Anomalous bond-length behaviors of solid halogens under pressure

The three halogen solids(Cl_2, Br_2, and I_2) have the isostructural diatomic molecular phase I with a space group of Cmca at ambient pressure. At high pressure, they all go through an intermediate phase V with incommensurate structures before eventually dissociating into the monatomic phase II. However, a new structural transition between phase I and V with anomalous bond-length behavior was observed in bromine under pressure, which, so far, has not been confirmed in iodine and chlorine. Here, we perform first-principles calculations for iodine and chlorine. The new structural transition was predicted to be common to all three halogens under pressure. The transition pressures might be systematically underestimated by the imperfect van der Waals correction method, but they follow the order Cl_2 Br_2 I_2, which is consistent with other pressure-induced structural transitions such as metallization and the molecular-to-monatomic transition.     

Pressure-induced structural transitions in PbI2: A high-pressure Raman and optical absorption study

The effect of pressure on the 2H and 4H polytype of PbI₂ has been investigated by Raman and optical absorption spectroscopy, using the diamond anvil cell. The 2H-polytype undergoes pressure-induced phase transitions at 5 kbar and near 30 kbar. The 4H-polytype exhibits phase transitions near 8 kbar and above 30 kbar. The Raman modes abruptly change at these pressures. The optical absorption edge shifts red at the rate of 15±1 MeV/kbar in the 2H-PbI₂ and at the rate of 7 MeV/kbar in phase II. The latter phase is most likely to possess a 3d-structure and not a layer type. The possible structures for the high pressure phases are discussed.     

High pressure chemistry of molecular systems: Recent experimental results and developments

Abstract

It is widely recognized that relevant new chemistry is being discovered by applying high pressures. The study of the equation of state, pressure-induced phase transitions, reactivity, etc., of molecular systems are topics of increasing interest in high pressure science. This paper compiles recent studies performed by the author on molecular systems at high pressures. This includes, on the theoretical side, a reference to a universal model of EOS for both liquids and solids at high pressure. Several experiments performed by the author are also discussed; among others, a high pressure polymerization of carbon monoxide, the design of an anvil cell system developed in our laboratory, introducing an alternative Raman pressure scale when sapphires are mounted as anvils (SAC configuration) and, finally, several actual SAC experiments are presented, including examples of phase transitions and reactivity at high pressure on double and triple bonded molecular systems.     

压力下CaN_2结构稳定性和电子结构的第一性原理研究

通过运用基于密度泛函理论的第一性原理计算方法结合广义梯度近似对压力下CaN_2的结构稳定性和电子结构进行了理论研究.对结构稳定性的研究表明,ZnCl_2型结构是CaN_2在环境压力下最稳定的结构,而实验上观察到的CaC_2-I型结构是CaN_2高压下(8.7 GPa)的稳定性结构.在50 GPa的压力范围内,CaN_2将发生从ZnCl_2型结构到ThC_2型结构再到CaC_2-I型结构的两次压致结构相变,其相变压力分别为0.81 GPa和8.77 GPa.而对电子结构的研究表明ZnCl_2型、ThC_2型和CaC_2-I型三种结构的CaN_2都表现出了金属特征,三种结构CaN_2当中Ca-N键的离子-共价性特征和N原子间的N=N双键特征得到了确认.     

ZnSe相变、电子结构的第一性原理计算

基于第一性原理平面波赝势(PWP)和广义梯度近似(GGA)方法,对闪锌矿结构(ZB)和岩盐结构(RS)的ZnSe在0—20GPa高压下的几何结构、态密度、能带结构进行了计算研究,分析了闪锌矿结构ZnSe和岩盐结构ZnSe的几何结构.在此基础上,研究了ZnSe的结构相变、弹性常数、成键情况以及相变压强下电子结构的变化机理.结果发现:通过焓相等原理得到的ZB相到RS相的相变压强为15.3GPa,而由弹性常数判据得到的相变压强为11.52GPa,但在9.5GPa左右并没有发现简单立方相的出现;在结构相变过程中,sp3轨道杂化现象并未消除,Zn原子的4s电子在RS相ZnSe的导电性中起主要贡献.     

