Operator method for solving the plane elasticity problem for a strip with periodic cuts

In the present paper, we use the conformal mapping z/c = ζ?2a sin ζ (a, c?const, ζ = u + iv) of the strip {|v| ≤ v ₀, |u| < ∞} onto the domain D, which is a strip with symmetric periodic cuts. For the domain D, in the orthogonal system of isometric coordinates u, v, we solve the plane elasticity problem. We seek the biharmonic function in the form F = C ψ ₀ + S ψ*₀ + x(C ψ ₁ ? S ψ ₂) + y(C ψ ₂ + S ψ ₁), where C(v) and S(v) are the operator functions described in [1] and ψ ₀(u), …, ψ ₂(u) are the desired functions. The boundary conditions for the function F posed for v = ±v ₀ are equivalent to two operator equations for ψ ₁(u) and ψ ₂(u) and to two ordinary differential equations of first order for ψ ₀(u) and ψ*₀(u) [2]. By finding the functions ψ _j (u) in the form of trigonometric series with indeterminate coefficients and by solving the operator equations, we obtain infinite systems of linear equations for the unknown coefficients. We present an efficient method for solving these systems, which is based on studying stable recursive relations. In the present paper, we give an example of analysis of a specific strip (a = 1/4, v ₀ = 1) loaded on the boundary v = v ₀ by a normal load of intensity p. We find the particular solutions corresponding to the extension of the strip by the longitudinal force X ^∞ and to the transverse and pure bending of the strip due to the transverse force Y ^∞ and the constant moment M ^∞, respectively. We also present the graphs of normal and tangential stresses in the transverse cross-section x = 0 and study the stress concentration effect near the cut bottom.     

Several three-dimensional solutions for transversely isotropic functionally graded material plate welded with circular inclusion

The problem of a transversely isotropic functionally graded material (FGM) plate welded with a circular inclusion is considered. The analysis starts with the generalized England-Spencer plate theory for transversely isotropic FGM plates, which expresses a three-dimensional (3D) general solution in terms of four analytic functions. Several analytical solutions are then obtained for an infinite FGM plate welded with a circular inclusion and subjected to the loads at infinity. Three different cases are considered, i.e., a rigid circular inclusion fixed in the space, a rigid circular inclusion rotating about the x-, y-, and z-axes, and an elastic circular inclusion with different material constants from the plate itself. The static responses of the plate and/or the inclusion are investigated through numerical examples.     

Linearized Stability for Semiflows Generated by a Class of Neutral Equations,with Applications to State-Dependent Delays

We prove a principle of linearized stability for semiflows generated by neutral functional differential equations of the form x′(t) = g(? x _t , x _t ). The state space is a closed subset in a manifold of C ²-functions. Applications include equations with state-dependent delay, as for example x′(t) = a x′(t + d(x(t))) + f (x(t + r(x(t)))) with \({a\in\mathbb{R}, d:\mathbb{R}\to(-h,0), f:\mathbb{R}\to\mathbb{R}, r:\mathbb{R}\to[-h,0]}\).     

On the orders of the best approximations of integrals of functions by integrals of rank <Emphasis Type="Italic">σ</Emphasis>

We study the values e _σ(f) of the best approximation of integrals of functions from the spaces L _p (A, dμ) by integrals of rank σ. We determine the orders of the least upper bounds of these values as σ → ∞ in the case where the function ? is the product of two nonnegative functions one of which is fixed and the other varies on the unit ball U _p (A) of the space L _p (A, dμ). We consider applications of the obtained results to approximation problems in the spaces S _p ^? .     

