Synthesis and characterization of carboxymethyl cellulose-silver nanoparticle (AgNp)-silica hybrid for amylase immobilization

Carboxymethyl cellulose-silver nanoparticle (AgNp)-silica hybrids have been synthesized in a modified Stöber process. The hybrid synthesis was optimized to obtain an efficient immobilization matrix for diastase alpha amylase, a multimeric enzyme of high technological significance. The synthesized hybrids were characterized using FTIR, XRD, SEM, TGA and BET studies. The enzyme immobilization was done by adsorption and using the immobilized enzyme, the hydrolysis of soluble starch has been optimized in comparison to free enzyme. The optimum usable pH for the immobilized enzyme ranged from pH 4 to 5, while pH 5 was optimum pH for the free enzyme activity. The kinetic parameters for the immobilized, (K _M = 3.4610 mg ml^?1; V _max = 6.3540 mg ml^?1 min^?1) and free enzyme (K _M = 4.1664 mg ml^?1; V _max = 4.291 mg ml^?1 min^?1) hydrolysis indicated that the immobilization at the nanohybrid has significantly improved the catalytic property of the enzyme. In the immobilized state, the enzyme remained usable for many repeated cycles like our previous material, gum acacia-gelatin-AgNp-silica. Storage experiments indicated that the immobilization has increased the stability of the enzyme and also that AgNps play a role in stabilizing the immobilized enzyme.     

Gene Cloning, Expression, and Characterization of a Thermostable Xylanase from Nesterenkonia xinjiangensis CCTCC AA001025

An endo-β-1,4-xylanase-encoding gene, xyn11NX, was cloned from Nesterenkonia xinjiangensis CCTCC AA001025 and expressed in Escherichia coli. The gene encoded a 192-amino acid polypeptide and a putative 50-amino acid signal peptide. The deduced amino acid sequence exhibited a high degree of similarity with the xylanases from Streptomyces thermocyaneoviolaceus (68%) and Thermobifida fusca (66%) belonging to glycoside hydrolase family 11. After purification to homogeneity, the recombinant Xyn11NX exhibited optimal activity at pH 7.0 and 55 °C and remained stable at weakly acidic to alkaline pH (pH 5.0–11.0). The enzyme was thermostable, retaining more than 80% of the initial activity after incubation at 60 °C for 1 h and more than 40% of the activity at 90 °C for 15 min. The K _m and V _max values for oat spelt xylan and birchwood xylan were 16.08 mg ml^?1 and 45.66 μmol min^?1 mg^?1 and 9.22 mg ml^?1 and 16.05 μmol min^?1 mg^?1, respectively. The predominant hydrolysis products were xylobiose and xylotriose when using oat spelt xylan or birchwood xylan as substrate.     

Effects of Liquid Hot Water Pretreatment on Enzymatic Hydrolysis and Physicochemical Changes of Corncobs

Liquid hot water (LHW) pretreatment is an efficient chemical-free strategy for enhancing enzymatic digestibility of lignocellulosic biomass for conversion to fuels and chemicals in biorefinery. In this study, effects of LHW on removals of hemicelluloses and lignin from corncobs were studied under varying reaction conditions. LHW pretreatment at 160 °C for 10 min promoted the highest levels of hemicellulose solubilization into the liquid phase, resulting into the maximized pentose yield of 58.8% in the liquid and more than 60% removal of lignin from the solid, with 73.1% glucose recovery from enzymatic hydrolysis of the pretreated biomass using 10 FPU/g Celluclast?. This led to the maximal glucose and pentose recoveries of 81.9 and 71.2%, respectively, when combining sugars from the liquid phase from LHW and hydrolysis of the solid. Scanning electron microscopy revealed disruption of the intact biomass structure allowing increasing enzyme’s accessibility to the cellulose microfibers which showed higher crystallinity index compared to the native biomass as shown by x-ray diffraction with a marked increase in surface area as revealed by BET measurement. The work provides an insight into effects of LHW on modification of physicochemical properties of corncobs and an efficient approach for its processing in biorefinery industry.     

