A representation of Kerr-like nonlinearity for the analytical TM surface polariton solution

The TM-polarized waves propagating along the interface between a nonlinear Kerr-like material and linear cladding are investigated. We analyse the nonlinear dielectric permittivity as a function of the electromagnetic field. It is shown that an exact analytical solution of Maxwell's equations corresponding to the TM surface polariton in the form described by sech function do exist in a Kerr-like nonlinear medium with the permittivity profile given by a hypergeometric function. We compare our analytical solution and analogous exact numerical solution in a Kerr medium. The power flow down the interface between two media is also discussed.     

Negative shift of a light beam reflected from the interface between optically transparent and resonant media

The lateral shift of a light beam reflected from the interface between an optically transparent dielectric and a medium for which the frequency dependences of the real and imaginary parts of the permittivity have a resonant form is investigated. At certain radiation frequencies and angles of incidence, a negative displacement of the reflected beam along the interface takes place.     

Response properties at the dynamic water/dichloroethane liquid–liquid interface

ABSTRACT

We present a novel approach for calculating the static dielectric permittivity profile of a liquid–liquid interface (LLI) from molecular dynamics simulations. To obtain well-defined features, comparable to those observed at solid–liquid interfaces, we find it essential to reference to the instantaneous liquid–liquid interface rather than the more commonly used average Gibbs interface. We provide a coarse-grained approach for the practical definition of the instantaneous interface and present numerical results for the prototypical water/1,2-dichloroethane system. These results show that the parallel components of the dielectric permittivity tensor can be accurately extracted. In contrast, the perpendicular component does not converge to the correct bulk value at large distances from the LLI, highlighting a flaw in the regularly applied coarse-graining procedure.     

Synthesis and characterization of PLZT thin films obtained by pulsed laser deposition

Thin films of Pb_1-xLa_x(Zr_0.65Ti_0.35)_1-x/4O₃ with x=0.09 (PLZT 9/65/35) have been grown by pulsed laser deposition (PLD) and by PLD assisted by radio frequency (RF) discharge in oxygen which increases the plasma reactivity and reduces the oxygen vacancies in films and at the film-bottom electrode interface. Significant compositional, structural and dielectric differences have been found among samples grown in the same deposition conditions excepting for RF power. Films grown by RF-assisted PLD have less pyrochlore and are more oriented. For these films dielectric permittivity vs. temperature variation was typical of relaxor ferroelectrics and the temperature of the dielectric maximum was close to that obtained in bulk, but the permittivity value was much lower. This was attributed mainly to the influence of a low permittivity interface layer and to the detrimental effect of pyrochlore phase, still present in small quantities even in the films obtained by RF-PLD. The dielectric behavior of films grown without RF discharge was very different: no dielectric anomaly was observed, only a step increase above 180 °C. Moreover much higher dielectric loss was measured for these films. PACS 84.15.Fg; 77.84.-s; 77.22.Gm     

Cobalt iron-oxide nanoparticle modified poly(methyl methacrylate) nanodielectrics

In this paper, we report the dielectric properties of composite systems (nanodielectrics) made of small amounts of mono dispersed magnetic nanoparticles embedded in a polymer matrix. It is observed from the transmission electron microscope images that the matrix polymeric material is confined in approximately 100 nm size cages between particle clusters. The particle clusters are composed of separated spherical particles which comprise unconnected networks in the matrix. The dielectric relaxation and breakdown characteristics of the matrix polymeric material are altered with the addition of nanometer size cobalt iron-oxide particles. The dielectric breakdown measurements performed at 77 K showed that these nanodielectrics are potentially useful as an electrical insulation material for cryogenic high voltage applications. Finally, structural and dielectric properties of nanocomposite dielectrics are discussed to present plausible reasons for the observed low effective dielectric permittivity values in the present and similar nanodielectric systems. It is concluded that polymeric nanoparticle composites would have low dielectric permittivity regardless of the permittivity of nanoparticles are when the particles are coordinated with a low dielectric permittivity surfactant.     

Temperature studies of dielectric permittivity and mass density pretransitional anomalies in binary mixtures

Results of temperature studies of dielectric permittivity and mass density in binary mixtures are presented. The anomaly of dielectric permittivity as a function of temperature in nitrobenzene-n-alkanes binary mixtures has been studied. Molar dielectric permittivity which takes into account the anomaly of dielectric permittivity and the mass density anomaly has been introduced.     