Structural phase transition in Bi2Te3 under high pressure

Structural change in Bi₂Te₃ under high pressure up to 16.6 GPa has been studied by powder x-ray diffraction. We observed two times of phase transitions at room temperature at the pressures of 8 and 14 GPa, respectively. According to our preliminary result on electrical resistance, it is reasonable to suppose that superconducting transition with T _c =2.8 K at the pressures of 10.2 GPa is observed in phase II. On the other hand, we found anomalies of the pressure dependences of lattice parameters and volume at around 2 GPa, which probably means the change in electrical structure on the Fermi surface.     

High pressure lattice dynamics, dielectric and thermodynamic properties of SrO

Using density functional theory and density functional perturbation theory we have studied the effects of hydrostatic pressure on lattice dynamics, dielectric and thermodynamic properties of the rocksalt (NaCl) and CsCl phases of SrO. The stability of the NiAs type structure, experimentally confirmed to be stable in BaO, is also investigated. Studying the lattice dynamics of the NaCl and CsCl phases at various pressures, in the range of the phase stability, we have found the lattice dynamical instabilities which govern the phase transitions between NaCl and CsCl phases with increasing and decreasing pressure. By monitoring the behaviour of the found soft modes, we have calculated the transition pressures upon compression and decompression of SrO crystal. Lattice dynamics calculations reveal that the rocksalt and CsCl structures are unstable with respect to the soft transversal acoustic modes at single points of the Brillouin zone, which points to the fact that the transitions are of displacive type. Responses to electric fields and thermodynamic properties at high pressures are also given and discussed. All our results are in a good agreement with experimental data where applicable.     

金属氢研究新进展

简要介绍了金属氢的研究意义和应用前景 ,详细评述了有关的高压实验方法和最近的研究成果及进展 ,特别是固体氢的相图、结构和相变 .近十多年来 ,随着超高压技术的发展 ,已能在金刚石对顶砧 (DAC)上产生30 0GPa的静态压力 ,并可进行高压原位实验研究 .对固体氢进行了高压拉曼、同步辐射X射线、光反射和吸收、同步辐射红外光谱等一系列高压物性和相变研究 .从而确定了固体氢的三个相 ,并提出了可能的相结构 .     

Pressure Effects in Phonon Modes and Structure of A II B 2 III C 4 IV Compounds and Combinations

A II B 2 III C 4 VI compounds have been prepared with A II =Zn, Cd, Mn, B III =In, and C VI =S, Se. These atomic substitutions induce modifications in the structure and frequency for some of the phonons. These compounds have been studied by Raman spectroscopy at ambient conditions and under hydrostatic pressures. All phonons appear in the spectral region below 400 cm m 1 . High-pressure measurements have shown the existence of soft modes. New modes seem to appear at high pressures due to the phonon splitting. All low frequency phonons of the Zn 0.6 Mn 0.4 In 2 S 4 compound show a sudden modification in the frequency dependence on pressure above ～2 GPa. Based on the Raman results we propose an assignment for the modes and try to extract information about the structure and the possible phase transitions.     

A theory of fusion of molecular crystals—II Phase diagrams and relations with solid state transitions

The theory of melting of molecular crystals with orientational degrees of freedom developed in a previous paper⁽¹⁾ is extended to cover disordering solid-solid transitions and complete phase diagrams for transitions under pressure. It is predicted that solid-solid and melting transitions should become second-order under certain conditions and also that a solid transition may appear at high pressures in some materials which show only a melting transition at zero pressure. The theory is compared with available experimental data.     

