Study of Acidic (Tetracaprolactam) Dodecamolybdosilicate of the Composition (C<Subscript>6</Subscript>H<Subscript>11</Subscript>NO)<Subscript>4.5</Subscript>Н<Subscript>4</Subscript>[SiМо<Subscript>12</Subscript>O<Subscript>40</Subscript>]

New caprolactam dodecamolybdosilicate of the composition (C₆H₁₁NO)_4.5Н₄[SiМо₁₂O₄₀] (I) is synthesized. Chemical and crystallographic analyses, NMR and IR spectroscopic studies are performed. Compound I is found to crystallize in the monoclinic system with the space group P2₁/n. Unit cell parameters are: a = 19.945(4) Å, b = 13.340(3) Å, c = 28.110(6) Å, β = 110.75(3)°, ρ_calc = 2.232 g/cm³, М = 2350.63, Z = 4, V = 6994(3) ų.     

State of active components on the surface of the PdCl<Subscript>2</Subscript>-CuCl<Subscript>2</Subscript>/γ-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalyst for the low-temperature oxidation of carbon monoxide

The state of the active constituents of the freshly prepared PdCl₂-CuCl₂/γ-Al₂O₃ catalyst for the low-temperature oxidation of the carbon monoxide by molecular oxygen was studied by X-ray absorption spectroscopy (XAS), powder X-ray diffraction (XRD), scanning electron microscopy (SEM), and diffuse reflectance IR Fourier transform spectroscopy (DRIFTS). It was shown that copper in the form of a crystalline phase of Cu₂Cl(OH)₃ with the structure of the mineral paratacamite and palladium chloride in an amorphous state occurred on the surface of γ-Al₂O₃. According to XAS data, the local environment of palladium consisted of four chlorine atoms, which formed a flat square with an increased distance between palladium and one of the chlorine atoms. The evolution of the local environments of copper and palladium upon a transition from the initial salts to the impregnating solutions and chlorides on the surface of γ-Al₂O₃ was considered. The role of γ-Al₂O₃ in the formation of the Cu₂Cl(OH)₃ phase was discussed. It was found by the DRIFTS method that linear (2114 cm⁻¹) and bridging (1990 and 1928 cm⁻¹) forms of coordinated carbon monoxide were formed upon the adsorption of CO on the catalyst surface. The formation of CO₂ upon the interaction of coordinated CO with atmospheric oxygen was detected. Active sites including copper and palladium were absent from the surface of the freshly prepared catalyst.     

Synthesis and structure of the complex [Mo<Subscript>3</Subscript>(μ<Subscript>3</Subscript>-S)(μ<Subscript>2</Subscript>-S<Subscript>2</Subscript>)<Subscript>3</Subscript>(Et<Subscript>2</Subscript>NCS<Subscript>2</Subscript>)<Subscript>3</Subscript>]I

The structure of tri-μ₂-disulfido-μ₃-thiotris(diethyldithiocarbamato)-S,S′-triangle-trimolybdenum iodide [Mo₃(μ₃-S)(μ₂-S₂)₃(Et₂NCS₂)₃]I was determined. The compound was characterized by differential thermal analysis and IR, Raman, and X-ray electronic spectroscopy.     

Reaction of the [B<Subscript>10</Subscript>H<Subscript>9</Subscript>O<Subscript>2</Subscript>C<Subscript>4</Subscript>H<Subscript>8</Subscript>]<Superscript>–</Superscript> anion with C-nucleophiles

The reactions of 1,4-dioxane-substituted closo-decaborate anion ([B₁₀H₉O₂C₄H₈]^–) with metal acetylenides, diethyl malonate, ethyl acetoacetate, triethyl orthoformate, acetylacetone, and malonodinitrile were studied. The reactions were shown to be accompanied with substituent ring opening and attachment of the corresponding pendant functional group. The obtained compounds were characterized by various physicochemical methods (IR and polynuclear NMR spectroscopy, ESI mass spectrometry).     

Diagram of the PbF<Subscript>2</Subscript>–SnF<Subscript>2</Subscript> system

A phase diagram of the PbF₂–SnF₂ system has been studied by differential thermal analysis and X-ray powder diffraction. The system forms Pb_1–хSn_хF₂ (х ≤ 0.33) solid solution and three compounds. Pb₂SnF₆ decomposes in solid state by a peritectoid reaction at 350°С; Pb₃Sn₂F₁₀ and PbSnF₄ melt by peritectic reactions at 565 and 380°С, respectively. The eutectic coordinates are 180°С, 90 mol % SnF₂.     

