Kinetics study of the gas-phase reactions of C2F5OC(O)H and n-C3F7OC(O)H with OH radicals at 253–328 K

The rate constants, k₁ and k₂ for the reactions of C₂F₅OC(O)H and n-C₃F₇OC(O)H with OH radicals were measured using an FT-IR technique at 253–328 K. k₁ and k₂ were determined as (9.24 ± 1.33) × 10⁻¹³ exp[−(1230 ± 40)/T] and (1.41 ± 0.26) × 10⁻¹² exp[−(1260 ± 50)/T] cm³ molecule⁻¹ s⁻¹. The random errors reported are ±2 σ, and potential systematic errors of 10% could add to the k₁ and k₂. The atmospheric lifetimes of C₂F₅OC(O)H and n-C₃F₇OC(O)H with respect to reaction with OH radicals were estimated at 3.6 and 2.6 years, respectively.     

Experimental study and modelling using the ERAS-Model of the excess molar volume of acetonitrile–alkanol mixtures at different temperatures and atmospheric pressure

Densities of {(1−x)CH₃(CH₂)_n−1OH + xCH₃CN} for n=1, 2, 3 or 4 have been determined as a function of composition at 288.15, 293.15, 298.15 and 303.15 K at atmospheric pressure using a vibrating-tube densimeter (Anton Paar DMA 4500, resolution 1×10⁻⁵ g cm⁻³). Excess molar volumes were calculated. The V_m^E values were negative for acetonitrile–methanol mixtures and sigmoid for acetonitrile–alkanols (C₂–C₄) mixtures over the complete mole fraction range. V_m^E values increase in a positive direction with increase in chain length of the alkanols and with the temperature. The Extended Real Associated Solution Model (ERAS-Model) calculations allowing for self-association for the alkanols and complex formation between acetonitrile and alkanols have been used to correlate experimental data. The model is able to reproduce the asymmetrical V_m^E behavior of the studied systems, although agreement between theoretical and experimental values is less satisfactory for some concentration ranges.     

Ab initio structural trends and torsional sensitivity in n-hexane and comparisons with crystallographic structural results

The molecular structures of n-hexane were determined by RHF/4-21G ab initio geometry optimization at 30° grid points in its three-dimensional τ₁(C11–C8–C5–C1), τ₂(C14–C11–C8–C5), τ₃(C17–C14–C11–C8) conformational space. Of the resulting 12×12×12=1728 grid structures, 468 are symmetrically non-equivalent and were optimized constraining the torsions τ₁, τ₂, and τ₃ to the respective grid points, while all other structural parameters were relaxed without any constraints. From the results, complete parameter surfaces were constructed using natural cubic spline functions, which make it possible to calculate parameter gradients, |P|=[(∂P/∂τ_i)²+(∂P/∂τ_j)²]^1/2, where P is a C–C bond length or C–C–C angle. The parameter gradients provide an effective measure of the torsional sensitivity of the system and indicate that dynamic activities in one part of the molecule can significantly affect the density of states, and thus the contributions to vibrational entropy, in another part. This opens the possibility of dynamic entropic conformational steering in complex molecules; i.e. the generation of free energy contributions from dynamic effects of one part of a molecule on another. When the conformational trends in the calculated C–C bond lengths and C–C–C angles are compared with average parameters taken from some 900 crystallographic structures containing n-hexyl fragments or longer C–C bond sequences, some correlation between calculated and experimental trends in angles is found, in contrast to the bond lengths for which the two sets of data are in complete disagreement. The results confirm experiences often made in crystallography. That is, effects of temperature, crystal structure and packing, and molecular volume effects are manifested more clearly in bond lengths than bond angles which depend mainly on intramolecular properties. Frequency analyses of the τ₁, τ₂ and τ₃ torsional angles in the crystal structures show conformational steering in the sense that, if τ₁ is trans peri-planar (170°≤τ₁≤180°; −180°≤τ₁≤−170°), the values of τ₂ and τ₃ are clustered closely around the ideal gauche (±60°) and trans (±180°) positions. In contrast, when τ₁ is in the region (50°≤τ₁≤70°), there is a definite increase in the populations of τ₂ and τ₃ at −90 and −150°.     

