Numerical investigation of the enhanced unidirectional surface plasmon polaritons generator~Numerical investigation of the enhanced unidirectional surface plasmon polaritons generator~Numerical investigation of the enhanced unidirectional surface plasmon polaritons generator

A unidirectional surface plasmon polaritons （SPPs） generator with greatly enhanced generation efficiency is proposed. The SPPs generator consists of an asymmetric single nanoslit coated with a polyviny alcohol （PVA） film and a silver rectangle block. The generation efficiency of this SPPs generator is investigated using the finite difference time domain method. Due to the presence of the silver rectangle block, the SPPs generation efficiency of the asymmetric single nanoslit with PVA film can be greatly enhanced and the corresponding wavelength with the maximum enhancement factor can be tuned flexibly. The influence of the structural parameters on the generation efficiency is also investigated for the enhanced unidirectional SPPs generator.     

On the fictitious nonlinearity of the surface impedance of the Earth’s crust

The observations of Alfvén oscillations of the magnetosphere are used to study the Earth’s crust and upper mantle by the magnetotelluric sounding method. The sounding procedure involves the measurement of the horizontal components of the electromagnetic field at a given point on the ground, the calculation of the surface impedance, and the determination of the conductivity of rocks from these data. It has been shown that the anharmonicity of the oscillations of the magnetosphere in combination with the nonlocality of the boundary condition on the ground gives rise to the amplitude dependence of the impedance calculated using the classical magnetotelluric sounding method. This apparent nonlinearity of the impedance can be manifested in the sounding of the Earth’s interior with intense electromagnetic pulsations, which appear when the Earth’s magnetosphere is embedded in the highspeed solar wind flow.     

The effect of laser surface treatment of Al-Si alloy on the surface hardness and structure

In this paper, some samples of Al-Si alloy with various silicon content were treated by laser beam. The effects on structure, hardness and substructure of samples were investigated. The experimental results show that the primary crystal Al and eutectic silicon in the laser treated samples is got thinning obviously, the mosaic dimension is decreased and the dislocation density is increased.     

Effect of the reflection of underlying surface on sky radiance distribution

Sky radiance might be influenced by the multiple reflectance between the earth's albedo surface and the atmosphere. Based on the Lambert's law and the radiative transfer equation (RTE), a model is developed to calculate the additional sky radiance at wavelengths of 0.4-3μm due to the reflectance contribution of the underlying surface. The iterative method is used to calculate sky radiance without the reflectance from underlying surface. The hybrid modified delta-Eddington approximation is used to compute the atmospheric reflection of the radiation from the earth's surface. An interaction factor is introduced to deal with the multiple reflectance between the atmosphere and the underlying surface. The sky radiance increment is evaluated for some different albedos of the earth's surface. The results show that the sky radiance increment rises rapidly while viewing zenith angle is near to 90°, and the larger the albedo of the earth's surface is, the more obvious this effect appears.     

In-situ measurement of the surface temperature during holographic recording

Photo-induced processes in organic materials mostly occur on molecular levels.Excited molecules may split to form radicals,starting a polymerization process with diffusing monomers.The azo-dyes perform an optically induced cis-trans isomerization.During pattern formation like a holographic grating,the local temperature increase,especially in thin films,is up to date a subject of estimation from absorption and dissipation data.However,the exact knowledge of the surface temperature would help a lot in understanding the resulting refractive index and thickness patterns during holographic exposure.In this paper,in-situ pyrometer measurements are presented.As examples,different photosensitive materials, varying from a photopolymer to polycrystalline azo dyes,are used in order to outline the magnitude of this effect and demonstrate the feasibility of this technique.     

On the surface brightness radial profile of the extendedγ-ray sources

The morphology of the extendedγ-ray source is governed by the propagation process of parent relativistic particles.In this paper,we investigate the surface brightness radial profile of extendedγ-ray sources illuminated by cosmic ray protons and electrons,considering the radiation mechanisms,projection effects,and the response of instruments.We find that the parent particle species and the propagation process can cause considerable differences in the observed radial profiles.Thus,the surface brightness profile can be used as a unique tool to identify the radiation mechanism and the propagation process of the parent particles.In addition,we also discuss the possible implications regarding the latest discoveries from very/ultra-high energyγ-ray instruments like LHAASO and HAWC.     