Regularity and Singularities of Optimal Convex Shapes in the Plane

We focus here on the analysis of the regularity or singularity of solutions Ω ₀ to shape optimization problems among convex planar sets, namely:

$J(\Omega_{0})={\rm min} \{J(\Omega), \Omega \quad {\rm convex},\Omega \in \mathcal{S}_{\rm ad}\},$

where \({\mathcal{S}_{\rm ad}}\) is a set of 2-dimensional admissible shapes and \({J:\mathcal{S}_{\rm ad}\rightarrow\mathbb{R}}\) is a shape functional. Our main goal is to obtain qualitative properties of these optimal shapes by using first and second order optimality conditions, including the infinite dimensional Lagrange multiplier due to the convexity constraint. We prove two types of results:

1. i)
   under a suitable convexity property of the functional J, we prove that Ω ₀ is a W ^2,p -set, \({p\in[1, \infty]}\). This result applies, for instance, with p = ∞ when the shape functional can be written as J(Ω) = R(Ω) + P(Ω), where R(Ω) = F(|Ω|, E _f (Ω), λ₁(Ω)) involves the area |Ω|, the Dirichlet energy E _f (Ω) or the first eigenvalue of the Laplace–Dirichlet operator λ₁(Ω), and P(Ω) is the perimeter of Ω;
    

1. ii)
   under a suitable concavity assumption on the functional J, we prove that Ω ₀ is a polygon. This result applies, for instance, when the functional is now written as J(Ω) = R(Ω) ? P(Ω), with the same notations as above.
    

     

Bistable Boundary Reactions in Two Dimensions

In a bounded domain \({\Omega \subset \mathbb R^2}\) with smooth boundary we consider the problem

$\Delta u = 0 \quad {\rm{in }}\, \Omega, \qquad \frac{\partial u}{\partial \nu} = \frac1\varepsilon f(u) \quad {\rm{on }}\,\partial\Omega,$

where ν is the unit normal exterior vector, ε > 0 is a small parameter and f is a bistable nonlinearity such as f(u) = sin(π u) or f(u) = (1 ? u ²)u. We construct solutions that develop multiple transitions from ?1 to 1 and vice-versa along a connected component of the boundary ?Ω. We also construct an explicit solution when Ω is a disk and f(u) = sin(π u).

     

A method of solving the diffusion problem for a vortex layer in a viscoplastic half-plane

A method is proposed to reduce the classical formulation of the problem to a system of two functional equations whose solution can be found numerically. A number of assertions that characterize the behavior of a rigid zone are proved. In particular, the lower estimate h ⁰(t) = 2b√t for the boundary motion is obtained; an explicit expression for b is given as a boundary stress function.     

Power-law creep and residual stresses in a carbopol gel

We report on the interplay between creep and residual stresses in a carbopol microgel. When a constant shear stress σ is applied below the yield stress σ _y, the strain is shown to increase as a power law of time, γ(t) = γ ₀ + (t/τ) ^α , with an exponent α = 0.39 ± 0.04 that is strongly reminiscent of Andrade creep in hard solids. For applied shear stresses lower than some typical value σ _c ? 0.2σ _y, the microgel experiences a more complex, anomalous creep behavior, characterized by an initial decrease of the strain, that we attribute to the existence of residual stresses of the order of σ _c that persist after a rest time under a zero shear rate following preshear. The influence of gel concentration on creep and residual stresses are investigated as well as possible aging effects. We discuss our results in light of previous works on colloidal glasses and other soft glassy systems.     

Planar Vector Fields with a Given Set of Orbits

We determine all the \({\mathcal{C}^1}\) planar vector fields with a given set of orbits of the form y ? y(x) = 0 satisfying convenient assumptions. The case when these orbits are branches of an algebraic curve is also study. We show that if a quadratic vector field admits a unique irreducible invariant algebraic curve \({g(x, y) = \sum_{j=0}^S a_j(x) y^{S-j}= 0}\) with S branches with respect to the variable y, then the degree of the polynomial g is at most 4S.     

