Synthesis of well‐defined miktoarm star polymers of poly(dimethylsiloxane) by the combination of chlorosilane and benzyl chloride linking chemistry

A series of novel four‐arm A₂B₂ and A₂BC and five‐arm A₂B₂C miktoarm star polymers, where A is poly(dimethylsiloxane) (PDMS), B is polystyrene (PS), and C is polyisoprene (PI), were successfully synthesized by the combination of chlorosilane and benzyl chloride linking chemistry. This new and general methodology is based on the linking reaction of in‐chain benzyl chloride functionalized poly(dimethylsiloxane) (icBnCl–PDMS) with the in‐chain diphenylalkyl (icD) living centers of PS‐DLi‐PS, PS‐DLi‐PI, or (PS)₂‐DLi‐PI. icBnCl–PDMS was synthesized by the selective reaction of lithium PDMS enolate (PDMSOLi) with the chlorosilane groups of dichloro[2‐(chloromethylphenyl)ethyl]methylsilane, leaving the benzyl chloride group intact. The icD living polymers, characterized by the low basicity of DLi to avoid side reactions with PDMS, were prepared by the reaction of the corresponding living chains with the appropriate chloro/bromo derivatives of diphenylethylene, followed by a reaction with BuLi or the living polymer. The combined molecular characterization results of size exclusion chromatography, ¹H NMR, and right‐angle laser light scattering revealed a high degree of structural and compositional homogeneity in all miktoarm stars prepared. The power of this general approach was demonstrated by the synthesis of a morphologically interesting complex miktoarm star polymer composed of two triblock terpolymer (PS‐b‐PI‐b‐PDMS) and two diblock copolymer (PS‐b‐PI) arms. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6587–6599, 2006     

Synthesis of graft polymers with poly(isoprene) as main chain by living anionic polymerization mechanism

The graft polymers [poly(isoprene)‐graft‐poly(styrene)] (PI‐g‐PS), [poly(isoprene)‐graft‐poly(isoprene)] (PI‐g‐PI), [poly(isoprene)‐graft‐(poly(isoprene)‐block‐poly(styrene))] PI‐g‐(PI‐b‐PS), and [poly(isoprene)‐graft‐(poly(styrene)‐block‐poly(isoprene))] PI‐g‐(PS‐b‐PI) with PI as main chain were synthesized through living anionic polymerization (LAP) mechanism and the efficient coupling reaction. First, the PI was synthesized by LAP mechanism and epoxidized in H₂O₂/HCOOH system for epoxidized PI (EPI). Then, the graft polymers with controlled molecular weight of main chain and side chains, and grafting ratios were obtained by coupling reaction between PI^?Li⁺, PS^?Li⁺, PS‐b‐PI^?Li⁺, or PI‐b‐PS^?Li⁺ macroanions and the epoxide on EPI. The target polymers and all intermediates were well characterized by SEC,¹H NMR, as well as their thermal properties were also evaluated by DSC. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and characterization of model diblock copolymers of poly(dimethylsiloxane) with poly(1,4‐butadiene) or poly(ethylene)

Model diblock copolymers of poly(1,4‐butadiene) (PB) and poly(dimethylsiloxane) (PDMS), PB‐b‐PDMS, were synthesized by the sequential anionic polymerization (high vacuum techniques) of butadiene and hexamethylciclotrisiloxane (D₃) in the presence of sec‐BuLi. By homogeneous hydrogenation of PB‐b‐PDMS, the corresponding poly(ethylene) and poly(dimethylsiloxane) block copolymers, PE‐b‐PDMS, were obtained. The synthesized block copolymers were characterized by nuclear magnetic resonance (¹H and ¹³C NMR), size‐exclusion chromatography (SEC), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), transmission electron microscopy (TEM), and rheology. SEC combined with ¹H NMR analysis indicates that the polydispersity index of the samples (M_w/M_n) is low, and that the chemical composition of the copolymers varies from low to medium PDMS content. According to DSC and TGA experiments, the thermal stability of these block copolymers depends on the PDMS content, whereas TEM analysis reveals ordered arrangements of the microphases. The morphologies observed vary from spherical and cylindrical to lamellar domains. This ordered state (even at high temperatures) was further confirmed by small‐amplitude oscillatory shear flow tests. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1579–1590, 2006     