Separation of metal ions by capillary electrophoresis

A number of experimental parameters have been optimized for the separation of 26 metal ions, including alkali, alkaline earth, transition and lanthanide metal ions. Experimental parameters that were evaluated included nature of indirect-detection reagent, pH of electrolyte, concentration of complexing agent and nature of the surface of the capillary; unbonded and C₁ and C₁₈ bonded phases were studied. In addition the effect of internal diameter on linearity and signal-to-noise ratio was examined, and separation efficiency was determined for a variety of experimental conditions. Detection limits (signal-to-noise RATIO = 3) were ca. 1 μg/ml for the lanthanides, ca. 0.6 μg/ml for transition and alkaline earth ions and ca. 0.1–0.8 μg/ml for alkali metal ions. The average relative standard deviations of were 3.7, 5.1 and 2.5% on unbonded, C₁ and C₁₈ capillaries, respectively. Whereas conventional regression analysis suggested that the calibration curves were linear over the range of 1·10⁻⁵ to 4·10⁻⁴ mol/l, sensitivity plots showed that the results were actually linear to within 6% only over the range of 2.5·10⁻⁵ to 4·10⁻⁴ mol/l.     

Thermal decomposition study on mixed ligand thymine complexes of divalent nickel(II) with dianions of some dicarboxylic acids

Thermal decomposition of mixed ligand thymine (2,4-dihydroxy-5-methylpyrimidine) complexes of divalent Ni(II) with aspartate, glutamate and ADA (N-2-acetamido)iminodiacetate dianions was monitored by TG, DTG and DTA analysis in static atmosphere of air. The decomposition course and steps of complexes [Ni(C₅H₆N₂O₂)(C₄H₅NO₄)²⁻(H₂O)₂]·H₂O, [Ni(C₅H₆N₂O₂)(C₅H₇NO₄)²⁻(H₂O)₂]·H₂O and [Ni(C₅H₆N₂O₂)(C₆H₈N₂O₅)²⁻(H₂O)₂]·1.5H₂O were analyzed. The final decomposition products are found to be the corresponding metal oxides. The kinetic parameters namely, activation energy (E*), enthalpy (ΔH*), entropy (ΔS*) and free energy change of decomposition (ΔG*) are calculated from the TG curves using Coats–Redfern and Horowitz–Metzger equations. The stability order found for these complexes follows the trend aspartate > ADA > glutamate.     

Global minima of (C60)nCa, (C60)nF and (C60)nI clusters

Likely candidates for the lowest potential energy minima of (C₆₀)_nCa²⁺, (C₆₀)_nF⁻ and (C₆₀)_nI⁻ clusters are located using basin-hopping global optimisation. In each case, the potential energy surface is constructed using the Girifalco form for the C₆₀ intermolecular interaction, an averaged Lennard–Jones C₆₀–ion interaction, and a polarisation potential, which depends on the first few non-vanishing C₆₀ multipole polarisabilities. We find that the ions generally occupy the interstitial sites of a (C₆₀)_n cluster, the coordination shell being tetrahedral for Ca²⁺ and F⁻. The I⁻ ion has an octahedral coordination shell in the global minimum for (C₆₀)₆I⁻, however for 12  n  8 the preferred coordination geometry is trigonal prismatic.     

Large heteropolymetalate complexes formed from lanthanide (Y, Ce, Pr, Nd, Sm, Eu, Gd), nickel cations and cryptate [As4W40O140]: synthesis and structure characterization

A new family of heteropolytungstate complexes (NH₄)₂₁[Ln(H₂O)₅{Ni(H₂O)}₂As₄W₄₀O₁₄₀]·xH₂O(Ln=Y, Ce, Pr, Nd, Sm, Eu, Gd) were prepared by the reaction of Na₂₇[NaAs₄W₄₀O₁₄₀]·60H₂O with NiCl₂·6H₂O and Ln(NO₃)₃·xH₂O at pH≈4.5. The crystal structures of (NH₄)₂₁[Gd(H₂O)₅{Ni(H₂O)}₂As₄W₄₀O₁₄₀]·51H₂O was determined by X-ray diffraction analysis and element analysis. The compound crystallizes in the monoclinic space group P2₁/n with a=19.754(3), b=24.298(4), c=39.350(6) Å, β=100.612(3)°, V=18564(5) ų, Z=2, R1(wR₂)=0.0544(0.0691). The central site S1 and two opposite sites S2 of the big cyclic ligand [As₄W₄₀O₁₄₀]²⁸⁻ are occupied by one Ln³⁺and two Ni²⁺, respectively, each site supply four O_d coordinating to metal ion, another one water molecule and other five water molecules coordinate, respectively, to Ni²⁺and Ln³⁺. Polyanion [Ln(H₂O)₅{Ni(H₂O)}₂As₄W₄₀O₁₄₀]²¹⁻ has C_2v symmetry. IR and UV–vis spectra of [NaAs₄W₄₀O₁₄₀]²⁷⁻ of the title compounds are discussed.     