Performances of Lactobacillus brevis for Producing Lactic Acid from Hydrolysate of Lignocellulosics

Utilizing all forms of sugars derived from lignocellulosic biomass via various pretreatment and hydrolysis process is a primary criterion for selecting a microorganism to produce biofuels and biochemicals. A broad carbon spectra and potential inhibitors such as furan, phenol compounds and weak acids are two major obstacles that limited the application of dilute-acid hydrolysate of lignocellulosics in lactic acid fermentation. Two strains of bacteria isolated from sour cabbage, S3F4 (Lactobacillus brevis) and XS1T3-4 (Lactobacillus plantrum), exhibited the ability to utilize various sugars present in dilute-acid hydrolysate of biomass. The S3F4 strain also showed strong resistance to potential fermentation inhibitors such as ferulic acid and furfural. Fermentation in flasks by this strain resulted in 39.1 g/l of lactic acid from dilute acid hydrolysates of corncobs that had initial total sugar concentration of 56.9 g/l (xylose, 46.4 g/l; glucose, 4.0 g/l; arabinose, 6.5 g/l). The hydrolysate of corncobs was readily utilized by S3F4 without detoxification, and the lactic acid concentration obtained in this study was higher compared to other reports.     

Fast Determination of Phenolic Compounds in Brazilian Wines from Vale do São Francisco Region by CE

Six phenolic compounds were separated and determined by capillary zone electrophoresis in red wine from Brazil’s region Vale do São Francisco with total analysis time of 12 min. The limit of detections varied from 1.59 to 2.24 mg L^?1. The relative standard deviations (for n = 6) varied from 0.28 to 3.50 %. The red wine samples analyzed were bought in the local market and the phenolic compound recoveries were in the range of 98–101 %. The concentrations of gallic acid in the samples of wines varied from 16.0 to 42.0 mg L^?1, caffeic acid (3.16–5.18 mg L^?1), syringic acid (5.73–13.0 mg L^?1), kaempferol (2.32–4.33 mg L^?1), quercetin (1.68–4.03 mg L^?1), myricetin (7.52–25.1 mg L^?1). The concentrations found agree with data reported in the literature.     

Analysis of bioaccessible concentration of trace elements in plant based edible materials by INAA and ICPMS methods

The total metal concentration and bioaccessible concentration of Cr, Mn, Fe, Cu, Zn, Se in Momordica charantia, Asparagus racemosus, Terminalia arjuna and Syzyzium cumini were measured by instrumental neutron activation analysis and by inductively coupled plasma mass spectrometry analysis (ICP-MS). The bioaccessible concentrations were determined in the gastrointestinal digest obtained after treating dried powdered samples sequentially in gastric and intestinal fluid of porcine origin at physiological conditions. The bioaccessible concentration of Fe was in the range of 58–67 mg kg^?1, Mn was 10.2–14.6 mg kg^?1, Cu was 3.7–4.8 mg kg^?1 and Zn was 10.6–18.4 mg kg^?1, were within the safety limits set for vegetable food stuff set by Joint FAO/WHO. The bioaccessibility of Zn, an essential element, was high (40–50 %) in M. charantia and in S. cumini. In addition, the total metal contents and bioaccessible concentration of Ni, Se, Cd and Pb in these samples were measured by ICP-MS. The total Cd content in S. cumini (2.6 ± 0.2 mg kg^?1) and its bioaccessible concentration (0.6 mg kg^?1) were strikingly high as compared to the other samples. Though total Hg contents were determined by ICP-MS, but their bioaccessible concentrations were below the detection limit (0.036 mg kg^?1).     