Double hydrophilic block copolymers of sodium(2‐sulfamate‐3‐carboxylate)isoprene and ethylene oxide

Poly(sodium(2‐sulfamate‐3‐carboxylate)isoprene)‐b‐poly(ethylene oxide) and poly(ethylene oxide)‐b‐poly(sodium(2‐sulfamate‐1‐carboxylate)isoprene)‐b‐poly(ethylene oxide) double hydrophilic block copolymers were prepared by selective post polymerization reaction of the polyisoprene block, of poly(isoprene‐b‐ethylene oxide) diblocks or poly(ethylene oxide‐b‐isoprene‐b‐ethylene oxide) triblock precursors, with N‐chlorosulfonyl isocyanate. The precursors were synthesized by anionic polymerization high vacuum techniques and had narrow molecular weight distributions and predictable molecular weights and compositions. The resulting double hydrophilic block copolymers were characterized by FTIR and potentiometric titrations in terms of the incorporated functional groups. Their properties in aqueous solutions were studied by viscometry and dynamic light scattering. The latter techniques revealed a complex dilute solution behavior of the novel block copolymers, resulting from the polyelectrolyte character of the functionalized PI block and showing a dependence on solution ionic strength and pH. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 606–613, 2006     

Linear pentablock quintopolymers (l‐SIDMV) with five incompatible blocks: Polystyrene,polyisoprene‐1,4, poly(dimethylsiloxane), poly(tert‐butyl methacrylate), and poly(2‐vinylpyridine)

Three linear pentablock quintopolymers (l‐SIDMV), where S is polystyrene (PS), I polyisoprene‐1,4 (PI), D poly(dimethylsiloxane) (PDMS), M poly(tert‐butyl methacrylate) (PtBuM), and V poly(2‐vinylpyridine) (P2VP), were synthesized by anionic polymerization high vacuum techniques. The approach involves the following: (a) The synthesis of living triblock terpolymer PS‐b‐PI‐b‐PDMSLi and diblock copolymer P2VP‐b‐PtBuMK by sequential polymerizations of the corresponding monomers with sec‐BuLi and benzyl potassium, respectively; and (b) The selective linking of the living triblock terpolymer with the chlorosilane group of 2‐(chloromethylphenyl)ethyldimethylchlorosilane (CMPDMS), followed by linking of the living block copolymer with the remaining chloromethyl group of CMPDMS. Molecular characterization carried out by size exclusion chromatography, membrane osmometry, solution (in CDCl₃ or d₈‐toluene) and solid‐state ¹H‐NMR spectroscopy indicated a high degree of molecular and compositional homogeneity. Differential scanning calorimetry results on the precursors and final polymers were discussed. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3938–3946, 2008     

Novel Nanostructured Electrodes Obtained by Pyrolysis of Composite Polymeric Materials

In this work, we compare pyrolyzed carbon derived from the photoresist SU‐8 alone or in combination with polystyrene and poly(styrene)‐block‐poly(dimethylsiloxane) copolymer (PS‐b‐PDMS), to be used as novel materials for micro‐ and nanoelectrodes. The pyrolyzed carbon films are evaluated with scanning electron microscopy, thermal gravimetric analysis, X‐ray photoelectron spectroscopy, contact angle analysis, and Raman spectroscopy. Furthermore, the standard rate constant for electron transfer is determined from cyclic voltammograms and found to be lower for PS‐b‐PDMS compared to PS and SU‐8 films. This may be related to the lower carbon content of PS‐b‐PDMS, as well as to its higher microstructural disorder.     

