Properties of Nylon‐6/Na+‐Montmorillonite Nanocomposites Obtained by Hydrolyzed Ring‐Opening Polymerization

Summary: Nylon‐6/Na⁺‐montmorillonite (MMT) nanocomposites (NNNs) are synthesized by a hydrolyzed ring‐opening polymerization. At a loading of only 2 wt.‐% MMT, the tensile modulus, the flexural modulus, and the heat distortion temperature of the NNNs exhibit increases of nearly 20%, 60%, and 63 °C, respectively. Compared with that of neat nylon‐6, the temperature of the main α‐relaxation (T_α) of the NNNs is shifted 3.6 °C toward higher temperatures and two β‐relaxation peaks are observed. Another interesting phenomenon is that there is a new melting peak (at about 206 °C) for the NNNs.

DSC second heating curves of neat nylon‐6 (N6), nylon‐6/Na⁺‐MMT nanocomposites with highly swollen Na⁺‐MMT (NHM), and nylon‐6/Na⁺‐MMT nanocomposites with slightly swollen Na⁺‐MMT (NSM) with various amounts of Na⁺‐MMT.     

High‐Temperature Crystalline Phases in Nylon 6/Clay Nanocomposites

Summary: Nylon 6/clay nanocomposites (N6CN) with different cooling histories were investigated by differential scanning calorimetry (DSC) and variable‐temperature X‐ray diffraction (XRD). Above the melting temperature, new endothermic peaks appeared in the DSC trace for N6CN. All the neat nylon 6 samples presented amorphous XRD patterns when heated up to the melting range. However, for N6CN samples, undefined crystalline structures remained in the substantially molten polymer matrix up to 300 °C.

XRD patterns of a quenched nylon 6 sample annealed at 210 °C and N6CN samples annealed at 210, 230, and 300 °C, respectively.     

Copolymerization of Ethylene and 10‐Undecen‐1‐ol using a Montmorillonite‐Intercalated Metallocene Catalyst: Synthesis of Polyethylene/Montmorillonite Nanocomposites with Enhanced Structural Stability

Summary: Ethylene and 10‐undecen‐1‐ol have been successfully copolymerized by an organically modified montmorillonite (OMMT)‐intercalated metallocene catalyst, Et[Ind]₂ZrCl₂, activated by methylaluminoxane (MAO). The obtained hydroxy‐functionalized polyethylene (PE‐OH)/OMMT nanocomposites exhibit enhanced structural stability as compared with the neat PE‐based ones, with no significant collapse of the nanocomposite structure being detected by WAXD examination after high‐temperature processing. The simultaneous polyolefin functionalization provides an effective and convenient solution to stabilize the PE/MMT nanocomposite structure formed by in‐situ polymerization.

     

3‐Ethylated N‐Vinyl‐2‐pyrrolidone with LCST Properties in Water

The monomer 3‐ethyl‐1‐vinyl‐2‐pyrrolidone ( 3 ) and the homopolymer poly(3‐ethyl‐1‐vinyl‐2‐pyrrolidone) ( 5 ) have been synthesized. Polymer 5 is soluble in water and shows a critical temperature (T_c) of 27 °C. The presence of cyclodextrin causes a slight shift of the T_c. The lower critical solution temperature (LCST) could be varied between 27 and 40 °C by copolymerization with N‐vinyl‐2‐pyrrolidone. A linear correlation between the T_c and the copolymer composition is observed.

     

RAFT‐Polymerization of Styrene up to High Pressure: Rate Enhancement and Improved Control

Summary: Application of high pressure, up to 2 500 bar, in cumyl dithiobenzoate‐mediated styrene reversible addition fragmentation chain transfer (RAFT) polymerizations was found to be extremely advantageous with respect to both rate and control of polymerization. The overall rate of polymerization could be increased by a factor of approximately 3 with, e.g., at 23% conversion, concomitantly reducing the polydispersity indices from 1.35 to 1.10. No significant effect of increased pressure on the rate retardation effect was found.

SEC curves of polystyrene samples with identical peak molecular weights, generated by CDB‐mediated styrene bulk polymerization at 70 °C at 1 and at 2 000 bar.     