Characterisation of phenolic compounds of the ethyl acetate fraction from Tabernaemontana catharinensis and its potential antidepressant-like effect

This study evaluates the antidepressant-like effect and analysed the qualitative and quantitative 74 phenolic standards of ethyl acetate fraction from Tabernaemontana catharinensis leaves. Acute administration of fraction in mice reduced the immobility time in forced swimming and tail suspension tests confirming its antidepressant-like activity. The anti-immobility effect elicited by this fraction was prevented by the pretreatment of mice with PCPA (100 mg kg^?1), ketanserin (5 mg kg^?1), SCH 23,390 (0.05 mg kg^?1) or yohimbine (1 mg kg^?1). A sub effective dose of the fraction produced a synergistic effect with fluoxetine (5 mg kg^?1). Chromatographic analysis identified 4-hydroxybenzoic and p-coumaric acids in the ethyl acetate fraction from T. catharinensis. Capillary electrophoresis presented 7.34 ± 0.02 mg g^?1 of p-coumaric acid concentration in the fraction. Therefore, it is possible that antidepressant-like effect elicited by ethyl acetate fraction from T. catharinensis be dependent on the p-coumaric acid.     

Lime Pretreatment of Sugarcane Bagasse for Bioethanol Production

The pretreatment of sugarcane bagasse with lime (calcium hydroxide) is evaluated. The effect of lime pretreatment on digestibility was studied through analyses using central composite design (response surface), considering pretreatment time, temperature, and lime loading as factors. The responses evaluated were the yield of glucose from pretreated bagasse after enzymatic hydrolysis. Experiments were performed using the bagasse as it comes from an alcohol/sugar factory (non-screened bagasse) and bagasse in the size range from 0.248 to 1.397 mm (screened bagasse) (12-60 mesh). It was observed that the particle size presented influence in the release of fermentable sugars after enzymatic hydrolysis using low loading of cellulase and β-glucosidase (3.5 FPU/g dry pretreated biomass and 1.0 IU/g dry pretreated biomass, respectively).     

Purification and Characterization of the Xylanase Produced by Jonesia denitrificans BN-13

Jonesia denitrificans BN-13 produces six xylanases: Xyl1, Xyl2, Xyl3, Xyl4, Xyl5, and Xyl6; the Xyl4 was purified and characterized after two consecutive purification steps using ultrafiltration and anion exchange chromatography. The xylanase-specific activity was found to be 77 unit (U)/mg. The molecular weight of the Xyl4 estimated using sodium dodecyl sulfate–polyacrylamide gel electrophoresis (SDS–PAGE) revealed a monomeric isoenzyme of about 42 kDa. It showed an optimum pH value of 7.0 and a temperature of 50 °C. It was stable at 50 °C for 9.34 h. The enzyme showed to be activated by Mn⁺², β-mercaptoethanol, and dithiothreitol (DTT) with a high affinity towards birchwood xylan (with a K _m of 1 mg ml^?1) and hydrolysis of oat-spelt xylan with a K _m of 1.85 mg ml^?1. The ability of binding to cellulose and/or xylan was also investigated.     

High-Throughput Determination of Quinine in Beverages and Soft Drinks Based on Zone-Fluidics Coupled to Monolithic Liquid Chromatography

In the present study we propose a new automated analytical scheme for the determination of quinine in soft drinks and beverages by coupling zone-fluidics (ZF) to liquid chromatography (LC). Certain pretreatment tasks involving precise liquid handling, such as sample dilution and addition of the internal standard (ISTD) were automated by ZF. After on-line filling of the loop of the LC injection valve, separation was carried out in less than 2.5 min by using a reversed phase monolithic column (100 × 4.6 mm i.d.) at a flow rate of 2 mL min^?1. The ZF and LC parts of the setup operated independently: during LC separation the next sample was treated by ZF allowing a high throughput of 24 h^?1. The proposed assay was thoroughly validated in terms of linearity (up to 150 mg L^?1), LOD (0.25 mg L^?1), LOQ (0.8 mg L^?1), precision, accuracy, and ruggedness. The ZF-LC method was successfully applied for the determination of quinine in beverages and soft-drinks.     