Pressure-induced phase transition of crystalline and amorphous silicon and germanium at low temperatures

Abstract

X-ray diffraction has been measured for crystalline silicon, crystalline germanium, amorphous silicon and amorphous germanium at temperatures down to 100 K and pressures up to 20 GPa using a diamond anvil cell and synchrotron radiation. The structural phase transitions, including amorphization, take place in the pressure-temperature range. It has been found that the structures after the phase transitions strongly depend on the path in the pressure-temperature diagram through which the system undergoes the phase transitions. For any of the aforementioned four materials, the high-pressure phase with the p-Sn structure is quenched during a release of pressure at 100 K, and transforms into an amorphous state when heated up to around 2 GPa. The path dependence of the states is discussed in relation to the pressure dependence of the heights of the energy barriers which have to be overcome when phase transitions occur. The effect of a structural disorder on the phase transition is also discussed by comparing the experimental results for the crystalline and amorphous materials.     

First-principles calculations of structure and high pressure phase transition in gallium nitride

The phase transitions of semiconductor GaN from the Wurtzite (WZ) structure and the zinc-blende (ZB) structure to the rocksalt (RS) structure are investigated by using the first-principles plane-wave pseudopotential density functional method combined with the ultrasoft pseudopotential scheme in the generalized gradient approximation (GGA) correction. It is found that the phase transitions from the WZ structure and the ZB structure to the RS structure occur at pressures of 46.1 GPa and 45.2 GPa, respectively. The lattice parameters, bulk moduli and their pressure derivatives of these structures of GaN are also calculated. Our results are consistent with available experimental and other theoretical results. The dependence of the normalized formula-unit volume $V/V_{0 }$ on pressure $P$ is also successfully obtained.     

Phase transitions of lanthanide monophosphides with NaCl-type structure at high pressures

Lanthanide monophosphides LnP (Ln = La, Ce, Pr, Nd, Sm, Gd, Tb, Tm and Yb) with a NaCl-type structure have systematically been prepared at high temperatures. Using synchrotron radiation, X-ray diffractions of LnP have been studied up to 61 GPa at room temperature. The NaCl---CsCl transition for CeP is found at around 25 GPa. First-order phase transitions of LnP (Ln = La, Pr and Nd) with the crystallographic change occur at around 24, 26 and 30 GPa, respectively. The structure of the high pressure phases of these phosphides is a body center tetragonal structure (Ln: 0, 0, 0; P: 1/2, 1/2, 1/2; space group P4/mmm), which can be seen as the distorted CsCl-type structure. The Pr---P distance in the high pressure form of PrP is 2.789 Å. This almost agrees with the sum of covalent radii of Pr and P. The Pr---P bond has the covalent character at very high pressures. Similar results are also obtained for LaP and NdP. The pressure-induced phase transitions of SmP, GdP, TbP, TmP and YbP occur at around 35, 40, 38, 53 and 51 GPa, respectively. The structure of the high pressure phase is unknown. The phase transitions of LnP with many f-electrons are not due to the mechanism of the ordinary NaCl---CsCl transition. The transition pressures of LnP increase with decreasing the lattice constants in the NaCl-type structure, which decrease with increasing atomic number of the lanthanide atoms.     

Changes in the crystalline structure of chlorpropamide at high pressures and temperatures

The crystalline structure of chlorpropamide is studied by the X-ray diffraction method at high pressures up to 4.2 GPa and in the temperature range 300–450 K. At normal pressure and upon heating to its melting point T = 396 K no phase transitions are found in chlorpropamide. When the initial α form of chlorpropamide is recrystallized, the appearance of a polymorphic ε phase is observed. After recrystallization, the high pressure effect causes partial amorphization of chlorpropamide at pressures of P ～ 3 GPa. Baric and temperature coefficients are obtained for the α and ε forms of chlorpropamide.     

Intermediate structures in two-dimensional molecular self-assembly

We discuss the occurrence of transition structures observed in molecular self-assembly at surfaces. The increasing surface coverage transitions from low coverage structures to high coverage structures are a common phenomenon. However, often observed and not perfectly understood is the formation of intermediate structures, sometimes with lower lateral density than the initial phase. We will present different examples from our recent work and discuss the possible mechanisms of intermediate phase formation. In addition, we present intermediate structures occurring due to temperature-controlled reversible phase transitions.     

