Biomimetic anchors for antifouling and antibacterial polymer brushes on stainless steel

Barnacle cement (BC) was beneficially applied on stainless steel (SS) to serve as the initiator anchor for surface-initiated polymerization. The amine and hydroxyl moieties of barnacle cement reacted with 2-bromoisobutyryl bromide to provide the alkyl halide initiator for the surface-initiated atom transfer radical polymerization (ATRP) of 2-hydroxyethyl methacrylate (HEMA). The hydroxyl groups of HEMA polymer (PHEMA) were then converted to carboxyl groups for coupling of chitosan (CS) to impart the SS surface with both antifouling and antibacterial properties. The surface-functionalized SS reduced bovine serum albumin adsorption, bacterial adhesion, and exhibited antibacterial efficacy against Escherichia coli (E. coli). The effectiveness of barnacle cement as an initiator anchor was compared to that of dopamine, a marine mussel inspired biomimetic anchor previously used in surface-initiated polymerization. The results indicate that the barnacle cement is a stable and effective anchor for functional surface coatings and polymer brushes.     

Functionalization of nylon membranes via surface-initiated atom-transfer radical polymerization

The ability to manipulate and control the surface properties of nylons is of crucial importance to their widespread applications. In this work, surface-initiated atom-transfer radical polymerization (ATRP) is employed to tailor the functionality of the nylon membrane and pore surfaces in a well-controlled manner. A simple two-step method, involving the activation of surface amide groups with formaldehyde and the reaction of the resulting N-methylol polyamide with 2-bromoisobutyryl bromide, was first developed for the covalent immobilization of ATRP initiators on the nylon membrane and its pore surfaces. Functional polymer brushes of 2-hydroxyethyl methacrylate (HEMA) and poly(ethylene glycol)monomethacrylate (PEGMA) were prepared via surface-initiated ATRP from the nylon membranes. A kinetics study revealed that the chain growth from the membranes was consistent with a "controlled" process. The dormant chain ends of the grafted HEMA polymer (P(HEMA)) and PEGMA polymer (P(PEGMA)) on the nylon membranes could be reactivated for the consecutive surface-initiated ATRP to produce the corresponding nylon membranes functionalized by P(HEMA)-b-P(PEGMA) and P(PEGMA)-b-P(HEMA) diblock copolymer brushes. In addition, membranes with grafted P(HEMA) and P(PEGMA) brushes exhibited good resistance to protein adsorption and fouling under continuous-flow conditions.     

Surface-initiated Atom-transfer Radical Polymerization from Polyimide Films and Their Anti-fouling Properties

A simple one-step method for the chloromethylation of polyimide (PI) under mild conditions was used to introduce benzyl chloride groups into PI film surface. Covalently tethered hydrophilic polymer brushes of poly(ethylene glycol) monomethacrylate (PEGMA) and glycidyl methacrylate (GMA) were prepared via surface initiated atom-transfer radical polymerization (ATRP) from the chloromethylated PI surfaces using benzyl chloride groups as the active ATRP initiators. A kinetics study indicated that the chain growth from the films was in agreement with a controlled process. The dormant chain ends of the grafted polymer on the PI films could reinitiate the consecutive surface-initiated ATRP to prepare surface-functionalized diblock copolymer brushes on the PI films. The modified surface was characterized by X-ray photoelectron spectroscopy (XPS) after each modification stage. Protein adsorption experiments indicated that the PI-P(PEGMA) membrane exhibited substantially improved anti-fouling properties compared to the pristine PI surface.     

Synthesis and characterization of tapered copolymer brushes via surface-initiated atom transfer radical copolymerization

Tapered copolymer brushes of methyl methacrylate (MMA) and 2-hydroxyethyl methacrylate (HEMA) were synthesized via surface-initiated atom transfer radical polymerization (ATRP) by gradual addition of HEMA to a reaction mixture that originally only had MMA as monomer. The copolymer brush grew linearly with polymerization time. The tapered copolymer brushes responded to selective solvent treatments. For the same tapered copolymer brush, pretreating the surface with methylene chloride made the surface more hydrophobic; pretreating the surface with methanol increased the surface hydrophilicity. This change in surface properties was reversible and considered to be caused by the solvent induced rearrangement of the polymer brushes, which is supported by atomic force microscopy images of the surface. Our work demonstrates that the properties of the tapered copolymer brush could be finely tuned by careful control of the composition profile.     

