion pretreatment with different impregnation conditions. Three parallel pretreatments were carried out, one without any impregnation, a second with sulfur dioxide, and a third with sulfuric acid as the impregnating agent. The pretreatments were performed at 205°C for 10 min. The pretreated material was then hydrolyzed using celluloytic enzymes. The chemical composition of the hydrolyzates was analyzed. The highest yields of xylose (16.2 g/100 g dry bagasse), arabinose (1.5 g/100 g), and total sugar (52.9 g/100 g) were obtained in the hydrolysis of the SO₂-impregnated bagasse. The H₂SO₄-impregnated bagasse gave the highest glucose yield (35.9 g/100 g) but the lowest total sugar yield (42.3 g/100 g) among the three methods. The low total sugar yield from the H₂SO₄-impregnated bagasse was largely due to by-product formation, as the dehydration of xylose to furfural. Sulfuric acid impregnation led to a three-fold increase in the concentration of the fermentation inhibitors furfural and 5-hydroxymethylfurfural (HMF) and a two-fold increase in the concentration of inhibitory aliphatic acids (formic, acetic, and levulinic acids) compared to the other two pretreatment methods. The total content of phenolic compounds was not strongly affected by the different pretreatment methods, but the quantities of separate phenolic compounds were widely different in the hydrolyzate from the H₂SO₄-impregnated bagasse compared with the other two hydrolyzates. No major differences in the content of inhibitors were observed in the hydrolyzates obtained from SO₂-impregnated and non-impregnated bagasse. The fermentability of all three hydrolyzates was tested with a xylose-utilizing Saccharomyces cerevisiae strain with and without nutrient supplementation. The hydrolyzates of SO₂-impregnated and nonimpregnated bagasse showed similar fermentability, whereas the hydrolyzate of H₂SO₄-impregnated bagasse fermented considerably poorer.     

Chestnut Shell as Unexploited Source of Fermentable Sugars: Effect of Different Pretreatment Methods on Enzymatic Saccharification

Chestnut shell (CS) is an agronomic residue mainly used for extraction of antioxidants or as adsorbent of metal ions. It also contains some polysaccharide that has not been considered as potential source of fermentable sugars for biofuel production until now. In this study, the effect of different pretreatment methods on CS was evaluated in order to obtain the greatest conversion of cellulose and xylan into fermentable sugars. Hot acid impregnation, steam explosion (acid-catalysed or not), and aqueous ammonia soaking (AAS) were selected as pretreatments. The pretreated biomass was subjected to saccharification with two enzyme cocktails prepared from commercial preparations, and evaluation of the best pretreatment and enzyme cocktail was based on the yield of fermentable sugars produced. As AAS provided the best result after preliminary experiments, enhancement of sugar production was attempted by changing the concentrations of ammonium hydroxide, enzymes, and CS. The optimal pretreatment condition was 10 % ammonium hydroxide, 70 °C, 22 h with CS at 5 % solid loading. After saccharification of the pretreated CS for 72 h at 50 °C and pH 5.0 with a cocktail containing cellulase (Accellerase 1500), beta-glucosidase (Accellerase BG), and xylanase (Accellerase XY), glucose and xylose yields were 67.8 and 92.7 %, respectively.     

Enzymatic saccharification and fermentation of xylose-optimized dilute acid-treated lignocellulosics

The cellulose reactivity of two lignocellulosic feedstocks, switchgrass and poplar, was evaluated under straight saccharification (SS) and simultaneous saccharification and fermentation (SSF) conditions following dilute sulfuric acid pretreatments designed for optimum xylose yields. The optimum pretreatment conditions, within the constraints of the experimental system (Parr batch reactor), were 1.2% acid, 180°C, and 0.5 min for switchgrass and 1% acid, 180°C, and 0.56 min for poplar. The cellulase enzyme preparation was from Trichoderma reesei and fermentations were done with Saccharomyces cerevisiae. Time courses for SS were monitored as the sum of glucose and cellobiose; those for SSF as the sum of glucose, cellobiose, and ethanol. Percentage conversions under SS conditions were 79.1% and 91.4% for the pretreated poplar and switchgrass feedstocks, respectively. Analogous values under SSF conditions were 73.0% and 90.3% for pretreated poplar and switchgrass, respectively.     

Lipid Production by Cryptococcus curvatus on Hydrolysates Derived from Corn Fiber and Sweet Sorghum Bagasse Following Dilute Acid Pretreatment

Corn fiber and sweet sorghum bagasse (SSB) are both pre-processed lignocellulosic materials that can be used to produce liquid biofuels. Pretreatment using dilute sulfuric acid at a severity factor of 1.06 and 1.02 released 83.2 and 86.5 % of theoretically available sugars out of corn fiber and SSB, respectively. The resulting hydrolysates derived from pretreatment of SSB at SF of 1.02 supported growth of Cryptococcus curvatus well. In 6 days, the dry cell density reached 10.8 g/l with a lipid content of 40 % (w/w). Hydrolysates from corn fiber, however, did not lead to any significant cell growth even with addition of nutrients. In addition to consuming glucose, xylose, and arabinose, C. curvatus also utilized formic acid, acetic acid, 4-hydroxymethylfurfural, and levulinic acid for growth. Thus, C. curvatus appeared to be an excellent yeast strain for producing lipids from hydrolysates developed from lignocellulosic feedstocks.