Damping of the localized surface plasmon polariton resonance of gold nanoparticles

We report on a strong damping of the localized surface plasmon polariton resonance of gold nanoparticles. The ultra-fast dephasing time of localized surface plasmon polariton resonances in gold nanoparticles was systematically studied as a function of the particle size at a fixed photon energy of h ν=1.85 eV. Dephasing times ranging from T₂^expT_{2}^{\mathrm{exp}} = 5.5 fs to 15.0 fs were extracted and an influence of the reduced dimensions was detected. We have identified two dominant damping mechanisms: the well-known surface scattering and, for the first time, band structure changes. We have quantified the influence of these band structure changes on the optical properties by determining the essential damping parameter A to be A ^exp=0.32 nm/fs.     

Modeling the dynamics of one laser pulse surface nanofoaming of biopolymers

Self standing films of biopolymers like gelatine, collagen, and chitosan irradiated with single nanosecond or femtosecond laser pulse easily yield on their surface, a nanofoam layer, formed by a cavitation and bubble growth mechanism. The laser foams have interesting properties that challenge the molecular features of the natural extracellular matrix and which make them good candidates for fabrication of artificial matrix (having nanoscopic fibers, large availability of cell adhesion sites, permeability to fluids due to the open cell structure). As part of the mechanistic study, the dynamics of the process has been measured in the nanosecond timescale by recording the optical transmission of the films at 632.8 nm during and after the foaming laser pulse. A rapid drop 100→0% taking place within the first 100 ns supports the cavitation mechanism as described by the previous negative pressure wave model. As modeled a strong pressure rise (∼several thousands of bar) first takes place in the absorption volume due to pressure confinement and finite sound velocity, and then upon relaxation after some delay equal to the pressure transit time gives rise to a rarefaction wave (negative pressure) in which nucleation and bubble growth are very fast.     

A novel technique of laser measurement for the surface roughness

This paper describes a non-contact system for the surface roughness measurement without damage. It is suitable for various materials.     

Fast calculate the parameters of surface acoustic wave coupling-of-modes model

Accurate solutions of acoustic waves in piezoelectric substrate and metal film as layered structure were obtained. Phase velocity, electromechanical coupling coefficient and static capacitance were calculated based upon the solutions. Chen and Haus' theory was used to analyze surface acoustic waves in shorten gratings with single finger every period and a reflection coefficient expression of one strip was presented. Parameters of aluminum on X-112°Y LiTaO3 and gold on ST-quartz were calculated. The results agreed well with those from Ken-ya Hashimoto's theory. The reflection coefficient of gold on ST-quartz was measured to verify the theoretical result.     

Operation of the CSNS Penning surface H− ion source

The accelerator complex of the China Spallation Neutron Source (CSNS) consists of a H⁻ linear accelerator (linac) and a rapid cycling synchrotron (RCS). The linac contains a Penning surface H⁻ ion source. The designed energy and the beam current of the source are 50 keV and 20 mA respectively, with a normalized root mean square (norm. rms.) emittance of 0.2π mm mrad. The manufactures and tests of the discharge chamber are in great progress. The construction of H⁻ ion source test stand has been completed, and the operation of the source is also in progress. Stable H⁻ ion beams with energy of 50 keV and current up to 50 mA are attained. Emittance measurement for the H⁻ beam is being prepared.

     

Estimating the sound speed of the surface layer of the seabed using ocean ambient noise in shallow water

To improve the inversion efficiency, a method for quickly and directly estimating the sound speed of the surface layer of the seabed is proposed. According to the energy flux theory, the ocean ambient noise data received by the vertical line array can be used to extract the bottom loss(BL) passively. The BL curve has an effect on the critical angle, which is used to estimate the sound speed of the surface layer of the seabed. Based on the ray model,the difference between the BL calculated from t...     