HYDROPHILIC MODIFICATION OF PPESK POROUS MEMBRANES VIA AQUEOUS SURFACE-INITIATED ATOM TRANSFER RADICAL POLYMERIZATION

Hydrophilic surface modification of poly(phthalazinone ether sulfone ketone)(PPESK) porous membranes was achieved via surface-initiated atom transfer radical polymerization(ATRP) in aqueous medium.Prior to ATRP.chloromethyl groups were introduced onto PPESK main chains by chloromethylation.Chloromethvlated PPESK(CMPPESK) was fabricated into porous membrane through phase inversion technique.Hydrophilic poly(poly(ethylene glycol) methyl ether methacrylate)(P(PEGMA)) brushes were grafted from CMPPESK membra...     

Controlled grafting of well-defined epoxide polymers on hydrogen-terminated silicon substrates by surface-initiated ATRP at ambient temperature

Controlled grafting of well-defined epoxide polymer brushes on the hydrogen-terminated Si(100) substrates (Si-H substrates) was carried out via the surface-initiated atom-transfer radical polymerization (ATRP) at room temperature. Thus, glycidyl methacrylate (GMA) polymer brushes were prepared by ATRP from the alpha-bromoester functionalized Si-H surface. Kinetic studies revealed a linear increase in GMA polymer (PGMA) film thickness with reaction time, indicating that chain growth from the surface was a controlled "living" process. The graft polymerization proceeded more rapidly in the dimethylformamide/water (DMF/H(2)O) mixed solvent medium than in DMF, leading to much thicker PGMA growth on the silicon surface in the former medium. The chemical composition of the GMA graft-polymerized silicon (Si-g-PGMA) surfaces were characterized by X-ray photoelectron spectroscopy (XPS). The fact that the epoxide functional groups of the grafted PGMA were preserved quantitatively was revealed in the reaction with ethylenediamine. The "living" character of the PGMA chain end was further ascertained by the subsequent growth of a poly(pentafluorostyrene) (PFS) block from the Si-g-PGMA surface, using the PGMA brushes as the macroinitiators.     

用ATRP法构筑核壳型梯度极性的多羟基多臂星状超支化聚合物及聚合物刷——三层聚合物刷的合成与表征

设计并通过原子转移自由基聚合方法 (ATRP)合成了核壳型具有梯度极性的多羟基多臂星状聚合物刷 .端羟基超支化聚 (3 乙基 3 羟甲基氧杂环丁烷 )与 2 溴 异丁基酰溴反应制得大分子引发剂 (HP Br) ,以Cu(I)Br和N ,N ,N′ ,N′ ,N″ 五甲基二乙基三胺 (PMDETA)为催化体系 ,进行甲基丙烯酸甲酯 (MMA)的ATRP反应 ,得到以甲基丙烯酸甲酯为臂的多臂星状超支化聚合物 (HP g PMMA) .又以HP g PMMA为引发剂 ,进行甲基丙烯酸羟乙酯 (HEMA)的ATRP聚合 ,得到核壳型具有梯度极性的多羟基多臂星状超支化聚合物 (HP g PMMA b PHEMA) ,继续将其羟基官能团溴代化 (与 2 溴 异丁基酰溴反应 ) ,引发HEMA的ATRP溶液聚合 ,得到了多臂星状超支化聚合物刷 .产物的结构用1 H NMR、FTIR、GPC等进行了表征和测试 .     

Preparation of dual stimuli‐responsive PET track‐etched membrane by grafting copolymer using ATRP

A dual stimuli‐responsive (pH and thermo) polyethylene terephthalate (PET) track‐etched membrane has been prepared using atom transfer radical polymerization (ATRP). First, ATRP initiator 2‐bromoisobutyryl bromide was anchored onto the membrane surface. Then, 2‐hydroxyethyl‐methacrylate (HEMA) and N‐isopropylacrylamide (NIPAAm) were grafted onto the membrane surface using ATRP. X‐ray photoelectron spectroscopy, ATR‐Fourier transform infrared spectroscopy, scanning electron microscopy and thermogravimetric analysis were used to characterize the membrane structure and thermal properties; water flux measurement was used to investigate the double stimuli‐responsive property of the obtained membrane. The results indicate that the PHEMA and PNIPAAm binary grafted PET track‐etched membrane has double environmental responsiveness. This method provides a potential modification method for preparing functional membranes. Copyright © 2012 John Wiley & Sons, Ltd.     