Catalytic properties of the VO<Subscript><Emphasis Type="Italic">х</Emphasis></Subscript>/Ce<Subscript>0.46</Subscript>Zr<Subscript>0.54</Subscript>O<Subscript>2</Subscript> oxide system in the oxidative dehydrogenation of propane

Ce_0.46Zr_0.54O₂ solid solution prepared using a cellulose template was employed as a carrier for vanadium catalysts of the oxidative dehydrogenation of propane. The properties of VO _х /Ce_0.46Zr_0.54O₂ catalyst (5 wt % vanadium) are compared with the properties of the neat support. The carrier and catalyst are studied by means of BET, SEM, DTA, XRD, and Raman spectroscopy. It is shown that the CeVO₄ phase responsible for the ODH process is formed upon interaction between vanadate ions and cerium ions on the surface of the solid solution. The catalytic properties of the catalyst and the support are studied in the propane oxidation reaction at temperatures of 450 and 500°C with pulse feeding of the reagent. It is found that the complete oxidation of propane occurs on the support with formation of CO₂ and H₂O. Three products (propene, CO₂, and H₂O) form in the presence of the vanadium catalyst. It is suggested that there are two types of catalytic centers on the catalyst’s surface. It is concluded that the centers responsible for the complete oxidation of propane are concentrated mainly on the carrier, while the centers responsible for propane ODH are on the CeVO₄.     

Zr<Subscript>5</Subscript>Ir<Subscript>2</Subscript>In<Subscript>4</Subscript> – A Superstructure of the Lu<Subscript>5</Subscript>Ni<Subscript>2</Subscript>In<Subscript>4</Subscript> Type

Summary. Zr₅Ir₂In₄ was synthesized by reaction of the elements in a glassy carbon crucible in a water-cooled sample chamber of an induction furnace. The sample was characterized by X-ray diffraction on both powder and single crystals. Zr₅Ir₂In₄ crystallizes with a pronounced Lu₅Ni₂In₄ type subcell, space group Pbam, a=1739.5(6), b=766.3(2), c=338.9(2) pm. Weak additional reflections force a doubling of the subcell c axis. The superstructure of Zr₅Ir₂In₄ is of a new type: Pnma, a=1739.5(6), b=677.8(2), c=766.3(2) pm, wR2=0.0529, 1592 F² values, and 60 variable parameters. The group-subgroup scheme for the klassengleiche symmetry reduction is presented. The formation of the superstructure is most likely due to a puckering effect (size of the iridium atoms). The crystal chemistry of Zr₅Ir₂In₄ is briefly discussed.     

Oxidation of Adamantane with H<Subscript>2</Subscript>O<Subscript>2</Subscript>–CF<Subscript>3</Subscript>COCF<Subscript>3</Subscript> · 1.5 H<Subscript>2</Subscript>O in the Presence of VO(acac)<Subscript>2</Subscript>

The system hydrogen peroxide–hexafluoroacetone sesquihydrate effectively oxidizes adamantane in the presence of VO(acac)₂ to afford 64% of adamantan-1-ol in tert-butyl alcohol or 76% of adamantan-2-one in a mixture of acetic acid with pyridine.     

Thermal analysis of the (Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>)<Subscript>1−x</Subscript>(Y<Subscript>2</Subscript>O<Subscript>3</Subscript>)<Subscript>x</Subscript> pigments

The synthesis of new compounds based on Bi₂O₃ is investigated because they can be used as new ecological inorganic pigments. Chemical compounds of the (Bi₂O₃)_1−x(Y₂O₃)_x type were synthesized. The host lattice of these pigments is Bi₂O₃ that is doped by Y³⁺ ions. The incorporation of doped ions provides the interesting colours and contributes to a growth of the thermal stability of these compounds. The simultaneous TG-DTA measurements were used for determination of the temperature region of the pigment formation and thermal stability of pigments. This paper also contains the results of the pigment characterization by X-ray powder diffraction and their colour properties.     

Impedance Study of the Conductivity of Solid Oxide Electrolyte Films SrZr<Subscript>0.95</Subscript>Y<Subscript>0.05</Subscript>O<Subscript>3–δ</Subscript> and CaZr<Subscript>0.9</Subscript>Y<Subscript>0.1</Subscript>O<Subscript>3–δ</Subscript>

Information on the across-plane conductivity of films of solid-oxide electrolytes SrZr_0.95Y_0.05O_3–δ and CaZr_0.9Y_0.1O_3–δ deposited on ion-conducting supports is acquired by the impedance method. It is shown that the support/film interface and the intergrain boundaries considerably affect the across-plane charge transfer in the film. The effect of the crystallographic orientation of the YSZ support on the microstructure and conductivity of the CaZr_0.9Y_0.1O_3–δ electrolyte film is demonstrated.     