Water Plasticizes Only a Small Part of the Amorphous Phase in Nylon‐6

It is known that Polyamide 6 absorbs water in its amorphous phase. The exact composition of the amorphous phase will determine the uptake process. The heterogeneity in the amorphous phase with respect to plasticization by water uptake is quantified in this paper using NMR relaxometry. It is shown that water occupies and plasticizes only a small part (∼6%) of the nylon matrix. This part is located in between the crystalline domains where polymer chain mobility is higher. At low moisture content (<4%) water molecules are tightly bound to the polymer and have the same dynamics. A highly mobile pool of guest‐hydrogen nuclei is detected starting at a moisture content of 4%. Here, water is absorbed in clusters and the interaction between the polymer chains and water molecules decreases, leading to decoupling of the dynamics of water and polymer.

     

Dielectric Properties of Polyimide‐Mica Hybrid Films

Summary: Polyimide‐mica hybrid films were prepared via ultrasonic dispersion and in situ polymerization process from a solution of a polyimide precursor and mica in N,N‐dimethylacetamide, and their structure was characterized by FTIR and XRD techniques. The dependence of dielectric properties, such as dielectric constant and electrical breakdown strength, of the hybrid films on the content of mica was studied at room and cryogenic temperatures. The results show that the dielectric constant of PI‐mica hybrid films decreases with the increase of the mica content at temperatures from −150 to 150 °C and at frequency range from 1 kHz to 1 MHz. It was found that the cryogenic electrical breakdown strength of the PI‐mica hybrid films could meet the requirements of cryogenic insulating materials.

Effect of frequency on the dielectric constant of PI‐mica hybrid films at 140 °C at the frequency from 1 kHz to 1 MHz.     

Uracil as Nucleating Agent for Bacterial Poly[(3‐Hydroxybutyrate)‐co‐(3‐hydroxyhexanoate)] Copolymers

In this study, uracil has been introduced as the nucleating agent (NA) for bacterially synthesized poly[(3‐hydroxybutyrate)‐co‐(3‐hydroxyhexanoate)] (PHBHHx) copolymers with HHx content of 5, 10, 18 mol‐%, and poly(3‐hydroxybutyrate) (PHB) homopolymer for the first time. Its effect was compared with the conventional NA of PHB, that is, boron nitride (BN), and two other naturally occurring pyrimidine derivatives, i.e., thymine and cytosine. The effects of uracil on the crystallization kinetics, melting behavior, spherulite morphology, and crystalline structure of PHBHHx and PHB were investigated by differential scanning calorimetry (DSC), polarized optical microscopy (POM), and wide‐angle X‐ray diffraction (WAXD). Uracil and BN exhibit the comparable nucleation efficiency on the crystallization of PHB, whereas uracil shows much more effective nucleation ability than BN for PHBHHx copolymers. With incorporation of 1 wt.‐% uracil, PHBHHx with 0–10 mol‐% HHx units can finish crystallization upon cooling at 10 °C · min^?1. The crystallization half‐times (t_1/2) of all the PHB and PHBHHx samples decrease significantly with presence of uracil. The crystallization rate of polymers further enhances with increase in uracil concentration. With addition of 1 wt.‐% uracil, the t_1/2 value of PHBHHx with 10 mol‐% HHx units melt‐crystallizing at 80 °C decreases to ≈4.0% of the neat polymer, and the nucleation density increases by 3–4 orders of magnitude. The incorporation of uracil has no discernable effect on the crystalline structure of PHBHHx, as evidenced by WAXD results. It was proposed that the nucleation mechanism of the uracil/PHBHHx (or PHB) system might be the epitaxial nucleation.

     

Dual Self‐Assembling Polycondensation of p‐Acetoxybenzoic Acid and p‐Acetamidobenzoic Acid

The dual self‐assembling polycondensation of p‐acetoxybenzoic acid (ABA) and p‐acetamidobenzoic acid in Therm S 800 was examined at 300 °C. Needle‐like crystals and lath‐like crystals were formed simultaneously through reaction‐induced crystallization of oligomers at a molar ratio of 30–50 mol‐% ABA in the feed. The needle‐like crystals comprised more p‐oxybenzoyl units, whereas the lath‐like ones contained higher amounts of p‐benzamide moieties.