表面引发的原子转移自由基聚合法在聚偏二氟乙烯表面制备可控的聚甲基丙烯酸甲酯刷

采用表面引发的原子转移自由基聚合法(ATRP)在聚偏二氟乙烯(PVDF)表面制备结构可控的聚甲基丙烯酸甲酯刷。通过碱处理和紫外光照溴代的方法,将ATRP引入到PVDF表面; 然后采用ATRP法将甲基丙烯酸甲酯接枝到溴代的PVDF表面。采用傅里叶变换红外光谱和X-射线光电子能谱对改性前后PVDF表面的结构进行了表征。结果表明甲基丙烯酸甲酯成功地接枝到了PVDF表面。     

Synthesis of well‐defined polymer brushes on the surface of zinc antimonate nanoparticles through surface‐initiated atom transfer radical polymerization

Zinc antimonate nanoparticles consisting of antimony and zinc oxide were surface modified in a methanol solvent medium using triethoxysilane‐based atom transfer radical polymerization (ATRP) initiating group (i.e.,) 6‐(2‐bromo‐2‐methyl) propionyloxy hexyl triethoxysilane. Successful grafting of ATRP initiator on the surface of nanoparticles was confirmed by thermogravimetric analysis that shows a significant weight loss at around 250–410 °C. Grafting of ATRP initiator onto the surface was further corroborated using Fourier transform Infrared spectroscopy (FT‐IR) and X‐ray photoelectron spectroscopy (XPS). The surface‐initiated ATRP of methyl methacrylate (MMA) mediated by a copper complex was carried out with the initiator‐fixed zinc antimonate nanoparticles in the presence of a sacrificial (free) initiator. The polymerization was preceded in a living manner in all examined cases; producing nanoparticles coated with well defined poly(methyl methacrylate) (PMMA) brushes with molecular weight in the range of 35–48K. Furthermore, PMMA‐grafted zinc antimonate nanoparticles were characterized using Thermogravimetric analysis (TGA) that exhibit significant weight loss in the temperature range of 300–410 °C confirming the formation of polymer brushes on the surface with the graft density as high as 0.26–0.27 chains/nm². The improvement in the dispersibility of PMMA‐grafted zinc antimonate nanoparticles was verified using ultraviolet‐visible spectroscopy and transmission electron microscopy. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

A FACILE APPROAC0H FOR THE SURFACE MODIFICATION OF POLY(VINYLIDENE FLUORIDE)MEMBRANE VIA SURFACE-INITIATED ATOM TRANSFER RADICAL POLYMERIZATION

A novel approach for the surface modification of poly(vinylidene fluoride)(PVDF)membrane was successfully realized through alkaline treatment,UV-induced bromine addition,and followed by surface-initiated atom transfer radical polymerization(ATRP)of methyl methacrylate(MMA).Chemical changes on the PVDF membrane before and after modification were analyzed with attenuated total reflectance Fourier transform infrared spectroscopy(AIR/Fr-IR)and X-ray photoelectron spectroscopy(XPS).Primary kinetic study revealed that the chain growth of poly(methyl methacrylate)(PMMA)from the PVDF surface is consistent with a"controlled"process.     

A FACILE APPROACH FOR THE SURFACE MODIFICATION OF POLY(VINYLIDENE FLUORIDE) MEMBRANE VIA SURFACE-INITIATED ATOM TRANSFER RADICAL POLYMERIZATION

A novel approach for the surface modification of poly(vinylidene fluoride)(PVDF)membrane was successfully realized through alkaline treatment,UV-induced bromine addition,and followed by surface-initiated atom transfer radical polymerization(ATRP)of methyl methacrylate(MMA).Chemical changes on the PVDF membrane before and after modification were analyzed with attenuated total reflectance Fourier transform infrared spectroscopy(ATR/FT-IR)and X-ray photoelectron spectroscopy(XPS).Primary kinetic study revea...     

Controlled grafting of comb copolymer brushes on poly(tetrafluoroethylene) films by surface-initiated living radical polymerizations

Surface modification of poly(tetrafluoroethylene) (PTFE) films by well-defined comb copolymer brushes was carried out. Peroxide initiators were generated directly on the PTFE film surface via radio frequency Ar plasma pretreatment, followed by air exposure. Poly(glycidyl methacrylate) (PGMA) brushes were first prepared by surface-initiated reversible addition-fragmentation chain transfer polymerization from the peroxide initiators on the PTFE surface in the presence of a chain transfer agent. Kinetics study revealed a linear increase in the graft concentration of PGMA with the reaction time, indicating that the chain growth from the surface was consistent with a "controlled" or "living" process. alpha-Bromoester moieties were attached to the grafted PGMA by reaction of the epoxide groups with 2-bromo-2-methylpropionic acid. The comb copolymer brushes were subsequently prepared via surface-initiated atom transfer radical polymerization of two hydrophilic vinyl monomers, including poly(ethylene glycol) methyl ether methacrylate and sodium salt of 4-styrenesulfonic acid. The chemical composition of the modified PTFE surfaces was characterized by X-ray photoelectron spectroscopy.     

