Thermo‐ and pH‐responsive gradient and block copolymers based on 2‐(2‐methoxyethoxy)ethyl methacrylate synthesized via atom transfer radical polymerization and the formation of thermoresponsive surfaces

A series of gradient and block copolymers, based on 2‐(2‐methoxyethoxy)ethyl methacrylate (MEO₂MA) and tert‐butyl acrylate (^tBA), were synthesized by atom transfer radical polymerization (ATRP) in a first step. The MEO₂MA monomer leads to the production of thermosensitive polymers, exhibiting lower critical solution temperature (LCST) at around room temperature, which could be adjusted by changing the proportion of ^tBA in the copolymer. In a second step, the tert‐butyl groups of ^tBA were hydrolyzed with trifluoroacetic acid to form the corresponding block and gradient copolymers of MEO₂MA and acrylic acid (AA), which exhibited both temperature and pH‐responsive behavior. These copolymers showed LCST values strongly dependent on the pH. At acid pH, a slightly decrease of LCST with an increase of AA in the copolymer was observed. However, at neutral or basic conditions, ionization of acid groups increases the hydrophilic balance considerably raising the LCST values, which even become not observable over the temperature range under study. In the last step, these carboxylic functionalized copolymers were covalently bound to biocompatible and biodegradable films of poly(3‐hydroxybutyrate‐co‐3‐hydroxyhexanoate) [P(HB‐co‐HHx)] obtained by casting and, previously treated with ethylenediamine (ED) to render their surfaces with amino groups. Thereby, thermosensitive surfaces of modified P(HB‐co‐HHx) could be obtained. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Preparation of oriented β‐form poly(L‐lactic acid) by solid‐state extrusion

Melt‐crystallized, low molecular weight poly(L ‐lactic acid) (PLLA) consisting of α crystals was uniaxially drawn by solid‐state extrusion at an extrusion temperature (T_ext) of 130–170 °C. A series of extrusion‐drawn samples were prepared at an optimum T_ext value of 170 °C, slightly below the melting temperature (T_m) of α crystals (～180 °C). The drawn products were characterized by deformation flow profiles, differential scanning calorimetry (DSC) melting thermograms, wide‐angle X‐ray scattering (WAXD), and small‐angle X‐ray scattering as a function of the extrusion draw ratio (EDR). The deformation mode in the solid‐state extrusion of semicrystalline PLLA was more variable and complex than that in the extensional deformation expected in tensile drawing, which generally gave a mixture of α and β crystals. The deformation profile was extensional at a low EDR and transformed to a parabolic shear pattern at a higher EDR. At a given EDR, the central portion of an extrudate showed extensional deformation and the shear component became progressively more significant, moving from the center to the surface region. The WAXD intensities of the (0010)_α and (003)_β reflections on the meridian as well as the DSC melting thermograms showed that the crystal transformation from the initial α form to the oriented β form proceeded rapidly with increasing EDR at an EDR greater than 4. Furthermore, WAXD showed that the crystal transformation proceeded slightly more rapidly at the sheath region than at the core region. This fact, combined with the deformation profiles (shear at the sheath and extensional at the core), indicated that the crystal transformation was promoted by shear deformation under a high pressure rather than by extensional deformation. Thus, a highly oriented rod consisting of only β crystals was obtained by solid‐state extrusion of melt‐crystallized, low molecular weight PLLA slightly below T_m. The structure and properties of the α‐ and β‐form crystals were also studied. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 40: 95–104, 2002     

Studies on Binary Blends of Poly(3‐hydroxybutyrate‐co‐3‐hydroxyhexanoate) and Natural Polyphenol Catechin: Specific Interactions and Thermal Properties