Determination of acid volatile sulphur in river sediments by ICP-OES coupled with purge and trap method

The developed and tested method is based on the acid volatile sulphur (AVS) releasing from a sample of sediment by acidification with hydrochloric acid and sequential absorption of released hydrogen sulphide into the absorption solution of sodium hydroxide. Total sulphur absorbed in the absorption solution is subsequently determined by inductively coupled plasma optical emission spectrometry (ICP-OES) technique. The method was tested using both model and real samples of the river sediment. Obtained results were compared with the results of iodometric determination as the method routinely used for the AVS determination. In case of using ICP-OES with purge and trap, there is no spectral interference of calcium; therefore for the determination of sulphur, it is possible to use atomic emission line of sulphur S I 180.7 nm. The tested method provides the results comparable with the iodometric method within the range of tested concentrations. The detection limit (LOD) of this method is 0.09 mg· S^2? ? L^?1 in the absorption solution which corresponds to 0.23 mg S^2?·kg^?1 in a sediment. Value of LOD is comparable with the iodometric determination.     

Novel Method for Selective Spectrophotometric Determination of Titanium(IV) with Water Extract of Slippery Elm Leaf as a New Reagent

Abstract

A novel spectrophotometric method for the determination of titanium(IV) by using a new reagent, water extract of slippery elm leaf is developed. In 0.05 M hydrochloric acid, titanium(IV) reacts with this reagent to form a yellow product. The formed product shows maximum absorbance at 415 nm with a molar absorptivity value of 0.68×10⁴ l mol^–1 cm^–1 and the method was linear in the 0.2–6 µg ml^?1 concentration range. The detection limit value was found to be 0.0131 µg ml^?1. The proposed method was simple, low cost, selective, and sensitive. It was applied to the analytic samples with satisfactory results.     

Tailoring Wet Explosion Process Parameters for the Pretreatment of Cocksfoot Grass for High Sugar Yields

The pretreatment of lignocellulosic biomass is crucial for efficient subsequent enzymatic hydrolysis and ethanol fermentation. In this study, wet explosion (WEx) pretreatment was applied to cocksfoot grass and pretreatment conditions were tailored for maximizing the sugar yields using response surface methodology. The WEx process parameters studied were temperature (160–210 °C), retention time (5–20 min), and dilute sulfuric acid concentration (0.2–0.5 %). The pretreatment parameter set E, applying 210 °C for 5 min and 0.5 % dilute sulfuric acid, was found most suitable for achieving a high glucose release with low formation of by-products. Under these conditions, the cellulose and hemicellulose sugar recovery was 94 % and 70 %, respectively. The efficiency of the enzymatic hydrolysis of cellulose under these conditions was 91 %. On the other hand, the release of pentose sugars was higher when applying less severe pretreatment conditions C (160 °C, 5 min, 0.2 % dilute sulfuric acid). Therefore, the choice of the most suitable pretreatment conditions is depending on the main target product, i.e., hexose or pentose sugars.     

Differential-pulse anodic-stripping voltammetric determination of traces of lead in high-purity copper after its separation by ion exchange

Trace amounts of lead in copper can be determined by differential-pulse anodic-stripping voltammetry after separating it from the matrix. Lead was quantitatively retained on a small Dowex 1-X4 ion-exchange column, without retaining copper when present as a copper-amine complex in solutions containing 0.2 M sodium hydroxide. Subsequent desorption was done with 2 M nitric acid. After deposition for 1 min on a hanging mercury drop electrode and subsequent stripping, the limit of detection was 2 ng ml^?1 and the limit of quantification was 6.6 ng ml^?1. Recoveries of lead were checked by standard addition to copper solution.     