Novel sequence for generating glycopolymer tethered on a membrane surface

Cell surface carbohydrates, usually binding with other biomacromolecules (such as lipids and proteins), are involved in numerous biological functions, including cellular recognition, adhesion, cell growth regulation, and inflammation. Synthetic carbohydrate-based polymers, so-called glycopolymers, are emerging as important well-defined tools for investigating carbohydrate-based biological processes and for simulating various functions of carbohydrates. In this study, a novel two-step sequence for the generation of a glycopolymer layer tethered on a polypropylene microporous membrane is described. First, a UV-induced graft polymerization of 2-aminoethyl methacrylate hydrochloride (AEMA) was carried out on the membrane to generate an amino-functionalized surface, and the effects of polymerization factors (monomer/initiator concentration and UV irradiation time) on the grafting density were studied. Second, sugar moieties were bound with the grafted functional layer to form glycopolymer by the reaction between the amino groups on the membrane surface and carbohydrate lactones. Chemical analysis by Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy combined with surface morphology observation by scanning electron microscopy confirmed the graft polymerization of AEMA and the formation of glycopolymer. The decreases of water contact angle and protein adsorption on the membrane revealed the enhancement of hydrophilicity and protein resistance due to the typical characteristics of the glycopolymer tethered on the surface. These results indicated that the novel sequence reported in this work is a facile process to form glycopolymer-modified surfaces.     

Tethering hydrophilic polymer brushes onto PPESK membranes via surface-initiated atom transfer radical polymerization

Surface-initiated atom transfer radical polymerization (ATRP) was used to graft hydrophilic comb-like poly((poly(ethylene glycol) methyl ether methacrylate), or P(PEGMA), brushes from chloromethylated poly(phthalazinone ether sulfone ketone) (CMPPESK) membrane surfaces. Prior to ATRP, chloromethylation of PPESK was beforehand performed and the obtained CMPPESK was prepared into porous membranes by phase inversion process. It was demonstrated that the benzyl chloride groups on the CMPPESK membrane surface afforded effective macroinitiators to graft the well-defined polymer brushes. Attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy and X-ray photoelectron spectroscopy (XPS) confirmed the grafting of P(PEGMA) chains. Water contact angle measurements indicated that the introduction of P(PEGMA) graft chains promoted remarkably the surface hydrophilicity of PPESK membranes. The effects of P(PEGMA) immobilization on membrane morphology, permeability and fouling resistance were investigated. It was found that the comb-like P(PEGMA) grafts brought smaller pore diameters and higher solute rejections to PPESK membranes. The results of dynamic anti-fouling experiments showed the anti-fouling ability of the membranes was significantly improved after the grafting of P(PEGMA) brushes.     

Covalent immobilization of antibody fragments on well-defined polymer brushes via site-directed method

Well-defined polymer brushes and block copolymer brushes consisting of 2-methacryloyloxyethyl phosphorylcholine (MPC) and glycidyl methacrylate (GMA) were prepared by surface-initiated atom transfer radical polymerization (ATRP). The polymer brushes were used for the immobilization of antibody fragments in a defined orientation. Pyridyl disulfide moieties were introduced to the polymer brushes via a reaction of epoxy groups in GMA units. Fab’ fragments were then immobilized onto these surfaces via a thiol-disulfide interchange reaction and the reactivity of antibodies with antigens was investigated. Antigen/antibody binding on the polymer brushes was more preferable than that on epoxysilane films as a control surface. Furthermore, the activity of the antibodies immobilized on the block copolymer brushes having biocompatible PMPC was greater than that on other surfaces that did not have PMPC in their structures.     

用ATRP法构筑核壳型梯度极性的多羟基多臂星状超支化聚合物及聚合物刷——双层聚合物刷的合成与表征

设计并通过原子转移自由基聚合方法 (ATRP)合成了核壳型多羟基多臂星状超支化聚合物刷 .以 2 溴异丁基酰溴封端的超支化聚 (3 乙基 3 羟甲基氧杂环丁烷 ) (HP Br)作为大分子引发剂 ,采用Cu(I)Br和N ,N ,N′ ,N′ ,N″ 五甲基二乙基三胺 (PMDETA)催化体系 ,在丁酮与丙醇的混和溶液中 ,通过甲基丙烯酸羟乙酯(HEMA)的ATRP溶液聚合 ,得到了一系列含有大量羟基的多臂星状超支化聚合物刷 (HP g PHEMA) ,并考察了其羟基的活性 ,发现羟基还可以与苯甲酰氯发生反应 .产物的结构和热性能用1 H NMR、FTIR、GPC、TGA、DSC等进行了表征和测试 .     

