Atomic and electronic structure of steps and kinks on MgO(100) and MgO(110)

The electronic and atomic structure of vicinal MgO surfaces are studied using a quantum self-consistent method associated with a geometry optimization code. 10n, (n + 1)0n and n1n surfaces, with periodic monoatomic steps separating {001} or {101} terraces, are considered. Diatomic steps along the {10n} orientation and periodic kinks on the {3 1 10} surface are also modelled. We assign most electronic peculiarities of stepped surfaces to the values of the Madelung potential acting on the under-coordinated atoms, which is a function of their first and second coordination numbers. An analytical model is proposed to explain the bond contractions around these atoms. Finally the microscopic contributions to the step energy are discussed, together with the strength of the step interaction as a function of their separation.     

Charge distribution of a potassium-doped combined system of graphene and hexagonal boron nitride

By using first-principles density functional theory, we investigate the charge distribution of a potassium-doped layered combined system of graphene and hexagonal boron nitride. Two configurations of potassium-doped hexagonal boron nitride layers on graphenes and the reverse geometry of graphenes on hexagonal boron nitride layers are considered. We find that the charge distribution exhibits different features in these two situations. In the former case, the outmost hexagonal boron nitride layer cannot screen the external charges offered by potassium atom completely and most of the transferred charges reside on the two bounding layers. In contrary, the outmost graphene layer near the potassium atom can accept almost all of the transferred charges and only a few of them stay at interior layers in the latter case. A more amazing result is that the characteristics of charge transfer are independent of the number of hexagonal boron nitride layers and graphenes.     

Theoretical investigation of van der Waals forces between solid surfaces at nanoscales

A theoretical investigation of van der Waals forces acting between two solid silicon surfaces at separations from zero to approximately 20 nm is presented. We focused our efforts on the analysis of different factors that can cause deviations from the classical pressure–distance dependence p  1/D³. It is demonstrated that a layer (oxide or water) at any of the surfaces influences the pressure up to distances, which are an order of magnitude larger than its own thickness. A jump on the p(D) curve is expected at contact of the adsorbed liquid layers. The retardation of van der Waals forces at 5 < D < 20 nm has the similar effect on the pressure as 1 nm oxide layers. At the far end of this range the pressure decreases by 30% due to the retardation. Nanoscale roughness plays a great role when the surfaces are close-to-contact, the crucial factor is the height distribution of asperities. However, their curvature and surface density are also important, as well as the amount of adsorbed water.     

B$lt;sub$gt;$lt;i$gt;n$lt;/i$gt;$lt;/sub$gt;($lt;i$gt;n$lt;/i$gt;=2—15)团簇的几何结构和电子性质

应用密度泛函理论中的B3LYP方法计算并分析了不同生长模式下B_n（n=2—15）团簇的几何结构及电子性质. 同时,比较和讨论了不同生长模式下硼团簇的原子束缚能、能级间隙和第一电离势. 研究表明：直线构型稳定性最低,金属性较强,尤其在n=8时能隙仅有0.061 eV,说明该团簇已具有金属特征. 平面或准平面构型稳定性最高,非金属性强. 立体构型的稳定性与金属性介于直线和平面构型之间. 另外,还讨论了基态团簇的束缚能、能量二阶差分、能级间隙和第一电离势随团簇尺寸的变化,结果表明B₁₂与B₁₄是幻数团簇. 关键词： n团簇')" href="#">B_n团簇 密度泛函理论 几何结构 电子性质     

Atomic structures on faceted W(111) surfaces induced by ultrathin films of Pd

The faceting of Pd/W(111) surfaces has been studied using a Scanning tunneling microscope (STM). Three-sided pyramidal facets having {211} faces with dimensions ranging from 3 to 15 nm can be induced by ultrathin Pd films (≥ 1 monolayer), upon annealing to 700 K or higher. From atomic-resolution STM-images of these surfaces, we obtain direct confirmation of the {211} structure on individual facets of the 3-sided pyramids. In addition, the atomic structure of the facet edges indicates that edge energy may play a role in faceting. When the as-deposited coverage of Pd is greater than the critical value ( 1 monolayer) for inducing faceting, the extra Pd atoms diffuse to form 3-dimensional clusters, some with discernible crystalline structures, upon annealing.     