Synthesis of ABCD 4‐Miktoarm star‐shaped quarterpolymers by combination of the “click” chemistry with multiple polymerization mechanism

Well‐defined ABCD 4‐Miktoarm star‐shaped quarterpolymers of [poly(styrene)‐poly(tert‐butyl acrylate)‐poly(ethylene oxide)‐poly(isoprene)] [star(PS‐PtBA‐PEO‐PI)] were successfully synthesized by the combination of the “click” chemistry and multiple polymerization mechanism. First, the poly(styryl)lithium (PS^?Li⁺) and the poly(isoprene)lithium (PI^?Li⁺) were capped by ethoxyethyl glycidyl ether (EEGE) to form the PS and PI with both an active ω‐hydroxyl group and an ω′‐ethoxyethyl‐protected hydroxyl group, respectively. After these two hydroxyl groups were selectively modified to propargyl and 2‐bromoisobutyryl group for PS, the resulted PS was used as macroinitiator for ATRP of tBA monomer and the diblock copolymer PS‐b‐PtBA with a propargyl group at the junction point was achieved. Then, using the functionalized PI as macroinitiator for ROP of EO monomer and bromoethane as blocking agent, the diblock copolymer PI‐b‐PEO with a protected hydroxyl group at the conjunction point was synthesized. After the hydrolysis, the recovered hydroxyl group of PI‐b‐PEO was modified to bromoacetyl and then azide group successively. Finally, the “click” chemistry between them was proceeded smoothly. The obtained star‐shaped quarterpolymers and intermediates were characterized by ¹H NMR, FT‐IR, and SEC in detail. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2154–2166, 2008     

Synthesis of polybutadiene‐graft‐poly(dimethylsiloxane) and polyethylene‐graft‐poly(dimethylsiloxane) copolymers with hydrosilylation reactions

We report preliminary results for the synthesis of polyethylene‐graft‐poly(dimethylsiloxane) copolymers obtained by catalytic hydrogenation of polybutadiene‐graft‐poly(dimethylsiloxane) copolymers (PB‐g‐PDMS). These last copolymers were synthesized by hydrosilylation reactions between commercial polybutadiene and ω‐silane poly(dimethylsiloxane). The reaction was carried in solution catalyzed by cis‐dichloro bis(diethylsufide) platinum(II) salt. The PB‐g‐PDMS copolymers were analyzed by ¹H and ¹³C NMR spectroscopies, and the relative weight percentages of the grafted poly(dimethylsiloxane) macromonomer were determined from the integrated peak areas of the spectra. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2920–2930, 2004     

Polyimide polydimethylsiloxane triblock copolymers for thin film composite gas separation membranes

This article demonstrates the successful fabrication of thin‐film‐composite (TFC) membranes containing well‐defined soft‐hard‐soft triblock copolymers. Based on “hard” polyimide (PI) and “soft” polydimethylsiloxane (PDMS), these triblock copolymers (PDMS‐b‐PI‐b‐PDMS), were prepared via condensation polymerization, and end‐group allylic functionalization to prepare the polyimide component and subsequent “click” coupling with the soft azido functionalized PDMS component. The selective layer consisted of pure PDMS‐b‐PI‐b‐PDMS copolymers which were cast onto a precast crosslinked‐PDMS gutter layer which in turn was cast onto a porous polyacrylonitrile coated substrate. The TFC membranes' gas transport properties, primarily for the separation of carbon dioxide (CO₂) from nitrogen (N₂), were determined at 35 °C and at a feed pressure of 2 atm. The TFC membranes showed improvements in gas permselectivity with increasing PDMS weight fraction. These results demonstrate the ability for glassy, hard polymer components to be coated onto otherwise incompatible surfaces of highly permeable soft TFC substrates through covalent coupling. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3372–3382     

Well‐defined PE‐b‐PDMS diblock copolymers via the combination of thiol‐ene click and esterification reactions: Facile synthesis and compatibilization for HDPE/silicone oil blends

Well‐defined diblock copolymers of linear polyethylene (PE) and poly(dimethylsiloxane) (PDMS) have been synthesized through a facile route combining the thiol‐ene click chemistry of vinyl‐terminated polyethylene (PE‐ene) and the sequential esterification reaction. The resulting diblock copolymers are characterized by ¹H NMR, FT‐IR, DSC, TGA, and TEM. In addition, the PE‐b‐PDMS diblock copolymers have been evaluated as compatibilizers in the blends of high‐density polyethylene (HDPE) and silicone oil. The morphological analysis and mechanical properties demonstrate that the compatibilized blends with low loading concentration of PE‐b‐PDMS display significant improvements in modulus of elasticity and elongation at break as compared to the uncompatibilized binary blends. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3205–3212     