Analysis on nonlinear turning motion of multi-spherical soft robots

A modular multi-spherical soft robot, which consists of five deformable spherical cells, two friction feet, the electromagnetic valves and the control systems, is constructed. According to the deflating action and the inflating action of the spherical cells, the size and the shape of each spherical cell can be changed. With two friction feet sticking with the ground in turn, the soft robot can move forwards, make a turning motion and avoid the obstacle. This paper creates a nonlinear relation between the pressure P and the inflation radius \(\left( r \right) \) at different original radii \(\left( {r_0 } \right) \) and obtains the inflation or deflation velocity \(v_r \). Six inflating and deflating steps to finish the turning motion are presented. Based on the geometric relationship between the inflation radius (r) and the original radius \((r_0 )\) of each cell, the nonlinear turning process is described to control the center positions (x, y, z) of the spherical cell. Last, a simulation and an experiment of five spherical cells are shown to emulate the turning process. Experiment results show that the robot has a maximum turning capability of \(20{^{\circ }}\) in one period.     

Decay of Almost Periodic Solutions¶of Conservation Laws

We consider the asymptotic behavior of solutions of systems of inviscid or viscous conservation laws in one or several space variables, which are almost periodic in the space variables in a generalized sense introduced by Stepanoff and Wiener, which extends the original one of H. Bohr. We prove that if u(x,t) is such a solution whose inclusion intervals at time t, with respect to ?>0, satisfy l _epsiv;(t)/t→0 as t→∞, and such that the scaling sequence u ^T (x,t)=u(T x,T t) is pre-compact as t→∞ in L _loc ¹(? ^{d +1} ₊, then u(x,t) decays to its mean value \(\), which is independent of t, as t→∞. The decay considered here is in L ¹ _loc of the variable ξ≡x/t, which implies, as we show, that \(\) as t→∞, where M _x denotes taking the mean value with respect to x. In many cases we show that, if the initial data are almost periodic in the generalized sense, then so also are the solutions. We also show, in these cases, how to reduce the condition on the growth of the inclusion intervals l _?(t) with t, as t→∞, for fixed ? > 0, to a condition on the growth of l _?(0) with ?, as ?→ 0, which amounts to imposing restrictions only on the initial data. We show with a simple example the existence of almost periodic (non-periodic) functions whose inclusion intervals satisfy any prescribed growth condition as ?→ 0. The applications given here include inviscid and viscous scalar conservation laws in several space variables, some inviscid systems in chromatography and isentropic gas dynamics, as well as many viscous 2 × 2 systems such as those of nonlinear elasticity and Eulerian isentropic gas dynamics, with artificial viscosity, among others. In the case of the inviscid scalar equations and chromatography systems, the class of initial data for which decay results are proved includes, in particular, the L ^∞ generalized limit periodic functions. Our procedures can be easily adapted to provide similar results for semilinear and kinetic relaxations of systems of conservation laws.     

Simultaneous impacts of MHD and variable wall temperature on transient mixed Casson nanofluid flow in the stagnation point of rotating sphere

A numerical analysis is provided to scrutinize time-dependent magnetohydrodynamics(MHD) free and forced convection of an electrically conducting non-Newtonian Casson nanofluid flow in the forward stagnation point region of an impulsively rotating sphere with variable wall temperature. A single-phase flow of nanofluid model is reflected with a number of experimental formulae for both effective viscosity and thermal conductivity of nanofluid. Exceedingly nonlinear governing partial differential equations(PDEs)subject to their compatible boundary conditions are mutated into a system of nonlinear ordinary differential equations(ODEs). The derived nonlinear system is solved numerically with implementation of an implicit finite difference procedure merging with a technique of quasi-linearization. The controlled parameter impacts are clarified by a parametric study of the entire flow regime. It is depicted that from all the exhibited nanoparticles,Cu possesses the best convection. The surface heat transfer and surface shear stresses in the x-and z-directions are boosted with maximizing the values of nanoparticle solid volume fraction ? and rotation λ. Besides, as both the surface temperature exponent n and the Casson parameter γ upgrade, an enhancement of the Nusselt number is given.     