Pulsed laser deposition of hexagonal and cubic boron nitride films

Hexagonal and cubic boron nitride films are deposited by pulsed laser ablation from a boron nitride and a boron target using a KrF excimer laser. Hexagonal films are deposited in nitrogen as background gas or with nitrogen/argon ion bombardment at ion-to-arriving-target-atom (I/A) ratios at the substrate below 0.5. Nucleation of the cubic phase takes place exclusively with ion bombardment at I/A ratios above 1.0, which may be reduced down to 0.6 after the completion of the nucleation process. The influence of the parameters of the laser and ion beams on the properties of the hexagonal films are presented. The Vickers microhardness and the intrinsic stress of those films vary in wide ranges of 5 to 25 GPa and 1 to 16 GPa, respectively. Pulsed laser deposited hexagonal boron nitride films show good adhesion to silicon and stainless steel if they are deposited at I/A ratios below 0.5, and can be used as intermediate layers for improving the adhesion of cubic boron nitride films. So far, 0.5 7m thick, nearly phase-pure cubic boron nitride films with good adhesion have been deposited. The microstructural, mechanical, and optical properties of those layer systems are presented and discussed.     

Vicinal and on-axis surfaces of 6H-SiC(0001) thin films observed by scanning tunneling microscopy

Surfaces of 6H-SiC(0001) homoepitaxial layers deposited on vicinal (3.5° off (0001) towards [11 0]) and on-axis 6H---SiC wafers by chemical vapour deposition have been investigated using ultra-high vacuum scanning tunneling microscopy. Undulating step configurations were observed on both the on-axis and the vicinal surfaces. The former surface possessed wider terraces than the latter. Step heights on both surfaces were 0.25 nm corresponding to single bilayers containing one Si and one C layer. After annealing at T>1100°C for 3–5 min in UHV, selected terraces contained honeycomb-like regions caused by the transformation to a graphitic surface as a result of Si sublimation. A model of the observed step configuration has been proposed based on the observation of the [ 110] or [1 10] orientations of the steps and energetic considerations. Additional deposition of very thin (2 nm) SiC films on the above samples by gas source molecular beam epitaxy was performed to observe the evolution of the surface structure. Step bunching and growth of 6H---SiC layers and formation of 3C---SiC islands were observed on the vicinal and the on-axis surfaces, respectively, and controlled by the diffusion lengths of the adatoms.     

Fabrication of particular structures of hexagonal boron nitride and boron–carbon–nitrogen layers by anisotropic etching

Anisotropic etching of hexagonal boron nitride (h-BN) and boron–carbon–nitrogen (BCN) basal plane can be an exciting platform to develop well-defined structures with interesting properties. Here, we developed an etching process of atomically thin h-BN and BCN layers to fabricate nanoribbons (NRs) and other distinct structures by annealing in H₂ and Ar gas mixture. BCN and h-BN films are grown on Cu foil by chemical vapor deposition (CVD) using solid camphor and ammonia borane as carbon, nitrogen and boron source, respectively. Formation of micron size well-defined etched holes and NRs are obtained in both h-BN and BCN layers by the post growth annealing process. The etching process of h-BN and BCN basal plane to fabricate NRs and other structures with pronounced edges can open up new possibilities in 2D hybrid materials.     