Preparation of poly(ethylene oxide)‐block‐poly(isoprene) by nitroxide‐mediated free radical polymerization from PEO macroinitiators

Amphiphilic poly(ethylene oxide)‐block‐poly(isoprene) (PEO‐b‐PI) diblock copolymers were prepared by nitroxide‐mediated polymerization of isoprene from alkoxyamine‐terminal poly(ethylene oxide) (PEO). PEO monomethyl ether (M_n ≈ 5200 g/mol) was functionalized by esterification with 2‐bromopropionyl bromide with subsequent copper‐mediated replacement of the terminal bromine with 2,2,5‐trimethyl‐4‐phenyl‐3‐azahexane‐3‐nitroxide. The resulting PEO‐alkoxyamine macroinitiator was used to initiate polymerization of isoprene in bulk and in solution at 125 °C to yield PEO‐b‐PI block copolymers with narrow molecular weight distributions (M_w/M_n ≤ 1.1). Polymerizations were first order in isoprene through 35% conversion. Micellar aggregates of PEO‐b‐PI in aqueous solution were crosslinked by treatment with a water‐soluble redox initiating system, and persistent micellar structures were observed in the dry state by AFM. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2977–2984, 2005     

Synthesis and characterization of model polybutadiene‐1,4‐b‐polydimethylsiloxane‐b‐polybutadiene‐1,4 copolymers

Model copolymers of poly(butadiene) (PB) and poly(dimethylsiloxane) (PDMS), PB‐b‐PDMS‐b‐PB, were synthesized by sequential anionic polymerization (high vacuum techniques) of 1,3‐butadiene and hexamethylciclotrisiloxane (D₃) on sec‐BuLi followed by chlorosilane‐coupling chemistry. The synthesized copolymers were characterized by nuclear magnetic resonance (¹H NMR), size‐exclusion chromatography (SEC), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). SEC and ¹H NMR results showed low polydispersity indexes (M_w/M_n) and variable siloxane compositions, whereas DSC and TGA experiments indicated that the thermal stability of the triblock copolymers depends on the PDMS composition. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2726–2733, 2007     

Synthesis of poly(dimethylsiloxane)‐containing diblock and triblock copolymers by the combination of anionic ring‐opening polymerization of hexamethylcyclotrisiloxane and nitroxide‐mediated radical polymerization of methyl acrylate,isoprene, and styrene

Poly(dimethylsiloxane)‐containing diblock and triblock copolymers were prepared by the combination of anionic ring‐opening polymerization (AROP) of hexamethylcyclotrisiloxane (D₃) and nitroxide‐mediated radical polymerization (NMRP) of methyl acrylate (MA), isoprene (IP), and styrene (St). The first step was the preparation of a TIPNO‐based alkoxyamine carrying a 4‐bromophenyl group. The alkoxyamine was then treated with Li powder in ether, and AROP of D₃ was carried out using the resulting lithiophenyl alkoxyamine at room temperature, giving functional poly(D₃) with M_w/M_n of 1.09–1.16. NMRPs of MA, St, and IP from the poly(D₃) at 120 °C gave poly(D₃‐b‐MA), poly(D₃‐b‐St), and poly(D₃‐b‐IP) diblock copolymers, and subsequent NMRPs of St from poly(D₃‐b‐MA) and poly(D₃‐b‐IP) at 120 °C gave poly(D₃‐b‐MA‐b‐St) and poly(D₃‐b‐IP‐b‐St) triblock copolymers. The poly(dimethylsiloxane)‐containing diblock and triblock copolymers were analyzed by ¹H NMR and size exclusion chromatography. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6153–6165, 2005     

Synthesis,characterization and self‐assembly of well‐defined linear heptablock quaterpolymers