Capillary electrophoretic separation of dicarboxylic acids in atmospheric aerosol particles

2,3-Pyrazinedicarboxylic acid (PZDA), 2,6-pyridinedicarboxylic acid (PDA) and 2,3-pyridinedicarboxylic acid (QUIN) solutions were studied as background electrolytes (BGEs) in the capillary electrophoretic analysis of dicarboxylic acids in aerosol particles with indirect UV detection. The BGEs were selected on the basis of similarity in structure with the analytes so that mobilities would be compatible. Optimised pH values for PZDA, PDA and QUIN solutions were 10.6, 11.0 and 10.2, respectively. Myristyltrimethylammonium hydroxide and myristyltrimethylammonium bromide were added to reverse the electroosmotic flow in the solutions in the direction of anode to enable fast anion detection. Separation was obtained for nine dicarboxylic acids (C₂–C₁₀) differing in the number of CH₂ groups in their skeleton. The electrophoretic mobilities were determined to lie in the range 3.0×10⁻⁴–7.0×10⁻⁴ cm² V⁻¹ s⁻¹. The relative standard deviations (RSDs) for the absolute migration times of the analytes were mostly less than 0.5% (n=6) in PZDA solution. In PDA solution the within-day and day-to-day RSD values for migration were less than 1% and between 2 and 4%, respectively. Peak heights and areas mostly deviated between 1 and 15% in both PZDA and PDA solutions. Detection limits ranged between 1 and 5 mg/l. Methods were applied to the analysis of dicarboxylic acids isolated from aerosol particles.     

Temperature dependence of the reaction C2H (C2D) + O2 between 295 and 700 K

The rate coefficients for the reactions of C₂H and C₂D with O₂ have been measured in the temperature range 295 K T 700 K. Both reactions show a slightly negative temperature dependence in this temperature range, with k_C2H+O2 = (3.15 ± 0.04) × 10⁻¹¹ (T/295 K)^{−(0.16 ± 0.02)} cm³ molecule⁻¹ s⁻¹. The kinetic isotope effect is k_C2H/k_C2D = 1.04 ± 0.03 and is constant with temperature to within experimental error. The temperature dependence and the C₂H + O₂ kinetic isotope effect are consistent with a capture-limited metathesis reaction, and suggest that formation of the initial HCCOO adduct is rate-limiting.     

The electrolyte NRTL model and speciation approach as applied to multicomponent aqueous solutions of H2SO4, Fe2(SO4)3, MgSO4 and Al2(SO4)3 at 230–270 °C

This work presents chemical modeling of solubilities of metal sulfates in aqueous solutions of sulfuric acid at high temperatures. Calculations were compared with experimental solubility measurements of hematite (Fe₂O₃) in aqueous ternary and quaternary systems of H₂SO₄, MgSO₄ and Al₂(SO₄)₃ at high temperatures. A hybrid model of ion-association and electrolyte non-random two liquid (ENRTL) theory was employed to fit solubility data in three ternary systems H₂SO₄–MgSO₄–H₂O, H₂SO₄–Al₂(SO₄)₃–H₂O at 235–270 °C and H₂SO₄–Fe₂(SO₄)₃–H₂O at 150–270 °C. Employing the Aspen Plus™ property program, the electrolyte NRTL local composition model was used for calculating activity coefficients of the ions Al³⁺, Mg²⁺ Fe³⁺ and SO₄²⁻, HSO₄⁻, OH⁻, H₃O⁺, respectively, as well as molecular species. The solid phases were hydronium alunite (H₃O)Al₃(SO₄)₂(OH)₆, hematite Fe₂O₃ and magnesium sulfate monohydrate (MgSO₄)·H₂O which were employed as constraint precipitation solids in calculating the metal sulfate solubilities. A correlation for the equilibrium constants of the association reactions of complex species versus temperature was implemented. Based on the maximum-likelihood principle, the binary interaction energy parameters for the ionic species as well as the coefficients for equilibrium constants of the reactions were obtained simultaneously using the solubility data of the ternary systems. Following that, the solubilities of metal sulfates in the quaternary systems H₂SO₄–Fe₂(SO₄)₃–MgSO₄–H₂O, H₂SO₄–Fe₂(SO₄)₃–Al₂(SO₄)₃–H₂O at 250 °C and H₂SO₄–Al₂(SO₄)₃–MgSO₄–H₂O at 230–270 °C were predicted. The calculated results were in excellent agreement with the experimental data.     