高温高压下立方氮化硼和六方氮化硼的结构、力学、热力学、电学以及光学性质的第一性原理研究

本文采用基于密度泛函理论的第一性原理平面波赝势和局域密度近似方法,优化了立方和六方氮化硼的几何结构,系统地研究了零温高压下立方和六方氮化硼的几何结构、力学、电学以及光学性质.结构与力学性质研究表明:立方氮化硼的结构更加稳定,两种结构的氮化硼均表现出一定的脆性,而六方氮化硼的热稳定性则相对较差;电学性质研究表明:立方氮化硼和六方氮化硼均为间接带隙半导体,且立方氮化硼比六方氮化硼局域性更强;光学性质结果显示:立方氮化硼和六方氮化硼对入射光的通过性都很好,在高能区立方氮化硼对入射光的表现更加敏感.此外,还研究了高温高压下立方氮化硼的热力学性质,并得到其热膨胀系数、热容、德拜温度和格林艾森系数随温度和压力的变化关系.本文的理论研究阐述了高压下立方氮化硼和六方氮化硼的相关性质,为今后的实验研究提供了比较可靠的理论依据.     

Formation of AlxGa1−xAs periodic array of micro-hexagonal pillars and air holes by selective area MOVPE

A two-dimensional (2D) periodic array having air/semiconductor interfaces can be applied to photonic crystals (PCs), which are expected to control spontaneous emission and optical transports in the next-generation devices. In this paper, we report on the selective area metal-organic vapor phase epitaxial (SA-MOVPE) growth of a Al_xGa_1−xAs 2D periodic array on a GaAs (1 1 1)B substrate for application to 2DPCs having GaAs/AlGaAs heterostructures. Al_xGa_1−xAs (x=0, 0.25 and 0.50) growth was carried out on triangular lattice array of hexagonal GaAs openings and hexagonal SiN_x masks. A uniform Al_0.50Ga_0.50As hexagonal pillar array and a GaAs hexagonal air-hole array with a 1 μm-period were successfully obtained. The important growth parameter for uniform 2DPC structure formation by SA-MOVPE was clarified. Furthermore, we describe the successful demonstration of a 400 nm-period pillar array and an air-hole array, which corresponds to the optical communication wavelength λ=1.3–1.55 μm. The results indicate that SA-MOVPE method is very promising for the formation of uniform semiconductor 2DPCs without the occurrence of process-induced damages.     

First-principles calculations of BC4N nanostructures: stability and electronic structure

In this work, we apply first-principles methods to investigate the stability and electronic structure of BC₄N nanostructures which were constructed from hexagonal graphite layers where substitutional nitrogen and boron atoms are placed at specific sites. These layers were rolled up to form zigzag and armchair nanotubes, with diameters varying from 7 to 12 Å, or cut and bent to form nanocones, with 60^° and 120^° disclination angles. The calculation results indicate that the most stable structures are the ones which maximize the number of B–N and C–C bonds. It is found that the zigzag nanotubes are more stable than the armchair ones, where the strain energy decreases with increasing tube diameter D, following a 1/D ² law. The results show that the 60^° disclination nanocones are the most stable ones. Additionally, the calculated electronic properties indicate a semiconducting behavior for all calculated structures, which is intermediate to the typical behaviors found for hexagonal boron nitride and graphene.     

Growth and thermal properties of ultrathin cerium oxide layers on Rh(1 1 1)

Ultrathin layers of cerium oxide have been deposited on a Rh(1 1 1) surface and their growth morphology, structure, and thermal stability have been investigated by LEED, STM, XPS, and valence band resonant photoemission. STM and LEED indicate that the ceria grows epitaxially in form of ordered CeO₂ islands at elevated substrate temperature (250–300 °C), with (1 1 1) faces parallel and orientationally aligned to the main azimuthal directions of the substrate. The ultrathin ceria films contain significant amounts of reduced Ce³⁺ species, which appear to be located predominantly at the ceria–Rh interface. For thicker films (>6 equivalent monolayers) stoichiometric CeO₂ is detected in XPS. Vacuum annealing produces morphologically well-defined hexagonal islands, accompanied by partial reduction and the formation of oxygen vacancies at the ceria surface. The thermal stability and the degree of reduction is a function of the oxide layer thickness, with thinner layers being thermally less stable. At temperatures >800 °C, the ceria decomposes and Ce–Rh alloy phases are identified.     