Functionalization of three‐dimensionally ordered macroporous cross‐linked polystyrene by atom‐transfer radical polymerization of hydroxyethyl methacrylate and subsequent derivatization

The surface‐initiated atom‐transfer radical polymerization (ATRP) technique was applied to the graft polymerization of 2‐hydroxyethyl methacrylate (HEMA) from three‐dimensionally ordered macroporous crosslinked polystyrene (3DOM CLPS) on which the initiator (benzyl chloride) was immobilized onto the pore wall of 3DOM CLPS by chloromethylation of benzene ring. By the adjustment of the monomer concentration or graft polymerization time, the thickness of grafted polymer layers can be controlled. FTIR analysis confirms that the graft polymerization of HEMA via ATRP had been taken place at the pore wall of 3DOM CLPS. SEM images of PHEMA‐grafted 3DOM CLPS show that the ordered structure is well preserved after graft polymerization and the grafted layers are dense and homogeneous. The maximum thickness of grafted layer is up to 35 nm and the corresponding percent weight increase is 102.8% in this study. Moreover, the PHEMA layers were further functionalized in high yield via their reactive hydroxyl groups under gentle condition. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7950–7959, 2008     

Thermosensitive hairy hybrid nanoparticles synthesized by surface-initiated atom transfer radical polymerization

This article reports on the synthesis of thermosensitive polymer brushes on silica nanoparticles by atom transfer radical polymerization (ATRP) and the study of thermo-induced phase transitions in water. Silica nanoparticles were prepared by the St?ber process and the surface was functionalized by an ATRP initiator. Surface-initiated ATRPs of methoxydi(ethylene glycol) methacrylate (DEGMMA) and methoxytri(ethylene glycol) methacrylate (TEGMMA) were carried out in THF at 40 degrees C in the presence of a free initiator, benzyl 2-bromoisobutyrate. The polymerizations were monitored by 1H NMR spectroscopy and gel permeation chromatography. The hairy hybrid nanoparticles were characterized by thermogravimetric analysis and scanning electron microscopy, and the thermoresponsive properties were investigated by variable temperature 1H NMR spectroscopy and dynamic light scattering. The cloud points of free poly(DEGMMA) and poly(TEGMMA) in water were around 25 and 48 degrees C, respectively. The thermo-induced phase transitions of polymer brushes on silica nanoparticles began at a lower temperature and continued over a broader range (4-10 degrees C) than those of free polymers in water (< 2 degrees C).     

Branched fluoropolymer-Si hybrids via surface-initiated ATRP of pentafluorostyrene on hydrogen-terminated Si(100) surfaces

Linear, branched, and arborescent fluoropolymer-Si hybrids were prepared via surface-initiated atom transfer radical polymerization (ATRP) from the 4-vinylbenzyl chloride (VBC) inimer and ClSO(3)H-modified VBC that were immobilized on hydrogen-terminated Si(100), or Si-H, surfaces. The simple approach of UV-induced coupling of VBC with the Si-H surface provided a stable, Si-C bonded monolayer of "monofunctional" ATRP initiators (the Si-VBC surface). The aromatic rings of the Si-VBC surface were then sulfonated by ClSO(3)H to introduce sulfonyl chloride (-SO(2)Cl) groups and to give rise to a monolayer of "bifunctional" ATRP initiators. Kinetics study indicated that the chain growth of poly(pentafluorostyrene) from the functionalized silicon surfaces was consistent with a "controlled" or "living" process. The chemical composition and functionality of the silicon surface were tailored by the well-defined linear and branched fluoropolymer brushes. Atomic force microscopy images revealed that the surface-initiated ATRP of pentafluorostyrene (PFS) had proceeded uniformly on the Si-VBC surface to give rise to a dense and molecularly flat surface coverage of the linear brushes. The uniformity of surfaces with branched brushes was controlled by varying the feed ratio of the monomer and inimer (VBC in the present case). The living chain ends on the functionalized silicon surfaces were used as the macroinitiators for the synthesis of diblock copolymer brushes, consisting of the PFS and methyl methacrylate polymer blocks.