Kinetics and mechanism of the gas phase reaction of Cl atoms with iodobenzene

Smog chamber/FTIR techniques were used to study the kinetics and mechanism of the reaction of Cl atoms with iodobenzene (C₆H₅I) in 20–700 Torr of N₂, air, or O₂ diluent at 296 K. The reaction proceeds with a rate constant k(Cl+C₆H₅I)=(3.3±0.7)×10⁻¹¹ cm³ molecule⁻¹ s⁻¹ to give chlorobenzene (C₆H₅Cl) in a yield which is indistinguishable from 100%. The title reaction proceeds via a displacement mechanism (probably addition followed by elimination).     

Synthesis of methyltrioxorhenium(VII) arylamine complexes and mono- and bis(ortho)-chelated arylaminorhenium(VII) trioxides

From the reaction of MeReO₃ with the neutral arylamine C₆H₅CH₂NMe₂ and the aryldiamine C₆H₄(CH₂NMe₂)₂−1,3, have been isolated in good yields the 1/1 adduct complex [MeReO₃ · C₆H₅CH₂NMe₂], 1, and the 2/1 adduct complex [(MeReO₃)₂ · C₆H₄(CH₂NMe₂)₂− 1,3], 2, respectively. The X-ray molecular structure of 2 shows that both rhenium centres have a trigonal bipyramidal geometry and in the axial positions of each rhenium centre are one of the NMe₂ units of the aryldiamine ligand and a methyl group. The mono(ortho)-chelated arylaminorhenium trioxide complex [ReO₃(C₆H₄CH₂NMe₂−2], 3, can be synthesized by a transmetallation reaction of ClReO₃ with [ZnC₆H₄CH₂NMe₂−2₂] in a 2:1 molar ratio. In a similar way the bis(ortho)-chelated arylaminorhenium trioxide complex [ReO₃C₆H₃(CH₂NMe₂)₂−2,6], 4, can be synthesized by addition of a mixture of [Li₂C₆H₃(CH₂NMe₂)₂−2,6₂] and ZnCl₂ to ClReO₃. Complexes 3 and 4 have been isolated as white solids in 66% and 81% yields respectively. The rhenium centre in complex 4 has a bicapped tetrahedral geometry in which the monoanionic C₆H₃(CH₂NMe₂)₂−2,6⁻ ligand is pseudo-facially bonded with a characteristic N1-Re-N2 angle of 107.7(3)°, a Re-C_ipso bond length of 2.112(11) Å and Re-N1 and Re-N2 bond lengths of 2.518(9) Å and 2.480(8) Å respectively.     

Metastable phases in kinetics of phase transformations in the frozen liquid crystal 4-ethoxybenzylidene-4'-n-butylaniline

The nematogen 4-ethoxybenzylidene-4'-n-butylaniline gives by fast cooling a frozen phase called C₁ different from a glassy nematic state. The X-ray diffraction spectra of a non-aligned sample and a sample aligned by a magnetic field show that the C₁ phase is a monolayer smectic phase: molecules are inclined to the normal of the smectic planes by an angle of 35° ± 5°. On reheating we obtain metastable phases more and more ordered; those phases C₂ and C₃ are crystalline. The kinetics for the metastable phases correspond to a nucleation growth process of the same type (n = 2) for the two transformations C₁→C₂→C₂. If we assume a thermal process the growth is monodimensional.     

Ab initio calculations on some transition metal heptoxides by using effective core potentials

The ab initio molecular structures and vibrational frequencies for several transition metal heptoxides X₂O₇ⁿ⁻ (n=0, 2, 4) were calculated using effective core potentials at the HF and DFT (B3LYP) levels. The relative merits of different valence basis set arrangements were tested by comparison with experimental results available, in particular with gas-phase Re₂O₇ molecular structure and vibrational frequencies. The calculations were then extended to other heptoxides of the VB, VIB and VIIB transition metal groups. The results indicate that a staggered geometry (either D_3d or C₂) is the energy minimum for most of the heptoxides studied. The only exceptions are Mn₂O₇, which clearly prefers an eclipsed C_2v(syn) configuration, and Tc₂O₇, for which C₂ and C_2v(syn) geometries have nearly the same energy.

