Microperoxidase-11/NH2-FSM16 as a H2O2-resistant heterogeneous nanobiocatalyst: a suicide-inactivation study

The catalytic activity of heme peptides is an area of intense investigation. They are utilized for exploring the fine details of structural and functional properties of an active site, and to create minimized and industrial catalysts. The peroxidase activity and kinetics of suicide-inactivation of microperoxidase-11/FSM16 as a heterogeneous nanobiocatalyst in oxidation reaction of guaiacol were studied in the presence of high concentration of hydrogen peroxide (2?mM), as its natural suicide-substrate. The substrate concentration was first-order in relation to aromatic substrate (AH), and the ratio of suicide-substrate (H₂O₂) was kept much higher than the benign substrate (guaiacol). The results of kinetic analysis confirmed a similar mechanism for suicide-peroxide inactivation of horseradish peroxidase (HRP), microperoxidase (MP-11) and MP-11/NH₂-FSM16. Inactivation kinetic parameters, including intact activity of MP-11/NH₂-FSM16, ??_i, and the apparent inactivation rate constant (k _i) were obtained as 0.229?±?0.009?min^?1 and 0.651?±?0.041?min^?1 at [H₂O₂]?=?2.0?mM, respectively, in 5.0?mM phosphate buffer solution (PBS; pH 7.0) at 27?°C. Our results indicated that covalent immobilization of microperoxidase onto NH₂-FSM16 protected the heme group against peroxide inactivation resulting in generation of an efficient peroxide-resistant heterogeneous nanobiocatalyst.     

Revisiting Alkane Hydroxylation with m-CPBA (m-Chloroperbenzoic Acid) Catalyzed by Nickel(II) Complexes

Mechanistic studies are performed on the alkane hydroxylation with m-CPBA (m-chloroperbenzoic acid) catalyzed by nickel(II) complexes, Ni^II(L). In the oxidation of cycloalkanes, Ni^II(TPA) acts as an efficient catalyst with a high yield and a high alcohol selectivity. In the oxidation of adamantane, the tertiary carbon is predominantly oxidized. The reaction rate shows first-order dependence on [substrate] and [Ni^II(L)] but is independent on [m-CPBA]; v_obs=k₂[substrate][Ni^II(L)]. The reaction exhibited a relatively large kinetic deuterium isotope effect (KIE) of 6.7, demonstrating that the hydrogen atom abstraction is involved in the rate-limiting step of the catalytic cycle. Furthermore, Ni^II(L) supported by related tetradentate ligands exhibit apparently different catalytic activity, suggesting contribution of the Ni^II(L) in the catalytic cycle. Based on the kinetic analysis and the significant effects of O₂ and CCl₄ on the product distribution pattern, possible contributions of (L)Ni^II−O^. and the aroyloxyl radical as the reactive oxidants are discussed.     

Bioelectrochemical Characterization of Horseradish and Soybean Peroxidases

Heme peroxidase are ubiquitous enzymes catalyzing the oxidation of a broad range of substrates by hydrogen peroxide. In this paper the bioelectrochemical characterization of horseradish peroxidase (HRP) and soybean peroxidase (SBP), belonging to class III of the plant peroxidase superfamily, was studied. The homogeneous reactions between peroxidases and some common redox mediators in the presence of hydrogen peroxide have been carried out by cyclic voltammetry. The electrochemical characterization of the reactions involving enzyme, substrate and mediators concentrations allowed us to calculate the kinetic parameters for the substrate–enzyme reaction (K_MS) and for the redox mediator–enzyme reaction (K_MM). A full characterization of the direct electron transfer kinetic parameters between the electrode and enzyme active site was also performed by opportunely modeling data obtained from cyclic voltammetry and square wave voltammetry experiments. The experimental data obtained with immobilized peroxidases show enhanced direct electron transfer and excellent electrocatalytical performance for H₂O₂. Despite the structural similarities and common catalytic cycle, HRP and SBP exhibit differences in their substrate affinity and catalytic efficiency. Basing on our results, it can be concluded that peroxidase from soybean represents an interesting alternative to the classical and largely employed one obtained from horseradish as biorecognition element of electrochemical mediated biosensors.     