New method to characterize mesoscopic range and very small strain with using multi-wave X-ray diffraction

A new technique to observe mesoscopic-range strain fields (up to several hundreds of nm) is proposed, using modulation of the crystal-truncation-rod (CTR) scattering caused by Bragg reflection. This technique is particularly sensitive to small, long-range strain fields near crystal surfaces and interfaces, which are usually difficult to be discriminated by using Bragg reflection. A simple interpretation can be made for the modulation profile: the technique is physically simple with a few parameters fitted to the data and, independently of any model, is able to determine the total displacement due to mesoscopic strain field for depths up to several hundreds of nanometers. We applied this method to a Si(0 0 1) wafer whose surface is covered with a thermal oxide layer 3 nm thick. On the basis of the expressions we obtained for the modulation profile a least-squares fitting was carried out to give a result that under the oxide layer there exists a total displacement of −0.16 Å. It was also revealed from the visibility of the modulation profile that the total displacement has a static fluctuation of at least ±0.13 Å in the lateral direction. The new method can be used for the correction of the errors of the X-ray standing wave (XSW) method produced by strained layers near crystal surfaces.     

Atomistic structure of stepped surfaces

Atomistic computer simulation with embedded atom method (EAM) interatomic forces was used to study the structure of surface steps on the {111} unreconstructed surface in fcc metallic materials. The energetics and local atomic relaxation behavior of ledges parallel to the 110 direction were studied using a potential describing lattice properties of Au. The vacancy formation energies in the stepped surfaces was also studied, and it was found that the energy of formation of a vacancy in a terrace is the same as that in the perfect unstepped surface. This value is 30% lower than that of the bulk. The vacancy formation energy in the ledge is reduced by a factor of two with respect to that of the terraces. The structure of the “up ledge” (A step) is different from the “down ledge” (B step). These differences do not significantly affect the energy of the ledges, although they do affect the vacancy formation energies in sites in the second surface layer near the ledge. The implications of the results for the formation of kinks and the general structure of high index surfaces are discussed.     

Epitaxial growth of μm-sized Cu pyramids on silicon

Triangular and quadratic Cu pyramids were epitaxially grown on Si(111) and Si(100) substrates, respectively, by pulsed laser deposition at elevated substrate temperatures above 200°C as well as by post-annealing of closed Cu layers prepared at room temperature. In both cases, three-dimensional pyramids with edge lengths of up to 9 μm were obtained, as observed by scanning electron microscopy and atomic force microscopy. Although the macroscopic shape is a pyramid, microscopically the islands consist of columnar grains (with lateral sizes of only about 50 nm at 260°C). The size and shape of the pyramids can be controlled by the substrate used, the amount of material deposited, and the temperature during deposition or annealing. Additionally, first hints were found that the pyramids can be aligned by structuring the substrate. The formation of such large pyramids is explained by a fast diffusion of Cu atoms on Si over distances of some μm and a high jump probability to higher pyramid layers.     

Corrugated single layer templates for molecules: From h-BN nanomesh to graphene based quantum dot arrays

Functional nano-templates enable self-assembly of otherwise impossible arrangements of molecules. A particular class of such templates is that of sp ² hybridized single layers of hexagonal boron nitride or carbon (graphene) on metal supports. If the substrate and the single layer have a lattice mismatch, superstructures are formed. On substrates like rhodium or ruthenium these superstructures have unit cells with ∼3-nm lattice constant. They are corrugated and contain sub-units, which behave like traps for molecules or quantum dots, which are small enough to become operational at room temperature. For graphene on Rh(111) we emphasize a new structural element of small extra hills within the corrugation landscape. For the case of molecules like water it is shown that new phases assemble on such templates, and that they can be used as “nano-laboratories” where many individual processes are studied in parallel. Furthermore, it is shown that the h-BN/Rh(111) nanomesh displays a strong scanning tunneling microscopy-induced luminescence contrast within the 3 nm unit cell which is a way to address trapped molecules and/or quantum dots.     

