Summary: An O‐hexyl‐3,5‐bis(terpyridine)phenol ligand has been synthesized and transformed into a hexagonal Zn(II)‐metallomacrocycle by a facile self‐assembly procedure capitalizing on terpyridine‐Zn(II)‐terpyridine connectivity. The structural composition was confirmed by NMR and mass spectral techniques; photo‐ and electroluminescence properties were also investigated. The OLED device shows green electroluminescent emission at 515 nm with a maximum luminance of 39 cd · m−2 and maximum efficiency of 0.16 cd · A−1.
Structure and electroluminescent properties of the metallomacrocycle investigated. 相似文献
We present an efficient method for functionalizing the large polymer–air interface of a gyroid nanoporous polymer. The hydrophilicity of nanoporous cross‐linked 1,2‐polybutadiene is tuned by thiol‐ene photo‐grafting of mercaptosuccinic acid or sodium 2‐mercaptoethanesulfonate. The reaction is monitored by FT‐IR, UV–Vis, contact angle, and gravimetry. Overall quantum yields are calculated for the two thiol‐ene “click” reactions in nano‐confinement, neatly revealing their chain‐like nature. Top–down photolithographic patterning is demonstrated, realizing hydrophilic nanoporous “corridors” exclusively hosting water. The presented approach can be relevant for many applications where, e.g., high control and contrast in hydrophilicity, chemical functionality or refractive index are needed.
Highly dispersed ZnO nanoparticles with variable particle sizes were successfully prepared within an amphiphilic hyperbranched polyetherpolyol matrix via decomposition of an organometallic precursor in the presence of air leading to stable nanocomposites. The high degree of stabilization during and after the synthesis by the polymer permits control over the nanoparticle size and therefore, due to the quantum‐size‐effect, the particle properties. Furthermore, these polymer‐inorganic nanocomposites can easily be dispersed in apolar solvents to yield highly transparent, stable solutions.
Summary: A drop‐on‐demand ink‐jet printer has been used to print a silver‐organic solution onto glass substrates. Conductive silver tracks were obtained by heat treatment of the ink‐jet printed deposits at temperatures ranging from 125 °C–200 °C in air. Resistivity values were found to have dropped to two to three times the theoretical resisitivity of bulk silver after temperatures of 150 °C and above were used.
Summary: A water‐soluble gold nanoparticle aggregate 2 was prepared by chloroauric acid and a polypseudorotaxane 1 of mono‐6‐thio‐β‐cyclodextrin with poly(propylene glycol) bis(2‐aminopropyl ether) ( ≈ 2 000) in the presence of sodium borohydride in N,N‐dimethylformamide (DMF) solution. The investigative results indicated that the gold nanoparticle aggregate 2 might act as an efficient DNA‐cleavage reagent.
A typical TEM image of gold nanoparticle aggregate 2 . 相似文献
Summary: Fabrication of honeycomb‐patterned films from amphiphilic dendronized block copolymer (PEO113‐b‐PDMA82) by ‘on‐solid surface spreading’ and ‘on‐water spreading’ method is reported. Highly ordered honeycomb films with quasi‐horizontally paralleled double‐layered structure can be fabricated by the on‐solid surface spreading method. This work raises the possibility that such structures can be formed in amphiphilic dendronized block copolymers and extends the family of source materials.
We report the use of a PTFE‐based microfluidic device for the encapsulation of living, therapeutically‐active cells within monodisperse alginate microspheres. We present a novel microfluidic platform and a flexible experimental method for the production of alginate microspheres. Cell lines HEK293, U‐2 OS and PC12 were separately encapsulated using this method, with minimal loss of cell viability.
Bis(2,2′:6′,2″‐terpyrid‐4′‐yl) diethylene glycol was synthesized as a monomer unit and further utilized for polymerization with FeCl2 in order to form water‐soluble coordination polymers. Viscosity measurements and film‐forming properties indicate the formation of linear coordination polymers or larger ring structures. The terpyridine/iron(II) complexes are stable up to temperatures of 210 °C, but can be uncomplexed by the addition of an excess of a strong competitive ligand (HEDTA) under mild conditions.
Self‐assembly of poly(2‐vinylpyridine)‐block‐poly(ϵ‐caprolactone) (P2VP‐b‐PCL) diblock copolymer in the presence of a selective solvent is investigated by transmission electron microscopy and atomic force microscopy. Addition of water into a P2VP‐b‐PCL solution in N,N‐dimethylformamide at 20 °C produces elongated truncated lozenge shaped single crystals of uniform size and shape in large quantities. The single crystals are composed of PCL single‐crystal layer sandwiched between two P2VP layers tethered on the top and bottom basal surfaces. The formation of the single crystals is found to depend on the temperature. These findings provide a facile approach to the preparation of uniform single crystals in large quantities.
Mussel adhesives function as tools for surface modifications of a wide variety of materials due to their remarkable adhesion properties. Herein, a combination of bioinspired mussel adhesives based on a dopamine derivative, polymer chemistry, and well‐established Diels–Alder (DA) chemistry leads to a bioinspired switchable surface system that possesses the capability of attaching and detaching specific polymers on demand. A dopaminemaleimide compound, which has been attached to a gold surface under maritime conditions undergoes DA‐ and retro‐DA‐click‐conjugations with cyclopentadiene‐carrying PEG chains. The surface attachment and the subsequent DA/rDA cycles are evidenced via XPS analysis.
Summary: A chiral, regioregular poly[3‐(4‐alkoxyphenyl)thiophene] has been prepared and studied. Films prepared by fast evaporation of the solvent, consist of random‐coils, while films prepared by slow evaporation are composed of chirally aggregated, coplanar strands. Heat treatment transforms the random‐coils into aggregated films via an intermediate state, which was characterized as chiral, coplanar, unaggregated polymer strands.
Overview of the possible aggregation processes. 相似文献
We report for the first time the preparation of single polypyrrole (PPy) molecule chains using a “metal‐organic framework” with 1 nm channels as a template. The obtained one‐dimensional (1‐D) PPy has highly structure order and excellent conductivity, which has improved by as much as five orders of magnitude in comparison with that of 2‐D PPy.
Blue‐light‐emitting 2,7‐carbazole‐based conjugated copolymers have been prepared by Yamamoto or Suzuki cross‐coupling reactions. By introducing highly substituted aromatic comonomers, fully soluble high‐molecular‐weight copolymers have been obtained. Moreover, these amorphous polymeric materials exhibit good thermal stability and interesting redox properties. All these features make these new conjugated polymers highly promising for the development of single‐polymer‐layer blue‐light‐emitting diodes.
Supramolecular poly(vinyl acetate) PVAc 3‐arms stars were successfully generated by Reversible Addition–Fragmentation chain Transfer (RAFT)‐polymerized chains bearing hydrogen‐bonding heterocomplementary associating units. Chain Transfer Agents (CTA) bearing thymine‐ and diaminopyridine‐based units were first synthesized and proved to mediate efficiently the polymerization of VAc. The binding ability of the chains in solution was then demonstrated by 1H NMR and GPC measurements, proving the formation of the supramolecular stars.