Formation of solid solutions of multiferroics in the Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>–Nd<Subscript>2</Subscript>O<Subscript>3</Subscript>–Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> system

The sequence of phases appearance during the formation of Bi_1–xNd_xFeO₃ solid solutions in powder oxides mixtures of bismuth, neodymium, and iron has been determined. It has been shown that the closeness of the reaction mixture composition to that of the individual compound (BiFeO₃ or NdFeO₃) is essential for the realization of the series of phase transformations yielding solid solutions of multiferroics Bi_1–xNd_xFeO₃ as the final product, due to the prevalence of various interphase contacts in the starting reaction zone.     

Hydroethoxycarbonylation of α-olefins at low pressure of carbon(II) oxide in the presence of the PdCl<Subscript>2</Subscript>(PPh<Subscript>3</Subscript>)<Subscript>2</Subscript>–PPh<Subscript>3</Subscript>–AlCl<Subscript>3</Subscript> system

High catalytic activity of the PdCl₂(PPh₃)₂–PPh₃–AlCl₃ system containing AlCl3 as promotor has been demonstrated in the reaction of hydroethoxycarbonylation of hexene-1 and octene-1 at low pressure of carbon(II) oxide (≤25 atm). The reaction yields linear and branched products. The optimal conditions of the process have been elaborated. The target products yield is 84.6–93.8%.     

A new method of synthesis of the B<Subscript>3</Subscript>H<Stack><Subscript>8</Subscript><Superscript>−</Superscript></Stack> anion

A new method of synthesis of the B₃H₈⁻ anion has been suggested. The method uses the reaction of some metal halides (CuCl, SnCl₂, CrCl₃, PbF₂, PbCl₂, PbBr₂, and BiCl₃) with sodium tetrahydroborate. It is characterized by high (up to quantitative) yields and simplicity of isolation of the target products ((n-C₄H₉)₄N)[B₃H₈] and Cs[B₃H₈].     

Crystal structure of Ba<Subscript>3</Subscript>[UO<Subscript>2</Subscript>(C<Subscript>2</Subscript>O<Subscript>4</Subscript>)<Subscript>2</Subscript>(NCS)]<Subscript>2</Subscript> · 9H<Subscript>2</Subscript>O

Single crystals of Ba₃[UO₂(C₂O₄)₂(NCS)]₂ · 9H₂O are synthesized and studied by X-ray diffraction. The crystals are orthorhombic, space group Fddd, Z = 16, and the unit cell parameters are a = 16.253(3) Å, b = 22.245(3) Å, c = 39.031(6) Å. The main crystal structural units are mononuclear complex groups [UO₂(C₂O₄)₂NCS]^3? of the crystal-chemical family (AB ₂ ⁰¹ M¹ (A = UO ₂ ²⁺ , B⁰¹ = C₂O ₄ ^2? , M¹ = NCS^?) of the uranyl complexes linked into a three-dimensional framework by electrostatic interactions and hydrogen bonds involving oxalate ions and water molecules.     

High-temperature reactions in the Co<Subscript>3</Subscript>Cr<Subscript>4</Subscript>(PO<Subscript>4</Subscript>)<Subscript>6</Subscript>–Cr(PO<Subscript>3</Subscript>)<Subscript>3</Subscript> system

A new dichromium(III) cobalt(II) diphosphate(V) of the formula CoCr₂(P₂O₇)₂ was detected in the Co₃Cr₄(PO₄)₆–Cr(PO₃)₃ system. The new compound was obtained as a result of high-temperature solid-state reactions between CoCO₃, Cr₂O₃ and (NH₄)₂HPO₄ as well as between Cr(PO₃)₃ and Co₃Cr₄(PO₄)₆. CoCr₂(P₂O₇)₂ was characterized using XRD, DTA and IR methods. Results demonstrated that CoCr₂(P₂O₇)₂ crystallizes in the triclinic system and its unit cell parameters were calculated. Its infrared spectrum was presented. CoCr₂(P₂O₇)₂ melts incongruently at 1270±10 °C with a formation of solid α-CrPO₄. The compound Co₃Cr₄(PO₄)₆, component of the system under study, was obtained for the first time as a pure phase. Its thermal stability was also investigated. Co₃Cr₄(PO₄)₆ is stable in air up to 1410 ± 20 °C.     