The existence of a specific intermolecular hydrogen‐bonding interaction between poly(3‐hydroxybutyrate‐co‐3‐hydroxyhexanoate) [P(3HB‐co‐3HH)] and (+)‐catechin in their blends was demonstrated by Fourier‐transform infrared spectroscopy (FT‐IR). It was found that the experimentally estimated fraction of hydrogen‐bonded carbonyl groups was much lower than the theoretically predicted maximum fraction. Only one glass transition temperature (T_g) occurred in the blends with the compositions detected by differential scanning calorimetry (DSC), being further confirmed by the results of dynamic mechanical thermal analysis (DMTA). The decrease of the melting point (T_m) and the increase of the glass transition temperature of the blends observed by the DSC measurements also suggested the existence of a strong intermolecular interaction. It was interesting to note that, as a low‐molecular‐weight compound, catechin showed a glass transition, which arises from strong self‐association. As expected, the crystalline structure of P(3HB‐co‐3HH) in the blends showed no change, but the crystallinity of the copolymer component in the blends, calculated by wide‐angle X‐ray diffraction, decreased with the increase of catechin weight content. Investigated by tensile experiments, the maximum strength and modulus decreased sharply with the increase of catechin content; on the contrary, the elongation changed slowly.

The FT‐IR spectra in the wave‐number 1 680–1 780 cm^?1 region for blends of P(3HB‐co‐3HH)/catechin. A: HBH; B: HBHC10; C: HBHC20; D: HBHC30; E: HBHC40; F: HBHC50; and G: catechin.     

Blends of poly(3‐hydroxybutyrate)/4,4′‐thiodiphenol and poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)/ 4,4′‐thiodiphenol: Specific interaction and properties

The specific interaction between poly(3‐hydroxybutyrate) [P(3HB)] and 4,4′‐thiodiphenol (TDP) and between poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) and TDP was investigated by Fourier transform infrared (FTIR) spectroscopy. Interassociated hydrogen bonds were found between the polyester chains and the TDP molecules in the binary blends. The fractions of associated carbonyl groups, F_b 's, in the blends first increased and then decreased as the TDP content increased. The thermal and dynamic mechanical properties of P(3HB)–TDP and PHBV–TDP blends were investigated by differential scanning calorimetry and dynamic mechanical thermal analysis, respectively. Thermal analysis revealed that the P(3HB)–TDP blends possessed eutectic phase behavior. Furthermore, it was found that the thermal and dynamic mechanical properties of P(3HB) and PHBV were greatly modified through blending with TDP. Environmental degradability in river water was evaluated by a biochemical oxygen demand tester, and it was clarified that TDP lowered the degradation rate of P(3HB). The results suggest that TDP is effective in modifying the physical properties as well as the biodegradability of polyesters. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2891–2900, 2000     

Improved Synthesis of 2,2‐Arylmethylene Bis(3‐hydroxy‐5,5‐dimethyl‐2‐cyclohexene‐1‐one) and 1,8‐Dioxo‐octahydroxanthene Derivatives Catalyzed by Electrogenerated Base and Sulfuric Acid

An efficient method has been developed for the synthesis of 1,8‐dioxo‐octahydroxanthene derivatives in two‐step. In the first step, the electrogenerated base (EGB) catalyzed multicomponent transformation of dimedone and aromatic aldehydes in an undivided cell in the presence of sodium bromide as an electrolyte into 2,2′‐arylmethylene bis(3‐hydroxy‐5,5‐dimethyl‐2‐cyclohexene‐1‐one) at room temperature. In the second step, H₂SO₄ was employed as a dehydrating reagent for the cyclization process to give symmetrical heterocycles 1,8‐dioxo‐octahydroxanthene derivatives. Short reaction time, convenient work up, and using of inexpensive reagents, simple equipment, novel and eco‐friendly procedure make this strategy more useful for the preparation of xanthene derivatives.     

Influence of multiple processing on selected properties of poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate)

The effect of multiple (up to 10 times) injection molding of processed poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) (P(3,4HB)) on its phase transition temperatures, degree of crystallinity, degradation temperature, mass flow rate, mechanical properties, dynamic mechanical properties, and Charpy's impact strength is presented. The studies have shown that the multiple injection lowers the degree of crystallinity and the thermal stability of P(3,4HB). The mass flow rate values increased with increasing the injection number. It was found that the multiple injections had no substantial effect on the tensile strength up to 10 injection cycles and the tensile strength at break, tensile strain at tensile strength, and tensile strain at break up to 6 injection cycles. The maximum value of storage modulus at 30 °C and impact strength were recorded for sample after 4 cycles of injection, while the values of storage modulus at 120 °C increased with increase of the injection cycles. Copyright © 2015 John Wiley & Sons, Ltd.     