Regularity of Optimal Maps on the Sphere: the Quadratic Cost and the Reflector Antenna

Building on the results of Ma et al. (in Arch. Rational Mech. Anal. 177(2), 151–183 (2005)), and of the author Loeper (in Acta Math., to appear), we study two problems of optimal transportation on the sphere: the first corresponds to the cost function d ²(x, y), where d(·, ·) is the Riemannian distance of the round sphere; the second corresponds to the cost function ?log |x ? y|, known as the reflector antenna problem. We show that in both cases, the cost-sectional curvature is uniformly positive, and establish the geometrical properties so that the results of Loeper (in Acta Math., to appear) and Ma et al. (in Arch. Rational Mech. Anal. 177(2), 151–183 (2005)) can apply: global smooth solutions exist for arbitrary smooth positive data and optimal maps are Hölder continuous under weak assumptions on the data.     

Strong Uniqueness Theorems and the Phragmèn–Lindelöf Principle in Nonhomogeneous Elastostatics

We find sharp uniqueness classes for the contact problem of nonhomogeneous linear elastostatics in exterior domains. Moreover, we prove that a solution of the displacement problem in a cone of aperture φ enjoys the asymptotic properties expressed by the classical Phragmèn–Lindelöf principle; in particular, uniqueness holds in the class of all functions that are bounded at large distance by r ^{1/c φ} for some positive c. Then, by means of a counter–example we observe that the same properties are no longer satisfied by the solutions of the contact problem.     

On relations for general two-dimensional ideal plasticity problems under the full plasticity condition

Relations for two-dimensional ideal plasticity problems under the full plasticity condition are determined with material anisotropy, inhomogeneity, and compressibility properties taken into account. These properties are determined by the direction cosines of the principal stress, the coordinates of points in space, and the mean stress.For the yield strength we take a function of the form k = k(σ, n ₁, n ₂, n ₃, x, y, z). The desired relations are determined for the general plane ideal plasticity problem. The relations thus obtained are generalized to the cases of axisymmetric and spherical plasticity problems.     

Superconvergence analysis of bi-<Emphasis Type="Italic">k</Emphasis>-degree rectangular elements for two-dimensional time-dependent Schrödinger equation

Superconvergence has been studied for long, and many different numerical methods have been analyzed. This paper is concerned with the problem of superconvergence for a two-dimensional time-dependent linear Schrödinger equation with the finite element method. The error estimate and superconvergence property with order O(h^k+1) in the H¹ norm are given by using the elliptic projection operator in the semi-discrete scheme. The global superconvergence is derived by the interpolation post-processing technique. The superconvergence result with order O(h^k+1 + τ²) in the H¹ norm can be obtained in the Crank-Nicolson fully discrete scheme.     

On Properties of the Generalized Wasserstein Distance

The Wasserstein distances W_p (p \({\geqq}\) 1), defined in terms of a solution to the Monge–Kantorovich problem, are known to be a useful tool to investigate transport equations. In particular, the Benamou–Brenier formula characterizes the square of the Wasserstein distance W₂ as the infimum of the kinetic energy, or action functional, of all vector fields transporting one measure to the other. Another important property of the Wasserstein distances is the Kantorovich–Rubinstein duality, stating the equality between the distance W₁(μ, ν) of two probability measures μ, ν and the supremum of the integrals in d(μ ?ν) of Lipschitz continuous functions with Lipschitz constant bounded by one. An intrinsic limitation of Wasserstein distances is the fact that they are defined only between measures having the same mass. To overcome such a limitation, we recently introduced the generalized Wasserstein distances \({W_p^{a,b}}\), defined in terms of both the classical Wasserstein distance W_p and the total variation (or L¹) distance, see (Piccoli and Rossi in Archive for Rational Mechanics and Analysis 211(1):335–358, 2014). Here p plays the same role as for the classic Wasserstein distance, while a and b are weights for the transport and the total variation term. In this paper we prove two important properties of the generalized Wasserstein distances: (1) a generalized Benamou–Brenier formula providing the equality between \({W_2^{a,b}}\) and the supremum of an action functional, which includes a transport term (kinetic energy) and a source term; (2) a duality à la Kantorovich–Rubinstein establishing the equality between \({W_1^{1,1}}\) and the flat metric.     