     

A New Chemo‐Enzymatic Route to Side‐Chain Liquid‐Crystalline Polymers: The Synthesis and Polymerization of 6‐(4‐Methoxybiphenyl‐4′‐oxy)hexyl Vinyl Hexanedioate

A novel synthetic method combining chemo and enzymatic synthesis strategies was employed to prepare a vinyl acetate type monomer, 6‐(4‐methoxybiphenyl‐4′‐oxy)hexyl vinyl hexanedioate (VA‐LC). Homo‐ and copolymers of VA‐LC with maleic anhydride (MAn) were prepared by conventional free radical polymerization using 2,2′‐azobisisobutyronitrile (AIBN) and 1,1′‐azobis (cyclohexane carbonitrile) (AHCN) as an initiator at 95 and 60 °C, respectively. The thermal properties of the generated polymeric material were investigated by differential scanning calorimetry (DSC), and the optical texture was inspected by polarizing optical microscopy (POM). While the monomer VA‐LC does not exhibit liquid‐crystalline properties, poly(VA‐LC), and the alternating copolymer of VA‐LC with maleic anhydride both displayed such properties.

     

A New Crystal Form,Polymorphism, and Multi‐Morphology in Biodegradable Poly(3‐hydroxypropionate)

Summary: A new crystal morphology (δ form) of poly(3‐hydroxypropionate) (PHP) is found in cast and melt‐crystallized PHPs with low molecular weight, in which the PHP chains possibly adopt a 2₁ helix rather than the trans conformation found in the β or γ form. The fusion temperature‐ and the crystallization temperature‐dependent polymorphism are responsible for the dual morphologies and the unique growth kinetics of spherulites in the melt‐crystallized PHPs.

a) A dual‐morphology developed at 70 °C in PHP films after melting at 117 °C and b) that formed during cooling at a rate of 1 °C · min⁻¹ from 130 °C.     

Single‐Mode Microwave Ovens as New Reaction Devices: Accelerating the Living Polymerization of 2‐Ethyl‐2‐Oxazoline

Summary: The ring‐opening cationic polymerization of 2‐ethyl‐2‐oxazoline was performed in a single‐mode microwave reactor as the first example of a microwave‐assisted living polymerization. The observed increase in reaction rates by a factor of 350 (6 h → 1 min) in the range from 80 to 190 °C could be attributed solely to a temperature effect as was clearly shown by control experiments and the determined activation energy. Because of the homogenous microwave irradiation, the polymerization could be performed in bulk or with drastically reduced solvent ratios (green chemistry).

Monomer conversion, represented by the ratio ln{[M₀]/[M_t]}, plotted against time for six temperatures in the range from 80 to 180 °C, and polymerization reaction vials, showing an increase in yellow color for those reactions performed (well) above and below 140 °C, indicating side reactions.     

Polymorphism in nylon‐11/montmorillonite nanocomposite

The polymorphism behavior in nylon‐11/montmorillonite (MMT) nanocomposite was investigated by wide‐angle X‐ray diffraction (WAXD) and variable‐temperature infrared spectroscopy. The results of WAXD and IR confirmed the presence of the γ‐crystalline form of nylon‐11, which is induced and stabilized by MMT. However, the hydrogen bond in the nanocomposite and its temperature dependence also exhibited some differences from neat nylon‐11. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 253–259, 2004     

Amine‐Reactive PEGylated Nanoparticles for Potential Bioconjugation

Water‐dispersible PEGylated nanoparticles (NPs) presenting amine‐reactive conjugation sites at their surfaces were synthesized and their ability to react with amines was demonstrated. An amphiphilic block copolymer bearing an N‐succinimidyl ester at its water‐soluble end was synthesized by the consecutive controlled radical polymerization of poly(ethylene glycol) methacrylate and styrene from a functional halide initiator. After purification of the copolymer, NPs of approximately 40 nm were obtained by a self‐assembly process in water. The reactivity of the NPs was evidenced by reacting them with primary amines, including a fluorescent dye. The activated ester remained stable throughout all synthetic steps and a nearly quantitative coupling efficiency was obtained.

     

Crystal Transition of Nylon‐12,12 under Drawing and Annealing

Summary: Wide‐angle X‐ray diffraction (WAXD) was used to investigate the crystal transition of nylon‐12,12 under annealing and drawing. The triclinic α‐form could be obtained by crystallizing from a melted state or by annealing the γ‐form at high temperature (above 150 °C). The crystal structure of the α‐form annealed at 90 °C didn't change with time except for the perfection of crystals and an increase in the degree of crystallinity. The pseudo‐hexagonal γ‐form could be produced by crystallizing from the melted state at low temperature (90 °C) or by drawing at 90 and 160 °C. This is the first time a Brill transition has been observed under drawing conditions, instead of under the traditional conditions of continuous heating and cooling. Experimental results also confirm that drawing inducement is preferable to produce the γ‐form and plays an important role in determining the crystal structure; there is a competition between drawing inducement and thermal inducement.