Effects of the piezoelectric field on the modulation of exciton–polaritons by surface acoustic waves

Surface acoustic waves (SAWs) provide a powerful tool for the modulation of polaritons in GaAs-based microcavities. In this contribution, we compare the modulation introduced by SAWs propagating along piezoelectric and non-piezoelectric crystal directions of the sample surface. Strain calculations reveal that the type-I band-gap modulation induced by the strain field is comparable for both SAW types. Piezoelectric SAWs have, however, an intrinsic longitudinal electric field, which can dissociate quantum well (QW) excitons and, thus, degrade the modulation. Images of the polariton far-field photoluminescence reveal this behavior for different excitation conditions.     

“Quasi-Planck” spectra of capillary turbulence on the surface of liquid hydrogen

We report the first observation of “quasi-Planck” spectra of capillary turbulence on the surface of liquid hydrogen in the dissipation domain. Capillary waves have been driven by low-frequency random force. We have observed that the frequency spectrum of surface elevation changes its dependence from power-like 〈|η_ω²|〉 ∼ ω^−2,8 at middle-frequency domain to “quasi-Planck” distribution ∼e ^ω/ω _d at higher frequencies. The frequency ω _d is proportional to the boundary frequency between inertial interval and dissipation domain and it is scaled up with the increase of driving force.     

Effect of surface recombination on the amplitude spectrum of variable bias γ-counters

The form of the amplitude spectrum of a photoresistive counter is found by solution of the continuity equation for an infinite semiconductive plate with an instantaneous point source of nonequilibrium charge carriers and a specified surface recombination rate for these carriers and an additional assumption as to the character of -quantum absorption by the photoresistor material. It is thus shown to be possible to construct the spectrum with use of the response function formalism of [1, 2] for each of the signal formation processes (e-p pair generation, photoconductivity kinetics, imposition of equipment noise).Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 9, pp. 97–100, September, 1982.     

Influence of annealing on the structure of nanoporous oxide films on the surface of titanium‒aluminum powder alloy

Oxide films obtained during anodization of Ti?40% Al sintered powder samples in fluorine-containing electrolytes are investigated. With scanning electron microscopy and X-ray phase analysis, it is demonstrated that an X-ray amorphous nanoporous anodic oxide film is formed on the surface of the powder microparticles under optimal anodization conditions. After annealing at T = 1093 K in air and vacuum (10^?2 Pa), the oxide films are revealed to crystallize with its regular porous structure retained. The composition of the polycrystalline anodic-oxide films annealed in air is a mixture involving TiO₂ (anatase and rutile) and α- and γ-Al₂O₃ phases and Ti₂O₃ and Al₂TiO₅ traces. The vacuum annealing process makes it possible to identify TiO₂, in which anatase is the main phase, α- and γ-Al₂O₃, and Ti₂O₃ and TiO traces. However, rutile is not revealed. The presented results indicate that the application of the anodic nanostructuring of Ti?40% Al powders is promising for the obtainment of new photocatalytic active nanomaterials.     

Application of a recent solution of the Navier–Stokes equation to flow on the surface of a globe

We reduce an exact solution of the 3D Navier–Stokes equation (Muriel, 2011) [1] to two dimensions to model flow on the surface of a globe, producing the following results: (a) an analytic discovery of the time evolution of two streams, one each above and below the equator, (b) analytic speed-up of modeling bypassing iterative numerical simulation.     

Propagation of Alfvén surface waves along the ionospheric plasma slab with the effect of gravity

Ionospheric regions connecting the neutral gas atmosphere have been considered to be an incompressible plasma slab surrounded by incompressible plasma on one side and neutral gas on the other side. The effect of gravity on Alfvén surface waves in the slab geometry is studied. As a special case, the propagation of ASW along the plasma-neutral gas interface is also discussed. The existence of two modes of surface waves has been identified and their characteristic behaviour affected by the gravity has been discussed.