Electronic transport at semiconductor surfaces––from point-contact transistor to micro-four-point probes

The electrical properties of semiconductor surfaces have played a decisive role in one of the most important discoveries of the last century, transistors. In the 1940s, the concept of surface states––new electron energy levels characteristic of the surface atoms––was instrumental in the fabrication of the first point-contact transistors, and led to the successful fabrication of field-effect transistors. However, to this day, one property of semiconductor surface states remains poorly understood, both theoretically and experimentally. That is the conduction of electrons or holes directly through the surface states. Since these states are restricted to a region only a few atom layers thick at a crystal surface, any signal from them might be swamped by conduction through the underlying bulk semiconductor crystal, as well as greatly perturbed by steps and other defects at the surface. Yet recent results show that this type of conduction is measurable using new types of experimental probes, such as the multi-tip scanning tunnelling microscope and the micro-four-point probe. The resulting electronic transport properties are intriguing, and suggest that semiconductor surfaces should be considered in their own right as a new class of electronic nanomaterials because the surface states have their own characters different from the underlying bulk states. As microelectronic devices shrink even further, and surface-to-volume ratios increase, surfaces will play an increasingly important role. These new nanomaterials could be crucial in the design of electronic devices in the coming decades, and also could become a platform for studying the physics of a new family of low-dimensional electron systems on nanometre scales.     

Electronic properties of silicene in BN/silicene van der Waals heterostructures

Silicene is a promising 2D Dirac material as a building block for van der Waals heterostructures(vd WHs). Here we investigate the electronic properties of hexagonal boron nitride/silicene(BN/Si) vd WHs using first-principles calculations.We calculate the energy band structures of BN/Si/BN heterostructures with different rotation angles and find that the electronic properties of silicene are retained and protected robustly by the BN layers. In BN/Si/BN/Si/BN heterostructure, we find that the band structure near the Fermi energy is sensitive to the stacking configurations of the silicene layers due to interlayer coupling. The coupling is reduced by increasing the number of BN layers between the silicene layers and becomes negligible in BN/Si/(BN)_3/Si/BN. In(BN)_n/Si superlattices, the band structure undergoes a conversion from Dirac lines to Dirac points by increasing the number of BN layers between the silicene layers. Calculations of silicene sandwiched by other 2D materials reveal that silicene sandwiched by low-carbon-doped boron nitride or HfO_2 is semiconducting.     

Microstructured silicon surfaces for field emission devices

Enhanced field emission of electrons from silicon surfaces was obtained by surface microstructuring, by means of electrochemical oxidation in organic solutions containing HF. Morphological characterisations showed the formation of cylindrical rods, randomly distributed with relative spacing of a few microns. They are originated at the top of silicon pyramids and have typical diameter in the 100 nm range. Variable length in the 1–50 μm range was obtained, by adjusting the process parameters. Electron field emission properties were characterised for several samples, prepared in different conditions: the emission threshold was found to be strongly correlated with the overall charge exchanged during electrochemical oxidation. In the most favourable conditions, the threshold field for the emission of an electron current I_th = 10⁻¹⁰ A was 11.1 V/μm.     

Optical properties of laterally overgrown GaN pyramids grown on (1 1 1) silicon substrate

Optical properties of laterally overgrown GaN hexagonal pyramids on (1 1 1) Si substrates are studied by cathodoluminescence (CL) spectroscopy and mapping techniques. The results are compared with structural properties obtained by scanning and transmission electron microscopic techniques. To clarify the origin of the bandedge and yellow-band emissions from the GaN pyramids, wavelength-resolved CL properties of normal and cleaved GaN pyramids are investigated in the top and/or cross-sectional view configurations. The cross-sectional view CL images for cleaved GaN pyramid samples show significant differences between the overgrown areas on top of the mask and the coherently grown regions over the windows. A precise reverse (identical) contrast between bandedge (yellow-band) emission intensity and threading dislocation density is observed by comparing the cross-sectional view CL and transmission electron microscopic images. It is demonstrated that a strong correlation exists between structural defects and optical properties in laterally overgrown GaN hexagonal pyramids.