Motif of the three-layered close packing of cluster anions in [RhPy<Subscript>4</Subscript>Cl<Subscript>2</Subscript>]<Subscript>4</Subscript>[Re<Subscript>6</Subscript>S<Subscript>8</Subscript>(CN)<Subscript>6</Subscript>]·1.5H<Subscript>2</Subscript>O

[RhPy₄Cl₂]₄[Re₆S₈(CN)₆]·1.5H₂O (Py is pyridine) was investigated by X-ray analysis. In the cluster anion, the Re-Re distances vary from 2.6063(2) Å to 2.6125(2) Å. For two crystallographically independent complex cations, the distances are 〈Rh-N〉 2.060 Å and 〈Rh-Cl〉 2.336 Å. The motif of the three-layered close packing was found; the [Re₆S₈(CN)₆]^4? anions follow the vertices of a rhombohedron with the parameters a _c ≈ 15.5 Å and α_c ≈ 61°.     

Phase equilibria in the Nb<Subscript>2</Subscript>O<Subscript>5</Subscript>–CdO system and the thermal stability of Cd<Subscript>2</Subscript>Nb<Subscript>2</Subscript>O<Subscript>7</Subscript> and CdNb<Subscript>2</Subscript>O<Subscript>6</Subscript>

Phase equilibria were studied in the Nb₂O₅–CdO system in the Nb₂O₅-rich region including CdNb₂O₆ and Cd₂Nb₂O₇. It was determined that CdNb₂O₆ and Cd₂Nb₂O₇ in air are stable to 1150 and 1120°C, respectively, and that, above these temperatures, there is solid-phase decomposition of niobates with CdO release in the gas phase. Along with the cadmium oxide evaporation, the Cd₂Nb₂O₇ decomposition is accompanied by the formation of cadmium metaniobate CdNb₂O₆ and the CdNb₂O₆ decomposition results in the formation of niobium oxide Nb₂O₅. No thermal events were observed in the differential thermal analysis curve for a 1: 1 CdNb₂O₆–Cd₂Nb₂O₇ mixture heated to 1100°C in air, which suggests that there are neither phase transformations in cadmium niobates, nor a eutectic within this temperature and concentration ranges. A study of the morphology of compacted samples of niobates determined specific conditions for producing dense composite ceramics, a mixture of niobates, that is suitable for using as a dielectric material.     

Phase Diagram of the System Tl<Subscript>2</Subscript>Te–Tl<Subscript>5</Subscript>Te<Subscript>3</Subscript>–Tl<Subscript>9</Subscript>GdTe<Subscript>6</Subscript>

The ternary system Tl–Gd–Te within the composition range Tl₂Te–T_l5Te₃–T_l9GdTe₆ was studied by a set of physicochemical analysis methods. Some internal polythermal sections and the isothermal section at 300 K of the phase diagram were built, projections of the liquidus and solidus surfaces were constructed, and the graphs of the concentration dependences of the parameters and microhardness were plotted. It was shown that much (more than 90%) of the area of the concentration triangle is occupied by the homogeneity region of solid solutions with the Tl₅Te₃ structure (δ-phase). Solid solutions based on Tl₂Te (α-phase) form within a narrow region. The regions of the α- and δ-phases are separated by two-phase region α + δ.     

Crystal structure of Na<Subscript>3</Subscript>(NH<Subscript>4</Subscript>)<Subscript>2</Subscript>[Ir(SO<Subscript>3</Subscript>)<Subscript>2</Subscript>Cl<Subscript>4</Subscript>]·4H<Subscript>2</Subscript>O

The complex Na₃(NH₄)₂[Ir(SO₃)₂Cl₄]·4H₂O was examined with single crystal X-ray diffraction and IR spectroscopy. Crystal data: a = 7.3144(4) Å, b = 10.0698(5) Å, c = 12.3748(6) Å, β = 106.203(1)°, V = 875.26(8) ų, space group P2₁/c, Z = 2, d _calc = 2.547 g/cm³. In the complex anion two trans SO ₃ ^2? groups are coordinated to iridium through the S atom. The splitting of O-H bending vibrations of crystallization water molecules and N-H ones of the ammonium cation is considered in the context of different types of interactions with the closest neighbors in the structure.