Particular attention was given to the magnitude of the X–O–X bond angle, as this structural parameter has been a matter of some controversy. The calculated values range from 125° (Mn₂O₇) to 180° (Group VB heptoxides) and depend on the position of the transition metal in the Periodic Table. A tendency for linearity of the X–O–X moiety on going both downwards the group and backwards the period was observed and discussed.     

Hydrogen bonds in the crystal packings of mesalazine and mesalazine hydrochloride

The crystal structures of pharmaceutical product mesalazine (marketed also under different proprietary names as Salofalk, Asacol, Asacolitin, and Claversal) and its hydrochloride are reported. In the crystal mesalazine is in zwitterion form as 5-ammoniosalicylate (1) whereas mesalazine hydrochloride crystallizes in an ionized form as 5-ammoniosalicylium chloride (2). Compound 1 (C₇H₇O₃N) crystallizes in the monoclinic space group P2₁/n with a = 3.769(1) Å, b = 7.353(2) Å, c = 23.475(5) Å, β = 94.38(2)°, V = 648.7(8) ų, Z = 4, D_c = 1.568 g cm⁻³ and μ(MoK) = 1.2 cm⁻¹. Compound 2 (C₇H₈O₃NCl) crystallizes in the triclinic space group P with a = 4.4839(2) Å, b = 5.7936(2) Å, c = 15.6819(5) Å, = 81.329(3)°, β = 88.026(3)°, γ = 79.317(4)°, V = 395.74(3) ų, Z = 2, D_c = 1.591 g cm⁻³ and μ(CuK) = 40.8 cm⁻¹. The crystal structures were solved by direct methods and refined to R = 0.041 for 1 and 0.028 for 2, using 607 and 1374 observed reflections, respectively. The configuration of both molecules, with the ortho hydroxyl to a carboxyl group, favours the intramolecular hydrogen bonds. Very complex systems of intermolecular hydrogen bonds were observed in both crystal packings. They are discussed in terms of graph-set notation. The mesalazine crystal structure is characterized by two-dimensional network of hydrogen bonds in the ab plane. The crystal structure pattern of mesalazine hydrochloride is a three-dimensional network significantly supported by N⁺---HCl⁻ interactions.     

Hydrothermal syntheses and crystal structures of bimetallic cluster complexes [{Cd(phen)2}2V4O12]·5H2O and [Ni(phen)3]2[V4O12]·17.5H2O

The hydrothermal reactions of vanadium oxide starting materials with divalent transition metal cations in the presence of nitrogen donor chelating ligands yield the bimetallic cluster complexes with the formulae [{Cd(phen₂)₂V₄O₁₂]·5H₂O (1) and [Ni(phen)₃]₂[V₄O₁₂]·17.5H₂O (2). Crystal data: C₄₈H₅₂Cd₂N₈O₂₂V₄ (1), triclinic. a=10.3366(10), b=11.320(3), c=13.268(3) Å, =103.888(17)°, β=92.256(15)°, γ=107.444(14)°, Z=1; C₇₂H₁₃₁N₁₂Ni₂O_29.5V₄ (2), triclinic. a=12.305(3), b=13.172(6), c=15.133(4), =79.05(3)°, β=76.09(2)°, γ=74.66(3)°, Z=1. Data were collected on a Siemens P4 four-circle diffractometer at 293 K in the range 1.59° <θ<26.02° and 2.01°<θ<25.01° using the ω-scan technique, respectively. The structure of 1 consists of a [V₄O₁₂]⁴⁻ cluster covalently attached to two {Cd(phen)₂}²⁺ fragments, in which the [V₄O₁₂]⁴⁻ cluster adopts a chair-like configuration. In the structure of 2, the [V₄O₁₂]⁴⁻ cluster is isolated. And the complex formed a layer structure via hydrogen bonds between the [V₄O₁₂]⁴⁻ unit and crystallization water molecules.     