Complex Dynamics in a ODE Model Related to Phase Transition

Motivated by some recent studies on the Allen–Cahn phase transition model with a periodic nonautonomous term, we prove the existence of complex dynamics for the second order equation

$$\begin{aligned} -\ddot{x} + \left( 1 + \varepsilon ^{-1} A(t)\right) G'(x) = 0, \end{aligned}$$

where A(t) is a nonnegative T-periodic function and \(\varepsilon > 0\) is sufficiently small. More precisely, we find a full symbolic dynamics made by solutions which oscillate between any two different strict local minima \(x_0\) and \(x_1\) of G(x). Such solutions stay close to \(x_0\) or \(x_1\) in some fixed intervals, according to any prescribed coin tossing sequence. For convenience in the exposition we consider (without loss of generality) the case \(x_0 =0\) and \(x_1 = 1\).

     

Consequences of the Translation Invariance on the Darcy Free Convection Flow Past a Vertical Surface

It is shown that the governing equation for the stream function of the Darcy free convection boundary layer flows past a vertical surface is invariant under arbitrary translations of the transverse coordinate y. The consequences of this basic symmetry property on the solutions corresponding to a prescribed surface temperature distribution T _w (x) are investigated. It is found that starting with a “primary solution” which describes the temperature boundary layer on an impermeable surface, infinitely many “translated solutions” can be generated which form a continuous group, the “translation group” of the given primary solution. The elements of this group describe free convection boundary layer flows from permeable counterparts of the original surface with a transformed temperature distribution \({\tilde {T}_w \left( x \right)}\), when simultaneously a suitable lateral suction/injection of the fluid is applied. It turns out in this way that several exact solutions discovered during the latter few decades are in fact not basically new solutions, but translated counterparts of some formerly reported primary solutions. A few specific examples are discussed in detail.     

Effects of Fuel Lewis Number on Localised Forced Ignition of Globally Stoichiometric Stratified Mixtures: a Numerical Investigation

The influences of fuel Lewis number Le_F on localised forced ignition of globally stoichiometric stratified mixtures have been analysed using three-dimensional compressible Direct Numerical Simulations (DNS) for cases with Le_F ranging from 0.8 to 1.2. The globally stoichiometric stratified mixtures with different values of root-mean-square (rms) equivalence ratio fluctuation (i.e. ?^′= 0.2, 0.4 and 0.6) and the Taylor micro-scale l_? of equivalence ratio ? variation (i.e. l_?/l_f= 2.1, 5.5 and 8.3 with l_f being the Zel’dovich flame thickness of the stoichiometric laminar premixed flame) have been considered for different initial rms values of turbulent velocity u^′. A pseudo-spectral method is used to initialise the equivalence ratio variation following a presumed bi-modal distribution for prescribed values of ?^′ and l_?/l_f for global mean equivalence ratio 〈?〉=1.0. The localised ignition is accounted for by a source term in the energy transport equation that deposits energy for a stipulated time interval. It has been observed that the maximum values of temperature and the fuel reaction rate magnitude increase with decreasing Le_F during the period of external energy deposition. The initial values of Le_F, u^′/S_b(?=1), ?^′ and l_?/l_f have been found to have significant effects on the extent of burning of the stratified mixtures following localised ignition. For a given value of u^′/S_b(?=1), the extent of burning decreases with increasing Le_F. An increase in u^′ leads to a monotonic reduction in the burned gas mass for all values of Le_F in all stratified mixture cases but an opposite trend is observed for the Le_F=0.8 homogeneous mixture. It has been found that an increase in ?^′ has adverse effects on the burned gas mass, whereas the effects of l_?/l_f on the extent of burning are non-monotonic and dependent on ?^′ and Le_F. Detailed physical explanations have been provided for the observed Le_F, u^′/S_b(?=1), ?^′ and l_?/l_f dependences.