Facile Synthesis of Substituted Ethyl 2‐(Chloromethyl)‐2‐hydroxy‐2H‐1‐benzopyran‐3‐carboxylates

Ethyl 2‐(chloromethyl)‐2‐hydroxy‐2H‐chromene‐3‐carboxylates 2a – 2j have been synthesized by reaction of substituted salicylaldehydes with ethyl 4‐chloro‐3‐oxobutanoate, in the presence of piperidine in CH₂Cl₂ at room temperature, in good yields.     

A Simple Synthesis of Polyfunctionalized 4‐Aminopyrazolidin‐3‐ones as ‘Aza‐deoxa’ Analogs of D‐Cycloserine

A simple five‐step synthesis of fully substituted (4RS,5RS)‐4‐aminopyrazolidin‐3‐ones as analogs of D ‐cycloserine was developed. It comprises a two‐step preparation of 5‐substituted (4RS,5RS)‐4‐(benzyloxycarbonylamino)pyrazolidin‐3‐ones, reductive alkylation at N(1), alkylation of the amidic N(2) with alkyl halides, and simultaneous hydrogenolytic deprotection/reductive alkylation of the primary NH₂ group. The synthesis enables an easy stepwise functionalization of the pyrazolidin‐3‐one core with only two types of common reagents, aldehydes (or ketones) and alkyl halides. The structures of products were elucidated by NMR spectroscopy and X‐ray diffraction.     

Lipase‐Catalyzed Ring‐Opening Polymerization of β‐Butyrolactone: End‐Group Analysis of Poly(3‐hydroxybutanoate) Using Supercritical Fluid Chromatography

The ring‐opening polymerization of (R,S)‐β‐butyrolactone (BL) in bulk was analyzed with respect to the polymer structure of the resulting poly[(R,S)‐3‐hydroxybutanoate)] [P(3HB)] by isolation of the pure form using preparative supercritical CO₂ fluid chromatography. It was confirmed that the four‐membered BL was polymerized in bulk by lipase to yield the corresponding cyclic, hydroxy‐ and crotonate‐terminated P(3HB)s. The relative ratios of the three types of polymers depended on the lipase concentration as well as on the monomer conversion. It was also confirmed that both cyclic and linear P(3HB) polymer species were subject to hydrolysis, and inter‐ and intramolecular transesterification by lipase to produce two series of polymers having linear and cyclic structures with higher and lower molecular weight. The formation of the cyclic P(3HB) iss regarded as the characteristic feature of the lipase‐catalyzed polymerization of BL.     

3‐miktoarm star terpolymers using triple click reactions: Diels–Alder,copper‐catalyzed azide‐alkyne cycloaddition,and nitroxide radical coupling reactions

Well‐defined linear furan‐protected maleimide‐terminated poly(ethylene glycol) (PEG‐MI), tetramethylpiperidine‐1‐oxyl‐terminated poly(ε‐caprolactone) (PCL‐TEMPO), and azide‐terminated polystyrene (PS‐N₃) or ‐poly(N‐butyl oxanorbornene imide) (PONB‐N₃) were ligated to an orthogonally functionalized core ( 1 ) in a two‐step reaction mode through triple click reactions. In a first step, Diels–Alder click reaction of PEG‐MI with 1 was performed in toluene at 110 °C for 24 h to afford α‐alkyne‐α‐bromide‐terminated PEG (PEG‐alkyne/Br). As a second step, this precursor was subsequently ligated with the PCL‐TEMPO and PS‐N₃ or PONB‐N₃ in N,N‐dimethylformamide at room temperature for 12 h catalyzed by Cu(0)/Cu(I) through copper‐catalyzed azide‐alkyne cycloaddition and nitroxide radical coupling click reactions, yield resulting ABC miktoarm star polymers in a one‐pot mode. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Antibacterial poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) fibrous membranes containing quaternary ammonium salts

In this study, antimicrobial membranes based on biodegradable material poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) [P(3HB‐4HB)] and quaternary ammonium salts (QASs) by two methods have been performed. Three QASs with varied alkyl chain lengths have been synthesized successfully and characterized by ¹H nuclear magnetic resonance and Fourier transform infrared. The synthesized QASs were blended with P(3HB‐4HB) and electrospun into composite fibrous membranes or casted into conventional membranes. Electrospun fibrous membranes with large surface areas are a superior type of antimicrobial biomaterials, and they exhibit preferable properties than solution casting membranes. Specifically, electrospun fibrous membranes are tougher and can inactivate both Gram‐positive Staphylococcus aureus and Gram‐negative Escherichia coli O157:H7 in a contact time of 30 min, whereas the solution casting membranes cannot. The length of alkyl chain in the quaternary ammonium groups on the modified P(3HB‐4HB) membranes is able to influence the antimicrobial activity. This type of antimicrobial material may have potential applications in biomaterial field. Copyright © 2016 John Wiley & Sons, Ltd.     