Bioethanol Production from Ipomoea Carnea Biomass Using a Potential Hybrid Yeast Strain

The paper deals with the exploitation of Ipomoea carnea as a feedstock for the production of bioethanol. Dilute acid pretreatment under optimum conditions (3 %H₂SO₄, 120 °C for 45 min) produced 17.68 g L^?1 sugars along with 1.02 g L^?1 phenolics and 1.13 g L^?1 furans. A combination of overliming and activated charcoal adsorption facilitated the removal of 91.9 % furans and 94.7 % phenolics from acid hydrolysate. The pretreated biomass was further treated with a mixture of sodium sulphite and sodium chlorite and, a maximum lignin removal of 81.6 % was achieved. The enzymatic saccharification of delignified biomass resulted in 79.4 % saccharification with a corresponding sugar yield of 753.21 mg g^?1. Equal volume of enzymatic hydrolysate and acid hydrolysate were mixed and used for fermentation with a hybrid yeast strain RPRT90. Fermentation of mixed detoxified hydrolysate at 30 °C for 28 h produced ethanol with a yield of 0.461 g g^?1. A comparable ethanol yield (0.414 g g^?1) was achieved using a mixture of enzymatic hydrolysate and undetoxified acid hydrolysate. Thus, I. carnea biomass has been demonstrated to be a potential feedstock for bioethanol production, and the use of hybrid yeast may pave the way to produce bioethanol from this biomass.     

Determination of Propylene Glycol in Low Volume Plasma and Urine Samples of Neonates by LC with Photodiode Array Detection

In order to enhance the sensitivity and to develop a method suitable for quantification of propylene glycol (PG) in low volume neonate plasma and urine samples, several steps in earlier described high performance liquid chromatographic methods were optimised. Chromatographic separation on a reversed-phase column and ultraviolet detection resulted in cleaner chromatograms without interfering compounds. Linearity of the standard curves was validated in the concentration range 0.25?C50 mg L^?1. The lower limit of quantification was 20 times lower than in earlier described methods. Presented method was suitable for quantification of PG concentrations in low volume neonate plasma (15?C46 mg L^?1) and urine samples (20?C175 mg L^?1) enabling us to document very low renal versus non-renal contribution of PG clearance in neonates.     

Development and Validation of an LC Method for Simultaneous Determination of Ascorbic Acid and Three Phenolic Acids in Sustained Release Tablets at Single Wavelength

A simple, rapid and sensitive column liquid chromatographic method was developed and validated to measure simultaneously the amount of ascorbic acid and phenolic acids at single wavelength (240 nm) in order to assess drug release profiles and drug-excipients compatibility studies for a new sustained release tablet formulation and its subsequent stability studies. A combined isocratic and linear gradient reversed-phase LC method was carried out at 240 nm. Quantification was achieved with reference to the external standards. The linearity for concentrations between 0.042 and 0.150 mg mL^?1 for ascorbic acid, 0.084–0.250 mg mL^?1 for chlorogenic acid, 0.053–0.360 mg mL^?1 for caffeic acid, and 0.016–0.250 mg mL^?1 for ferulic acid (r > 0.99 for all analytes) were established. The recovery of the active ingredients from the samples was at the range of 92.3–102.9%. Intra- and inter-day precisions were less than 2.5%. The limits of detection and quantification were 8 and 24 μg mL^?1 for ascorbic acid, 18 and 54 μg mL^?1 for chlorogenic acid, 37 and 112 μg mL^?1 for caffeic acid, and 11 and 34 μg mL^?1 for ferulic acid. The determination of the four active ingredients was not interfered by the excipients of the products. Samples were stable in the release mediums (37 °C) at least for 12 h.     

Enhanced bacoside production in shoot cultures of Bacopa monnieri under the influence of abiotic elicitors

The effect of different abiotic elicitors [jasmonic acid, copper sulphate (CuSO₄) and salicyclic acid] at varying concentrations on the stimulation of biomass and bacoside production in in vitro Bacopa monnieri shoot culture was studied. A systematic study conducted over a period of 35 days indicated that the maximum bacoside production (6.74 mg g^? 1 dry weight (DW)) was obtained after a lag of 7 days and thereafter, the content decreased gradually to again increase at 28 days (5.91 mg g^? 1 DW). Therefore, elicitation experiments were carried out over a period of 3, 6 and 9 days. The shoot cultures treated with 45 mg L^? 1 of CuSO₄ exhibited the highest bacoside content of 8.73 mg g^? 1 DW (～1.42-fold higher) than in control cultures (6.14 mg g^? 1 DW). This study indicates the effectiveness of abiotic elicitation on bacoside production in in vitro shoot cultures of this medicinally important herb known for its memory-enhancing properties.     