Flowerlike hybrid horseradish peroxidase nanobiocatalyst for the polymerization of guaiacol

In this study, the catalytic activity and stability of flowerlike hybrid horseradish peroxidase (HRP) nanobiocatalyst (HRP-Cu ²⁺ ) obtained from Cu ²⁺ ions and HRP enzyme in the polymerization reaction of guaiacol were analyzed. We demonstrated that HRP-Cu ²⁺ and hydrogen peroxide (H ₂ O ₂ ) initiator showed significantly increased catalytic activity and stability on the polymerization of guaiacol compared to that of free HRP enzyme. Poly(guaiacol) was observed with quite high yields (88%) and molecular weights (38,000 g/mol) under pH 7.4 phosphate-buffered saline (PBS) conditions at 60 °C with 5 weight% of HRP-Cu ²⁺ loading. HRP-Cu ²⁺ also shows very high thermal stability and works even at 70 °C reaction temperature; free HRP enzyme denatures at that temperature. Furthermore, HRP-Cu ²⁺ provided considerable repeated use and showed some degree of catalytic activity, even after the fourth recycle, in the polymerization of guaiacol.     

HYDROLYSIS OF p-NTTROPHENYL PICOLINATE CATALYZED BY ZINC(H) OR NICKEL (II) COMPLEXES OF LONG ALKYL-PYRIDINES WITH HYDROXYL GROUPS IN MICELLAR SOLUTION

The ternary complex kinetic model for metallomicellar catalysis was employed to investigate the effect of Zn²⁺ ion or Ni²⁺ion complexes of long alkyl-pyridines with hydroxyl groups in micellar solution on the hydrolysis of p-nitrophenyl picolinate in this paper. The kinetic and the thermodynamic parameters (K _N, K _r, K _M) were obtained. More worthily, the effect of pH on the hydrolysis of p-nitrophenyl picolinate in metallomicellar phase was discussed quantitatively. The rate constant (K _N) of the hydrolysis of p-nitrophenyl picolinate in metallomicellar phase was obtained and compared with Cu²⁺ ion complex system. The results indicated that Cu²⁺ ion micelle, Ni²⁺ ion micelle and Zn²⁺ ion micelle all exhibited great catalytic effects on the hydrolysis of p-nitrophenyl picolinate. and the order of activity is:Cu²⁺ ion micelle ≥ Ni²⁺ ion micelle ≥ Zn²⁺ ion micell. Moreover, the reasonability of the ternary complex kinetic model was verified further.     

Anodically electrodeposited Co+Ni mixed oxide electrode: preparation and electrocatalytic activity for oxygen evolution in alkaline media

Co+Ni mixed oxides on Ni substrate were prepared through anodic electrodeposition from Co(NO₃)₂ and Ni(NO₃)₂ aqueous solutions with five different Co²⁺/Ni²⁺ ratios beside only Co²⁺. By the electrochemical measurements, the optimum performance in electrocatalytic activity for oxygen evolution reaction in alkaline media was obtained on the Co+Ni mixed oxide deposited from the solution containing Co²⁺/Ni²⁺ ratio of 1:1. The mixed oxide is corresponding to about 68 at% Co contents with spinel-type NiCo₂O₄ phase and porosity surface structure. The electrochemical kinetic parameters including exchange current density, Tafel slopes, reaction order with respect to [OH⁻] and standard electrochemical enthalpy of activation were analyzed also. A possible mechanism involving the formation of a physisorbed hydrogen peroxide intermediate in a slow electrochemical step was presented, which accounts for the values of the experimental results.     

Determination of pKa value, kinetic studies of decomposition and oxygen transfer for chromium(VI) peroxide

The determination of pK_a value for the unstable chromium(VI) peroxide, CrO(O₂)₂(H₂O) in aqueous solution is presented. The pK_a value is found to be (1.55 ± 0.03). The kinetic decomposition of chromium(VI) peroxide is dependent on the concentration of hydrogen peroxide in the pH range between 2.5 and 4.0. We have proposed the possible explanation for the formation of triperoxo chromium complex of hydrogen peroxide which is dependent on decomposition. Activation of coordinate peroxide in chromium(VI) peroxide observed in the kinetic studies is by reduction of thiolato-cobalt(III) complex. The rate constant (M⁻¹ s⁻¹, 15 °C) for the oxygen atom transfer reaction from CrO(O₂)₂(OH)⁻ to (en)₂Co(SCH₂CH₂NH₂)²⁺ is found to be (25.0 ± 1.3).     