Redetermination of cis‐4‐cyclo­hexene‐1,2‐di­carboxyl­ic acid at 173 K

The structure of the title compound, C₈H₁₀O₄, previously determined by Küppers & Kim [Acta Cryst. (1993), C 49 , 1218–1220] has been redetermined at 173 K. The cyclo­hexene ring exhibits a half‐chair conformation. The molecular geometry and the crystal packing, which is stabilized by two hydrogen bonds, agree well with the room‐temperature structure determination.     

Investigation of Mizoroki‐Heck coupling polymerization as a catalyst‐transfer condensation polymerization for synthesis of poly(p‐phenylenevinylene)

Mizoroki‐Heck coupling polymerization of 1,4‐bis[(2‐ethylhexyl)oxy]‐2‐iodo‐5‐vinylbenzene ( 1 ) and its bromo counterpart 2 with a Pd initiator for the synthesis of poly(phenylenevinylene) (PPV) was investigated to see whether the polymerization proceeds in a chain‐growth polymerization manner. The polymerization of 1 with ^tBu₃PPd(Tolyl)Br ( 10 ) proceeded even at room temperature when 5.5 equiv of Cy₂NMe (Cy = cyclohexyl) was used as a base, but the molecular weight distribution of PPV was broad. The polymerization of 2 hardly proceeded at room temperature under the same conditions. In the polymerization of 1 , PPV with H at one end and I at the other was formed until the middle stage, and the polymer end groups were converted into tolyl and H in the final stage. The number‐average molecular weight (M_n) did not increase until about 90% monomer conversion and then sharply increased after that, indicating conventional step‐growth polymerization. The occurrence of step‐growth polymerization, not catalyst‐transfer chain‐growth polymerization, may be interpreted in terms of low coordination ability of H‐Pd(II)‐X(^tBu₃P) (X = Br or I), formed in the catalytic cycle of the Mizoroki‐Heck coupling reaction, to π‐electrons of the PPV backbone; reductive elimination of H‐X from this Pd species with base would take place after diffusion into the reaction mixture. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 543–551     

A novel azocompound, 2‐(4‐phenylazoaniline)‐4‐phenylphenol: Spectroscopic and quantum‐chemical approach

A novel azocompound with two nonequivalents azo groups, 2‐(4‐phenylazoaniline)‐4‐phenylphenol, was synthesized and characterized by spectroscopic and computational analysis. An intramolecular hydrogen bonding (HB), ? O₁? H₁ ··· N₁? , involving the ? N₁?N₂? group and the proton in a neighbor hydroxyl moiety, was identified. It was found responsible for a characteristic π‐conjugated H₁? O₁? C₁₈?C₁₃? N₂?N₁? six‐membered cyclic fragment. It is worth noting that this azo group is involved in an azo‐hydrazo equilibrium, being the azo form the most stable one. This resonance‐assisted HB was characterized using the OH‐related infrared bands and the corresponding signals in ¹H NMR. In addition, conformational studies and geometrical and electronic parameter calculations were performed using the density functional theory, at B3LYP/6‐311++G** level. Bond and ring critical points were identified using the atoms in molecules theory, which allowed confirming the intramolecular HB. The second azo‐group cannot be involved in HB, but it also presents two stereoisomerics forms corresponding to cis (Z) and trans (E) configurations, with the later being the one with the lowest energy. © 2013 Wiley Periodicals, Inc.     