Comparison of Ion-Pairing and Reversed Phase Liquid Chromatography in Determination of Sulfamethoxazole and Trimethoprim

Abstract

Two simple, rapid, and sensitive HPLC methods have been developed for the simultaneous determination of sulfamethoxazole and trimethoprim in their pure and dosage forms, one utilizing reversed phase HPLC and the other ion-pair HPLC. In the reversed phase HPLC method (A) the mobile phase consists of 0.05% aqueous solution of formic acid with pH adjusted to 4.5±0.2 with triethylamine : acetonitrile:tetrahydrofuran 50 : 49 : 1 (v/v), and the mobile phase pumped at flow rate of 1.0 ml min^?1. An Appolo LC18 column (5.0 µm), 250 mm length × 4.6 mm diameter, was utilized as the stationary phase. Detection was affected spectrophotometrically at 254 nm. In the ion-pair HPLC method (B) the mobile phase consisted of methanol : buffer 35 : 65 (v/v) with the buffer composed of potassium dihydrogen phosphate 0.3 M and sodium heptan sulfonic acid 5.0 mM. To 500 ml of buffer was added 2.0 ml triethylamine, and then the pH was adjusted to 5.0 with phosphoric acid, and the mobile phase was pumped at a flow rate of 1.2 ml min^?1. A Hypersil C₁₈ column (5.0 µm), 150 mm length × 4.6 mm diameter, was utilized as the stationary phase. Detection was affected spectrophotometrically at 254 nm. Linearity ranges for sulfamethoxazole and trimethoprim were 1.0–110 and 1.5–98 µg ml^?1, respectively, with method A and 0.5–100 and 1.0–125 µg ml^?1, respectively, with method (B). Minimum detection limits obtained were 0.1969 and 0.3451 µg ml^?1 for sulfamethoxazole and trimethoprim, respectively, with method A, and 0.1377 and 0.2454 µg ml^?1 with method (B). The proposed methods were further applied to the analysis of tablets containing the two drugs, and the results were satisfied.     

Multiplexed microfluidic enzyme assays for simultaneous detection of lipolysis products from adipocytes

Microfluidics has enabled new cell biology experiments. Incorporating chemical monitoring of cellular secretion into chips offers the potential to increase information content and utility of such systems. In this work, an integrated, multilayer polydimethylsiloxane microfluidic chip was developed to simultaneously measure fatty acids and glycerol secreted from cultured adipocytes on chip in near real time. Approximately 48,000 adipocytes were loaded into a cell chamber in a reversibly sealed chip. Cells were perfused at 0.75 μL/min. Cell perfusate was split and directed to separate, continuously operating fluorescent enzyme assay channel networks. The fluorescent assay products were detected simultaneously near the outlet of the chip. The fatty acid and glycerol assays had linear dynamic ranges of 150 and 110 μM and limit of detection (LOD) of 6 and 5 μM, respectively. Surface modifications including pretreatment with sodium dodecyl sulfate were utilized to prevent adsorption of fatty acids to the chip surface. Using the chip, basal fatty acid and glycerol concentrations ranged from 0.18 to 0.7 nmol?×?10⁶ cell^?1 min^?1 and from 0.23 to 0.85 nmol?×?10⁶ cell^?1 min^?1, respectively. Using valves built into the chip, the perfusion solution was switched to add 20 μM isoproterenol, a β-adrenergic agonist, which stimulates the release of glycerol and fatty acids in adipocytes. This manipulation resulted in a rapid and stable 1.5- to 6.0-fold increase of non-esterified fatty acid (NEFA) and glycerol. The ratio of NEFA:glycerol released increased with adipocyte age. These experiments illustrate the potential for performing multiple real-time assays on cells in culture using microfluidic devices.