基于TiO2的绿色多相催化剂催化CO2与环氧化合物偶联反应

金属离子掺杂纳米TiO2(M-TiO2,M=Zn2+,Cu2+,Co2+,Mn2+,Ni2+)在CO2与环氧化合物的偶联反应中表现出较高的催化活性.反应以四正丁基碘化铵(TBAI)为共催化剂,在无溶剂条件下进行.考察了反应温度、反应时间和CO2压力在Zn-TiO2/TBAI体系中对反应性能的影响.作为无毒的多相催化剂,Zn-TiO2可循环使用5次,其催化活性没有明显降低.     

Mn(II)-sodium dodecyl sulphate complex mimic enzyme-catalyzed fluorescence quenching of Pyronine B by hydrogen peroxide

Mn(II)-sodium dodecyl sulphate complex (Mn(II)-SDS) is used to mimic the active group of peroxidase. The catalytic characteristic of this mimic enzyme catalyst in the oxidation reaction of fluorescence substrate, tetraethyldiaminoxanthyl chloride (Pyronine B (PB)), with hydrogen peroxide has been studied. The experimental results show that Mn(II)-SDS complex has similar catalytic activity that of peroxidase. The steady-state catalytic rate depends upon mimic enzyme and substrate concentrations, and the Michaelis-Menten parameters K_m, V_max and K_cat are 7.6×10⁻⁶ M, 7.9×10⁻⁷ M s⁻¹ and 7.9 s⁻¹, respectively. The catalytic activity of Mn(II)-SDS complex is compared with those of HRP and Hemin. Though the catalytic activity of Mn(II)-SDS complex is 15.9% of that of HRP, it can catalyze the oxidation reaction of PB with hydrogen peroxide lead to fluorescence quenching of PB. Under optimum conditions, linear relationship between fluorescence quenching F₀/F and concentration of H₂O₂ is in the range of (0.0-3.6) × 10⁻⁷ M. The detection limit is determined to be 3.0×10⁻⁹ M. By coupling this mimic catalytic reaction with the catalytic reaction of glucose oxidase (GOD), glucose can be detected. Linear relationship between F₀/F and concentration of glucose is in the range of (0.0-1.4) × 10⁻⁷ M. The detection limit is determined to be 4.2×10⁻⁹ M. This method is applied to the determination of glucose in human serum and the results are in good agreement with the phenol-4-aminoantipyrine (4-AAP).     

Kinetics of oxidation of o-dianisidine by hydrogen peroxide in the presence of antibody complexes of iron(III) coproporphyrin

The complex of iron(III) coproporphyrinl (FeCPI) with antibody D5E3 was studied as an artificial peroxidase, usingo-dianisidine as a substrate. At saturation with respect to antibody, the initial rates ofo-dianisidine oxidation are practically the same for free and bound FeCPI at a concentration 5 × 10^-9M, but the catalytic rate constant (k_c) for bound FeCPI exceed (k_c) for free FeCPI by two-to threefold. This difference can be explained by a real enhancement of (k_c) at the antibody-active site. The dependence of initial rates of the reaction on substrate concentrations obeyed Michaelis-Menten kinetics and revealed substrate activation at high concentrations ofo-dianisidine. A comparison of the Stern-Volmer constants foro-dianisidineinduced quenching of the porphyrin fluorescence proves that antibody-bound coproporphyrin is equivalently accessible to the substrate as protoporphyrin bound to apoperoxidase from horseradish peroxidase (HRP). Based on analysis of the (k_c) dependence on H₂O₂ concentrations in the FeCPI-antibody system, we suggest that interaction with hydrogen peroxide is the rate-limiting step for the oxidation reaction.     