Two well‐defined heptablock quaterpolymers of the ABCDCBA type [Α: polystyrene (PS), B: poly(butadiene) with ～90% 1,4‐microstructure (PB_1,4), C: poly(isoprene) with ～55% 3,4‐microstructure (PI_3,4) and D: poly(dimethylsiloxane) (PDMS)] were synthesized by combining anionic polymerization high vacuum techniques and hydrosilylation/chlorosilane chemistry. All intermediates and final products were characterized by size exclusion chromatography, membrane osmometry, and proton nuclear magnetic resonance spectroscopy. Fourier transform infrared spectroscopy was used to further verify the chemical modification reaction of the difunctional PDMS. The self‐assembly in bulk of these novel heptablock quarterpolymers, studied by transmission electron microscopy and small angle X‐ray scattering, revealed 3‐phase 4‐layer alternating lamellae morphology of PS, PB_1,4, and mixed PI_3,4/PDMS domains. Differential scanning calorimetry was used to further confirm the miscibility of PI_3,4 and PDMS blocks. It is the first time that PDMS is the central segment in such multiblock polymers (≥3 chemically different blocks). © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1443–1449     

Crosslinked PDMS elastomers and coatings from the thermal curing of vinyl‐functionalized PDMS and a diazide aliphatic crosslinker

The crosslinking of poly(dimethylsiloxane) elastomers and coatings by the thermal curing of poly(dimethylsiloxane‐co‐methylvinylsiloxane) and 1,12‐diazido‐dodecane was studied. This crosslinking pathway relies on the cycloaddition of azides and alkenes as well as the thermal generation of nitrene transient radicals, which react with alkenes, yielding respectively 1,2,3‐triazoline and aziridine crosslinking knots. The influence of temperature and the ratio of azide and vinyl functionalities has been investigated by rheological, swelling, and insoluble fraction measurements for materials crosslinked in bulk and by comparison of the thickness before and after extraction of the soluble materials by soxhlet extraction for the crosslinked coatings. The preparation of highly crosslinked PDMS‐based elastomers and coatings has been demonstrated, even if the fraction of elastically effective crosslinks in bulk remained below 160 mol/m³. Advantageously, this system does not require additional initiator or catalyst, is not sensitive to moisture or oxygen, and can be extended to a wide range of unsaturated polymers as well as different organic or inorganic solid substrates. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Polymerization of n‐hexyl isocyanate with CpTiCl2(OR) (R = functional group or macromolecular chain): A route to ω‐functionalized and block copolymers and terpolymers of n‐hexyl isocyanate

Well‐defined ω‐cholesteryl poly(n‐hexyl isocyanate) (PHIC–Chol), as well as diblock copolymers of n‐hexyl isocyanate (HIC) with styrene, PS‐b‐PHIC [PS = polystyrene; PHIC = poly(n‐hexyl isocyanate)], and triblock terpolymers with styrene and isoprene, PS‐b‐PI‐b‐PHIC and PI‐b‐PS‐b‐PHIC (PI = polyisoprene), were synthesized with CpTiCl₂(OR) (R = cholesteryl group, PS, or PS‐b‐PI) complexes. The synthetic strategy involved the reaction of the precursor complex CpTiCl₃ with cholesterol or the suitable ω‐hydroxy homopolymer or block copolymer, followed by the polymerization of HIC. The ω‐hydroxy polymers were prepared by the anionic polymerization of the corresponding monomers and the reaction of the living chains with ethylene oxide. The reaction sequence was monitored by size exclusion chromatography, and the final products were characterized by size exclusion chromatography (light scattering and refractive‐index detectors), nuclear magnetic resonance spectroscopy, and, in the case of PHIC–Chol, differential scanning calorimetry. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6503–6514, 2005     

Synthesis and morphology of model PS‐b‐PDMS copolymers

True model linear poly(styrene‐b‐dimethylsiloxane) PS‐b‐PDMS copolymers were synthesized by using sequential addition of monomers and anionic polymerization (high‐vacuum techniques), employing the most recent experimental procedures that allow the controlled polymerization of each monomer to obtain blocks with controlled molar masses. The model diblock copolymers obtained were analyzed by using different techniques, such as size‐exclusion chromatography, ¹H NMR, Fourier transform infrared spectroscopy, small angle X‐rays scattering (SAXS), and wide angle X‐rays scattering (WAXS). The PS‐b‐PDMS copolymers obtained showed narrow molar mass distribution and variable PDMS content, ranging from 2 up to 55 wt %. Compacted powder samples were investigated by SAXS to reveal their structure and morphology changes on thermal treatment in the interval from 30 to 200 °C. The sample with the highest PDMS content exhibits a lamellar morphology, whereas two other samples show hexagonally packed cylinders of PDMS in a PS matrix. For the lowest PDMS content samples, the SAXS pattern corresponds to a disordered morphology and did not show any changes on thermal treatment. Detailed information about the morphology of scattering domains was obtained by fitting the SAXS scattering curves. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3119–3127, 2010     