Electrostatic potential in cylindrical dielectric media using the image charge method

We derive a simple analytical expression for the electric potential produced by a point charge in a cylindrical pore with relative permittivity different from that of the surrounding medium. The interface between the pore and the surrounding media may contain electric charge or be electrically neutral. The expression reduces to the known solutions when the surrounding dielectric medium is identical to the pore or an electric conductor. We discuss the convergence of the series expansion and numerically evaluate the electrostatic potential inside the cylindrical pore. The calculated potential shows the effect of the dielectric permittivity difference of the media. The results demonstrate that the expression can be implemented in a numerical dynamic simulation of charged systems in cylindrical geometry. We also give an expression for the case when the source charge is in the medium outside the cylinder.     

Surface electromagnetic waves in a Fermi liquid

Surface electromagnetic waves propagating along a Fermi liquid-dielectric interface are investigated. A dispersion relation for the surface waves is obtained, and the frequency range of their existence is determined. The possibility of determining the contribution of a Fermi liquid to the dielectric permittivity of a metal from experiments on excitation of surface electromagnetic waves is shown.     

Optics of magnetoelectric media in the presence of a magnetic field and a spatial dispersion of the dielectric permittivity

Influence of an external magnetic field and a spatial dispersion of the dielectric permittivity on the irreversibility of waves in magnetoelectric media is considered. Features of the azimuth inhomogeneity at the simultaneous anisotropy of the dielectric permittivity and magnetic permeability in these media are studied.     

Enhancement of electron density in the interaction of high-power electromagnetic waves with inhomogeneous magnetized plasma

Propagation characteristics of a high-power electromagnetic wave through an inhomogeneous magnetized plasma is investigated. Considering the momentum transfer equations for electrons and ions and taking into account the ponderomotive force, the distribution of electron density and dielectric permittivity are obtained. Using non-linear dielectric permittivity and Maxwell's equations in the absence of external current and charge densities, non-linear wave equations are achieved. The results indicate that the external static magnetic field can modify the profiles of both the electric and magnetic fields. It is also shown that the external static magnetic field enhances the amplitude of the electron density and the non-linear dielectric permittivity.     

Microwave measurement of the permittivity of ferroelectric films by electrodeless and coplanar waveguide methods

Ferroelectric films on dielectric substrates prepared by reactive rf sputtering have been studied. The temperature and external electric field dependencies of the permittivity of the films are deduced. It is shown that deposition of metallic electrodes onto the surface of the film leads to an increase in the permittivity and to an enhancement of the dependency of on temperature and the external electric field. The observed effects may be explained by the formation of an electrode-film interface layer.Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 4, pp. 8–12, April, 1990.     

Effect of surface modification on dielectric and magnetic properties of metal powder/polymer nanocomposites

Metal nanopowder (Co and Fe)/polymer composites, both with and without surface modification by behenic acid, were fabricated and their dielectric and magnetic properties were measured at 1 GHz to study the effect of surface modification on the electromagnetic properties. The relative permittivity and the real part of the permeability of the composites with surface modified powders were higher than those with unmodified powders. Related dielectric losses remained at almost the same level, but magnetic losses were somewhat increased. The increase of relative permittivity could result from the increased volume fraction of interphase with a slightly higher relative permittivity at the particle/polymer interface than that of the bulk polymer. The increase in the real part of the permeability may be caused by suppression of the induced demagnetizing field due to suppression of eddy currents by a better particle distribution and a decrease in effective agglomerate size because of the surface modification.     

Comprehensive studies on dielectric properties of p-methoxy benzylidene p-decyl aniline with function of temperature and frequency in planar geometry: A potential nematic liquid crystal for display devices

The dielectric properties of the nematic mesophase, p-methoxy benzylidene p-decyl aniline(MBDA), measured in planar geometry with a function of frequency and temperature are investigated in detail. The complex dielectric permittivity(ε' and ε') is also studied at a bias voltage of 10 V for planar aligned sample cell of nematic mesophase. The dielectric permittivity with bias voltage attains a higher( 2 times) value than that without bias voltage at a temperature of 56℃,which is due to the fact that the linking group of nematic molecules is internally interacted with an applied bias voltage.This is supported by observing an enhanced dielectric permittivity of nematic liquid crystal(LC) in the presence of bias voltage, which can be fully explained as the increasing of the corresponding dipole moment. The dielectric relaxation behaviors of nematic LC are also demonstrated for planar aligned sample cell. The remarkable results are observed that the relaxation frequency shifts into low frequency region with the increase of the bias voltage applied to the planar aligned sample cells. The dielectric relaxation spectra are fitted by Cole–Cole nonlinear curve fitting for nematic mesophase in order to determine the dielectric strength.     