The role of Li2MO2 structures (M=metal ion) in the electrochemistry of (x)LiMn0.5Ni0.5O2·(1−x)Li2TiO3 electrodes for lithium-ion batteries

The electrochemical reactions of lithium with layered composite electrodes (x)LiMn_0.5Ni_0.5O₂·(1−x)Li₂TiO₃ were investigated at low voltages. The metal oxide 0.95LiMn_0.5Ni_0.5O₂·0.05Li₂TiO₃ (x=0.95) which can also be represented in layered notation as Li(Mn_0.46Ni_0.46Ti_0.05Li_0.02)O₂, can react with one equivalent of lithium during an initial discharge from 3.2 to 1.4 V vs. Li⁰. The electrochemical reaction, which corresponds to a theoretical capacity of 286 mAh/g, is hypothesized to form Li₂(Mn_0.46Ni_0.46Ti_0.05Li_0.02)O₂ that is isostructural with Li₂MnO₂ and Li₂NiO₂. Similar low-voltage electrochemical behavior is also observed with unsubstituted, standard LiMn_0.5Ni_0.5O₂ electrodes (x=1). In situ X-ray absorption spectroscopy (XAS) data of Li(Mn_0.46Ni_0.46Ti_0.05Li_0.02)O₂ electrodes indicate that the low-voltage (<1.8 V) reaction is associated primarily with the reduction of Mn⁴⁺ to Mn²⁺. Symmetric rocking-chair cells with the configuration Li(Mn_0.46Ni_0.46Ti_0.05Li_0.02)O₂/Li(Mn_0.46Ni_0.46Ti_0.05Li_0.02)O₂ were tested. These electrodes provide a rechargeable capacity in excess of 300 mAh/g when charged and discharged over a 3.3 to −3.3 V range and show an insignificant capacity loss on the initial cycle. These findings have implications for combating the capacity-loss effects at graphite, metal–alloy, or intermetallic negative electrodes against lithium metal-oxide positive electrodes of conventional lithium-ion cells.     

Schiff碱配合物的研究——Ⅸ.表面Schiff碱配合物对H2O2分解的催化作用

制备了两种表面Schiff碱及其Cu²⁺、Co²⁺、Ni²⁺、Zn²⁺配合物,考察了它们对H₂O₂分解的催化性能,其活性顺序为:Co²⁺>Cu²⁺>Ni²⁺>Zn²⁺,且与金属离子氧化还原电位有关。溶液的pH值增加有利于催化反应,有机配体的加入则对反应有所抑制。     

Advanced oxidation processes for decolorization of aqueous solution containing acid red G azo dye

Some investigations concerning the decolorization of Acid Red G azo dye by photooxidation with hydrogen peroxide were performed. The influences of pH, oxidant concentration, and the presence of Fe²⁺ or other metal ions (Co²⁺, Cu²⁺, Ni²⁺, Mn²⁺) as potential catalysts, were investigated. The best results were obtained in the presence of ferrous ions in acid and neutral media. The other ions are not as effective as Fe²⁺ for dye decolorization. Co²⁺ and Cu²⁺ ions have a catalytic action, at low concentration, within a wide range of pH. Ni²⁺ and Mn²⁺ ions have no catalytic effect in photooxidation with hydrogen peroxide at acid Ni²⁺ and Mn²⁺ ions have no catalytic effect in photooxidation with hydrogen peroxide at acid pH values, but show a weak action in alkaline media.     

Cytochrome c embraced in sodium dodecyl sulfate nano-micelle as a homogeneous nanostructured peroxidase

A homogeneous nanostructured enzyme (artificial peroxidase, AP) with suitable catalytic efficiency was generated using bovine heart cytochrome c (Cyt c) and sodium dodecyl sulfate nano-micelles in 50?mM phosphate buffer pH 10.5 at 25?°C. The Michaelis?CMenten (K _m) and catalytic rate (k _cat) of the AP were determined to be 21.6?±?1.2???M and 0.474?±?0.013?s^?1, respectively. The catalytic efficiency of the AP was 0.0219?±?0.002???M^?1s^?1, which was 30?±?1.5?% as efficient as the native horseradish peroxidase (HRP). The mean diameter of AP was measured to be 6.4?nm using dynamic light scattering technique. The UV?CVis spectrometry, circular dichroism, surface tension, isothermal titration calorimetric and electrochemistry methods were utilized for additional characterization of the AP. Together our results suggest that the AP generated here can be used in place of HRP in industrial and commercial fields under some extreme conditions.     