The WAXD patterns of the nylon‐12,12 α‐form drawn different drawing ratios at 90 °C.     

pH‐Responsive PEG‐Poly(β‐amino ester) Block Copolymer Micelles with a Sharp Transition

Summary: A pH‐sensitive block copolymer is synthesized by step polymerization and its pH‐sensitive micellization‐demicellization behavior is studied. This polymer has a hydrophilic MPEG (shell) and hydrophobic but pH‐sensitive poly(β‐amino ester) (core), which can form a self‐assembled micelle. As confirmed by fluorescence spectroscopy and dynamic light scattering (DLS), this polymer shows a sharp pH‐sensitive micellization‐demicellization behavior. It is confirmed that the pH sensitivity is affected by the molecular weight ratio between the MPEG and poly(β‐amino ester).

Plots of the intensity ratio I₃₃₇/I₃₃₄ (from pyrene excitation spectra): a) vs. pH for copolymer samples and b) vs. log (concentration) for M1.     

Living Polymerization of N,N‐Diphenylacrylamide with Triisobutylaluminum

Summary: N,N‐Diphenylacrylamide was polymerized in a living fashion with triisobutylaluminum in THF at 0 °C. The polymerization results showed an increase of molecular weight proportional to the amount of monomer consumed and a first‐order kinetics at −78 °C. The intermediates obtained with excess initiator at −78 °C revealed that the polymerization was initiated through 1,4‐addition of hydride from a triisobutyl group in the triisobutylaluminum and then proceeded through aluminum‐oxygen bond interchange.

N,N‐Diphenylacrylamide was polymerized in a living fashion with triisobutylaluminum in THF at 0 °C.     

Low‐Cost,Thermoresponsive Wettability of Surfaces: Poly(N‐isopropylacrylamide)/Polystyrene Composite Films Prepared by Electrospinning

Low‐cost, responsive poly(N‐isopropylacrylamide)/polystyrene composite films were prepared by a facile electrospinning technique. The surface structures and wettabilities of the composite films are tunable by simply controlling the concentration of polymer. With a proper proportion of each polymer, the wettability of the surface can be switched between superhydrophilicity and superhydrophobicity when the temperature is changed from 20 °C to 50 °C. The combination of a stimuli‐responsive polymer with micro/nanostructures on the surface of the composite film contributes to this unique surface property.

     

A New Type of Thermoresponsive Copolymer with UCST‐Type Transitions in Water: Poly(N‐vinylimidazole‐co‐1‐vinyl‐2‐(hydroxymethyl)imidazole)

1‐Vinyl‐2‐(hydroxymethyl)imidazole ( 2 ) is synthesized by a procedure described in the literature. Corresponding copolymers with upper critical solution temperature (UCST)‐type transitions in water and high‐glass transition temperatures (T_g) are prepared by free radical copolymerization with N‐vinylimidazole ( 1 ). Depending on the copolymer composition, the cloud point can be varied between 19 and 41 °C. As the copolymer composition is identical with the monomer feed ratio, the cloud point can be easily tuned in the desired range. Furthermore, a distinctive pH‐dependence and salt effect can be observed.

     

Encapsulation of Bovine Serum Albumin in Temperature‐Programmed “Shell‐in‐Shell” Structures

A novel approach to load a hydrophilic bovine serum albumin into drug carriers was proposed in terms of temperature‐programmed “shell‐in‐shell” structures, which were fabricated with poly(N‐isopropylacrylamide), poly(lactide), poly(ethylene glycol), and Au nanoparticles. Spherically well‐defined “shell‐in‐shell” structures were constructed by a modified‐double‐emulsion method (MDEM). The lower critical solubility temperature of the structures was manipulated to 36.4 °C which was confirmed by UV/Vis spectroscopy and DSC (Differential Scanning Calorimetry).

TEM image of the Au@PLLA‐PEG@PNIPAAm‐PDLA structure.