薄板型介质材料复介电常数的无损测量

采用带法兰结构的TE01n圆柱谐振腔,用无损检测的方法测量薄板型微波介质材料的复介电常数。利用轴向模式匹配法对谐振腔内的电磁场进行了求解,给出了相对介电常数和损耗角正切的计算公式,并利用矢量网络分析仪对几种常用微波介质材料进行了测量,其结果表明:该测量方法对相对介电常数的测量误差不超过1%,而对损耗角正切的测量误差不超过10%。该方法还具备一腔多模的测试能力,测量频率可调,可用于介质材料频率特性的测量。     

Magnetic field tuning of polaron losses in Fe doped BaTiO(3) single crystals

Artificial tuning of dielectric parameters can result from interface conductivity in polycrystalline materials. In ferroelectric single crystals, it has already been shown that ferroelectric domain walls can be the source of such artificial coupling. We show here that low-temperature dielectric losses can be tuned by a dc magnetic field. Since such losses were previously ascribed to polaron relaxation we suggest this results from the interaction of hopping polarons with the magnetic field. The fact that this loss alteration has no counterpart in the real part of the dielectric permittivity confirms that no interface is involved in this purely dynamical effect. The contribution of mobile charges hopping among Fe-related centers was confirmed by ESR spectroscopy, showing a maximum intensity at ca T?～?40?K.     

Dielectric tensor elements for the description of waves in rotating inhomogeneous magnetized plasma spheroids

The dielectric permittivity tensor elements of a rotating cold collisionless plasma spheroid in an external magnetic field with toroidal and axial components are obtained. The effects of inhomogeneity in the densities of charged particles and the initial toroidal velocity on the dielectric permittivity tensor and field equations are investigated. The field components in terms of their toroidal components are calculated and it is shown that the toroidal components of the electric and magnetic fields are coupled by two differential equations. The influence of thermal and collisional effects on the dielectric tensor and field equations in the rotating plasma spheroid are also investigated. In the limiting spherical case, the dielectric tensor of a stationary magnetized collisionless cold plasma sphere is presented.     

Modelling of isotropic double negative media for microwave applications

A composite medium consisting of two sublattices of dielectric spherical particles of high permittivity and different radii embedded in a dielectric matrix of smaller permittivity are considered. It has been shown that such a composite medium reveals properties of an isotropic double negative media (DNG) in a limited frequency range, when resonance oscillations of H_III mode in one kind of particles and E_III mode in another kind of particles are excited simultaneously. The E_III resonance and the H_III resonance give rise to the magnetic dipole momentum and the electric dipole momentum correspondingly. Averaging the magnetic momentum and the electric momentum over the cells belonging to the appropriate spherical particles gives the negative permittivity and permeability. The model of diffraction of a plane electromagnetic wave on a dielectric sphere is presented and compared with the mixing rule based consideration. The results obtained are rather close. Distribution of the electromagnetic wave outside the sphere is calculated. Influence of the dispersion of the sphere size and the dielectric permittivity on the effective parameters of the DNG material is estimated.     

Surface electromagnetic waves in thin-layer biaxial structure in a magnetic field

The conditions for the existence of surface electromagnetic waves at the planar interface between a homogeneous medium (vacuum) and a thin-layer periodic structure consisting of alternating semiconductor and dielectric layers in an external magnetic field have been investigated. This structure represents an optically biaxial crystal with the effective permittivity tensor components dependent both on the geometric parameters of the structure and on the physical characteristics (magnetic field strength, frequency, and thicknesses of the layers). It has been shown that the propagation of surface electromagnetic waves localized near the interface can occur in the thin-layer biaxial structure within specific ranges of frequencies and external magnetic field strengths.     

Optical guided waves at graded metal-dielectric interfaces

Waveguides at interfaces with a linearly graded permittivity between a metal and a dielectric are studied. Analytic expressions for the dispersion relations, modes, losses, and cutoff wavelengths are derived and agree well with simulations. The gradation results in anomalous dispersion, a reduction in the energy velocity, and increased field confinement in the metal-dielectric transition region. These effects lead to increased propagation losses, which are sensitive to the spatial extent of the interface gradation.