Pressure-induced phase transitions in the ZrXY (X= Si,Ge, Sn;Y= S,Se, Te) family compounds

Pressure is an effective and clean way to modify the electronic structures of materials, cause structural phase transitions and even induce the emergence of superconductivity. Here, we predicted several new phases of the ZrXY family at high pressures using the crystal structures search method together with first-principle calculations. In particular, the ZrGeS compound undergoes an isosymmetric phase transition from P4/nmm-I to P4/nmm-II at approximately 82 GPa. Electronic band structures show that all the high-pressure phases are metallic. Among these new structures, P4/nmm-II ZrGeS and P4/mmm ZrGeSe can be quenched to ambient pressure with superconducting critical temperatures of approximately 8.1 K and 8.0 K, respectively. Our study provides a way to tune the structure, electronic properties, and superconducting behavior of topological materials through pressure.     

High pressure phase transition in super-cell LiBH4: An ab initio prediction

LiBH₄ which have attracted considerable attention from researchers due to the crystal structure characteristics is a metal hydride that can bind four hydrogen atoms. LiBH₄ which has high gravimetric and volumetric hydrogen density shows phase transitions at high pressures. In this regard, we created and analyzed LiBH₄ structure based on the first principles calculations, and then obtained the super-cell LiBH₄ structure. We achieved the phase transitions up to 20 GPa pressure with 2 GPa regular intervals for the super-cell LiBH₄. We observed the Pnma to Pnma*, Pnma* to P2₁/c, and P2₁/c to C2/c phase transitions and calculated the volume contractions accompanying these phase transitions. According to the obtained volumetric values, one can conclude that LiBH₄ can minimize the volumetric requirements of the hydrogen storage for systems that can be used at high pressures. Thus, the hydrogen storage capacity of LiBH₄ may increase at particular phases.     

First stages of the deposition of bismuth on copper examined by LEED: II. The (111) substrate

Three ordered overlayer structures are observed after evaporation for different times onto the (111) substrate. They are interpreted as monolayers with different densities: I, adsorption in sites of high coordination; II, a dense pseudo-square arrangement of bismuth atoms; III, a compact hexagonal arrangement. Structure III is only observed at high coverage and above 245°C. A reversible transformation occurs between II and III for a limited range of coverage. When they exist alone both structures II and III show melting type transitions. A schematic surface phase diagram is established.     

High pressure study of phase transitions inα-FePO4

High pressure behaviour of FePO₄ in berlinite form has been investigated up to 10 GPa using vibrational Raman spectroscopy and energy dispersive x-ray diffraction. Combination of these techniques along with studies on pressure quenched samples reveal structural transitions in this material from its room pressure trigonal phase to a disordered and a crystalline phase near 3±0.5 GPa. The latter is the Cmcm phase which is the equilibrium structure at high pressures. These high pressure phases do not revert back to its initial structure after release of pressure. Irreversibility of these transformations indicates that FeO₄ tetrahedra do not regain their initial coordination. These high pressure transitions can be rationalized in terms of the three level free energy diagram for such systems.     

Structural instability of PbSe/SnSe superlattices under pressure

Abstract

PbSe/SnSe superlattice, phase transition, high pressure, SR x-ray diffraction)

Synchrotron x-ray diffraction experiments have revealed successive phase transitions in epitaxially-grown PbSe/SnSe superlattices. The transition pressures from the low-pressre cubic B1- to the high-pressure orthorhombic B16-type structures are observed to vary systematically depending upon thickness of the PbSe layer. For example, a [PbSe(36A)/SnSe(12A)]₁₉, with the B1 structure in both layers stabilized in its asgrown state, undergoes the [B1/B1]-to-[B1/B16] and [B1/B16]-to-[B16/B16] structural transitions at 1.9 and 3.8GPa, respectively. This result is in contrast to their bulk data that the B1-to-B16 transition takes place at 5.3GPa in PbSe while the B16 phase is stable in SnSe at atmospheric pressure.