Crystalline calcium phenylphosphonate—thermodynamic data on n-alkylmonoamine intercalations

Lamellar crystalline calcium phenylphosphonate, as anhydrous Ca(HO₃PC₆H₅)₂ and hydrated Ca(HO₃PC₆H₅)₂·2H₂O compounds, were used as hosts for intercalation of polar n-alkylmonoamine molecules of the general formula CH₃(CH₂)_nNH₂ (n=0–4, 7) in water or 1,2-dichloroethane. An increase in the interlayer distance was observed. The exothermic enthalpic values for intercalation increased with the number of carbon atoms and with increasing concentration of the amines. The intercalation followed by a titration procedure in the solid/liquid interface with Ca(HO₃PC₆H₅)₂·2H₂O and Ca(HO₃PC₆H₅)₂ gave the enthalpy/number of carbons correlations: Δ_intH=−(1.74±0.43)–(1.30±0.13)n_c and Δ_intH=−(4.15±0.15)–(1.07±0.03)n_c, for water and 1,2-dichloroethane, respectively. A similar correlation Δ_intH=−(4.27±0.80)–(1.85±0.21)n_c was obtained in water by using the ampoule breaking procedure for Ca(HO₃PC₆H₅)₂·2H₂O. The increase in exothermic enthalpic values with the increase in n-aliphatic carbon atoms is more pronounced for the anhydrous compound and also when using the ampoule breaking procedure. The Gibbs free energies are negative. Positive entropic values favor intercalation in these systems.     

Cationic cobaltammine as anion receptor: Synthesis, characterization, single crystal X-ray structure and packing analysis of hexaamminecobalt(III) chloride (R,R)-tartrate monohydrate

In an effort to utilize the [Co(NH₃)₆]³⁺ cation as a new anion receptor (binding agent) for dihydroxy dicarboxylate anion i.e., tartrate, orange single crystals of hexaamminecobalt(III) chloride (R,R)-tartrate monohydrate, [Co(NH₃)₆]Cl(C₄H₄O₆)·H₂O, were obtained by reacting hexaamminecobalt(III) chloride with potassium–sodium tartrate tetrahydrate in a 1:1 molar ratio in hot water. The single crystal X-ray structure determination of [Co(NH₃)₆]Cl(C₄H₄O₆)·H₂O revealed that a distinctive network of hydrogen bonding interactions (N–HO, N–HCl⁻, O–HO) stabilize the crystal lattice. This is the first complex salt of hexaamminecobalt(III) with dihydroxy dicarboxylate anion i.e., tartrate.     

Metallorganische verbindungen der lanthanoide LVIII. Zur struktur des dicyclopentadienyl-bis(trimethylsilyl)lutetat-anions

(C₅H₅)₂Lu(μ-Cl₂)Na(dme)₂ reacts with LiSi(CH₃)₃ in dimethoxyethane with formation of [Li(dme)₃][(C₅H₅)₂Lu(Si(CH₃)₃)₂]. The crystal structure study shows the compound to consist of discrete ions [Li(dme)₃]⁺ and [(C₅H₅)₂Lu(Si(CH₃)₃)₂]⁻. The compound crystallizes in the space group P2/n with a 14.497(5) b 9.041(2), c 14.672(6) Å, β 103.85(3)° and V 1867(2) ų. The crystal and molecular structure was refined to R = 0.0473 for 2491 observed reflections with F_o 3σ(F_o).     

Characterization and decomposition mechanism of an unusual nickel, thiocyanate and 4-methylpyridine polymeric complex

The synthesis, characterization, and thermal decomposition of the [Ni(SCN)₂(H⁺SCN)₂(4-mepy)₂] compound with an octahedral structure in polymeric chain were reported, in which SCN groups form bridges among Ni(II) ions. The compound decomposes in water resulting in a pH<4 solution. The FT-IR spectrum presented doublet bands at 2117; 2128 cm⁻¹, 788; 773 cm⁻¹ assigned to ν(C---N) and ν(C---S) stretching modes, respectively, and δ(SCN) deformation modes at 468; 476 cm⁻¹. The Raman spectrum of the compound presented the ν(C---N) stretching as a strong doublet at 2122; 2128 cm⁻¹, ν(C---S) at 783; 770 cm⁻¹, and δ(SCN) at 468; 477 cm⁻¹. No significant changes were observed in the 4-mepy ligand bands compared with the vibrational frequencies of the pure compound or the compound in aqueous solution 0.2 mol l⁻¹. The crystal UV–vis reflectance spectrum presented two bands centered in 626 and 424 nm tentatively assigned to the d→d type transitions, ³A_2g→³T_1g and ³A_2g→³T_1g, for a symmetry close to O_h. The TG curve showed a mass loss between 120 and 200 °C assigned to the loss of the two 4-mepy molecules; from 200 to 265 °C, the loss of the two H⁺SCN groups; and from 265 to 450 °C, the loss of the two SCN groups that formed the bridges among the nickel atoms. Based on these mass loss data, a mechanism of thermal decomposition for the compound was proposed.