Kinetic Modelling of Thermal Inactivation of a Keratinase from Purpureocillium lilacinum LPSC # 876 and the Influence of Some additives on Its Thermal Stability

Thermal inactivation of a keratinase produced by Purpureocillium lilacinum LPSC #876 was kinetically investigated using several enzyme inactivation models at the temperature range of 50–65 °C. Among the models studied, the Weibull distribution was the best model that describes the residual activity of P. lilacinum keratinase after heat treatment over the selected temperatures. The stabilising effect of metal ions (Ca²⁺ or Mg²⁺, 5 mmol l^?1) or polyols (propylene glycol and glycerol, 10 % v/v) was investigated, showing that the presence of Ca²⁺ increases the enzyme stability significantly. Conforming to the increased Ca²⁺ concentration, thermal stability of the enzyme also increased, with 10 mM of Ca²⁺ being the concentration of metal in which the enzyme retained 100 % of its original activity after being incubated for 1 h at 55 °C. The effects of temperature on Weibull equation parameters and on the characteristics of the inactivation curves were evaluated. In the absence of any additives (control), the reliable time (t _R) of the keratinase, analogous to D value, ranged from 484.16 to 63.67 min, while in the presence of Ca²⁺ the t _R values ranged from 6,221 to 414.95 min at 50–65 °C. P. lilacinum keratinase is a potentially useful biocatalyst, and therefore, kinetic modelling of thermal inactivation addresses an important topic for its application in various industrial processes.     

Author index for volume 31

The solid state reactions of MMoO₄ (M = Mg²⁺, Fe²⁺, and Ni²⁺) and orthorhombic TeO₂ were investigated. A new metal telluromolybdate MgTeMoO₆ was obtained in the case of Mg; its structure belongs to the orthorhombic system with unit-cell dimensions a = 5.262Å, b = 5.028 Å, c = 8.880 Å. Fe₂(MoO₄)₃ and a new compound were formed in the case of Fe. The new compound is made up with Fe³⁺ ions and its chemical formula cannot be recognized as FeTeMoO₆. In the case of Ni a complex reaction mixture is obtained. An explanation is given of the ability of M²⁺ ions to form the metal telluromolybdates. The catalytic properties of MgTeMoO₆ are discussed and compared to those of the other metal telluromolybdates.     

Removal of divalent nickel cations from aqueous solution by multi-walled carbon nano tubes: equilibrium and kinetic processes

Release of heavy metals into water as a result of industrial activity may pose a serious threat to the environment. In this study, the potential of multi-walled carbon nano tubes (MWCNT) to remove Ni²⁺ cations from aqueous solutions was investigated in a batch reactor under different experimental conditions. The effects on the removal process of conditions such as initial concentration of Ni²⁺ ions, temperature, and adsorbent mass were investigated. Nickel uptake was quantitatively evaluated by use of the Langmuir, Freundlich, and Dubinin?CKaganer?CRadushkevich isotherm models. For 20?mg/L initial Ni²⁺ cation concentration, adsorption capacity increased from 8.12 to 11.75?mg/g when the temperature was increased from 25 to 65?°C, an indication of the endothermic nature of adsorption process. In addition, the adsorption equilibrium was well described by the Langmuir isotherm model; maximum adsorption capacity was 17.86?mg/g Ni²⁺ cations on HNO₃-treated MWCNT (t-MWCNT). The results obtained in this study show that adsorption of Ni²⁺ on t-MWCNT is a spontaneous and endothermic process. By use of second-order kinetic constants and the Arrhenius equation, the activation energy of adsorption (E _a) was determined as 5.56?kJ?mol^?1.     