Synthesis and characterization of semicrystalline triblockcopolymers of isotactic polystyrene and polydimethylsiloxane

iPS‐b‐PDMS‐b‐iPS triblock copolymers were prepared by hydrosilylation of vinyl‐terminated isotactic polystyrenes (iPS) with α,ω‐bis(dimethylsilane)‐terminated poly(dimethylsiloxane)s (PDMS). As a function of the molecular weights of the two components, the triblock copolymer composition was varied between 9.0 and 98 wt % iPS. The resulting triblock copolymers remained soluble during block copolymer synthesis due to slow iPS crystallization in solution. At iPS content exceeding 31 wt %, the iPS crystallization was achieved by postpolymerization annealing and melt processing. The triblock copolymers melted above 200 °C with melting temperatures very similar to those of the corresponding iPS homopolymers. Nanostructure and microstructure formation of both amorphous and semicrystalline triblock copolymers were examined by means of light microscopy, atomic force microscopy, and TEM measurements. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

β‐Lactam functionalized poly(isoprene‐b‐ethylene oxide) amphiphilic block copolymers

Amphiphilic block copolymers containing β‐lactam groups on the polyisoprene block were synthesized from poly(isoprene‐b‐ethylene oxide) (IEO) diblock copolymer precursors, prepared by anionic polymerization. β‐Lactam functionalization was achieved via reaction of the polyisoprene (PI) block with chlorosulfonyl isocyanate and subsequent reduction. The resulting block copolymers were molecularly characterized by SEC, FTIR, and NMR spectroscopies and DSC. Functionalization was found to proceed in high yields, altering the solubility properties of the PI block and those of the functionalized diblocks. Hydrogen bond formation is assumed to be responsible for the decreased crystallinity of the poly(ethylene oxide) block (PEO) in the bulk state as indicated by DSC measurements. The self‐assembly behavior of the β‐lactam functionalized poly(isoprene‐b‐ethylene oxide) copolymers (LIEO) in aqueous solutions was studied by dynamic light scattering (DLS), static light scattering (SLS), fluorescence spectroscopy, and atomic force microscopy (AFM). Nearly spherical loose aggregates were formed by the LIEO block copolymers, having lower aggregation numbers and higher cmc values compared to the IEO precursors, as a result of the increased polarity of the β‐lactam rings incorporated in the PI blocks. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 24–33, 2010     

Ring-opening polymerization of l-lactide in supercritical carbon dioxide using PDMS based stabilizers

Ring-opening suspension polymerization of l-lactide in supercritical CO₂ (scCO₂) was investigated in the presence of different stabilizer architectures based on poly(dimethyl siloxanes) (PDMS). Two amphiphilic AB type block copolymers, a graft copolymer, and an ester-capped PDMS were selected to find their efficacy as stabilizers for the synthesis of poly(l-lactide) (PLLA) in scCO₂. The stabilizer’s efficiency was analyzed in terms of the molecular weight, yield, and particle morphology of PLLA. The block copolymers, poly(dimethylsiloxane)-b-poly(acrylic acid) (PDMS-b-PAA) and poly(dimethylsiloxane)-b-poly(methacrylic acid) (PDMS-b-PMA) were found to be effective, leading to the formation of fine, discrete PLLA microparticles. On the other hand, the graft copolymer, poly(dimethylsiloxane-g-pyrrolidonecarboxylic acid) (PDMS-g-PCA) and acetylated PDMS (PDMS-OAc) failed to give an enough stabilization to the PLLA due to their short polymer-philic chains, resulting in hard agglomerates.