High‐ and low‐temperature phases in isostructural 4‐chloro‐3‐nitroaniline and 4‐iodo‐3‐nitroaniline

The structures of 4‐chloro‐3‐nitroaniline, C₆H₅ClN₂O₂, (I), and 4‐iodo‐3‐nitroaniline, C₆H₅IN₂O₂, (II), are isomorphs and both undergo continuous (second order) phase transitions at 237 and 200 K, respectively. The structures, as well as their phase transitions, have been studied by single‐crystal X‐ray diffraction, Raman spectroscopy and difference scanning calorimetry experiments. Both high‐temperature phases (293 K) show disorder of the nitro substituents, which are inclined towards the benzene‐ring planes at two different orientations. In the low‐temperature phases (120 K), both inclination angles are well maintained, while the disorder is removed. Concomitantly, the b axis doubles with respect to the room‐temperature cell. Each of the low‐temperature phases of (I) and (II) contains two pairs of independent molecules, where the molecules in each pair are related by noncrystallographic inversion centres. The molecules within each pair have the same absolute value of the inclination angle. The Flack parameter of the low‐temperature phases is very close to 0.5, indicating inversion twinning. This can be envisaged as stacking faults in the low‐temperature phases. It seems that competition between the primary amine–nitro N—H...O hydrogen bonds which form three‐centred hydrogen bonds is the reason for the disorder of the nitro groups, as well as for the phase transition in both (I) and (II). The backbones of the structures are formed by N—H...N hydrogen bonding of moderate strength which results in the graph‐set motif C(3). This graph‐set motif forms a zigzag chain parallel to the monoclinic b axis and is maintained in both the high‐ and the low‐temperature structures. The primary amine groups are pyramidal, with similar geometric values in all four determinations. The high‐temperature phase of (II) has been described previously [Garden et al. (2004). Acta Cryst. C 60 , o328–o330].     

Mechanical properties and structure of the zone‐drawn poly(L‐lactic acid) fibers

The zone‐drawing (ZD) method was applied three times to the melt‐spun poly(L ‐lactic acid) (PLLA) fibers of low molecular weight (M_v = 13,100) at different temperatures under various tensions. The mechanical properties and superstructure of the ZD fibers were investigated. The resulting ZD‐3 fiber had a draw ratio of 10.5, birefringence of 37.31 × 10⁻³, and crystallinity of 37%, while an orientation factor of crystallites remarkably increased to 0.985 by the ZD‐1. The Young's modulus and tensile strength of the ZD‐3 fiber respectively attained 9.1 GPa and 275 MPa, and the dynamic storage modulus was 10.4 GPa at room temperature. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 991–996, 1999     

Synthesis,Structural Characterization,Photophysics, and Broadband Nonlinear Absorption of a Platinum(II) Complex with the 6‐(7‐Benzothiazol‐2′‐yl‐9,9‐diethyl‐9 H‐fluoren‐2‐yl)‐2,2′‐bipyridinyl Ligand

A platinum complex with the 6‐(7‐benzothiazol‐2′‐yl‐9,9‐diethyl‐9H‐fluoren‐2‐yl)‐2,2′‐bipyridinyl ligand ( 1 ) was synthesized and the crystal structure was determined. UV/Vis absorption, emission, and transient difference absorption of 1 were systematically investigated. DFT calculations were carried out on 1 to characterize the electronic ground state and aid in the understanding of the nature of low‐lying excited electronic states. Complex 1 exhibits intense structured ¹π–π* absorption at λ_abs<440 nm, and a broad, moderate ¹M LCT/¹LLCT transition at 440–520 nm in CH₂Cl₂ solution. A structured ³π–π*/³M LCT emission at about 590 nm was observed at room temperature and at 77 K. Complex 1 exhibits both singlet and triplet excited‐state absorption from 450 nm to 750 nm, which are tentatively attributed to the ¹π–π* and ³π–π* excited states of the 6‐(7‐benzothiazol‐2′‐yl‐9,9‐diethyl‐9H‐fluoren‐2‐yl)‐2,2′‐bipyridine ligand, respectively. Z‐scan experiments were conducted by using ns and ps pulses at 532 nm, and ps pulses at a variety of visible and near‐IR wavelengths. The experimental data were fitted by a five‐level model by using the excited‐state parameters obtained from the photophysical study to deduce the effective singlet and triplet excited‐state absorption cross sections in the visible spectral region and the effective two‐photon absorption cross sections in the near‐IR region. Our results demonstrate that 1 possesses large ratios of excited‐state absorption cross sections relative to that of the ground‐state in the visible spectral region; this results in a remarkable degree of reverse saturable absorption from 1 in CH₂Cl₂ solution illuminated by ns laser pulses at 532 nm. The two‐photon absorption cross sections in the near‐IR region for 1 are among the largest values reported for platinum complexes. Therefore, 1 is an excellent, broadband, nonlinear absorbing material that exhibits strong reverse saturable absorption in the visible spectral region and large two‐photon‐assisted excited‐state absorption in the near‐IR region.     