Die durch Blei(II) und Kupfer(II) katalysierte Zersetzung von Wasserstoffperoxid als Endpunktindikation chelatometrischer Titrationen

Zusammenfassung Die Anwendung der durch Blei(II) und Kupfer(II) katalysierten Zersetzung von Wasserstoffperoxid als exotherme Indikatorreaktion bei katalytisch-thermometrischer Endpunktindikation chelatometrischer Bestimmungen wird gezeigt. Die katalytische Wirkung von Blei(II) wird in ammoniak-ammoniumtartrathaltiger Lösung (p_H 12) und die Wirkung von Kupfer(II) in ammoniumcarbonathaltigem (p_H 8,8), natriumhydroxid-natriumcarbonathaltigem (p_H 10) und in ammoniakalischem Medium herangezogen. Die direkte Titration von ÄDTA, DCTA und NTA mit Kupfer(II) und Blei(II), die inverse Titration dieser Metalle, wie auch die Bestimmung einiger Metallionen (Zn²⁺, Cd²⁺, Cu²⁺, Ni²⁺, Pb²⁺, Bi³⁺, In³⁺, Th⁴⁺) durch Rücktitration wird beschrieben. Die genannten Ionen können im Milligramm- und Mikrogrammbereich mit befriedigender Genauigkeit bestimmt werden.

---

The end-point indication of chelatometric titrations by the decomposition of hydrogen peroxide catalyzed by lead(II) and copper(II)

Summary The application of the decomposition of hydrogen peroxide as exothermic indicator reaction catalyzed by lead(II) and copper(II), to catalytic thermometric endpoint detection of chelatometric titrations is described. The catalytic action of lead(II) is applied in ammonia-ammonium tartrate solution (p_H 12), the action of copper(II) in ammonium carbonate (p_H 8.8), sodium hydroxide-sodium carbonate (p_H 10) and in ammoniacal medium (p_H 12). The direct titration of EDTA, DCTA and NTA with copper(II) and lead(II), the invers titration of this metals, as well as the determination of several ions (Zn²⁺, Cd²⁺, Cu²⁺, Ni²⁺, Pb²⁺, Bi³⁺, In³⁺, Th⁴⁺) by backtitration has been developed. The ions mentioned can be determined in the milligram and in the microgram range with reasonable accuracy.

     

Catalytic behaviour of a Cu(II) complex sorbed on zirconium molybdate in the decomposition of hydrogen peroxide

Summary Zirconium molybdate has been used as a support on which [Cu(NH₃)₄]²⁺ has been sorbed. Its catalytic activity has been studied through hydrogen peroxide decomposition at different temperatures, using different concentrations of hydrogen peroxide and different amounts of catalyst. A probable mechanism is suggested based on kinetic data.     

Synthesis,crystal structures and phosphodiesterase activities of alkoxide-bridged asymmetric dinuclear nickel(II) complexes

An asymmetric dinuclear ligand, N-4-methyl-homopiperazine-N′-[N-(2-pyridylmethyl)-N-2-(2-pyridylethyl)amine]-1,3-diaminopr-opan-2-ol (HL) and two dinuclear Ni(II) complexes [Ni₂L(DNBA)₂]ClO₄ (1) and [Ni₂L(BPP)₂]ClO₄·2H₂O (2) (3,5-dinitrobenzoic acid, bisphenyl phosphate) have been synthesized and characterized. Single crystal X-ray crystallographic analysis reveals that the coordination environments of the two Ni(II) atoms in complexes 1 and 2 are five and six coordinate, respectively. The phosphodiesterase activity of a di-Ni(II) complex Ni₂L formed in situ from a 2:1 mixture of Ni²⁺ and HL was investigated using bis(4-nitrophenyl) phosphate (BNPP) as the substrate. The pH dependence of the rate of BNPP cleavage in aqueous buffer indicates a bell-shaped profile with an optimum at about pH 8.4, which is parallel to the formation of the dinuclear species [Ni₂LOH]²⁺ according to UV–vis spectroscopy. At pH 8.4 and 25 °C, the k _cat (7.40 × 10^?5 s^?1) is ca.10⁶-fold higher than that of the uncatalyzed reaction. A possible mechanism for BNPP cleavage promoted by Ni₂L is proposed.