A low‐temperature modification of hexa‐tert‐butyldisilane and a new polymorph of 1,1,2,2‐tetra‐tert‐butyl‐1,2‐diphenyldisilane

Crystals of hexa‐tert‐butyldisilane, C₂₄H₅₄Si₂, undergo a reversible phase transition at 179 (2) K. The space group changes from Ibca (high temperature) to Pbca (low temperature), but the lattice constants a, b and c do not change significantly during the phase transition. The crystallographic twofold axis of the molecule in the high‐temperature phase is replaced by a noncrystallographic twofold axis in the low‐temperature phase. The angle between the two axes is 2.36 (4)°. The centre of the molecule undergoes a translation of 0.123 (1) Å during the phase transition, but the conformation angles of the molecule remain unchanged. Between the two tri‐tert‐butylsilyl subunits there are six short repulsive intramolecular C—H...H—C contacts, with H...H distances between 2.02 and 2.04 Å, resulting in a significant lengthening of the Si—Si and Si—C bonds. The Si—Si bond length is 2.6863 (5) Å and the Si—C bond lengths are between 1.9860 (14) and 1.9933 (14) Å. Torsion angles about the Si—Si and Si—C bonds deviate by approximately 15° from the values expected for staggered conformations due to intramolecular steric H...H repulsions. A new polymorph is reported for the crystal structure of 1,1,2,2‐tetra‐tert‐butyl‐1,2‐diphenyldisilane, C₂₈H₄₆Si₂. It has two independent molecules with rather similar conformations. The Si—Si bond lengths are 2.4869 (8) and 2.4944 (8) Å. The C—Si—Si—C torsion angles deviate by between −3.4 (1) and −18.5 (1)° from the values expected for a staggered conformation. These deviations result from steric interactions. Four Si—C(t‐Bu) bonds are almost staggered, while the other four Si—C(t‐Bu) bonds are intermediate between a staggered and an eclipsed conformation. The latter Si—C(t‐Bu) bonds are about 0.019 (2) Å longer than the staggered Si—C(t‐Bu) bonds.     

One‐Pot Synthesis of 2‐Substituted 4‐Aryl‐4,5‐dihydro‐3,1‐benzoxazepines from 2‐(2‐Aminophenyl)‐1‐arylethanols via Dehydration of the Corresponding Amides

An efficient method for the preparation of 2‐substituted 4‐aryl‐4,5‐dihydro‐3,1‐benzoxazepine derivatives under mild conditions has been developed. The reaction of 2‐(2‐aminophenyl)ethanols 1 with acid chlorides in the presence of excess Et₃N in THF at room temperature gave the corresponding N‐acylated intermediates 2 , which were dehydrated by treatment with POCl₃ to give 2‐substituted 4‐aryl‐4,5‐dihydro‐3,1‐benzoxazepines 3 in a one‐pot reaction.     

Synthesis of 4‐((2‐hydroxynaphthalen‐1‐yl)(aryl)methyl)‐5‐methyl‐2‐phenyl‐1H‐pyrazol‐3(2H)‐ones using nano‐Zn‐[2‐boromophenyl‐salicylaldimine‐methylpyranopyrazole]Cl2 nanoparticles

Nano‐Zn‐[2‐boromophenyl‐salicylaldimine‐methylpyranopyrazole]Cl₂ (nano‐[Zn‐2BSMP]Cl₂) as a nanoparticle Schiff base complex and a catalyst was introduced for the solvent‐free synthesis of 4‐((2‐hydroxynaphthalen‐1‐yl)(aryl)methyl)‐5‐methyl‐2‐phenyl‐1H‐pyrazol‐3(2H)‐ones by the multicomponent condensation reaction of various aromatic aldehydes, β‐naphthol, ethyl acetoacetate, and phenyl hydrazine at room temperature.